Rev 1.2.1 disabling accessories?

This week I accepted the notice from Apple to update my 5G iPod software to the latest revision. Since that update, my AirPlay2 FM broadcaster (http://www.xtrememac.com/audio/wireless/airplay2.php) has not worked.
Normally, the AirPlay2 would power up when iPod playback would begin, but it now does nothing.
Anyone experienced similar problems with rev 1.2.1?
Is there a way to go back to older iPod software revisions?

Jeff wrote:
I have a pair of 400 MHz B&W G3s that shipped with the Rev. 1 motherboard, but my 450 MHz B&W does have the Rev. 2 motherboard. In terms of improvements, the Rev. 2 IDE controller chip merely corrected a programming error, so it can't be considered technology-forward. The older beige G3s have IDE controllers that reliably support drives larger than 40 GBs (up to 128 GBs), and drive RPM isn't a problem. As for the B&W G3s, neither the first nor the revised IDE controller chip supports 48-bit Logical Block Addressing, needed for large drive (128 GBs+ ->)support.
However, if you've got the revised controller on your G3, you can use the Speedtools version2 utility from Intech or their tool (sold separately, unbundled) called Hi-Cap to extend the addressing of a drive beyond 128GB.
I tried it on my old G3 B/W 400MHz CPU that I'm setting up as a backup 'server' on a pair of 500GB ATA drives. Worked great on OS X 10.4.11. Highly recommended! Installation was easy but you will need separate partitions and your OS X installed in the <128GB partition. Their instructions are abundantly clear and the web site details show that.
<a class="jive-link-external-small" href="http://">http://speedtools.com/

Similar Messages

Connection Locks UP

When going to certain websites and downloading a file the connection freezes, Turning the router off and then on again restores the connection. For instance, If I go to www.divx.com and try to download a codec, the yellow warning bar at the top the screen asks If I want to download. I click to download and the connection freezes. The router has to be reset to get going again. I have a linksys hub between the computer and and the router. I tried going direct eliminating the router and the connection will still locks up. It's annoying and can happen frequently. The problem looks similar to losing DNS. I've checked everything I can think of - welcome any ideas - thanks
Router: Actiontec M424-er Rev C
Wireless is disabled

I am not going to be able to help you, but fyi I just went to that site and downloaded a 19.7 MB file with no trouble. My router continues to work just fine after the download. I have the ActionTec Rev. D. So that site can work on the ActionTec I guess.
Have you done a bunch of customiztion in the ActionTec that might be causing the problem? Like rules, etc., just grasping at straws. Just thought of a few more questions:
1) When the router freezes, are you talking about the internet connection freezing, or any connection from PC to router? Can you get into the router from any PC to view settings, etc, at that point?
2) Are you connected to FiOS using DHCP or PPPoE (don't have any idea if this would have any effect, but???? I am PPPoE)?
3) What MTU are you using? Have you tried setting it higher or lower?
Again, just grasping, no real idea, but maybe with more info someone will recognize something. Wish I could help.
Justin
Verizon FiOS TV, Internet, and phone
IMG 1.5.0
Keller, TX

[SOLVED] Mic does not work on Intel ICH8 (rev 3) sound card

Hi, folks.
I cannot get my sound card to record anything, using a built-in microphone. Audio output works just fine, though. I hope someone can help me, I have been banging my head against the wall for some time over this issue...
My laptop is Toshiba Satellite A200-1J0 (PSAE6E-04R036G3). alsamixer settings are fine, I tried supplementing additional options to /etc/modprobe.d/modprobe.conf, but no luck, tried some of the combinations (model=<> position_fix=<>).
When recording sound with gnome-sound-recorder, with Capture set as input, nothing is heard. Skype can't record anything, either. I can't even get the crackling or hissing sound like some users do.
Should I try to get the latest ALSA?
Debug details start from now on:
/etc/modprobe.d/modprobe.conf
options snd-hda-intel index=0 model=3stack position_fix=1
lsmod | grep snd
snd_seq_dummy 1099 0
snd_seq_oss 25304 0
snd_hda_codec_atihdmi 2051 1
snd_seq_midi_event 4452 1 snd_seq_oss
snd_hda_codec_realtek 179240 1
snd_seq 42628 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_hda_intel 18697 1
snd_seq_device 4313 3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_hda_codec 56728 3 snd_hda_codec_atihdmi,snd_hda_codec_realtek,snd_hda_intel
snd_pcm_oss 33693 0
snd_mixer_oss 14810 1 snd_pcm_oss
snd_hwdep 5102 1 snd_hda_codec
snd_pcm 57479 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_timer 16117 2 snd_seq,snd_pcm
snd 43847 13 snd_seq_oss,snd_hda_codec_realtek,snd_seq,snd_hda_intel,snd_seq_device,snd_hda_codec,snd_pcm_oss,snd_mixer_oss,snd_hwdep,snd_pcm,snd_timer
soundcore 5007 1 snd
snd_page_alloc 5809 2 snd_hda_intel,snd_pcm
lspci (parts of interest)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
Subsystem: Toshiba America Info Systems Device ff00
Flags: bus master, fast devsel, latency 0, IRQ 22
Memory at fc400000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
01:00.0 VGA compatible controller: ATI Technologies Inc M76 [Radeon Mobility HD 2600 Series] (prog-if 00 [VGA controller])
Subsystem: Toshiba America Info Systems Device ff00
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at d0000000 (32-bit, prefetchable) [size=256M]
I/O ports at 2000 [size=256]
Memory at fc000000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at fc020000 [disabled] [size=128K]
Capabilities: <access denied>
01:00.1 Audio device: ATI Technologies Inc RV630/M76 audio device [Radeon HD 2600 Series]
Subsystem: ATI Technologies Inc RV630/M76 audio device [Radeon HD 2600 Series]
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at fc010000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
alsa-info.sh
upload=true&script=true&cardinfo=
!!ALSA Information Script v 0.4.58
!!Script ran on: Sat Jan 23 20:27:13 UTC 2010
!!Linux Distribution
Arch Linux \r (\n) (\l) DISTRIB_ID=arch
!!DMI Information
Manufacturer: TOSHIBA
Product Name: Satellite A200
!!Kernel Information
Kernel release: 2.6.32-ARCH
Operating System: GNU/Linux
Architecture: i686
Processor: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz
SMP Enabled: Yes
!!ALSA Version
Driver version: 1.0.21
Library version: 1.0.22
Utilities version: 1.0.22
!!Loaded ALSA modules
snd_hda_intel
snd_hda_intel
!!Sound Servers on this system
ESound Daemon:
Installed - Yes (/usr/bin/esd)
Running - No
Jack:
Installed - Yes (/usr/bin/jackd)
Running - No
!!Soundcards recognised by ALSA
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xfc400000 irq 22
1 [HDMI ]: HDA-Intel - HDA ATI HDMI
HDA ATI HDMI at 0xfc010000 irq 17
!!PCI Soundcards installed in the system
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
01:00.1 Audio device: ATI Technologies Inc RV630/M76 audio device [Radeon HD 2600 Series]
0c:04.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)
!!Advanced information - PCI Vendor/Device/Susbsystem ID's
00:1b.0 0403: 8086:284b (rev 03)
Subsystem: 1179:ff00
01:00.1 0403: 1002:aa08
Subsystem: 1002:aa08
!!Modprobe options (Sound related)
snd-hda-intel: index=0 model=3stack position_fix=1
!!Loaded sound module options
!!Module: snd_hda_intel
bdl_pos_adj : 1,32,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
enable_msi : 0
id : <NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>
index : 0,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
model : 3stack,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>
patch : <NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>
position_fix : 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
power_save : 1
power_save_controller : Y
probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
probe_only : N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N
single_cmd : N
!!Module: snd_hda_intel
bdl_pos_adj : 1,32,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
enable_msi : 0
id : <NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>
index : 0,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
model : 3stack,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>
patch : <NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>
position_fix : 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
power_save : 1
power_save_controller : Y
probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
probe_only : N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N
single_cmd : N
!!HDA-Intel Codec information
--startcollapse--
Codec: Realtek ALC268
Address: 0
Function Id: 0x1
Vendor Id: 0x10ec0268
Subsystem Id: 0x1179ff02
Revision Id: 0x100003
No Modem Function Group found
Default PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=4, o=0, i=0, unsolicited=1, wake=0
IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Node 0x02 [Audio Output] wcaps 0x1d: Stereo Amp-Out
Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
Amp-Out vals: [0x40 0x40]
Converter: stream=0, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Node 0x03 [Audio Output] wcaps 0x1d: Stereo Amp-Out
Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
Amp-Out vals: [0x35 0x35]
Converter: stream=0, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Node 0x04 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x05 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0x1e]: 16 20 24 32
formats [0x1]: PCM
Node 0x07 [Audio Input] wcaps 0x100111: Stereo
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x160]: 44100 48000 96000
bits [0x6]: 16 20
formats [0x1]: PCM
Connection: 1
0x24
Node 0x08 [Audio Input] wcaps 0x100111: Stereo
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x160]: 44100 48000 96000
bits [0x6]: 16 20
formats [0x1]: PCM
Connection: 1
0x23
Node 0x09 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0a [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0b [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0c [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0d [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0e [Audio Mixer] wcaps 0x20010a: Mono Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00]
Connection: 1
0x02
Node 0x0f [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00]
Connection: 2
0x02 0x1d
Node 0x10 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00] [0x80 0x80]
Connection: 3
0x03 0x1d 0x02
Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x12 [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x00000020: IN
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Node 0x13 [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x00000020: IN
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Node 0x14 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x0001003c: IN OUT HP EAPD Detect
EAPD 0x0:
Pin Default 0x99130110: [Fixed] Speaker at Int ATAPI
Conn = ATAPI, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 1
0x0f
Node 0x15 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x0001003c: IN OUT HP EAPD Detect
EAPD 0x0:
Pin Default 0x0221101f: [Jack] HP Out at Ext Front
Conn = 1/8, Color = Black
DefAssociation = 0x1, Sequence = 0xf
Pin-ctls: 0xc0: OUT HP
Unsolicited: tag=00, enabled=0
Connection: 1
0x10
Node 0x16 [Pin Complex] wcaps 0x40010c: Mono Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80]
Pincap 0x00000010: OUT
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Connection: 1
0x0e
Node 0x17 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x18 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x02, stepsize=0x4f, mute=0
Amp-In vals: [0x02 0x02]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x00003734: IN OUT Detect
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x02a11830: [Jack] Mic at Ext Front
Conn = 1/8, Color = Black
DefAssociation = 0x3, Sequence = 0x0
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=00, enabled=0
Connection: 1
0x02
Node 0x19 [Pin Complex] wcaps 0x40008b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x02, stepsize=0x4f, mute=0
Amp-In vals: [0x02 0x02]
Pincap 0x00003724: IN Detect
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x99a3093e: [Fixed] Mic at Int ATAPI
Conn = ATAPI, Color = Unknown
DefAssociation = 0x3, Sequence = 0xe
Misc = NO_PRESENCE
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=00, enabled=0
Node 0x1a [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x02, stepsize=0x4f, mute=0
Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x00003734: IN OUT Detect
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN VREF_HIZ
Unsolicited: tag=00, enabled=0
Connection: 1
0x02
Node 0x1b [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x1c [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x00000020: IN
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Node 0x1d [Pin Complex] wcaps 0x400000: Mono
Pincap 0x00000020: IN
Pin Default 0x4016852d: [N/A] Speaker at Ext N/A
Conn = Digital, Color = Purple
DefAssociation = 0x2, Sequence = 0xd
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Node 0x1e [Pin Complex] wcaps 0x400380: Mono Digital
Pincap 0x00000010: OUT
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 1
0x06
Node 0x1f [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono
Processing caps: benign=0, ncoeff=10
Processing Coefficient: 0x03
Coefficient Index: 0x01
Node 0x21 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x22 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x23 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x1d 0x1d]
Connection: 7
0x18* 0x19 0x1a 0x1c 0x14 0x15 0x12
Node 0x24 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x00 0x00]
Connection: 7
0x18* 0x19 0x1a 0x1c 0x14 0x15 0x13
Codec: LSI ID 1040
Address: 1
Function Id: 0x2
Vendor Id: 0x11c11040
Subsystem Id: 0x11790001
Revision Id: 0x100200
Modem Function Group: 0x1
Codec: ATI R6xx HDMI
Address: 0
Function Id: 0x1
Vendor Id: 0x1002aa01
Subsystem Id: 0x00aa0100
Revision Id: 0x100000
No Modem Function Group found
Default PCM:
rates [0x40]: 48000
bits [0x2]: 16
formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
Node 0x02 [Audio Output] wcaps 0x201: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
Node 0x03 [Pin Complex] wcaps 0x400381: Stereo Digital
Pincap 0x00000094: OUT Detect HDMI
Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 1
0x02
--endcollapse--
!!ALSA Device nodes
crw-rw----+ 1 root audio 116, 9 Jan 23 19:11 /dev/snd/controlC0
crw-rw----+ 1 root audio 116, 12 Jan 23 19:11 /dev/snd/controlC1
crw-rw----+ 1 root audio 116, 8 Jan 23 19:11 /dev/snd/hwC0D0
crw-rw----+ 1 root audio 116, 7 Jan 23 19:11 /dev/snd/hwC0D1
crw-rw----+ 1 root audio 116, 11 Jan 23 19:11 /dev/snd/hwC1D0
crw-rw----+ 1 root audio 116, 6 Jan 23 21:04 /dev/snd/pcmC0D0c
crw-rw----+ 1 root audio 116, 5 Jan 23 21:04 /dev/snd/pcmC0D0p
crw-rw----+ 1 root audio 116, 4 Jan 23 19:11 /dev/snd/pcmC0D1p
crw-rw----+ 1 root audio 116, 10 Jan 23 19:11 /dev/snd/pcmC1D3p
crw-rw----+ 1 root audio 116, 3 Jan 23 19:11 /dev/snd/seq
crw-rw----+ 1 root audio 116, 2 Jan 23 19:11 /dev/snd/timer
/dev/snd/by-path:
total 0
drwxr-xr-x 2 root root 80 Jan 23 19:11 .
drwxr-xr-x 3 root root 280 Jan 23 19:11 ..
lrwxrwxrwx 1 root root 12 Jan 23 19:11 pci-0000:00:1b.0 -> ../controlC0
lrwxrwxrwx 1 root root 12 Jan 23 19:11 pci-0000:01:00.1 -> ../controlC1
!!Aplay/Arecord output
APLAY
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC268 Analog [ALC268 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: ALC268 Digital [ALC268 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 3: ATI HDMI [ATI HDMI]
Subdevices: 1/1
Subdevice #0: subdevice #0
ARECORD
**** List of CAPTURE Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC268 Analog [ALC268 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
!!Amixer output
!!-------Mixer controls for card 0 [Intel]
Card hw:0 'Intel'/'HDA Intel at 0xfc400000 irq 22'
Mixer name : 'Realtek ALC268'
Components : 'HDA:10ec0268,1179ff02,00100003 HDA:11c11040,11790001,00100200'
Controls : 21
Simple ctrls : 13
Simple mixer control 'Master',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum
Playback channels: Mono
Limits: Playback 0 - 64
Mono: Playback 64 [100%] [0.00dB] [on]
Simple mixer control 'Headphone',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 64
Mono:
Front Left: Playback 53 [83%] [-11.00dB] [on]
Front Right: Playback 53 [83%] [-11.00dB] [on]
Simple mixer control 'PCM',0
Capabilities: pvolume penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 255
Mono:
Front Left: Playback 255 [100%] [0.00dB]
Front Right: Playback 255 [100%] [0.00dB]
Simple mixer control 'Front',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 64
Mono:
Front Left: Playback 64 [100%] [0.00dB] [on]
Front Right: Playback 64 [100%] [0.00dB] [on]
Simple mixer control 'Front Mic Boost',0
Capabilities: volume penum
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 2
Front Left: 2 [100%]
Front Right: 2 [100%]
Simple mixer control 'Line In Boost',0
Capabilities: volume penum
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 2
Front Left: 0 [0%]
Front Right: 0 [0%]
Simple mixer control 'Mic Boost',0
Capabilities: volume penum
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 2
Front Left: 2 [100%]
Front Right: 2 [100%]
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'IEC958 Default PCM',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'Beep',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 12
Mono:
Front Left: Playback 0 [0%] [-24.00dB] [on]
Front Right: Playback 0 [0%] [-24.00dB] [on]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 31
Front Left: Capture 29 [94%] [27.00dB] [on]
Front Right: Capture 29 [94%] [27.00dB] [on]
Simple mixer control 'Digital',0
Capabilities: cvolume penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 120
Front Left: Capture 0 [0%] [-30.00dB]
Front Right: Capture 0 [0%] [-30.00dB]
Simple mixer control 'Input Source',0
Capabilities: cenum
Items: 'Mic' 'Front Mic' 'Line' 'CD'
Item0: 'Mic'
!!-------Mixer controls for card 1 [HDMI]
Card hw:1 'HDMI'/'HDA ATI HDMI at 0xfc010000 irq 17'
Mixer name : 'ATI R6xx HDMI'
Components : 'HDA:1002aa01,00aa0100,00100000'
Controls : 4
Simple ctrls : 1
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [off]
!!Alsactl output
--startcollapse--
state.Intel {
control.1 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 64'
comment.dbmin -6400
comment.dbmax 0
iface MIXER
name 'Front Playback Volume'
value.0 64
value.1 64
control.2 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Front Playback Switch'
value.0 true
value.1 true
control.3 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 64'
comment.dbmin -6400
comment.dbmax 0
iface MIXER
name 'Headphone Playback Volume'
value.0 53
value.1 53
control.4 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Headphone Playback Switch'
value.0 true
value.1 true
control.5 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 2'
comment.dbmin 0
comment.dbmax 4000
iface MIXER
name 'Mic Boost'
value.0 2
value.1 2
control.6 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 2'
comment.dbmin 0
comment.dbmax 4000
iface MIXER
name 'Front Mic Boost'
value.0 2
value.1 2
control.7 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 2'
comment.dbmin 0
comment.dbmax 4000
iface MIXER
name 'Line In Boost'
value.0 0
value.1 0
control.8 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 31'
comment.dbmin -1650
comment.dbmax 3000
iface MIXER
name 'Capture Volume'
value.0 29
value.1 29
control.9 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Capture Switch'
value.0 true
value.1 true
control.10 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 Mic
comment.item.1 'Front Mic'
comment.item.2 Line
comment.item.3 CD
iface MIXER
name 'Input Source'
value Mic
control.11 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 12'
comment.dbmin -2400
comment.dbmax 0
iface MIXER
name 'Beep Playback Volume'
value.0 0
value.1 0
control.12 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Beep Playback Switch'
value.0 true
value.1 true
control.13 {
comment.access read
comment.type IEC958
comment.count 1
iface MIXER
name 'IEC958 Playback Con Mask'
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
control.14 {
comment.access read
comment.type IEC958
comment.count 1
iface MIXER
name 'IEC958 Playback Pro Mask'
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
control.15 {
comment.access 'read write'
comment.type IEC958
comment.count 1
iface MIXER
name 'IEC958 Playback Default'
value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
control.16 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'IEC958 Playback Switch'
value false
control.17 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'IEC958 Default PCM Playback Switch'
value true
control.18 {
comment.access 'read write'
comment.type INTEGER
comment.count 1
comment.range '0 - 64'
comment.dbmin -6400
comment.dbmax 0
iface MIXER
name 'Master Playback Volume'
value 64
control.19 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Master Playback Switch'
value true
control.20 {
comment.access 'read write user'
comment.type INTEGER
comment.count 2
comment.range '0 - 255'
comment.tlv '0000000100000008ffffec1400000014'
comment.dbmin -5100
comment.dbmax 0
iface MIXER
name 'PCM Playback Volume'
value.0 255
value.1 255
control.21 {
comment.access 'read write user'
comment.type INTEGER
comment.count 2
comment.range '0 - 120'
comment.tlv '0000000100000008fffff44800000032'
comment.dbmin -3000
comment.dbmax 3000
iface MIXER
name 'Digital Capture Volume'
value.0 0
value.1 0
state.HDMI {
control.1 {
comment.access read
comment.type IEC958
comment.count 1
iface MIXER
name 'IEC958 Playback Con Mask'
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
control.2 {
comment.access read
comment.type IEC958
comment.count 1
iface MIXER
name 'IEC958 Playback Pro Mask'
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
control.3 {
comment.access 'read write'
comment.type IEC958
comment.count 1
iface MIXER
name 'IEC958 Playback Default'
value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
control.4 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'IEC958 Playback Switch'
value false
--endcollapse--
!!All Loaded Modules
Module
usbhid
hidp
hid
fuse
radeon
ttm
drm_kms_helper
drm
i2c_algo_bit
rfcomm
sco
bridge
stp
llc
bnep
l2cap
crc16
coretemp
ipv6
snd_seq_dummy
snd_seq_oss
btusb
joydev
snd_hda_codec_atihdmi
fan
snd_seq_midi_event
bluetooth
snd_hda_codec_realtek
arc4
ecb
snd_seq
snd_hda_intel
iwlagn
snd_seq_device
snd_hda_codec
sdhci_pci
iwlcore
snd_pcm_oss
uvcvideo
omnibook
videodev
snd_mixer_oss
snd_hwdep
pcmcia
tifm_sd
sdhci
snd_pcm
v4l1_compat
snd_timer
psmouse
mac80211
mmc_core
yenta_socket
vboxdrv
snd
cpufreq_powersave
i2c_i801
uhci_hcd
r8169
ehci_hcd
iTCO_wdt
intel_agp
tifm_7xx1
video
rsrc_nonstatic
soundcore
firewire_ohci
agpgart
mii
i2c_core
pcspkr
snd_page_alloc
pcmcia_core
iTCO_vendor_support
led_class
output
usbcore
tifm_core
serio_raw
cfg80211
evdev
cpufreq_conservative
battery
ac
firewire_core
rfkill
crc_itu_t
thermal
button
cpufreq_ondemand
sg
acpi_cpufreq
freq_table
processor
rtc_cmos
rtc_core
rtc_lib
ext3
jbd
mbcache
sr_mod
cdrom
ata_generic
sd_mod
ata_piix
pata_acpi
ahci
libata
scsi_mod
!!Sysfs Files
/sys/class/sound/hwC0D0/init_pin_configs:
0x12 0x411111f0
0x13 0x411111f0
0x14 0x99130110
0x15 0x0221101f
0x16 0x411111f0
0x18 0x02a11830
0x19 0x99a3093e
0x1a 0x411111f0
0x1c 0x411111f0
0x1d 0x4016852d
0x1e 0x411111f0
/sys/class/sound/hwC0D0/driver_pin_configs:
/sys/class/sound/hwC0D0/user_pin_configs:
/sys/class/sound/hwC0D0/init_verbs:
/sys/class/sound/hwC0D1/init_pin_configs:
/sys/class/sound/hwC0D1/driver_pin_configs:
/sys/class/sound/hwC0D1/user_pin_configs:
/sys/class/sound/hwC0D1/init_verbs:
/sys/class/sound/hwC1D0/init_pin_configs:
0x03 0x18560010
/sys/class/sound/hwC1D0/driver_pin_configs:
/sys/class/sound/hwC1D0/user_pin_configs:
/sys/class/sound/hwC1D0/init_verbs:
!!ALSA/HDA dmesg
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: setting latency timer to 64
iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
phy0: Selected rate control algorithm 'iwl-agn-rs'
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
HDA Intel 0000:01:00.1: setting latency timer to 64
Synaptics Touchpad, model: 1, fw: 6.5, id: 0x82e0b1, caps: 0xb04711/0xe0440d
Bluetooth: L2CAP socket layer initialized
hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x018b0000
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
Bridge firewalling registered
Last edited by teMplaryum (2010-01-26 10:15:18)

