Reuse process order..

Hi Experts,
I have created process order for 8 KG and issued 8 kg raw materials to production.Out of 8kg raw materials 2 kg got scrapped due to some reason.So how can i post this material as scrap and issue 2 kg raw materials for the same process order....?
Regards,
Sanju M S

Sanju,
The question here would be, do you want to take the scrap value specific to that process order or not?
1. If you want to caputre the scrap cost within the order, then you need to simply make a manual - unplanned goods issue to the order for 2kg. This would capture the additional goods issue cost.
or
2. To capture that scrap seperately, you need to reverse 2kg from the already Issue order and then Issue this 2kg to scrap using 551 to a cost center. Once you have reversed 2kg fromm process order, you would be allowed to Issue fresh 2kg to
the order.
Regards,
Prasobh

Similar Messages

Report for open process orders

Dear SAP experts,
As the period of the process order from open to close is not short, will take 1 or 2 months in our business case, so we want to find a report which can get the information just like the output of KSPP(for planned orders) .
I tried to analysis the logic of program KSPP, and it seems the function modules based on the planned orders only.
Is there any way to get the similar report for open process orders?
Many Thanks,
Lisa Yao

Is there any clues?

Report for conformation cancelled process orders.

Hi frnds,
I need a report for orders which have got cancelled of confirmation.
plz suggest...
Robert.

Dear,
There is no standard report in SAP which shows Report for conformation cancelled.
But you can check in order it self in COR2 good movement details.
Or check document in MB03
Use CORS to reverse the phases.
After canceling if you want to view it again then use CORT (here there is one check box named 'Reversed' means that phase is reversed).
Or Please use user exit
EXIT_SAPLCORF_404 Process order conf.: Customer specific input checks 2
Regards,
R.Brahmankar

Error while creating a process order

Dear Guru's
While creating a process order ,i am facing an error.
"Unable to create batch. Storage location BPSS is invalid for material 112100050
Message no. 40116".
How to assign specific storage loaction to that particular material.I have assigned in material master "work scheduling tab",But it was throwing an error while doing process order.Pls help me to solve this problem.
Thanks in advance,
Rgds,
cherukuri

Hi Cherukuri
Are u using special procurement key "80"? It seems that storage location is not mentioned for the header material in the production plant.
Maintain this using T Code MMSC. It will solve ur issue
Rgds

Custom exit or badi for changing the user fields in operation of process order

Hi all
    I want to find a exit or badi to set default value to the user fields in operation of process order when COR1.
    I have tried exit 'PPCO0001', but this exit is call after commit work, so I can not change any thing
    I also tried to use badi 'workorder_update', 'before_update', but all parameters in this BADI are importing, can't be changed, I've tried to change it and then program dump.
    Do you have any solution for this question?
Thanks

Do a Implicit Enhancement at the PBO of this subscreen.

Error in creation of Process order

Dear Expert
while creating a process order i am getting 2 errors no valid task list for key date and lot size
No task list with in validity period of production version , how to resolve these error
Regards

Dear Usmfarhan,
Check your validity in your routing and BOM , and also check the lot sizes are matched or not in these two master data, in C223 check the production version you will get the error if it does not matches, check and revert back.
Regards,
Karad D D

Issue in Sales Order & Process Order interface

Hi,
Issue:
In case of Assemble to Order scenario, Process order is created automatically when SO is created.
Process order will have Sales order number under General data tab ( COR3)
When sales order is created with respect to Inquiry, Inquiry number is displayed in process order instead of Sales order number.
Also when process order is confirmed, stocks are posted to Inquiry number stock i.e in MMBE Inquiry number is displayed against stock ( sales order stock)
since stock are not posted to sales order stock, schedule line is not confirmed.
As a result sales order cannot be delivered.
Query
1) please let me know the customizing settings done for automatic creation of process order WRT sales order( Both SD and PP if possible)
2) Customizing setting which controls the sales order field in Process order. so that stocks are posted to sales order stocks and not Inquiry or Qutation stock even if they are present.

Where you checking these details.Are you seeing the print preview If yes then it seems the changes not captured into print preview.Check with your ABAPer why system is not getting right weights.

