Reuse of 0IC_C03 Inventory cube

Hello All,
In our BI system, Inventory cube 0IC_C03 was installed and data load was happening for the same in 2007 and 2008.
Now Source system is changed and now we want to load data from new system.
what all are the steps, to reuse 0IC_C03 .
Regards,

Hello ,
We don't want to archive 2007 and 2008 data.
We will delete that data from cube.
But now we want to fetch data from new source system .
I could see many forums and articles on net regarding installation of inventory in BI, But as Inventory cube is already installed in our case,what are the exact steps we need to follow.
Regards,

Similar Messages

Performance query on 0IC_C03 inventory cube

Hello,
I am currently facing performance problems on this cube. The query is on material groups so the number of row returned are not to high.
The cube is compressed. Could aggregates be a solution, or does this not work well on this cube because on the non-cumulative key figure?
Does anyone have any hints on speeding this cube up? (the only tip I see in the collective note is to always compress)
Best regards
Jørgen

Hi Ruud,
Once compression with Marker update, latest balances will be created automatically for inventory cube: 0IC_C03.
Historic moments only required to show stock status for any historic date(eg: 02-01-2008).
If user not interested to check 3 years old status of stock, old data can be deleted selectively from cube using selective deletion.
Go through doc: [How Tou2026 Handle Inventory Management Scenarios in BW|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328?overridelayout=true]
Srini

Step by Step Loading data to ( 0IC_C03) inventory cube

Hi Guys ,
We are loading data to inventory cube today ( 0IC_C03) .Can you please let me know the steps to load the data .I have some documents but every document is having a different procedure .
Regards
Santosh

Hi,
http://wiki.sdn.sap.com/wiki/display/BI/StepbyStepLoadingDatatoInventory+Cube
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/906b837a-0d54-2c10-08b8-bde70337547e?QuickLink=index&overridelayout=true
Thanks
BVR

Batch Creation Date as a Virtual Characteristic in 0IC_C03 Inventory Cube

Dear Experts
Currently we have a Stock Aging report based on Document date. But our management requirement is Batch date wise.
Currently I am having Batch Creation date as an Attribute of 0Material info Object.
Is it possible to create a Virtual Characteristic for Batch Date and Include in the Cube?
If Possible please explain me the Procedure to Create Characteristic.
Thanks in Advance.
Viru
Edited by: Lankem-IT on Apr 15, 2011 3:43 PM

Refer link
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30f15839-0cf1-2b10-c6a7-ebe68cc87cdc?QuickLink=index&overridelayout=true
& check ur e-mail.

Inventory cube 0IC_C03 ,Stock on particular date

Hi All,
 We are trying to get the stock on a particular date using cube 0IC_C03 ,but we are unable to get the total stock on a given date.
1)Ex: I want stock on 01.12.2009 ,but in the query output I am getting null values.
I am only getting the total stock quantity on the loaded date for ex:04.01.2010(which is my data loading date in to the cube).
2)And when we restrict 0calday with <=01.12.2009 ,i have to get the total stock till 01.12.2009
Thanks&regards,
Sunitha

Hi,
Check
Treatment of historical full loads with Inventory cube
Setting up material movement/inventory with limit locking time
1)Ex: I want stock on 01.12.2009 ,but in the query output I am getting null values.
 I am only getting the total stock quantity on the loaded date for ex:04.01.2010(which is my data loading date in to the cube).
For 2LIS_03_BX it will give the extracted date only
2)And when we restrict 0calday with <=01.12.2009 ,i have to get the total stock till 01.12.2009
try with below options.
Use :
0VALSTCKVAL " for Value
0VALSTCKQTY " for Qty
0CALMONTH " for Month
Use the above combinations in New Selections in columns and go it.
For Qty Opening:
New Selection bad drag abd drop following things
0VALSTCKQTY " for Qty
0CALMONTH " for Month and restrict with less then or equalto option variable (single value, user input) and set the offeset
 value = -1 bcoz if user will give 12.2009 , so it will display 11.2009 closing stock, this is opening for 12.2009.
For Qty Closing:
New Selection bad drag abd drop following things
0VALSTCKQTY " for Qty
0CALMONTH " for Month and restrict with less then or equalto option variable (single value, user input) .
In the same way build for Value and other Keyfigures on 0IC_C03.
And
Drag & drop
0MATERAIL
0PLANT " Give some Input Variable.
See the steps.
Treatment of historical full loads with Inventory cube
Setting up material movement/inventory with limit locking time
If it is BI 7 then for BX in in DTP in Extraction Tab you need to select Extacrion mode = NON-Cumulative option.
Thanks
Reddy