Hi there!
I had the very same problem with the same soundcard and found this thread.
The problem got solved for me by adding the same line as you have to /etc/modprobe.d/modprobe.conf.
However, I also had to create /etc/modprobe.d/sound.conf and add:
alias snd-card-0 snd-hda-intel
alias sound-slot-0 snd-hda-intel
options snd-hda-intel model=toshiba power_save=0
Notice the difference on the "model=toshiba" part.
However, my laptop is not a Toshiba, but a Compal IFL90.
I remember that in Ubuntu I needed(a long time ago) to add a line to /etc/alsa.conf with model=toshiba. I figured it might be worth a try, and well, it did.
I hope this can help someone else.
As for the OP: "You have my thanks!"

Memory question...ocz El Rev 2

Just put my system together. It has the 1.1 bios. I put in 2 512MB sticks of OCZ EL Rev. 2 Platinum. Sticks are in the 2 slots closest to the CPU. I've read that there may be some problems with 2 sticks of double sided ram. My machine will post if I use only 1 stick in slot 1. or it will post and read the full 1 GB if I put the sticks in Slots 1 & 3.
When it does post, it comes up as DDR333 Single channel, 64-bit, mem clock is 166Mhz
Tcl:2, Trcd:2, Tras:5 Trp:5 (2t Timing)
DDR Dimm at rows 0 1 4 5
How can I get the machine to recognize both sticks of dual-sided memory?
Maybe a stupid question, but....if the BIOS version has something to do with this problem, is there some way to update it before I install windows XP?
I guess I can use 1 stick and install everything, and then add the other after I flash the BIOS (if this is a BIOS related problem).

Quote
Originally posted by andygold
Well, I updated the BIOS to version 1.3 (up from 1.1), and the machine posts and seems to run fine now....althought the first boot after installing the second stick of ram, the machine came up into Windows, and when I tried to access a website, I got a BSOD, which flashed onto the screen for a split second, dissappeared, and the machine powered off(dropped dead). It's been running for a few hours since the reboot, with no problems.
The rams manually set at 2,2,2,5 {2T}, (or maybe it 2,2,5,2 {2T}...depends on how you read it), with the memory voltage set at 2.75(BIOS is flashing red as though it doesn't like this, but that's the proper voltage according to OCZ. I've got FSB at 200, AGP freq. at 67.
My other settings, although I don't know if they're good or not are:
High Performance mode = manual
aggressive timing = disabled
dynamic overclocking = disabled
spread spectrum = disabled
HT freq. = 5x .....is this the multiplier x fsb to =1000?
cool 'n' quiet = disabled
adjust CPU ratio = "startup"...not sure if this good
adjust CPU VID = 1.500v ...not too sure about this either
CPU voltage = "by CPU vid" not sure on this either
AGP voltage = 1.50v ....not sure once again
ACTUALLY I"M NOT SURE OF ANY OF THE ABOVE, BUT I GLEENED MOST OF IT FROM THIS FORUM
For info purposes, I have the 2 sticks in DIMM slots 3 and 4, with slots 1 and 2 empty. The Zalman fan sits on top of slot 1, and although when the DIMM is in this slot it does not hit the CPU's heatsink, I didn't want to keep bending the fins, during the removal and replacement. I don't believe there's any problem with this memory placement, acording to the mobo manual, but if anyone disagrees, please post.
So, to sum up, it appears the updated BIOS seems to have solved the problem!
Any thoughts on the rest of the settings would be greatly appreciated!!!!
"Bending the fins"??? Do you mean it is NOT possible to use the memories in slots 1, 2 with this Zalman without bending the fins? Oh god... I just got one today...
MSI and everybody recommend the memory at slots 1,2.