BOM Explosion for Multiple Process Orders

Hi,
I hope someone can assist me with the following: Is there a report I can run or transaction I can do to have BOM explosion for multiple Process Orders? I would like to input process orders for a week and see the BOM details per PO.
Thanks

Dear Sukendar,
1.For this requirement you have to go for a Z report and you can give the Functional Spec's to prepare
this report to your ABAP consultant.Prepare the input format,logic of the program and the output format.
In the logic part you can make use of this Functional Modules's CSAP_MAT_BOM_READ or
CSEP_MAT_BOM_READ or CS_BOM_EXPLOSION or CS_BOM_EXPL_MAT_V2 .
2.Using CEWB helps you to identify all the material that's having the BOM,but here the report does not
shows you the level by level by BOM for a FERT.
Check and revert back.
Regards
Mangalraj.S

OSSNOTES for releasing process orders with missing parts in background

Hi All,
The bapi 'BAPI_PROCORD_RELEASE' is not releasing the process orders
with missing parts in background.
Is there any OSSNotes for releasing these process orders in backgound through this bapi.
Pls help.
Thanks .

Hi Suri - Thanks for your response. I tried both with blank(individual and collective) and 2 (collective req. only) but I still get the same result. I found one other setting that can solve this issue and that is checking the activate full confirmation logic at the the MRP group level in OPPR. I will test more and let you know if that works but we dont use MRP groups here at our client and that is why I was little hesistant to set up collective availability check parameters at the MRP group level. But looks like this is the only option that we can use to get this resolved.
Thanks,
Bharath

Error for open process order when BOM alternative is not found

Dear colleagues,
When I open process order. BOM alternative is selected according to the production version. But when BOM alternative is not found system gives only information message and I can open process order, I want to prevent open process order when there is no BOM alternative according to the production version. Because the Bom can be deleted after creation production version.
Thanks for your helping,

Hi,
U need to use an enhancement at the creation of order to check the active status of the bom and restricting the order creation when BOM status is inactive.
see whether following enhancement is useful for your scenario:
PPCO0006 Enhancement & EXIT_SAPLCOZF_003
Please confirm.
Regards
Suri

Smartforms for SAP process orders.

Hi,
We want to use smart forms instead of SAP scripts for process order for various reasons.
COnfig does not allow using smart forms.
So we called the smart form in the print program of the sap script.
But this process is not using the configuration ( OPK8 or CB85). Its always picking the default printer from the user profile.
Did any one do this before? if yes what is the process followed.
we are using the function CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
to print the smart form.