No Selective Deletion on Inventory Cube 0IC_C03 via Calendar Day

Hi,
I need to repair my Inventory Cube 0IC_C03 for a certain date. To do that, I need to perform a Selective Deletion on the Cube and perform a FULL REPAIR REQUEST limited on that day only.
But to my surprise, I could not find a Calendar Day entry in the "DeletionSelection".
Is there a workaround or do I need to switch on anything?
--Jkyle

Hi Roberto,
You are too humble! Everybody knows you are the ONE
(he heh from the MATRIX movie)
Anyway, I dont think Export Datasource would help. As you may know, Inventory Cube 0IC_C03 uses 2LIS_03_BX and 2LIS_03_BF data sources. This CUBE is somehow special.
To cut this problem short, I'll go straight to the point. How could I perform INIT via 2LIS_03_BX and 2LIS_03_BF w/o R/3 downtime at all? The reason I came to this Selective Deletion thing is to patch up the mess the INIT would introduce when there are users around by using a REPAIR FULL REQUEST only for that single day...
I hope you get what I mean...
Thanks!
--Jkyle

Selective Deletion on Inventory Cube 0IC_C03 via Calendar Day

Hello Group
I am trying to do a selective delete to our inventory cube 0IC_C03 and found there is not an option to select day.
Does anyone have any thoughts on how do delete using day? Please note that my cube has been compressed and I do not have a request in the cube.
Thanks
Frank

Hi Frank,
REPORT ZRSDRD_SEL_DELETION                     .
DATA:
    l_thx_sel   TYPE rsdrd_thx_sel,
    l_sx_sel    TYPE LINE OF rsdrd_thx_sel,
    l_s_range   LIKE rsdrd_s_range,
    l_t_range   TYPE rsdrd_t_range,
    l_t_msg     TYPE rs_t_msg.
******************* 0CALDAY *****************
l_s_range-sign   = 'I'.
l_s_range-option = 'EQ'.
l_s_range-low    = '20030308'.
*l_s_range-high   = .
l_s_range-keyfl = 'X'.
APPEND l_s_range TO l_t_range.
l_sx_sel-iobjnm   = '0CALDAY'.
l_sx_sel-t_range = l_t_range[].
INSERT l_sx_sel INTO TABLE l_thx_sel.
CLEAR l_s_range.
REFRESH l_t_range.
************** 0PLANT **********************
l_s_range-sign   = 'I'.
l_s_range-option = 'EQ'.
l_s_range-low    = 'PLNT'.
*l_s_range-high   = .
l_s_range-keyfl = 'X'.
APPEND l_s_range TO l_t_range.
l_sx_sel-iobjnm   = '0PLANT'.
l_sx_sel-t_range = l_t_range[].
INSERT l_sx_sel INTO TABLE l_thx_sel.
CLEAR l_s_range.
REFRESH l_t_range.
************** 0MATERIAL ****************
l_s_range-sign   = 'I'.
l_s_range-option = 'EQ'.
l_s_range-low    = 'MATERIAL'.
*l_s_range-high   = .
l_s_range-keyfl = 'X'.
APPEND l_s_range TO l_t_range.
l_sx_sel-iobjnm   = '0MATERIAL'.
l_sx_sel-t_range = l_t_range[].
INSERT l_sx_sel INTO TABLE l_thx_sel.
CLEAR l_s_range.
REFRESH l_t_range.
CALL FUNCTION 'RSDRD_SEL_DELETION'
     EXPORTING
          I_DATATARGET      = 'ZICRT_C37'
          I_THX_SEL         = L_THX_SEL
          I_AUTHORITY_CHECK = 'X'
          I_THRESHOLD       = '1.0000E-01'
          I_MODE            = 'C'
          I_NO_LOGGING      = ''
          I_PARALLEL_DEGREE = 1
          I_NO_COMMIT       = ''
     CHANGING
          C_T_MSG             = L_T_MSG.