Radeon driver on HD7770: Direct rendering disabled

Hi, i have strange issue here. DRI is just not working. I am trying to fix this shit already a week, or maybe even more. Help someone. pls.
Installed pkgs
linux-firmware
amd-ucode
xf86-video-ati
ati-dri
lib32-ati-dri
glu
libegl
libgbm
libgl
libglapi
libgles
mesa
lib32-mesa
mesa-demos
Kms currently in early start(in late start no changes). If kms disabled from kernel by grub cmd line or radeon.conf in modprobe.d, same story.
dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.6.8-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.2 (GCC) ) #1 SMP PREEMPT Mon Nov 26 22:10:40 CET 2012
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=6820a5fc-5e11-4854-929c-62edccd80ff8 resume=/dev/sda6 ro quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e6000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cffaffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cffb0000-0x00000000cffbdfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cffbe000-0x00000000cffdffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cffe0000-0x00000000cfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff700000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: BIOSTAR Group TA770XE3/TA770XE3, BIOS 080014 09/01/2010
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x230000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000230000000 aka 8960M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xcffb0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0xcffaffff]
[ 0.000000] [mem 0x00000000-0xbfffffff] page 1G
[ 0.000000] [mem 0xc0000000-0xcfdfffff] page 2M
[ 0.000000] [mem 0xcfe00000-0xcffaffff] page 4k
[ 0.000000] kernel direct mapping tables up to 0xcffaffff @ [mem 0x1fffd000-0x1fffffff]
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x22fffffff]
[ 0.000000] [mem 0x100000000-0x1ffffffff] page 1G
[ 0.000000] [mem 0x200000000-0x22fffffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0x22fffffff @ [mem 0xcffae000-0xcffaffff]
[ 0.000000] RAMDISK: [mem 0x378dc000-0x37c65fff]
[ 0.000000] ACPI: RSDP 00000000000fb360 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000cffb0100 00054 (v01 090110 XSDT1718 20100901 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000cffb0290 000F4 (v03 090110 FACP1718 20100901 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000cffb0450 0952E (v01 78XBD 78XBD901 00000001 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000cffbe000 00040
[ 0.000000] ACPI: APIC 00000000cffb0390 0007C (v01 090110 APIC1718 20100901 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000cffb0410 0003C (v01 090110 OEMMCFG 20100901 MSFT 00000097)
[ 0.000000] ACPI: SRAT 00000000cffb9980 000D8 (v03 AMD FAM_F_10 00000002 AMD 00000001)
[ 0.000000] ACPI: HPET 00000000cffb9a60 00038 (v01 090110 OEMHPET 20100901 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000cffb9aa0 00672 (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xcfffffff]
[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x22fffffff]
[ 0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xcfffffff] -> [mem 0x00000000-0xcfffffff]
[ 0.000000] NUMA: Node 0 [mem 0x00000000-0xcfffffff] + [mem 0x100000000-0x22fffffff] -> [mem 0x00000000-0x22fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x22fffffff]
[ 0.000000] NODE_DATA [mem 0x22fffc000-0x22fffffff]
[ 0.000000] [ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880227600000-ffff88022f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x22fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xcffaffff]
[ 0.000000] node 0: [mem 0x100000000-0x22fffffff]
[ 0.000000] On node 0 totalpages: 2096959
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3913 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 831472 pages, LIFO batch:31
[ 0.000000] Normal zone: 19456 pages used for memmap
[ 0.000000] Normal zone: 1225728 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 3, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] smpboot: Allowing 6 CPUs, 3 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000
[ 0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cffb0000 - 00000000cffbe000
[ 0.000000] PM: Registered nosave memory: 00000000cffbe000 - 00000000cffe0000
[ 0.000000] PM: Registered nosave memory: 00000000cffe0000 - 00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000ff700000
[ 0.000000] PM: Registered nosave memory: 00000000ff700000 - 0000000100000000
[ 0.000000] e820: [mem 0xd0000000-0xff6fffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:6 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88022fc00000 s84608 r8192 d21888 u262144
[ 0.000000] pcpu-alloc: s84608 r8192 d21888 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - -
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2061113
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=6820a5fc-5e11-4854-929c-62edccd80ff8 resume=/dev/sda6 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ ffda000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ c4000000
[ 0.000000] PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000
[ 0.000000] Memory: 8109632k/9175040k available (4727k kernel code, 787204k absent, 278204k reserved, 4143k data, 772k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6.
[ 0.000000] NR_IRQS:4352 nr_irqs:728 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.003333] tsc: Detected 3300.452 MHz processor
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6603.94 BogoMIPS (lpj=11001506)
[ 0.000006] pid_max: default: 32768 minimum: 301
[ 0.000028] Security Framework initialized
[ 0.000031] AppArmor: AppArmor disabled by boot time parameter
[ 0.000423] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.003268] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.004597] Mount-cache hash table entries: 256
[ 0.004774] Initializing cgroup subsys cpuacct
[ 0.004776] Initializing cgroup subsys memory
[ 0.004784] Initializing cgroup subsys devices
[ 0.004785] Initializing cgroup subsys freezer
[ 0.004786] Initializing cgroup subsys net_cls
[ 0.004787] Initializing cgroup subsys blkio
[ 0.004806] tseg: 0000000000
[ 0.004817] CPU: Physical Processor ID: 0
[ 0.004817] CPU: Processor Core ID: 0
[ 0.004819] mce: CPU supports 6 MCE banks
[ 0.004823] LVT offset 0 assigned for vector 0xf9
[ 0.004827] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0
tlb_flushall_shift is 0xffffffff
[ 0.005367] ACPI: Core revision 20120711
[ 0.013974] ftrace: allocating 18348 entries in 72 pages
[ 0.020364] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.053342] smpboot: CPU0: AMD Athlon(tm) II X3 455 Processor stepping 03
[ 0.159231] Performance Events: AMD PMU driver.
[ 0.159233] ... version: 0
[ 0.159234] ... bit width: 48
[ 0.159235] ... generic registers: 4
[ 0.159236] ... value mask: 0000ffffffffffff
[ 0.159236] ... max period: 00007fffffffffff
[ 0.159237] ... fixed-purpose events: 0
[ 0.159238] ... event mask: 000000000000000f
[ 0.185941] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.199228] smpboot: Booting Node 0, Processors #1 #2
[ 0.235728] Brought up 3 CPUs
[ 0.235731] smpboot: Total of 3 processors activated (19810.82 BogoMIPS)
[ 0.236361] devtmpfs: initialized
[ 0.237998] PM: Registering ACPI NVS region [mem 0xcffbe000-0xcffdffff] (139264 bytes)
[ 0.238734] NET: Registered protocol family 16
[ 0.238826] node 0 link 0: io port [1000, ffffff]
[ 0.238828] TOM: 00000000d0000000 aka 3328M
[ 0.238830] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[ 0.238831] node 0 link 0: mmio [e0000000, efffffff] ==> none
[ 0.238833] node 0 link 0: mmio [f0000000, ffffffff]
[ 0.238835] node 0 link 0: mmio [a0000, bffff]
[ 0.238836] node 0 link 0: mmio [d0000000, dfffffff]
[ 0.238837] TOM2: 0000000230000000 aka 8960M
[ 0.238839] bus: [bus 00-07] on node 0 link 0
[ 0.238840] bus: 00 [io 0x0000-0xffff]
[ 0.238840] bus: 00 [mem 0xf0000000-0xffffffff]
[ 0.238841] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.238842] bus: 00 [mem 0xd0000000-0xdfffffff]
[ 0.238843] bus: 00 [mem 0x230000000-0xfcffffffff]
[ 0.238886] ACPI: bus type pci registered
[ 0.238934] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.238935] PCI: not using MMCONFIG
[ 0.238936] PCI: Using configuration type 1 for base access
[ 0.238937] PCI: Using configuration type 1 for extended access
[ 0.239117] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.239118] mtrr: probably your BIOS does not setup all CPUs.
[ 0.239118] mtrr: corrected configuration.
[ 0.239456] bio: create slab <bio-0> at 0
[ 0.239588] ACPI: Added _OSI(Module Device)
[ 0.239591] ACPI: Added _OSI(Processor Device)
[ 0.239592] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.239592] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.240094] ACPI: EC: Look up EC in DSDT
[ 0.240947] ACPI: Executed 5 blocks of module-level executable AML code
[ 0.243065] ACPI: Interpreter enabled
[ 0.243070] ACPI: (supports S0 S1 S4 S5)
[ 0.243083] ACPI: Using IOAPIC for interrupt routing
[ 0.243100] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.243680] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.263207] ACPI: No dock devices found.
[ 0.263212] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.263269] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.263374] PCI host bridge to bus 0000:00
[ 0.263377] pci_bus 0000:00: busn_res: [bus 00-ff] is inserted under domain [bus 00-ff]
[ 0.263378] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.263380] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.263381] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.263383] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.263384] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[ 0.263386] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xdfffffff]
[ 0.263387] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
[ 0.263396] pci 0000:00:00.0: [1002:5957] type 00 class 0x060000
[ 0.263405] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
[ 0.263435] pci 0000:00:02.0: [1002:5978] type 01 class 0x060400
[ 0.263461] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.263476] pci 0000:00:07.0: [1002:597d] type 01 class 0x060400
[ 0.263502] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.263531] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
[ 0.263551] pci 0000:00:11.0: reg 10: [io 0xc000-0xc007]
[ 0.263559] pci 0000:00:11.0: reg 14: [io 0xb000-0xb003]
[ 0.263568] pci 0000:00:11.0: reg 18: [io 0xa000-0xa007]
[ 0.263577] pci 0000:00:11.0: reg 1c: [io 0x9000-0x9003]
[ 0.263585] pci 0000:00:11.0: reg 20: [io 0x8000-0x800f]
[ 0.263594] pci 0000:00:11.0: reg 24: [mem 0xfe9ff800-0xfe9ffbff]
[ 0.263613] pci 0000:00:11.0: set SATA to AHCI mode
[ 0.263665] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.263677] pci 0000:00:12.0: reg 10: [mem 0xfe9fe000-0xfe9fefff]
[ 0.263738] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
[ 0.263750] pci 0000:00:12.1: reg 10: [mem 0xfe9fd000-0xfe9fdfff]
[ 0.263816] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.263833] pci 0000:00:12.2: reg 10: [mem 0xfe9ff000-0xfe9ff0ff]
[ 0.263911] pci 0000:00:12.2: supports D1 D2
[ 0.263912] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.263934] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.263946] pci 0000:00:13.0: reg 10: [mem 0xfe9fc000-0xfe9fcfff]
[ 0.264006] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
[ 0.264019] pci 0000:00:13.1: reg 10: [mem 0xfe9fb000-0xfe9fbfff]
[ 0.264084] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.264101] pci 0000:00:13.2: reg 10: [mem 0xfe9fa800-0xfe9fa8ff]
[ 0.264179] pci 0000:00:13.2: supports D1 D2
[ 0.264180] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.264204] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.264297] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
[ 0.264312] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
[ 0.264320] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
[ 0.264329] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
[ 0.264337] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
[ 0.264346] pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f]
[ 0.264400] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.264419] pci 0000:00:14.2: reg 10: [mem 0xfe9f4000-0xfe9f7fff 64bit]
[ 0.264481] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.264495] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.264566] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.264606] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[ 0.264618] pci 0000:00:14.5: reg 10: [mem 0xfe9f9000-0xfe9f9fff]
[ 0.264681] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[ 0.264693] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[ 0.264703] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[ 0.264712] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[ 0.264724] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[ 0.264756] pci_bus 0000:01: busn_res: [bus 01] is inserted under [bus 00-ff]
[ 0.264766] pci 0000:01:00.0: [1002:683d] type 00 class 0x030000
[ 0.264775] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.264782] pci 0000:01:00.0: reg 18: [mem 0xfeac0000-0xfeafffff 64bit]
[ 0.264788] pci 0000:01:00.0: reg 20: [io 0xd000-0xd0ff]
[ 0.264796] pci 0000:01:00.0: reg 30: [mem 0xfeaa0000-0xfeabffff pref]
[ 0.264824] pci 0000:01:00.0: supports D1 D2
[ 0.264825] pci 0000:01:00.0: PME# supported from D1 D2 D3hot
[ 0.264844] pci 0000:01:00.1: [1002:aab0] type 00 class 0x040300
[ 0.264853] pci 0000:01:00.1: reg 10: [mem 0xfea9c000-0xfea9ffff 64bit]
[ 0.264900] pci 0000:01:00.1: supports D1 D2
[ 0.269163] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.269170] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
[ 0.269172] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.269175] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.269196] pci_bus 0000:02: busn_res: [bus 02] is inserted under [bus 00-ff]
[ 0.269217] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.269230] pci 0000:02:00.0: reg 10: [io 0xe800-0xe8ff]
[ 0.269249] pci 0000:02:00.0: reg 18: [mem 0xfdfff000-0xfdffffff 64bit pref]
[ 0.269261] pci 0000:02:00.0: reg 20: [mem 0xfdff8000-0xfdffbfff 64bit pref]
[ 0.269269] pci 0000:02:00.0: reg 30: [mem 0xfebe0000-0xfebfffff pref]
[ 0.269315] pci 0000:02:00.0: supports D1 D2
[ 0.269317] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.275825] pci 0000:00:07.0: PCI bridge to [bus 02]
[ 0.275831] pci 0000:00:07.0: bridge window [io 0xe000-0xefff]
[ 0.275833] pci 0000:00:07.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.275836] pci 0000:00:07.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.275851] pci_bus 0000:03: busn_res: [bus 03] is inserted under [bus 00-ff]
[ 0.275898] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
[ 0.275907] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.275908] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.275909] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.275911] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.275912] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xdfffffff] (subtractive decode)
[ 0.275914] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[ 0.275927] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.276055] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[ 0.276077] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]
[ 0.276106] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[ 0.276147] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.276149] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.278757] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *7 10 11 12 14 15)
[ 0.278785] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 *10 11 12 14 15)
[ 0.278809] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15)
[ 0.278832] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 *11 12 14 15)
[ 0.278855] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.278880] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.278903] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 *9 10 11 12 14 15)
[ 0.278926] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.279015] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.279017] vgaarb: loaded
[ 0.279017] vgaarb: bridge control possible 0000:01:00.0
[ 0.279046] PCI: Using ACPI for IRQ routing
[ 0.287252] PCI: pci_cache_line_size set to 64 bytes
[ 0.287258] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
[ 0.287314] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
[ 0.287315] e820: reserve RAM buffer [mem 0xcffb0000-0xcfffffff]
[ 0.287385] NetLabel: Initializing
[ 0.287385] NetLabel: domain hash size = 128
[ 0.287386] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.287394] NetLabel: unlabeled traffic allowed by default
[ 0.287409] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.287412] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.289438] Switching to clocksource hpet
[ 0.293692] pnp: PnP ACPI init
[ 0.293708] ACPI: bus type pnp registered
[ 0.293795] pnp 00:00: [bus 00-ff]