Hello,
SAPScript use the structure ITCPO to know the printer to use and all the configuration.
You have to transform ITCPO to SMARTFORMS parameters to have the same behavior.
It will be something like that in your abap code :
SAPScript to Smartforms
PERFORM convert_itcpo_2_ssf
      USING print_opts
            print_co-screen
            sy-langu
      CHANGING ls_control_param
               ls_composer_param
Display Smartforms
    CALL FUNCTION lf_fm_name
      EXPORTING
        control_parameters = ls_control_param
        output_options     = ls_composer_param
        user_settings      = space
FORM convert_itcpo_2_ssf
    USING ps_itcpo TYPE itcpo
          p_dialogue TYPE c
          p_spras TYPE sy-langu
    CHANGING ps_control_parameters TYPE ssfctrlop
             ps_output_options     TYPE ssfcompop.
CLEAR : ps_control_parameters, ps_output_options.
ps_control_parameters-device = 'PRINTER'.
IF p_dialogue IS INITIAL.
    ps_control_parameters-no_dialog = 'X'.
ELSE.
    ps_control_parameters-no_dialog = ' '.
ENDIF.
ps_control_parameters-preview = ps_itcpo-tdpreview.
ps_control_parameters-getotf = ps_itcpo-tdgetotf.
ps_control_parameters-langu = p_spras.
ps_output_options-tdteleland = ps_itcpo-tdteleland.
ps_output_options-tdtelenum = ps_itcpo-tdtelenum.
ps_output_options-tdfaxuser = ps_itcpo-tdfaxuser.
ps_output_options-tdschedule = ps_itcpo-tdschedule.
ps_output_options-tdsenddate = ps_itcpo-tdsenddate.
ps_output_options-tdsendtime = ps_itcpo-tdsendtime.
ps_output_options-bcs_reqst = ps_itcpo-bcs_reqst.
ps_output_options-bcs_status = ps_itcpo-bcs_status.
ps_output_options-tdarmod = ps_itcpo-tdarmod.
ps_output_options-tdnoarmch = ps_itcpo-tdnoarmch.
ps_output_options-tdtitle = ps_itcpo-tdtitle.
ps_output_options-tdnoprev = ps_itcpo-tdnoprev.
ps_output_options-tdnoprint = ps_itcpo-tdnoprint.
ps_output_options-tdnoarch = ''.
ps_output_options-tdiexit = ps_itcpo-tdiexit.
ps_output_options-tddataset = ps_itcpo-tddataset.
IF ps_output_options-tddataset IS INITIAL.
    ps_output_options-tddataset = 'SMARTF'.
ENDIF.
ps_output_options-tdsuffix1 = ps_itcpo-tdsuffix1.
ps_output_options-tdsuffix2 = ps_itcpo-tdsuffix2.
ps_output_options-tdcovtitle = ps_itcpo-tdcovtitle.
ps_output_options-tddest = ps_itcpo-tddest.
ps_output_options-tdprinter = ps_itcpo-tdprinter.
ps_output_options-rqposname = ps_itcpo-rqposname.
ps_output_options-tdnewid = ps_itcpo-tdnewid.
ps_output_options-tdimmed = ps_itcpo-tdimmed.
ps_output_options-tddelete = ps_itcpo-tddelete.
ps_output_options-tdlifetime = ps_itcpo-tdlifetime.
ps_output_options-tdautority = ps_itcpo-tdautority.
ps_output_options-tdfinal = ps_itcpo-tdfinal.
ps_output_options-tdcover = ps_itcpo-tdcover.
ps_output_options-tdreceiver = ps_itcpo-tdreceiver.
ps_output_options-tddivision = ps_itcpo-tddivision.
ps_output_options-tdcopies = ps_itcpo-tdcopies.
ps_output_options-tdpageslct = ps_itcpo-tdpageslct.
ENDFORM.
Best Regards
Joë

Extractor for PM process orders

Hi Experts,
We are looking for a PM extractor for process orders, this is to get component information (material details), we found 2LIS_04_P_MATNR but it's limited to production orders only, also tried filling setup tables for this extractors but not fetching process orders at all.
http://help.sap.com/saphelp_nw70/helpdata/en/88/7fc73c0c52085be10000000a114084/frameset.htm

Is there any clues?

Uploading of Open Process orders

Hi,
I have a requirement in my project to upload the Open Process orders with the legacy number range. Please let me know how this is possible .
Regards
Sudhakar

Hello,
You can define a new "Process Order Type" with external number range specifically for Go-Live, to have open legacy orders into SAP. This will be used only during Cut-over i.e. initial open orders upload ONLY.
Whereas you can LSMW or Standard BAPI to populate process orders in SAP.
Hope this will help.
Regards,
Anup

Report on settlement profile/rule for the Process Orders ?

Is there any report which will display settlement profile for process order or settlement rule for process order.

Hi,
Did you try this one: KOSRLIST_OR - Settlement Rules?
Regards,
Eli

Open Process Orders take-over when going-live

Hello PP People
Does anyone have any experience/recommendation about the transition/take-over of open process orders from a legacy system to SAP when going live ?
These process orders are started in the legacy system and should arrive in a partially confirmed (hours/consumptions) status in the SAP system at go-live. How is this generally tackled from a CO point of view ?
Any hints on this could be helpfull
Thanks and best regards

Hi,
The method adopted depends on the business requirements. There are quite many options which can be adopted. So first thing i would say is get a clear business requirement what business expects from this migration.
Some of the options could be
1. Close all orders in the legacy system & create new orders in the SAP system & post back the confirmations, post goods movement as per the legacy system.
2. Create a material per order carrying the cost (WIP value) as per the legacy system, assign this component in the component list & post this mateiral to the order, thereby the WIP vlaue will be acrrued to the order.
3. Ask your FI-CO personnel to post the WIP value to the order from FI side.
There could be many more approaches, the choice depends purely on business needs. Hope the above gave you some guideline.
Regards,
Vivek

Reuse process order..

Similar Messages

Maybe you are looking for