Difference between Inventory cube 0IC_C03 and 0CP_IC_C1

Hi Gurus
I'd like to ask what's the difference between this 2 cubes in inventory? 0IC_C03 and 0CP_IC_C1 ? Any help will be much appreciated. Thanks in advance
- Kit

Hi,
Well I am not an expert on Inventory but this is what I know:
0IC_C03 - LO Cockpit cube - Standard Inventory qty and values. This can be used for all purpose on a generic basis. This is not customized for any specific Industry sector. A standard ECC can use this as well as Retail can use this.
0CP_IC_C1 - This is also an Inventory cube containing value and quantities but this is more specifically designed for CP industry sector (Consumer Products). Here the BW transaction keys are different meaning that events/movement types specific to CP industry transactions will generate these transaction keys which gets updated to BW.
Also the cube 0CP_IC_C1 KPIs are average figures on the stock quantities and values (Exception Aggregation: Average Over Calendar Days). Whereas in 0IC_C03 the KPIs (NCKFs) are based on last value (Exception Aggregation: Last for Calendar Days)
Therfore if you are not aiming at Consumer Products Industry specific implementation, I would recommend 0IC_C03 cube.

Query on Inventory Cube 0IC_C03

Hi All
When running a query on Inventory Cube, I get some of the values like this "[2,000]" and the value is not taken into account in the total row.
Any Idea about the "[Value]"?
Thanks
Dror Golani

Hi,
Probably it could be a NUMC data type.Just check.
venkat

Damaged inventory cube 0IC_C03

Hi all,
          My inventory cube is damanged because some data is not loaded via delta.
what i done is i stopped the back ground job which is running for compression of the request.i done Init with full repair request loaded missing data.(_03_BF). full load.
         now my question is setting up marker for BF . my opening stock is around 2006. I loaded from 02.2007 to till the date. It is not a historical data(Because it after 2006). current data.
can i do compression with marker or without marker.
pls help me this is very important for me.
thanks .

Hi
About the Marker - understood........I did....without checking it.   that is not the issue. Please see below the detail of the error log. Listcube does not show any entries. the range of posting dates i loaded was 1/1/2000 to 1/10/2010....valuated stock only..........
this is the error message..........
Multiple entries found with NCUMTIM 'unlimited'; compression not possible
Message no. DBMAN380
Diagnosis
The time dimension contains multiple entries for which the time
reference characteristic (NCUMTIM) is set to 'unlimited'.
The value 'unlimited' is the maximum possible value for the time
reference characteristic. This value is reserved for markers in
non-cumulative InfoCubes and cannot be used for standard transaction
records.
System Response : Compression is terminated.
Procedure : Contact your system administrator.
Procedure for System Administration
To allow compression to be carried out, the entries must first be
removed from the InfoCube.
To do this, you can proceed as follows:
1. Delete all packages that contain records in which the time reference
characteristic has the value 'unlimited'. You can identify these
packages by using transaction LISTCUBE.
2. Reload these packages and create a rule in the transformation that
maps the value 'unlimited' to a year before 9000.
3. Using transaction RSRV, then delete all entries that are no longer
used from the time dimension.
The InfoCube can be compressed again.

DataMart from Inventory Cube (0IC_C03)

I want to use the daily inventory cube to data mart and load to a cube/ods otherwise. I am aware that the values of non cumulative kf will not be available but that is okay I need the value of the cumulative kf.
Is there any issues or problems that people can see if I data mart from this cube? Thanks

Hi Niten,
Check this link:
http://help.sap.com/saphelp_nw04/helpdata/en/8f/da1640dc88e769e10000000a155106/content.htm
Also check the Integartion (last) section in this link:
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a62dee07211d2acb80000e829fbfe/frameset.htm
Bye
Dinesh

Inventory cube non cumulative KF displaying incorrectly.

Hi
I have created a inventory cube which is a copy of 0IC_C03, fed from a DSO which has the all the Material documents.
I have intitialised using the BX extraxctor to the cube, then loading data from r/3 via the dso. Have MP on top of inventory and revaluation cube.
Due to an error in the code logic i had to drop the cube and reload the data from the BX PSA and subsequently the DSO.
my problem started then, the cumulative key figure have gone haywire ie they the balance display rubbish data. the data loaded into the cube is correct
also if I delete the latest request and reload the request, then the KF display correctly. strange!
I also the same problem for value as i have a revaluation cube. the inventory values are wrong, when i do a list cube from the MP all is ok.
i checked the validity slice rsdv, it is ok.
i also only have 0calday as the non cumulative setting.
Another thing i noticed was if filter the material by one plant then i get the correct value, if i try to display all plants then it all the balances go incorrect.
also if i see the balances by month only the latest month is incorrect.
if you need more info please feel free to ask.
appreciate if some can propose a solution
Lawrence
Edited by: lcoelho on Oct 14, 2011 7:03 PM

Hi Lawrence,
SAP suggests to upload non-cumulatives NEVER from a DSO but from the PSA in parallel to DSO and Cube.
Andreas