[ 0.293797] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.293798] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.293800] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.293801] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.293802] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.293804] pnp 00:00: [mem 0xd0000000-0xdfffffff window]
[ 0.293808] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
[ 0.293850] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.293873] pnp 00:01: [dma 4]
[ 0.293875] pnp 00:01: [io 0x0000-0x000f]
[ 0.293876] pnp 00:01: [io 0x0081-0x0083]
[ 0.293877] pnp 00:01: [io 0x0087]
[ 0.293878] pnp 00:01: [io 0x0089-0x008b]
[ 0.293879] pnp 00:01: [io 0x008f]
[ 0.293880] pnp 00:01: [io 0x00c0-0x00df]
[ 0.293898] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.293904] pnp 00:02: [io 0x0070-0x0071]
[ 0.293913] pnp 00:02: [irq 8]
[ 0.293927] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.293933] pnp 00:03: [io 0x0061]
[ 0.293950] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.293954] pnp 00:04: [io 0x00f0-0x00ff]
[ 0.293958] pnp 00:04: [irq 13]
[ 0.293972] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.294136] pnp 00:05: [mem 0xfed00000-0xfed003ff]
[ 0.294153] pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.294179] pnp 00:06: [mem 0xfec00000-0xfec00fff]
[ 0.294180] pnp 00:06: [mem 0xfee00000-0xfee00fff]
[ 0.294219] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.294221] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.294223] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.294269] pnp 00:07: [io 0x0010-0x001f]
[ 0.294270] pnp 00:07: [io 0x0022-0x003f]
[ 0.294271] pnp 00:07: [io 0x0062-0x0063]
[ 0.294272] pnp 00:07: [io 0x0065-0x006f]
[ 0.294274] pnp 00:07: [io 0x0072-0x007f]
[ 0.294275] pnp 00:07: [io 0x0080]
[ 0.294276] pnp 00:07: [io 0x0084-0x0086]
[ 0.294277] pnp 00:07: [io 0x0088]
[ 0.294278] pnp 00:07: [io 0x008c-0x008e]
[ 0.294279] pnp 00:07: [io 0x0090-0x009f]
[ 0.294280] pnp 00:07: [io 0x00a2-0x00bf]
[ 0.294281] pnp 00:07: [io 0x00b1]
[ 0.294282] pnp 00:07: [io 0x00e0-0x00ef]
[ 0.294283] pnp 00:07: [io 0x04d0-0x04d1]
[ 0.294284] pnp 00:07: [io 0x040b]
[ 0.294285] pnp 00:07: [io 0x04d6]
[ 0.294287] pnp 00:07: [io 0x0c00-0x0c01]
[ 0.294288] pnp 00:07: [io 0x0c14]
[ 0.294289] pnp 00:07: [io 0x0c50-0x0c51]
[ 0.294290] pnp 00:07: [io 0x0c52]
[ 0.294291] pnp 00:07: [io 0x0c6c]
[ 0.294292] pnp 00:07: [io 0x0c6f]
[ 0.294293] pnp 00:07: [io 0x0cd0-0x0cd1]
[ 0.294294] pnp 00:07: [io 0x0cd2-0x0cd3]
[ 0.294295] pnp 00:07: [io 0x0cd4-0x0cd5]
[ 0.294296] pnp 00:07: [io 0x0cd6-0x0cd7]
[ 0.294299] pnp 00:07: [io 0x0cd8-0x0cdf]
[ 0.294300] pnp 00:07: [io 0x0800-0x089f]
[ 0.294301] pnp 00:07: [io 0x0b20-0x0b2f]
[ 0.294303] pnp 00:07: [io 0x0000-0xffffffffffffffff disabled]
[ 0.294304] pnp 00:07: [io 0x0900-0x090f]
[ 0.294305] pnp 00:07: [io 0x0910-0x091f]
[ 0.294306] pnp 00:07: [io 0xfe00-0xfefe]
[ 0.294307] pnp 00:07: [mem 0xffb80000-0xffbfffff]
[ 0.294308] pnp 00:07: [mem 0xfec10000-0xfec1001f]
[ 0.294355] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.294357] system 00:07: [io 0x040b] has been reserved
[ 0.294358] system 00:07: [io 0x04d6] has been reserved
[ 0.294360] system 00:07: [io 0x0c00-0x0c01] has been reserved
[ 0.294361] system 00:07: [io 0x0c14] has been reserved
[ 0.294362] system 00:07: [io 0x0c50-0x0c51] has been reserved
[ 0.294364] system 00:07: [io 0x0c52] has been reserved
[ 0.294365] system 00:07: [io 0x0c6c] has been reserved
[ 0.294367] system 00:07: [io 0x0c6f] has been reserved
[ 0.294368] system 00:07: [io 0x0cd0-0x0cd1] has been reserved
[ 0.294370] system 00:07: [io 0x0cd2-0x0cd3] has been reserved
[ 0.294371] system 00:07: [io 0x0cd4-0x0cd5] has been reserved
[ 0.294373] system 00:07: [io 0x0cd6-0x0cd7] has been reserved
[ 0.294374] system 00:07: [io 0x0cd8-0x0cdf] has been reserved
[ 0.294376] system 00:07: [io 0x0800-0x089f] has been reserved
[ 0.294377] system 00:07: [io 0x0b20-0x0b2f] has been reserved
[ 0.294379] system 00:07: [io 0x0900-0x090f] has been reserved
[ 0.294380] system 00:07: [io 0x0910-0x091f] has been reserved
[ 0.294382] system 00:07: [io 0xfe00-0xfefe] has been reserved
[ 0.294383] system 00:07: [mem 0xffb80000-0xffbfffff] has been reserved
[ 0.294385] system 00:07: [mem 0xfec10000-0xfec1001f] has been reserved
[ 0.294387] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.294485] pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]
[ 0.294487] pnp 00:08: [io 0x0e00-0x0e0f]
[ 0.294488] pnp 00:08: [io 0x0e80-0x0e8f]
[ 0.294489] pnp 00:08: [io 0x0f40-0x0f4f]
[ 0.294490] pnp 00:08: [io 0x0a30-0x0a3f]
[ 0.294515] system 00:08: [io 0x0e00-0x0e0f] has been reserved
[ 0.294517] system 00:08: [io 0x0e80-0x0e8f] has been reserved
[ 0.294518] system 00:08: [io 0x0f40-0x0f4f] has been reserved
[ 0.294520] system 00:08: [io 0x0a30-0x0a3f] has been reserved
[ 0.294521] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.294814] pnp 00:09: [io 0x03f8-0x03ff]
[ 0.294817] pnp 00:09: [irq 4]
[ 0.294819] pnp 00:09: [dma 0 disabled]
[ 0.294877] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.294896] pnp 00:0a: [mem 0xe0000000-0xefffffff]
[ 0.294922] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.294924] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.295589] pnp 00:0b: [mem 0x00000000-0x0009ffff]
[ 0.295593] pnp 00:0b: [mem 0x000c0000-0x000cffff]
[ 0.295594] pnp 00:0b: [mem 0x000e0000-0x000fffff]
[ 0.295596] pnp 00:0b: [mem 0x00100000-0xcfffffff]
[ 0.295597] pnp 00:0b: [mem 0xfec00000-0xffffffff]
[ 0.295602] pnp 00:0b: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.295605] pnp 00:0b: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.295606] pnp 00:0b: disabling [mem 0x000e0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.295608] pnp 00:0b: disabling [mem 0x00100000-0xcfffffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.295676] system 00:0b: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.295679] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.295746] pnp: PnP ACPI: found 12 devices
[ 0.295747] ACPI: ACPI bus type pnp unregistered
[ 0.301953] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.301957] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
[ 0.301959] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.301961] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.301964] pci 0000:00:07.0: PCI bridge to [bus 02]
[ 0.301966] pci 0000:00:07.0: bridge window [io 0xe000-0xefff]
[ 0.301968] pci 0000:00:07.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.301970] pci 0000:00:07.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.301972] pci 0000:00:14.4: PCI bridge to [bus 03]
[ 0.302004] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.302006] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.302007] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.302009] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.302010] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff]
[ 0.302011] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.302013] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.302014] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.302015] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.302017] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.302018] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.302020] pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.302021] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.302023] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.302024] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.302025] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.302026] pci_bus 0000:03: resource 8 [mem 0xd0000000-0xdfffffff]
[ 0.302028] pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.302060] NET: Registered protocol family 2
[ 0.302505] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.305279] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.305623] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.305670] TCP: reno registered
[ 0.305682] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.305738] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.305852] NET: Registered protocol family 1
[ 0.709156] pci 0000:01:00.0: Boot video device
[ 0.709164] PCI: CLS 64 bytes, default 64
[ 0.709211] Unpacking initramfs...
[ 0.763840] Freeing initrd memory: 3624k freed
[ 0.768681] PCI-DMA: Disabling AGP.
[ 0.768756] PCI-DMA: aperture base @ c4000000 size 65536 KB
[ 0.768757] PCI-DMA: using GART IOMMU.
[ 0.768759] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.770950] LVT offset 1 assigned for vector 0x400
[ 0.770961] IBS: LVT offset 1 assigned
[ 0.770991] perf: AMD IBS detected (0x0000001f)
[ 0.771163] audit: initializing netlink socket (disabled)
[ 0.771174] type=2000 audit(1354687482.663:1): initialized
[ 0.779373] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.781185] VFS: Disk quotas dquot_6.5.2
[ 0.781221] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.781361] msgmni has been set to 15975
[ 0.781756] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.781858] io scheduler noop registered
[ 0.781862] io scheduler deadline registered
[ 0.781917] io scheduler cfq registered (default)
[ 0.782032] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 0.782139] pcieport 0000:00:07.0: irq 41 for MSI/MSI-X
[ 0.782269] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
[ 0.782271] vesafb: scrolling: redraw
[ 0.782273] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 0.782627] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90011600000, using 8128k, total 8128k
[ 0.803841] Console: switching to colour frame buffer device 240x67
[ 0.824881] fb0: VESA VGA frame buffer device
[ 0.824906] GHES: HEST is not enabled!
[ 0.824976] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.845555] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.866408] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.866594] Linux agpgart interface v0.103
[ 0.866629] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.866990] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.867005] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.867108] mousedev: PS/2 mouse device common for all mice
[ 0.867134] rtc_cmos 00:02: RTC can wake from S4
[ 0.867262] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.867284] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.867289] cpuidle: using governor ladder
[ 0.867291] cpuidle: using governor menu
[ 0.867406] drop_monitor: Initializing network drop monitor service
[ 0.867460] TCP: cubic registered
[ 0.867524] NET: Registered protocol family 10
[ 0.867628] NET: Registered protocol family 17
[ 0.867635] Key type dns_resolver registered
[ 0.867897] PM: Checking hibernation image partition /dev/sda6
[ 0.867900] PM: Hibernation image not present or could not be loaded.
[ 0.867907] registered taskstats version 1
[ 0.868557] rtc_cmos 00:02: setting system clock to 2012-12-05 06:04:42 UTC (1354687482)
[ 0.869382] Freeing unused kernel memory: 772k freed
[ 0.869544] Write protecting the kernel read-only data: 8192k
[ 0.872682] Freeing unused kernel memory: 1408k freed
[ 0.874248] Freeing unused kernel memory: 568k freed
[ 0.882124] systemd-udevd[48]: starting version 196
[ 0.884645] [drm] Initialized drm 1.1.0 20060810
[ 0.889084] [drm] radeon defaulting to kernel modesetting.
[ 0.889088] [drm] radeon kernel modesetting enabled.
[ 0.889166] checking generic (d0000000 7f0000) vs hw (d0000000 10000000)
[ 0.889170] fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
[ 0.889188] Console: switching to colour dummy device 80x25
[ 0.889525] [drm] initializing kernel modesetting (VERDE 0x1002:0x683D 0x1787:0x201C).
[ 0.889562] [drm] register mmio base: 0xFEAC0000
[ 0.889563] [drm] register mmio size: 262144
[ 0.890235] ATOM BIOS: VERDE
[ 0.890258] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[ 0.890260] radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
[ 0.890499] [drm] Detected VRAM RAM=1024M, BAR=256M
[ 0.890502] [drm] RAM width 128bits DDR
[ 0.890578] [TTM] Zone kernel: Available graphics memory: 4090978 kiB
[ 0.890579] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 0.890580] [TTM] Initializing pool allocator
[ 0.890583] [TTM] Initializing DMA pool allocator
[ 0.890606] [drm] radeon: 1024M of VRAM memory ready
[ 0.890607] [drm] radeon: 512M of GTT memory ready.
[ 0.890619] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 0.890620] [drm] Driver supports precise vblank timestamp query.
[ 0.890654] radeon 0000:01:00.0: irq 42 for MSI/MSI-X
[ 0.890661] radeon 0000:01:00.0: radeon: using MSI.
[ 0.890682] [drm] radeon: irq initialized.
[ 0.890686] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 0.891680] [drm] Loading VERDE Microcode
[ 1.257750] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[ 1.257841] radeon 0000:01:00.0: WB enabled
[ 1.257844] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880222b5ec00
[ 1.257846] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000040000c04 and cpu addr 0xffff880222b5ec04
[ 1.257847] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000040000c08 and cpu addr 0xffff880222b5ec08
[ 1.276350] [drm] ring test on 0 succeeded in 1 usecs
[ 1.276354] [drm] ring test on 1 succeeded in 1 usecs
[ 1.276358] [drm] ring test on 2 succeeded in 1 usecs
[ 1.282858] [drm] ib test on ring 0 succeeded in 0 usecs
[ 1.282901] [drm] ib test on ring 1 succeeded in 0 usecs
[ 1.282938] [drm] ib test on ring 2 succeeded in 0 usecs
[ 1.283686] [drm] Radeon Display Connectors
[ 1.283687] [drm] Connector 0:
[ 1.283688] [drm] DP-1
[ 1.283689] [drm] HPD2
[ 1.283691] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[ 1.283691] [drm] Encoders:
[ 1.283692] [drm] DFP1: INTERNAL_UNIPHY2
[ 1.283693] [drm] Connector 1:
[ 1.283693] [drm] DP-2
[ 1.283694] [drm] HPD3
[ 1.283695] [drm] DDC: 0x6570 0x6570 0x6574 0x6574 0x6578 0x6578 0x657c 0x657c
[ 1.283696] [drm] Encoders:
[ 1.283697] [drm] DFP2: INTERNAL_UNIPHY2
[ 1.283697] [drm] Connector 2:
[ 1.283698] [drm] HDMI-A-1
[ 1.283699] [drm] HPD1
[ 1.283700] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[ 1.283700] [drm] Encoders:
[ 1.283701] [drm] DFP3: INTERNAL_UNIPHY1
[ 1.283702] [drm] Connector 3:
[ 1.283702] [drm] DVI-I-1
[ 1.283703] [drm] HPD4
[ 1.283704] [drm] DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c
[ 1.283704] [drm] Encoders:
[ 1.283705] [drm] DFP4: INTERNAL_UNIPHY
[ 1.283706] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 1.283755] [drm] Internal thermal controller with fan control
[ 1.283797] [drm] radeon: power management initialized
[ 1.331226] [drm] fb mappable at 0xD1143000
[ 1.331229] [drm] vram apper at 0xD0000000
[ 1.331229] [drm] size 8294400
[ 1.331230] [drm] fb depth is 24
[ 1.331231] [drm] pitch is 7680
[ 1.331318] fbcon: radeondrmfb (fb0) is primary device
[ 1.346802] Console: switching to colour frame buffer device 240x67
[ 1.352720] fb0: radeondrmfb frame buffer device
[ 1.352721] drm: registered panic notifier
[ 1.352725] [drm] Initialized radeon 2.24.0 20080528 for 0000:01:00.0 on minor 0
[ 1.375410] SCSI subsystem initialized
[ 1.377255] ACPI: bus type usb registered
[ 1.377282] usbcore: registered new interface driver usbfs
[ 1.377319] usbcore: registered new interface driver hub
[ 1.378320] usbcore: registered new device driver usb
[ 1.379984] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.380053] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 1.380064] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.380075] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.380102] ehci_hcd 0000:00:12.2: debug port 1
[ 1.380123] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe9ff000
[ 1.380154] ACPI: bus type scsi registered
[ 1.380213] libata version 3.00 loaded.
[ 1.388514] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.388661] hub 1-0:1.0: USB hub found
[ 1.388664] hub 1-0:1.0: 6 ports detected
[ 1.388797] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 1.388802] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.388806] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.388834] ehci_hcd 0000:00:13.2: debug port 1
[ 1.388855] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe9fa800
[ 1.398500] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.398656] hub 2-0:1.0: USB hub found
[ 1.398659] hub 2-0:1.0: 6 ports detected
[ 1.398746] ahci 0000:00:11.0: version 3.0
[ 1.398828] ahci 0000:00:11.0: irq 43 for MSI/MSI-X
[ 1.398909] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 1.398911] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 1.399083] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.399512] scsi0 : ahci
[ 1.399610] scsi1 : ahci
[ 1.399654] scsi2 : ahci
[ 1.399696] scsi3 : ahci
[ 1.399728] ata1: SATA max UDMA/133 abar m1024@0xfe9ff800 port 0xfe9ff900 irq 43
[ 1.399732] ata2: SATA max UDMA/133 abar m1024@0xfe9ff800 port 0xfe9ff980 irq 43
[ 1.399735] ata3: SATA max UDMA/133 abar m1024@0xfe9ff800 port 0xfe9ffa00 irq 43
[ 1.399737] ata4: SATA max UDMA/133 abar m1024@0xfe9ff800 port 0xfe9ffa80 irq 43
[ 1.399854] pata_atiixp 0000:00:14.1: setting latency timer to 64
[ 1.400149] scsi4 : pata_atiixp
[ 1.400455] scsi5 : pata_atiixp