Inventory cube - non cumulativekey fig values are showing -ve values

Hi Guru's,
For Improving the performance of inventory cube *0IC_C03
The following steps i did:
1) Created History cube by taking a copy of actual cube (0IC_C03).
2) Transferred all the four years of data (2007, 2008, 2009, 2010) to history cube(4 yr data) as a back up to do clustering and for cube remodelling.
3) After doing all these, loaded the current 3 years (2008, 2009, 2010)data back to the actual cube and kept one year data in the history cube (2007) (i.e maintained only recent 3yrs data in actual cube).
5) Created a multiprovider includes actual and history cubes and populated the existing report on top of the multiprovider.
6) After purging one year data from the actual cube, stock values in the reports are showing negative values
7) To clear that issue i loaded the 2007 year data back to the actual cube (now the cube has all years data as it was before) to avoid the negative stock value, but again stock values are showing negative values.
How to solve this issues in inventory cube..
how too eliminate the negative value in reports which was working prperly before data purging( removing the first year data from the actual cube)

Hi prayog.. 10q for answering... Yeah i went 2 the data targets. And the forumlae is already wrriten like this IF( Debit/Credit = 'H', Qty in OUn, ( 1- * Qty in OUn ) ) for Actual Consum. K.F and IF( Debit/Credit = 'H', Amt. in local curr., ( 1- * Amt. in local curr. ) ) for Amount.....
So i already said that from one of the infosource the data is flowing through ODS and then 2 CUBE. So i checked out the data in ODS with the movement type and posting date as per in the Report.. I selected the 'Debit/Credit' = H and Movement type and Posting date... But in ODS o/p the keyfig's are not displayed..... This is the problem...
Cheers,
Hemanth Aluri...

Inventory Cube Issue

Hi Experts,
We have created a copy of 0IC_C03 with more no of fields added to the copy cube CIC_C03. We had lot of data mismatch in the earlier stage & now after a long time this copy cube is working fine in production. We have not yet compressed the deltas in the cube.
Now, later there was a field to be added in the inventory cube which takes data from an ODS. For this we created one more copy cube as we didnot want to disturb the inventory cube in production, hence we created one Zcube which is the copy of CIC_C03 with an added field. In the update rules we have a routine which fills with data from the ODS. The CIC_C03 acts as datasource for this Zcube.
My question is:
1) I dont feel that after a month or so, we require the data in CIC_c03 as the same data comes in ZCube. So will deletion of data from CIC_C03 affect my data?
2) The intial data in CIC_C03 are compressed whereas the deltas are not yet compressed. Should the full upload to Zcube take after compression only?
3) Suppose we delete the data from CIC_C03 after 2 months after a full upload is taken till that point. After deletion, the deltas will be coming in CIC_C03, canl these everyday delta be transfeered to Zcube?
Waiting for reply.
Regards,
Vaishnavi.

Hi,
The note(637927) is saying that the KFs which represents the values of Stock-in-transit (issue, receipt, current) are deleted in the cube . But still the cube is containint the KF which represents the quntity of Stock-in-transit (issue, receipt, current) .
So the deleted KF are :
0VALTRANSST - Stock-in-transit value
0RECCCNSVAL - Stock-in-transit issue value
0RECTRFSTVA - Stock-in-transit receipt value
Available KF are:
0TRANSSTOCK - Stock in transit Qty
0RECTRANSST - Receipt quantity: stock in transit
0ISSTRANSST - Issue quantity: stock in transit
So to find out the value of Stock-in-transit , you will use the Stock in transit. The scenario has to be used in this calculation is same as explained in note:589024.
With rgds,
Anil Kumar Sharma .P

Inventory Cube - Historical Movement Data

Hi experts
In the Inventory Cube 0IC_C03 there seem to some problem with the Historical Movement Data. Now I want to execcute the Query by ignoring the Historical Data. My question is
1. How can I ignore the historical movent and execute a query on Inventory Cube.
2. Can i get the correct Closing balance.
Thanks in advance.
Dinesh Sharma

Hi,
For 0IC_C03, you can't execute the reports without proper Historical data. If you run reports without proper dataloads, you can't get good results. Because all keyfigures are Non-Cumulative Keyfigures, so you must habe proper data in 0IC_C03. It is not like a 0SD_C03 Cube, here you can restrict Month or day then run the reports, but in case of 0IC_C03, you must have perfect data.
See the following URLs.
Treatment of historical full loads with Inventory cube
Setting up material movement/inventory with limit locking time
Thanks
Reddy

Reuse of 0IC_C03 Inventory cube

Similar Messages

Maybe you are looking for