[ 1.400638] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 1.400639] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 1.400728] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 1.400735] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 1.400759] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe9fe000
[ 1.455951] hub 3-0:1.0: USB hub found
[ 1.455959] hub 3-0:1.0: 3 ports detected
[ 1.456074] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 1.456079] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 1.456094] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe9fd000
[ 1.512562] hub 4-0:1.0: USB hub found
[ 1.512569] hub 4-0:1.0: 3 ports detected
[ 1.512679] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.512684] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.512711] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe9fc000
[ 1.569169] hub 5-0:1.0: USB hub found
[ 1.569176] hub 5-0:1.0: 3 ports detected
[ 1.569277] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 1.569282] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 1.569302] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe9fb000
[ 1.625801] hub 6-0:1.0: USB hub found
[ 1.625808] hub 6-0:1.0: 3 ports detected
[ 1.625907] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 1.625913] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
[ 1.625935] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe9f9000
[ 1.682426] hub 7-0:1.0: USB hub found
[ 1.682433] hub 7-0:1.0: 2 ports detected
[ 1.718239] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.718349] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.771489] tsc: Refined TSC clocksource calibration: 3300.185 MHz
[ 1.771500] Switching to clocksource tsc
[ 1.884730] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.884764] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.885647] ata1.00: ATA-8: Hitachi HDS721050CLA362, JP2OA3MA, max UDMA/133
[ 1.885651] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.886648] ata1.00: configured for UDMA/133
[ 1.886842] scsi 0:0:0:0: Direct-Access ATA Hitachi HDS72105 JP2O PQ: 0 ANSI: 5
[ 1.887755] ata4.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN03, max UDMA/100
[ 1.891575] ata4.00: configured for UDMA/100
[ 1.900118] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS50 TN03 PQ: 0 ANSI: 5
[ 1.904493] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.904521] sd 0:0:0:0: [sda] Write Protect is off
[ 1.904524] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.904574] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.960469] sda: sda1 sda2 < sda5 sda6 >
[ 1.961148] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.970258] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.970262] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.970468] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 2.304203] Btrfs loaded
[ 2.341155] device label root devid 1 transid 4703 /dev/sda1
[ 2.356296] device label home devid 1 transid 12756 /dev/sda5
[ 2.358335] PM: Starting manual resume from disk
[ 2.358338] PM: Hibernation image partition 8:6 present
[ 2.358339] PM: Looking for hibernation image.
[ 2.361170] PM: Image not found (code -22)
[ 2.361173] PM: Hibernation image not present or could not be loaded.
[ 2.410897] usb 3-1: new low-speed USB device number 2 using ohci_hcd
[ 2.443887] device label root devid 1 transid 4703 /dev/sda1
[ 2.444603] btrfs: disk space caching is enabled
[ 2.624746] usbcore: registered new interface driver usbhid
[ 2.624749] usbhid: USB HID core driver
[ 2.840498] usb 3-2: new low-speed USB device number 3 using ohci_hcd
[ 3.209064] systemd[1]: systemd 196 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ; arch)
[ 3.220241] systemd[1]: Set hostname to <username-pc>.
[ 3.310066] usb 4-1: new full-speed USB device number 2 using ohci_hcd
[ 3.349360] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 3.349401] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.349413] systemd[1]: Starting Remote File Systems.
[ 3.349422] systemd[1]: Reached target Remote File Systems.
[ 3.349428] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 3.349446] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 3.349452] systemd[1]: Starting Delayed Shutdown Socket.
[ 3.349471] systemd[1]: Listening on Delayed Shutdown Socket.
[ 3.349521] systemd[1]: Starting udev Kernel Socket.
[ 3.349536] systemd[1]: Listening on udev Kernel Socket.
[ 3.349568] systemd[1]: Starting udev Control Socket.
[ 3.349583] systemd[1]: Listening on udev Control Socket.
[ 3.349607] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 3.349685] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 3.349694] systemd[1]: Starting Encrypted Volumes.
[ 3.349700] systemd[1]: Reached target Encrypted Volumes.
[ 3.349708] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 3.349732] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 3.349739] systemd[1]: Expecting device dev-sda6.device...
[ 3.349748] systemd[1]: Expecting device dev-disk-by\x2dlabel-home.device...
[ 3.349759] systemd[1]: Starting Journal Socket.
[ 3.349793] systemd[1]: Listening on Journal Socket.
[ 3.349813] systemd[1]: Starting File System Check on Root Device...
[ 3.383483] systemd[1]: Mounting Temporary Directory...
[ 3.386982] systemd[1]: Mounting Huge Pages File System...
[ 3.396992] systemd[1]: Mounting POSIX Message Queue File System...
[ 3.411780] systemd[1]: Starting udev Coldplug all Devices...
[ 3.473293] systemd[1]: Started Load Kernel Modules.
[ 3.473319] systemd[1]: Mounted Configuration File System.
[ 3.473331] systemd[1]: Mounting Debug File System...
[ 3.503316] systemd[1]: Starting Setup Virtual Console...
[ 3.635877] systemd[1]: Starting Apply Kernel Variables...
[ 3.644380] systemd[1]: Mounted FUSE Control File System.
[ 3.681773] systemd[1]: Starting Set Up Additional Binary Formats...
[ 3.693922] systemd[1]: Starting udev Kernel Device Manager...
[ 3.699903] systemd[1]: Starting Journal Service...
[ 3.726363] usb 5-2: new low-speed USB device number 2 using ohci_hcd
[ 3.729870] systemd[1]: Started Journal Service.
[ 3.733092] systemd[1]: Started File System Check on Root Device.
[ 3.733146] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 3.987619] systemd-udevd[148]: starting version 196
[ 4.264369] btrfs: disk space caching is enabled
[ 4.652532] microcode: CPU0: patch_level=0x010000c8
[ 4.721684] microcode: CPU1: patch_level=0x010000c8
[ 4.722492] microcode: CPU2: patch_level=0x010000c8
[ 4.723342] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 4.805102] input: PC Speaker as /devices/platform/pcspkr/input/input0
[ 4.833306] MCE: In-kernel MCE decoding enabled.
[ 4.837493] EDAC MC: Ver: 3.0.0
[ 4.884222] kvm: Nested Virtualization enabled
[ 4.884225] kvm: Nested Paging enabled
[ 4.975464] AMD64 EDAC driver v3.4.0
[ 4.975512] EDAC amd64: DRAM ECC disabled.
[ 4.975521] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 4.994606] hda_intel: position_fix set to 1 for device 1565:8218
[ 5.059919] wmi: Mapper loaded
[ 5.146045] input: USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/input/input1
[ 5.146119] hid-generic 0003:09DA:0260.0001: input,hidraw0: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:12.0-1/input0
[ 5.151317] input: USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.1/input/input2
[ 5.151391] hid-generic 0003:09DA:0260.0002: input,hidraw1: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:12.0-1/input1
[ 5.151541] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/input/input3
[ 5.151631] hid-generic 0003:046D:C046.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB Optical Mouse] on usb-0000:00:12.0-2/input0
[ 5.151893] input: USB Keyboard as /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.0/input/input4
[ 5.152017] hid-generic 0003:04D9:1603.0004: input,hidraw3: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:13.0-2/input0
[ 5.156603] input: USB Keyboard as /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.1/input/input5
[ 5.156676] hid-generic 0003:04D9:1603.0005: input,hidraw4: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:13.0-2/input1
[ 5.181052] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input6
[ 5.181058] ACPI: Power Button [PWRB]
[ 5.181100] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[ 5.181102] ACPI: Power Button [PWRF]
[ 5.299174] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[ 5.299265] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[ 5.299326] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 5.299371] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[ 5.299433] input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
[ 5.299646] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SOR1 1 (20120711/utaddress-251)
[ 5.299650] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.299677] hda-intel: 0000:01:00.1: Handle VGA-switcheroo audio client
[ 5.299681] hda-intel: Force to non-snoop mode
[ 5.299770] snd_hda_intel 0000:01:00.1: irq 44 for MSI/MSI-X
[ 5.320936] usbcore: registered new interface driver snd-usb-audio
[ 5.330947] thermal LNXTHERM:00: registered as thermal_zone0
[ 5.330950] ACPI: Thermal Zone [THRM] (22 C)
[ 5.351444] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 5.351672] r8169 0000:02:00.0: irq 45 for MSI/MSI-X
[ 5.351849] r8169 0000:02:00.0: eth0: RTL8168d/8111d at 0xffffc900115b4000, 00:30:67:80:09:98, XID 081000c0 IRQ 45
[ 5.351851] r8169 0000:02:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 5.417961] sp5100_tco: SP5100 TCO WatchDog Timer Driver v0.01
[ 5.418019] sp5100_tco: mmio address 0xfec000f0 already in use
[ 5.526015] powernow-k8: Found 1 AMD Athlon(tm) II X3 455 Processor (3 cpu cores) (version 2.20.00)
[ 5.526050] powernow-k8: 0 : pstate 0 (3300 MHz)
[ 5.526051] powernow-k8: 1 : pstate 1 (2600 MHz)
[ 5.526051] powernow-k8: 2 : pstate 2 (2100 MHz)
[ 5.526052] powernow-k8: 3 : pstate 3 (800 MHz)
[ 5.694182] device label root devid 1 transid 4703 /dev/sda1
[ 5.798696] device label home devid 1 transid 12756 /dev/sda5
[ 5.931970] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input13
[ 5.932214] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input14
[ 5.932423] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input15
[ 5.932691] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input16
[ 5.932965] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input17
[ 5.933246] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input18
[ 6.074578] Adding 7915516k swap on /dev/sda6. Priority:-1 extents:1 across:7915516k
[ 6.286004] device label home devid 1 transid 12756 /dev/sda5
[ 6.287343] btrfs: disk space caching is enabled
[ 6.519896] systemd-journald[149]: Received SIGUSR1
[ 7.652509] systemd-logind[297]: Watching system buttons on /dev/input/event7 (Power Button)
[ 7.652767] systemd-logind[297]: Watching system buttons on /dev/input/event6 (Power Button)
[ 10.558059] r8169 0000:02:00.0: eth0: link down
[ 10.558088] r8169 0000:02:00.0: eth0: link down
[ 10.558121] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.703110] r8169 0000:02:00.0: eth0: link up
[ 12.703129] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 13.436001] sit: IPv6 over IPv4 tunneling driver
[ 23.465586] systemd-logind[297]: Linked /tmp/.X11-unix/X0 to /run/user/1000/X11-display.
Xorg log
[ 10.659]
X.Org X Server 1.13.0
Release Date: 2012-09-05
[ 10.659] X Protocol Version 11, Revision 0
[ 10.659] Build Operating System: Linux 3.6.3-1-ARCH x86_64
[ 10.659] Current Operating System: Linux username-pc 3.6.8-1-ARCH #1 SMP PREEMPT Mon Nov 26 22:10:40 CET 2012 x86_64
[ 10.659] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=6820a5fc-5e11-4854-929c-62edccd80ff8 resume=/dev/sda6 ro quiet
[ 10.659] Build Date: 08 November 2012 07:09:29PM
[ 10.659]
[ 10.659] Current version of pixman: 0.28.0
[ 10.660] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 10.660] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 10.660] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Dec 5 08:04:52 2012
[ 10.698] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 10.704] (==) No Layout section. Using the first Screen section.
[ 10.704] (==) No screen section available. Using defaults.
[ 10.704] (**) |-->Screen "Default Screen Section" (0)
[ 10.704] (**) | |-->Monitor "<default monitor>"
[ 10.705] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 10.705] (==) Automatically adding devices
[ 10.705] (==) Automatically enabling devices
[ 10.705] (==) Automatically adding GPU devices
[ 10.902] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 10.902] Entry deleted from font path.
[ 10.903] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 10.903] Entry deleted from font path.
[ 10.903] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 10.904] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 10.904] Entry deleted from font path.
[ 10.904] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 10.904] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/
[ 10.904] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 10.904] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 10.904] (II) Loader magic: 0x7fcc40
[ 10.904] (II) Module ABI versions:
[ 10.904] X.Org ANSI C Emulation: 0.4
[ 10.904] X.Org Video Driver: 13.1
[ 10.904] X.Org XInput driver : 18.0
[ 10.904] X.Org Server Extension : 7.0
[ 10.905] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 10.908] (--) PCI:*(0:1:0:0) 1002:683d:1787:201c rev 0, Mem @ 0xd0000000/268435456, 0xfeac0000/262144, I/O @ 0x0000d000/256, BIOS @ 0x????????/131072
[ 10.908] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 10.908] Initializing built-in extension Generic Event Extension
[ 10.908] Initializing built-in extension SHAPE
[ 10.908] Initializing built-in extension MIT-SHM
[ 10.908] Initializing built-in extension XInputExtension
[ 10.908] Initializing built-in extension XTEST
[ 10.908] Initializing built-in extension BIG-REQUESTS
[ 10.908] Initializing built-in extension SYNC
[ 10.908] Initializing built-in extension XKEYBOARD
[ 10.908] Initializing built-in extension XC-MISC
[ 10.908] Initializing built-in extension SECURITY
[ 10.908] Initializing built-in extension XINERAMA
[ 10.908] Initializing built-in extension XFIXES
[ 10.908] Initializing built-in extension RENDER
[ 10.908] Initializing built-in extension RANDR
[ 10.908] Initializing built-in extension COMPOSITE
[ 10.908] Initializing built-in extension DAMAGE
[ 10.908] Initializing built-in extension MIT-SCREEN-SAVER
[ 10.908] Initializing built-in extension DOUBLE-BUFFER
[ 10.908] Initializing built-in extension RECORD
[ 10.908] Initializing built-in extension DPMS
[ 10.908] Initializing built-in extension X-Resource
[ 10.908] Initializing built-in extension XVideo
[ 10.908] Initializing built-in extension XVideo-MotionCompensation
[ 10.908] Initializing built-in extension XFree86-VidModeExtension
[ 10.908] Initializing built-in extension XFree86-DGA
[ 10.908] Initializing built-in extension XFree86-DRI
[ 10.908] Initializing built-in extension DRI2
[ 10.908] (II) LoadModule: "glx"
[ 10.923] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 10.938] (II) Module glx: vendor="X.Org Foundation"
[ 10.938] compiled for 1.13.0, module version = 1.0.0
[ 10.938] ABI class: X.Org Server Extension, version 7.0
[ 10.938] (==) AIGLX enabled
[ 10.938] Loading extension GLX
[ 10.938] (==) Matched ati as autoconfigured driver 0
[ 10.938] (==) Matched ati as autoconfigured driver 1
[ 10.938] (==) Matched vesa as autoconfigured driver 2
[ 10.938] (==) Matched modesetting as autoconfigured driver 3
[ 10.938] (==) Matched fbdev as autoconfigured driver 4
[ 10.938] (==) Assigned the driver to the xf86ConfigLayout
[ 10.938] (II) LoadModule: "ati"
[ 10.950] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 10.963] (II) Module ati: vendor="X.Org Foundation"
[ 10.963] compiled for 1.13.0, module version = 7.0.0
[ 10.963] Module class: X.Org Video Driver
[ 10.963] ABI class: X.Org Video Driver, version 13.0
[ 10.963] (II) LoadModule: "radeon"
[ 10.963] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 11.114] (II) Module radeon: vendor="X.Org Foundation"
[ 11.114] compiled for 1.13.0, module version = 7.0.0
[ 11.114] Module class: X.Org Video Driver
[ 11.114] ABI class: X.Org Video Driver, version 13.0
[ 11.114] (II) LoadModule: "vesa"
[ 11.132] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 11.138] (II) Module vesa: vendor="X.Org Foundation"
[ 11.139] compiled for 1.13.0, module version = 2.3.2
[ 11.139] Module class: X.Org Video Driver
[ 11.139] ABI class: X.Org Video Driver, version 13.0
[ 11.139] (II) LoadModule: "modesetting"
[ 11.139] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 11.149] (II) Module modesetting: vendor="X.Org Foundation"
[ 11.149] compiled for 1.13.0, module version = 0.5.0
[ 11.149] Module class: X.Org Video Driver
[ 11.149] ABI class: X.Org Video Driver, version 13.0
[ 11.149] (II) LoadModule: "fbdev"
[ 11.162] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 11.163] (II) Module fbdev: vendor="X.Org Foundation"
[ 11.164] compiled for 1.13.0, module version = 0.4.3
[ 11.164] Module class: X.Org Video Driver
[ 11.164] ABI class: X.Org Video Driver, version 13.0
[ 11.164] (II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI

Same issue with my HD6670. I didn't notice until I installed Steam and it was unusable. Since you have a 7000 series card, try this: https://bbs.archlinux.org/viewtopic.php?pid=1250981
EDIT: I just noticed how old this thread was.
Last edited by nadman10 (2013-04-06 19:11:40)

Xorg disables keyboard and mice [solved]

after last update I cant use the trackpoint and keyboard on my IBM T40 under x, only the touchpad works.
here is my xorg.conf
# File generated by xorgconfig.
# Copyright 2004 The X.Org Foundation
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
# Refer to the xorg.conf(5) man page for details about the format of
# this file.
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the font modules
# Load "type1"
Load "freetype"
# Load "xtt"
# This loads the GLX module
# Load "glx"
# This loads the DRI module
# Load "dri"
EndSection
# Files section. This allows default font and rgb paths to be set
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# RgbPath "/usr/share/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
# FontPath "/usr/lib/X11/fonts/local/"
# FontPath "/usr/lib/X11/fonts/misc/"
# FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/Speedo/"
# FontPath "/usr/lib/X11/fonts/Type1/"
# FontPath "/usr/lib/X11/fonts/TrueType/"
# FontPath "/usr/lib/X11/fonts/freefont/"
# FontPath "/usr/lib/X11/fonts/75dpi/"
# FontPath "/usr/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/lib/modules"
EndSection
# Server flags section.
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.
# Option "DontVTSwitch"
# Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# Input devices
# Core keyboard's InputDevice section
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
Option "XkbVariant" "nodeadkeys"
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for Xorg
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "de"
EndSection
# Core Pointer's InputDevice section
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "Auto" # Auto detect
Option "Device" "/dev/input/mice"
# Mouse-speed setting for PS/2 mouse.
# Option "Resolution" "256"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
# horizontal wheel to buttons 6 & 7. Change if your mouse has more than
# 3 buttons and you need to map the wheel to different button ids to avoid
# conflicts.
Option "ZAxisMapping" "4 5 6 7"
# Emulate3Buttons is an option for 2-button mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
Section "InputDevice"
Identifier "SynapticsMouse1"
Driver "synaptics"
Option "Protocol" "auto-dev"
Option "Device" "/dev/input/mice"
Option "MinSpeed" "0.09"
Option "MaxSpeed" "0.18"
Option "BottomEdge" "4200"
Option "SHMConfig" "on"
Option "FingerLow" "25"
Option "LeftEdge" "1700"
Option "MaxTapMove" "220"
Option "MaxTapTime" "180"
Option "FingerHigh" "30"
Option "VertScrollDelta" "100"
Option "TopEdge" "1700"
Option "AccelFactor" "0.0015"
Option "RightEdge" "5300"
EndSection
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the xorg.conf man page for a description of the options.
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Monitor section
# Any number of monitor sections may be present
Section "Monitor"
Identifier "My Monitor"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 31.5, 35.15, 35.5
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50-70
EndSection
# Graphics device section
# Any number of graphics device sections may be present
# Standard VGA Device:
#Section "Device"
# Identifier "Standard VGA"
# VendorName "Unknown"
# BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
## Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
#EndSection
# Device configured by xorgconfig:
Section "Device"
Identifier "** ATI Radeon (generic) [radeon]"
Driver "radeon"
Option "DynamicClocks" "on"
Option "AGPMode" "4"
Option "RenderAccel" "on"
Option "EnablePageFlip" "on"
Option "BIOSHotkeys" "on"
#VideoRam 65536
# Insert Clocks lines here if appropriate
EndSection
# Screen sections
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "** ATI Radeon (generic) [radeon]"
Monitor "My Monitor"
DefaultDepth 24
Subsection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection
# ServerLayout sections.
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
InputDevice "SynapticsMouse1" "AlwaysCore"
EndSection
# Section "DRI"
# InputDevice "SynapticsMouse1" "AlwaysCore"
# Mode 0666
# EndSection
and the Xorg.0.log
X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.27-ARCH i686
Current Operating System: Linux t40 2.6.28-ARCH #1 SMP PREEMPT Tue Jan 6 10:26:22 UTC 2009 i686
Build Date: 17 December 2008 08:20:05PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Jan 12 13:04:51 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "My Monitor"
(**) | |-->Device "** ATI Radeon (generic) [radeon]"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) |-->Input Device "SynapticsMouse1"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd' or 'mouse' will be disabled.
(WW) Disabling Mouse1
(WW) Disabling Keyboard1
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81d5fe0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 4.1
X.Org XInput driver : 2.1
X.Org Server Extension : 1.1
X.Org Font Renderer : 0.6
(II) Loader running on linux
(--) using VT number 7
(--) PCI:*(0@1:0:0) ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobility 7500] rev 0, Mem @ 0xe0000000/0, 0xc0100000/0, I/O @ 0x00003000/0, BIOS @ 0x????????/131072
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded by default.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.5.3, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(==) AIGLX enabled
(==) Exporting typical set of GLX visuals
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers//radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 6.9.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 4.1
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 0.99.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.1
(II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI FirePro V8750 (FireGL),
ATI FirePro V7760 (FireGL), ATI Mobility RADEON HD 4850,
ATI Mobility RADEON HD 4850 X2, ATI Radeon 4800 Series,
ATI FirePro RV770, AMD FireStream 9270, AMD FireStream 9250,
ATI FirePro V8700 (FireGL), ATI Mobility RADEON HD 4870,
ATI Mobility RADEON M98, ATI Radeon RV730 (AGP),
ATI Radeon RV730 (AGP), ATI RV730XT [Radeon HD 4670],
ATI RV730 PRO [Radeon HD 4650], ATI FirePro V7750 (FireGL),
ATI FirePro V5700 (FireGL), ATI FirePro V3750 (FireGL), ATI RV610,
ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro,
ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI RV610,
ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610, ATI RV670,
ATI Radeon HD3870, ATI Radeon HD3850, ATI RV670,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD 4550, ATI Radeon RV710, ATI Radeon RV710,
ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
ATI Mobility Radeon 4500 Series, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE, ATI Radeon RV710,
ATI Radeon HD 3470, ATI Mobility Radeon HD 3430,
ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450,
ATI Radeon HD 3430, ATI FireMV 2450, ATI FireMV 2260,
ATI FireMV 2260, ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
ATI Radeon HD 3600 PRO, ATI Mobility Radeon HD 3650,
ATI Mobility Radeon HD 3670, ATI Radeon HD 3200 Graphics,
ATI Radeon 3100 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics
(II) Primary Device is: PCI 01@00:00:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) RADEON(0): TOTO SAYS 00000000c0100000
(II) RADEON(0): MMIO registers at 0x00000000c0100000: size 64KB
(II) RADEON(0): PCI bus 1 card 0 func 0
(**) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(**) RADEON(0): Option "AGPMode" "4"
(**) RADEON(0): Option "EnablePageFlip" "on"
(**) RADEON(0): Option "RenderAccel" "on"
(**) RADEON(0): Option "DynamicClocks" "on"
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 0.1.0
ABI class: X.Org Video Driver, version 4.1
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(--) RADEON(0): Chipset: "ATI Radeon Mobility M7 LW (AGP)" (ChipID = 0x4c57)
(--) RADEON(0): Linear framebuffer at 0x00000000e0000000
(II) RADEON(0): AGP card detected
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Video Driver, version 4.1
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(II) RADEON(0): Legacy BIOS detected
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.29.0
(**) RADEON(0): Page Flipping enabled
(II) RADEON(0): Will try to use DMA for Xv image transfers
(II) RADEON(0): Detected total video RAM=32768K, accessible=65536K (PCI BAR=131072K)
(--) RADEON(0): Mapped VideoRAM: 32768 kByte (64 bit DDR SDRAM)
(II) RADEON(0): Color tiling enabled by default
(II) RADEON(0): Max desktop size set to 2048x1200
(II) RADEON(0): For a larger or smaller max desktop size, add a Virtual line to your xorg.conf
(II) RADEON(0): If you are having trouble with 3D, reduce the desktop size by adjusting the Virtual line to your xorg.conf
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEON(0): ref_freq: 2700, min_out_pll: 12000, max_out_pll: 35000, min_in_pll: 40, max_in_pll: 3000, xclk: 18300, sclk: 183.000000, mclk: 260.000000
(II) RADEON(0): PLL parameters: rf=2700 rd=12 min=12000 max=35000; xclk=18300
(II) RADEON(0): Bios Connector table:
(II) RADEON(0): Port0: DDCType-0x60, DACType-1, TMDSType-1, ConnectorType-1
(II) RADEON(0): Port1: DDCType-0x64, DACType-2, TMDSType-1, ConnectorType-3
(II) RADEON(0): Port4: DDCType-0x0, DACType-0, TMDSType-0, ConnectorType-7
(II) RADEON(0): Port5: DDCType-0x0, DACType-2, TMDSType-0, ConnectorType-5
(II) RADEON(0): Output VGA-0 using monitor section My Monitor
(II) RADEON(0): I2C bus "VGA-0" initialized.
(II) RADEON(0): Output DVI-0 has no monitor section
(II) RADEON(0): DFP table revision: 2
(II) RADEON(0): I2C bus "DVI-0" initialized.
(II) RADEON(0): Output LVDS has no monitor section
(II) RADEON(0): Panel ID string: 1024x768
(II) RADEON(0): Panel Size from BIOS: 1024x768
(II) RADEON(0): BIOS provided dividers will be used.
(WW) RADEON(0): LVDS Info:
XRes: 1024, YRes: 768, DotClock: 65000
HBlank: 320, HOverPlus: 16, HSyncWidth: 136
VBlank: 38, VOverPlus: 2, VSyncWidth: 6
(II) RADEON(0): Output S-video has no monitor section
(II) RADEON(0): Default TV standard: NTSC
(II) RADEON(0): TV standards supported by chip: NTSC PAL NTSC-J
(II) RADEON(0): Port0:
Monitor -- AUTO
Connector -- VGA
DAC Type -- Primary
TMDS Type -- None
DDC Type -- 0x60
(II) RADEON(0): Port1:
Monitor -- AUTO
Connector -- DVI-D
DAC Type -- None
TMDS Type -- Internal
DDC Type -- 0x64
(II) RADEON(0): Port2:
Monitor -- AUTO
Connector -- LVDS
DAC Type -- None
TMDS Type -- None
DDC Type -- 0x0
(II) RADEON(0): Port3:
Monitor -- AUTO
Connector -- STV
DAC Type -- TVDAC/ExtDAC
TMDS Type -- None
DDC Type -- 0x0
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
finished output detect: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
finished output detect: 1
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
finished output detect: 2
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
finished output detect: 3
finished all detect
before xf86InitialConfiguration
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
in RADEONProbeOutputModes
(II) RADEON(0): Added native panel mode: 1024x768
(WW) RADEON(0): Mode 1280x1024 is out of range.
(WW) RADEON(0): Valid FP modes must be between 320x200-1024x768
(II) RADEON(0): Adding Screen mode: 800x600
(II) RADEON(0): Adding Screen mode: 640x480
(II) RADEON(0): Total number of valid Screen mode(s) added: 2
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
(II) RADEON(0): Output VGA-0 disconnected
(II) RADEON(0): Output DVI-0 disconnected
(II) RADEON(0): Output LVDS connected
(II) RADEON(0): Output S-video disconnected
(II) RADEON(0): Using exact sizes for initial modes
(II) RADEON(0): Output LVDS using initial mode 1024x768
after xf86InitialConfiguration
(==) RADEON(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) RADEON(0): Using XAA acceleration architecture
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.2.1
ABI class: X.Org Video Driver, version 4.1
(==) RADEON(0): Assuming overlay scaler buffer width is 1536
(II) RADEON(0): No MM_TABLE found - assuming CARD is not TV-in capable.
(!!) RADEON(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) RADEON(0): RADEONScreenInit e0000000 0 0
Entering TV Save
Save TV timing tables
saveTimingTables: reading timing tables
TV Save done
(II) RADEON(0): Dynamic Clock Scaling Enabled
(==) RADEON(0): Using 24 bit depth buffer
(II) RADEON(0): RADEONInitMemoryMap() :
(II) RADEON(0): mem_size : 0x04000000
(II) RADEON(0): MC_FB_LOCATION : 0xe3ffe000
(II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
(II) RADEON(0): Depth moves disabled by default
(II) RADEON(0): Using 8 MB GART aperture
(II) RADEON(0): Using 1 MB for the ring buffer
(II) RADEON(0): Using 2 MB for vertex/indirect buffers
(II) RADEON(0): Using 5 MB for GART textures
(II) RADEON(0): Memory manager initialized to (0,0) (1024,8191)
(II) RADEON(0): Reserved area from (0,1024) to (1024,1026)
(II) RADEON(0): Largest offscreen area available: 1024 x 7165
(II) RADEON(0): Will use front buffer at offset 0x0
(II) RADEON(0): Will use back buffer at offset 0x800000
(II) RADEON(0): Will use depth buffer at offset 0xc00000
(II) RADEON(0): Will use 16384 kb for textures at offset 0x1000000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
(II) RADEON(0): [drm] framebuffer handle = 0xe0000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): X context handle = 0x1
(II) RADEON(0): [drm] installed DRM signal handler
(**) RADEON(0): Using AGP 4x
(II) RADEON(0): [agp] Mode 0x1f000207 [AGP 0x8086/0x3340; Card 0x1002/0x4c57]
(II) RADEON(0): [agp] 8192 kB allocated with handle 0x00000001
(II) RADEON(0): [agp] ring handle = 0xd0000000
(II) RADEON(0): [agp] Ring mapped at 0xb5856000
(II) RADEON(0): [agp] ring read ptr handle = 0xd0101000
(II) RADEON(0): [agp] Ring read ptr mapped at 0xb803d000
(II) RADEON(0): [agp] vertex/indirect buffers handle = 0xd0102000
(II) RADEON(0): [agp] Vertex/indirect buffers mapped at 0xb5656000
(II) RADEON(0): [agp] GART texture map handle = 0xd0302000
(II) RADEON(0): [agp] GART Texture map mapped at 0xb5176000
(II) RADEON(0): [drm] register handle = 0xc0100000
(II) RADEON(0): [dri] Visual configs initialized
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xe3ffe000 0x1fff0000
(II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
(==) RADEON(0): Backing store disabled
(II) RADEON(0): [DRI] installation complete
(II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEON(0): [drm] dma control initialized, using IRQ 11
(II) RADEON(0): [drm] Initialized kernel GART heap manager, 5111808
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0): MC_FB_LOCATION was: 0xe3ffe000 is: 0xe3ffe000
(WW) RADEON(0): MC_AGP_LOCATION was: 0xffffffc0 is: 0xd07fd000
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xe3ffe000 0xe3ffe000
(II) RADEON(0): MC_AGP_LOCATION : 0xd07fd000
(II) RADEON(0): Direct rendering enabled
(II) RADEON(0): Render acceleration enabled
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Scanline Image Writes
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(II) RADEON(0): Acceleration enabled
(II) RADEON(0): DPMS enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x00402000
(II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x00406000
(II) RADEON(0): Largest offscreen area available: 1024 x 7157
(II) RADEON(0): Detected Radeon Mobility M7, disabling multimedia i2c
(II) Loading sub module "theatre_detect"
(II) LoadModule: "theatre_detect"
(II) Loading /usr/lib/xorg/modules/multimedia//theatre_detect_drv.so
(II) Module theatre_detect: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Video Driver, version 4.1
(II) RADEON(0): no multimedia table present, disabling Rage Theatre.
(II) RADEON(0): Set up overlay video
(II) RADEON(0): Set up textured video
init memmap
init common
init crtc1
init pll1
restore memmap
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xe3ffe000 0xe3ffe000
(II) RADEON(0): MC_AGP_LOCATION : 0xd07fd000
restore common
restore crtc1
restore pll1
restore LVDS
(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(WW) RADEON(0): Option "BIOSHotkeys" is not used
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/radeon_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) RADEON(0): Setting screen physical size to 270 x 203
(II) Synaptics touchpad driver version 0.99.3
(--) SynapticsMouse1 auto-dev sets device to /dev/input/event8
(**) Option "Device" "/dev/input/event8"
(II) SynapticsMouse1: x-axis range 1472 - 5472
(II) SynapticsMouse1: y-axis range 1408 - 4448
(II) SynapticsMouse1: pressure range 0 - 255
(II) SynapticsMouse1: finger width range 0 - 0
(II) SynapticsMouse1: buttons: left right middle double triple
(**) Option "SHMConfig" "on"
(**) Option "LeftEdge" "1700"
(**) Option "RightEdge" "5300"
(**) Option "TopEdge" "1700"
(**) Option "BottomEdge" "4200"
(**) Option "FingerLow" "25"
(**) Option "FingerHigh" "30"
(**) Option "MaxTapTime" "180"
(**) Option "MaxTapMove" "220"
(**) Option "VertScrollDelta" "100"
(--) SynapticsMouse1 touchpad found
(**) Option "AlwaysCore"
(**) SynapticsMouse1: always reports core events
(II) evaluating device (SynapticsMouse1)
(II) XINPUT: Adding extended input device "SynapticsMouse1" (type: TOUCHPAD)
(--) SynapticsMouse1 touchpad found
(II) RADEON(0): Damage tracking initialized for page flipping
(EE) config/hal: couldn't initialise context: (null) ((null))
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
in RADEONProbeOutputModes
(II) RADEON(0): Added native panel mode: 1024x768
(WW) RADEON(0): Mode 1280x1024 is out of range.
(WW) RADEON(0): Valid FP modes must be between 320x200-1024x768
(II) RADEON(0): Adding Screen mode: 800x600
(II) RADEON(0): Adding Screen mode: 640x480
(II) RADEON(0): Total number of valid Screen mode(s) added: 2
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
in RADEONProbeOutputModes
(II) RADEON(0): Added native panel mode: 1024x768
(WW) RADEON(0): Mode 1280x1024 is out of range.
(WW) RADEON(0): Valid FP modes must be between 320x200-1024x768
(II) RADEON(0): Adding Screen mode: 800x600
(II) RADEON(0): Adding Screen mode: 640x480
(II) RADEON(0): Total number of valid Screen mode(s) added: 2
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
in RADEONProbeOutputModes
(II) RADEON(0): Added native panel mode: 1024x768
(WW) RADEON(0): Mode 1280x1024 is out of range.
(WW) RADEON(0): Valid FP modes must be between 320x200-1024x768
(II) RADEON(0): Adding Screen mode: 800x600
(II) RADEON(0): Adding Screen mode: 640x480
(II) RADEON(0): Total number of valid Screen mode(s) added: 2
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
in RADEONProbeOutputModes
(II) RADEON(0): Added native panel mode: 1024x768
(WW) RADEON(0): Mode 1280x1024 is out of range.
(WW) RADEON(0): Valid FP modes must be between 320x200-1024x768
(II) RADEON(0): Adding Screen mode: 800x600
(II) RADEON(0): Adding Screen mode: 640x480
(II) RADEON(0): Total number of valid Screen mode(s) added: 2
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
(II) UnloadModule: "synaptics"
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0x1fff0000 0xe3ffe000
(II) RADEON(0): MC_AGP_LOCATION : 0x27ff2000
finished PLL2
Entering Restore TV
Restore TV PLL
Restore TVHV
Restore TV Restarts
Restore Timing Tables
Restore TV standard
Leaving Restore TV
(II) RADEON(0): [drm] removed 1 reserved context for kernel
(II) RADEON(0): [drm] unmapping 8192 bytes of SAREA 0xf8046000 at 0xb803e000
(II) RADEON(0): [drm] Closed DRM master.
Last edited by eg4matze (2009-01-12 12:47:16)

hal couldnt start, I rebuild it with abs, now everything works

IMac G5 (Rev. A) can't connect to AirPort Express

We have 2 Macintosh computers at home; one Mac mini G4 1.42GHz (model M9687LL/B) with built in AirPort Extreme card; and one iMac G5 (Rev. A) 1.6 GHz (model M9363LL/A) also with an AirPort Extreme card.
The mini was bought new, while the iMac was used when we bought it. When we bought it, the company (who were selling old Macitosh computers previously rented to other companies) installed and additional 512 MB of RAM (on top of the 256MB already in it) as well as the AirPort Extreme card. We then upgraded the OS from 10.3.9 Panther to 10.4.4 Tiger. Then we used a FireWire cable to copy the harddrive of my dads work computer (iMac G4) to the new one. We then took it home.
At home we had a linksys wireless router (model BEFW11S4) which we used to connect to the internet. Connected to this wireless network was an AirPort Express unit which we used to stream music to the downstairs stereo. However, the linksys router caused many problems, one of them being that everytime we started a computer, the router needed to be restarted to be able to send a signal so we could connect to the internet.
Eventually, we got feed up with this, and took the AirPort Express unit upstairs and replaced the linksys with it. We installed it, and it worked fine. Upstairs (location of Mac mini, the signal strength was always 4 or 3 (the little icon in the menu bar), but downstairs (where the iMac's located), the signal stayed at about 3, or sometimes 2.
After about a week, the downstairs signaled started to be more 2 than 3, but this made no real difference to us, since it still worked. Then, yesterday, it went down to 1, but still worked. Then, today, it stayed at 1, then totally disconnected. When we click the symbol in the menu bar, we can press on the wireless network to tell the computer to connect to it, but it only comes up with a box saying that the computer could not connect to it.
We have tried more or less everything to get it to work. Turning on and off the AirPort Extreme card in the computer, updating the AirPort Express firmware, restarted computers, the whole lot! But it still wont work!
My dad has borrowed an old iBook with a G3 800MHz processor running 10.3.9 Panther. The iBook has an AirPort card in it (not AirPort Extreme), but even downstairs, it gets full (or sometimes 3) connection. I even tried the basement, and it still works!
So my question is, why won't the iMac even connect to the network? Any help is greatly appreciated!
iMac G5, 1.6GHz, 768MB, AirPort Express Mac OS X (10.4.4)

I'm having a very similar problem with my iMac. I moved the airport down to the basement last week. Reception was at 3, but droped quickly to 2 and 1 and eventually the iMac lost the connection to the airport.
I brought the airport back to the office where the iMac is located and where the airport used to be, but I was unable to join the network again, even though the signal was received by the computer. I downloaded a widget for the dashboard that showed full strength of the signal.
While having these problems with the iMac, I don't have any problems connecting with my iBook to the network. Since I was able to connect to the airport via the iBook, I changed some of the settings, but nothing really helped except disabling wireless security. Agter that I was able to connect to the network via the iMac again, but only for a couple of minutes until the network disappeared again.
I'm reading about lots of other people having problems with the airport recently. So I suspect that this has to do with the recent OS X update. Hopefully somebody at Apple is looking at this problem right now!

[SOLVED] How do I disable enp0s3?

I am trying to remove unwanted services from boot, specifically enp0s3 which I don't use as I don't have a ethernet card.
This is my start up time analysis:
$ systemd-analyze blame
24.503s [email protected]
1.625s systemd-logind.service
1.580s alsa-restore.service
1.579s iptables.service
684ms updatedb.service
626ms man-db.service
375ms systemd-journal-flush.service
62ms systemd-journald.service
53ms systemd-udevd.service
From the journal I see this - Timed out waiting for device sys-subsystem-net-devices-enp0s3.device.
Jan 19 10:30:51 arch network[273]: Starting network profile 'fisher'...
Jan 19 10:30:51 arch systemd-logind[223]: Watching system buttons on /dev/input/event3 (Power Button)
Jan 19 10:30:51 arch systemd-logind[223]: Watching system buttons on /dev/input/event6 (Video Bus)
Jan 19 10:30:51 arch kernel: random: nonblocking pool is initialized
Jan 19 10:30:51 arch kernel: b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
Jan 19 10:30:52 arch kernel: IPv6: ADDRCONF(NETDEV_UP): wlp3s0b1: link is not ready
Jan 19 10:30:52 arch systemd[1]: Started Update man-db cache.
Jan 19 10:30:52 arch systemd[1]: Started Update locate database.
Jan 19 10:30:53 arch kernel: wlp3s0b1: authenticate with 00:25:15:1d:7b:34
Jan 19 10:30:53 arch kernel: wlp3s0b1: direct probe to 00:25:15:1d:7b:34 (try 1/3)
Jan 19 10:30:53 arch kernel: wlp3s0b1: send auth to 00:25:15:1d:7b:34 (try 2/3)
Jan 19 10:30:53 arch kernel: wlp3s0b1: authenticated
Jan 19 10:30:53 arch kernel: wlp3s0b1: associate with 00:25:15:1d:7b:34 (try 1/3)
Jan 19 10:30:53 arch kernel: wlp3s0b1: RX AssocResp from 00:25:15:1d:7b:34 (capab=0x411 status=0 aid=1)
Jan 19 10:30:53 arch kernel: wlp3s0b1: associated
Jan 19 10:30:53 arch kernel: IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0b1: link becomes ready
Jan 19 10:30:53 arch dhcpcd[390]: version 6.6.7 starting
Jan 19 10:30:53 arch dhcpcd[390]: DUID 00:01:00:01:1c:0d:93:4d:08:00:27:34:83:28
Jan 19 10:30:53 arch dhcpcd[390]: wlp3s0b1: IAID 96:d0:29:ff
Jan 19 10:30:53 arch dhcpcd[390]: wlp3s0b1: rebinding lease of 192.168.1.65
Jan 19 10:30:58 arch dhcpcd[390]: wlp3s0b1: DHCP lease expired
Jan 19 10:30:59 arch dhcpcd[390]: wlp3s0b1: soliciting a DHCP lease
Jan 19 10:31:10 arch dhcpcd[390]: wlp3s0b1: offered 192.168.1.65 from 192.168.1.1
Jan 19 10:31:16 arch dhcpcd[390]: wlp3s0b1: leased 192.168.1.65 for 86400 seconds
Jan 19 10:31:16 arch dhcpcd[390]: wlp3s0b1: adding route to 192.168.1.0/24
Jan 19 10:31:16 arch dhcpcd[390]: wlp3s0b1: adding default route via 192.168.1.1
Jan 19 10:31:16 arch dhcpcd[390]: forked to background, child pid 468
Jan 19 10:31:16 arch network[273]: Started network profile 'fisher'
Jan 19 10:31:16 arch systemd[1]: Started A simple WPA encrypted wireless connection.
Jan 19 10:32:19 arch systemd[1]: Job sys-subsystem-net-devices-enp0s3.device/start timed out.
Jan 19 10:32:19 arch systemd[1]: Timed out waiting for device sys-subsystem-net-devices-enp0s3.device.
Jan 19 10:32:19 arch systemd[1]: Dependency failed for dhcpcd on enp0s3.
Jan 19 10:32:19 arch systemd[1]: Job [email protected]/start failed with result 'dependency'.
Jan 19 10:32:19 arch systemd[1]: Job sys-subsystem-net-devices-enp0s3.device/start failed with result 'timeout'.
Jan 19 10:32:19 arch systemd[1]: Starting Network.
Jan 19 10:32:19 arch systemd[1]: Reached target Network.
Jan 19 10:32:19 arch systemd[1]: Starting OpenSSH Daemon...
Jan 19 10:32:19 arch systemd[1]: Started OpenSSH Daemon.
Jan 19 10:32:19 arch systemd[1]: Starting Multi-User System.
Jan 19 10:32:19 arch systemd[1]: Reached target Multi-User System.
Jan 19 10:32:19 arch systemd[1]: Starting Graphical Interface.
Jan 19 10:32:19 arch systemd[1]: Reached target Graphical Interface.
Jan 19 10:32:19 arch systemd[1]: Startup finished in 1.025s (kernel) + 1min 30.574s (userspace) = 1min 31.599s.
As I don't have ethernet can I turn it off? I saw this https://bbs.archlinux.org/viewtopic.php?id=158885 which is almost the opposite of my issue so I tried
systemctl disable dhcpcd
(I'm unsure if that is wise or even relevant) but still the device is trying to start and I don't know why
$ systemctl status dhcpcd
● dhcpcd.service - dhcpcd on all interfaces
Loaded: loaded (/usr/lib/systemd/system/dhcpcd.service; disabled; vendor preset: disabled)
Active: inactive (dead)
[adam@arch rules.d]$
$ systemctl status sys-subsystem-net-devices-enp0s3.device
● sys-subsystem-net-devices-enp0s3.device
Loaded: loaded
Active: inactive (dead)
Jan 19 10:32:19 arch systemd[1]: Job sys-subsystem-net-devices-enp0s3.device/start timed out.
Jan 19 10:32:19 arch systemd[1]: Timed out waiting for device sys-subsystem-net-devices-enp0s3.device.
Jan 19 10:32:19 arch systemd[1]: Job sys-subsystem-net-devices-enp0s3.device/start failed with result 'timeout'.
Last edited by halasz (2015-01-19 14:35:53)

lsmod | grep tg shows nothing at all (why tg btw? did you mean th for ethernet?).
$ sudo lsmod | grep th
bluetooth 403639 2 btusb
rfkill 18867 3 cfg80211,bluetooth
x86_pkg_temp_thermal 12951 0
thunderbolt 48817 0
crc16 12343 2 ext4,bluetooth
lspci-vv doesn't show kernel modules either for ethernet.
02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM57786 Gigabit Ethernet PCIe (rev 21)
Subsystem: Broadcom Corporation NetXtreme BCM57786 Gigabit Ethernet PCIe
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 0
Region 0: Memory at a0400000 (64-bit, prefetchable) [disabled] [size=64K]
Region 2: Memory at a0410000 (64-bit, prefetchable) [disabled] [size=64K]
Expansion ROM at 8fa00000 [disabled] [size=2K]
Capabilities: [48] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
Product Name: Broadcom NetXtreme Gigabit Ethernet Controller
Read-only fields:
[PN] Part number: BCM957766
[EC] Engineering changes: 106679-15
[SN] Serial number: 0123456789
[MN] Manufacture ID: 31 34 65 34
[RV] Reserved: checksum good, 27 byte(s) reserved
End
Capabilities: [58] MSI: Enable- Count=1/8 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [a0] MSI-X: Enable- Count=5 Masked-
Vector table: BAR=2 offset=00000000
PBA: BAR=2 offset=00000120
Capabilities: [ac] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr+ NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <2us, L1 <64us
ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR+, OBFF Not Supported
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [13c v1] Device Serial Number 00-00-00-10-18-00-00-00
Capabilities: [150 v1] Power Budgeting <?>
Capabilities: [160 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Capabilities: [1b0 v1] Latency Tolerance Reporting
Max snoop latency: 0ns
Max no snoop latency: 0ns
02:00.1 SD Host controller: Broadcom Corporation BCM57765/57785 SDXC/MMC Card Reader (rev 21) (prog-if 01)
It does for other things. In fact ethernet is the only thing on lspci that *doesn't* have an associated Kernel Driver or Module.
sudo lspci -k
00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
Subsystem: Apple Inc. Device 0102
Kernel driver in use: ivb_uncore
libkmod: kmod_config_parse: /etc/modprobe.d/xhci-reset-on-suspend.conf line 1: ignoring bad line starting with '#'
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:01.1 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
Subsystem: Apple Inc. Device 0102
Kernel driver in use: i915
Kernel modules: i915
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
Subsystem: Intel Corporation Device 7270
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
Subsystem: Intel Corporation Device 7270
Kernel driver in use: mei_me
Kernel modules: mei_me
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
Subsystem: Intel Corporation Device 7270
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
Subsystem: Intel Corporation Device 7270
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
Subsystem: Intel Corporation Device 7270
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1f.0 ISA bridge: Intel Corporation QS77 Express Chipset LPC Controller (rev 04)
Subsystem: Intel Corporation Device 7270
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
Subsystem: Intel Corporation Device 7270
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
Subsystem: Intel Corporation Device 7270
Kernel modules: i2c_i801
02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM57786 Gigabit Ethernet PCIe (rev 21)
Subsystem: Broadcom Corporation NetXtreme BCM57786 Gigabit Ethernet PCIe
02:00.1 SD Host controller: Broadcom Corporation BCM57765/57785 SDXC/MMC Card Reader (rev 21)
Subsystem: Broadcom Corporation Device 96bc
Kernel driver in use: sdhci-pci
Kernel modules: sdhci_pci
03:00.0 Network controller: Broadcom Corporation BCM4331 802.11a/b/g/n (rev 02)
Subsystem: Apple Inc. AirPort Extreme
Kernel driver in use: bcma-pci-bridge
Kernel modules: bcma
04:00.0 PCI bridge: Intel Corporation DSL3510 Thunderbolt Port [Cactus Ridge] (rev 03)
Kernel driver in use: pcieport
Kernel modules: shpchp
05:00.0 PCI bridge: Intel Corporation DSL3510 Thunderbolt Port [Cactus Ridge] (rev 03)
Kernel driver in use: pcieport
Kernel modules: shpchp
05:03.0 PCI bridge: Intel Corporation DSL3510 Thunderbolt Port [Cactus Ridge] (rev 03)
Kernel driver in use: pcieport
Kernel modules: shpchp
05:04.0 PCI bridge: Intel Corporation DSL3510 Thunderbolt Port [Cactus Ridge] (rev 03)
Kernel driver in use: pcieport
Kernel modules: shpchp
05:05.0 PCI bridge: Intel Corporation DSL3510 Thunderbolt Port [Cactus Ridge] (rev 03)
Kernel driver in use: pcieport
Kernel modules: shpchp
05:06.0 PCI bridge: Intel Corporation DSL3510 Thunderbolt Port [Cactus Ridge] (rev 03)
Kernel driver in use: pcieport
Kernel modules: shpchp
06:00.0 System peripheral: Intel Corporation DSL3510 Thunderbolt Port [Cactus Ridge] (rev 03)
Subsystem: Device 2222:1111
Kernel driver in use: thunderbolt
Kernel modules: thunderbolt
I don't have a bios (have a macbook) - I am booting EFI. I could pass a kernel parameter but it is same issue - I need to know what module to disable. Or how to disable the driver.
Last edited by halasz (2015-01-19 13:35:42)

How can I disable an attached accessory on the phone?

I have a iPhone 4 running iOS 5.0.1. I have a few different "accessories" that I use to charge my phone (Ford Sync, bedside speaker doc, etc). I often use the audio playback functionality of these accessories which disables my ability to use the ipod/Music app. However, I sometimes only want to use the accessory to charge the iphone without disabling my ability to use the ipod/Music app. This is something I wanted to do before iOS 5, but with the addition of the iCloud and iTunes Match I am finding that many accessories (especially Ford Sync) are not able to smoothly support playing audio from the cloud. I want the ability to have the accessory continue to charge my phone, but allow me to use the Music app so that I can listen to music output via the audio jack to headphones or another external speaker. Is there a way for me to do this? Jailbreaking is not an option - I do not want to do this.

I guess there is no way to do this? If not it is a terrible shame.

Ipod Touch (2nd gen) drawing too much power, disable USB?

Earlier today, when my iPod Touch (2nd gen) was syncing with iTunes, it disconnected and this error message popped up:
Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled.
To prevent damaging your computer, the USB device darwing too much power has been disabled. When you disconnect the device drawing to much power, your other USB devices will be enabled again.
Now, my Ipod will not sync or charge. I've tried connecting other USB devices (cell phone, wireless mouse and ehd) and get the same message. I've tried a few suggestions online like: restarting/shutting down the computer, restarting the IPod, resetting the SMC, PRAM and NVRAM. None of these worked. I've connected my iPod to my roommate's iMac and it connected with no problem. Is there anything else I can do before using the Genius bar?
Macbook Pro 5,3
Intel core duo
4gb memory
ipod touch 2nd gen
firmware 4.2.1

You have a MacBook problem since it happens with all your USB accessories. I suggest you post in the MacBook forum. I do not have a MacBook so I have no ideal about the problem.

[SOLVED] Bumblebee/bbswitch Not Disabling Nvidia Card

Hello all. I've been able to resolve a wide variety of problems by searching through the posts here, but it seems I've come up empty on this one.
I'm running Arch on a Sager NP5160 (Clevo W150HN), i7-2630 QM, 8 GB RAM, running Optimus with an Nvidia GT 540M Optimus setup.
I've had Bumblebee and bbswitch running fine in the past, but recently I needed to reinstall Arch (my own fault).
I installed bumblebee and bbswitch again, as described on the wiki.
However, once everything is installed and configured, bbswitch is still unable to deactivate my Nvidia card.
I'm using the proprietary Nvidia driver.
I have verified that bumblebee.conf has the driver set to Nvidia (not nouveau), and uses bbswitch.
I have also tried blacklisting both nouveau and nvidia, as well as adding bbswitch to the modules section of my mkinitcpio.conf file (and regenerating the initramfs).
A curious point that I have noted is that the Nvidia card is disabled during boot, and up until I login.
Once my information loads, the Nvidia card is activated and I cannot deactivate it, even manually.
Here is the dmesg output when I run glxspheres64 using bumblebee:
[ 777.827743] [drm] Module unloaded
[ 777.829410] bbswitch: disabling discrete graphics
[ 777.829423] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
[ 777.842135] pci 0000:01:00.0: Refused to change power state, currently in D0
[ 778.625647] nvidia 0000:01:00.0: enabling device (0006 -> 0007)
[ 778.625799] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=none,decodes=none:owns=none
[ 778.626884] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 1
[ 778.626906] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 346.35 Sat Jan 10 21:27:15 PST 2015
[ 778.629748] nvidia 0000:01:00.0: irq 38 for MSI/MSI-X
[ 778.635579] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
[ 778.635666] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
[ 778.635703] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
[ 778.635734] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
[ 778.635762] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
[ 778.635790] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
[ 778.636064] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
[ 778.636096] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
[ 782.694911] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
Part of my systemd journal from a recent boot:
Feb 04 15:26:04 gondolin acpid[322]: client connected from 6944[0:997]
Feb 04 15:26:04 gondolin acpid[322]: 1 client rule loaded
Feb 04 15:26:05 gondolin bumblebeed[320]: [ 368.404917] [WARN][XORG] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
Feb 04 15:26:05 gondolin bumblebeed[320]: [ 368.404963] [WARN][XORG] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
Feb 04 15:26:05 gondolin bumblebeed[320]: [ 368.404979] [ERROR][XORG] (EE) systemd-logind: failed to get session: PID 6944 does not belong to any known session
Feb 04 15:26:05 gondolin bumblebeed[320]: [ 368.404989] [ERROR][XORG] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied
Feb 04 15:26:05 gondolin bumblebeed[320]: [ 368.405031] [WARN][XORG] (WW) NVIDIA(0): Unable to get display device for DPI computation.
Feb 04 15:26:05 gondolin bumblebeed[320]: [ 368.405056] [ERROR][XORG] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied
Feb 04 15:26:08 gondolin logger[6979]: ACPI group/action undefined: thermal_zone / LNXTHERM:00
Feb 04 15:26:12 gondolin kernel: [drm] Module unloaded
Feb 04 15:26:12 gondolin kernel: bbswitch: disabling discrete graphics
Feb 04 15:26:12 gondolin kernel: ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
Feb 04 15:26:12 gondolin kernel: pci 0000:01:00.0: Refused to change power state, currently in D0
Feb 04 15:26:12 gondolin bumblebeed[320]: [ 375.273427] [ERROR][XORG] (EE) Server terminated successfully (0). Closing log file.
Feb 04 15:26:12 gondolin acpid[322]: client 6944[0:997] has disconnected
Feb 04 15:26:12 gondolin acpid[322]: client 6944[0:997] has disconnected
Feb 04 15:26:12 gondolin kernel: nvidia 0000:01:00.0: enabling device (0006 -> 0007)
Feb 04 15:26:12 gondolin kernel: vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=none,decodes=none:owns=none
Feb 04 15:26:12 gondolin kernel: [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 1
Feb 04 15:26:12 gondolin kernel: NVRM: loading NVIDIA UNIX x86_64 Kernel Module 346.35 Sat Jan 10 21:27:15 PST 2015
Feb 04 15:26:12 gondolin kernel: nvidia 0000:01:00.0: irq 38 for MSI/MSI-X
Feb 04 15:26:12 gondolin kernel: ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
Feb 04 15:26:12 gondolin kernel: ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
Feb 04 15:26:12 gondolin kernel: ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
Feb 04 15:26:12 gondolin kernel: ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
Feb 04 15:26:12 gondolin kernel: ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
Feb 04 15:26:12 gondolin kernel: ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
Feb 04 15:26:12 gondolin kernel: ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
Feb 04 15:26:12 gondolin kernel: ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
Feb 04 15:26:12 gondolin logger[6997]: ACPI group/action undefined: PNP0C14:00 / 000000d0
Finally, the Xorg.8.log:
X.Org X Server 1.16.3
Release Date: 2014-12-20
[ 366.573] X Protocol Version 11, Revision 0
[ 366.573] Build Operating System: Linux 3.18.1-1-ARCH x86_64
[ 366.573] Current Operating System: Linux gondolin 3.18.5-1-ARCH #1 SMP PREEMPT Fri Jan 30 07:31:50 CET 2015 x86_64
[ 366.573] Kernel command line: initrd=\initramfs-linux.img root=/dev/sda3 rw
[ 366.573] Build Date: 29 December 2014 01:09:58PM
[ 366.573]
[ 366.573] Current version of pixman: 0.32.6
[ 366.573] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 366.573] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 366.573] (==) Log file: "/var/log/Xorg.8.log", Time: Wed Feb 4 15:26:03 2015
[ 366.573] (++) Using config file: "/etc/bumblebee/xorg.conf.nvidia"
[ 366.573] (++) Using config directory: "/etc/bumblebee/xorg.conf.d"
[ 366.573] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 366.574] (==) ServerLayout "Layout0"
[ 366.574] (**) |-->Screen "Default Screen" (0)
[ 366.574] (**) | |-->Monitor "<default monitor>"
[ 366.574] (**) | |-->Device "DiscreteNvidia"
[ 366.574] (==) No monitor specified for screen "Default Screen".
Using a default monitor configuration.
[ 366.574] (**) Option "AutoAddDevices" "false"
[ 366.574] (**) Option "AutoAddGPU" "false"
[ 366.574] (**) Not automatically adding devices
[ 366.574] (==) Automatically enabling devices
[ 366.574] (**) Not automatically adding GPU devices
[ 366.574] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 366.574] Entry deleted from font path.
[ 366.574] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 366.574] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 366.574] Entry deleted from font path.
[ 366.574] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 366.574] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/
[ 366.574] (++) ModulePath set to "/usr/lib/nvidia/xorg/,/usr/lib/xorg/modules"
[ 366.575] (==) |-->Input Device "<default pointer>"
[ 366.575] (==) |-->Input Device "<default keyboard>"
[ 366.575] (==) The core pointer device wasn't specified explicitly in the layout.
Using the default mouse configuration.
[ 366.575] (==) The core keyboard device wasn't specified explicitly in the layout.
Using the default keyboard configuration.
[ 366.575] (II) Loader magic: 0x818d80
[ 366.575] (II) Module ABI versions:
[ 366.575] X.Org ANSI C Emulation: 0.4
[ 366.575] X.Org Video Driver: 18.0
[ 366.575] X.Org XInput driver : 21.0
[ 366.575] X.Org Server Extension : 8.0
[ 366.577] (EE) systemd-logind: failed to get session: PID 6944 does not belong to any known session
[ 366.578] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 366.578] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 366.578] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied
[ 366.581] (--) PCI:*(0:1:0:0) 10de:0df4:1558:5140 rev 161, Mem @ 0xf0000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00005000/128
[ 366.581] (II) Open ACPI successful (/var/run/acpid.socket)
[ 366.581] (II) LoadModule: "glx"
[ 366.581] (II) Loading /usr/lib/nvidia/xorg/modules/extensions/libglx.so
[ 366.599] (II) Module glx: vendor="NVIDIA Corporation"
[ 366.599] compiled for 4.0.2, module version = 1.0.0
[ 366.599] Module class: X.Org Server Extension
[ 366.599] (II) NVIDIA GLX Module 346.35 Sat Jan 10 20:53:39 PST 2015
[ 366.599] (II) LoadModule: "nvidia"
[ 366.599] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 366.600] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 366.600] compiled for 4.0.2, module version = 1.0.0
[ 366.600] Module class: X.Org Video Driver
[ 366.600] (II) LoadModule: "mouse"
[ 366.600] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[ 366.600] (II) Module mouse: vendor="X.Org Foundation"
[ 366.600] compiled for 1.16.0, module version = 1.9.1
[ 366.600] Module class: X.Org XInput Driver
[ 366.600] ABI class: X.Org XInput driver, version 21.0
[ 366.600] (II) LoadModule: "kbd"
[ 366.601] (WW) Warning, couldn't open module kbd
[ 366.601] (II) UnloadModule: "kbd"
[ 366.601] (II) Unloading kbd
[ 366.601] (EE) Failed to load module "kbd" (module does not exist, 0)
[ 366.601] (II) NVIDIA dlloader X Driver 346.35 Sat Jan 10 20:32:18 PST 2015
[ 366.601] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 366.601] (--) using VT number 7
[ 366.601] (II) Loading sub module "fb"
[ 366.601] (II) LoadModule: "fb"
[ 366.601] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 366.601] (II) Module fb: vendor="X.Org Foundation"
[ 366.601] compiled for 1.16.3, module version = 1.0.0
[ 366.601] ABI class: X.Org ANSI C Emulation, version 0.4
[ 366.601] (II) Loading sub module "wfb"
[ 366.601] (II) LoadModule: "wfb"
[ 366.601] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 366.602] (II) Module wfb: vendor="X.Org Foundation"
[ 366.602] compiled for 1.16.3, module version = 1.0.0
[ 366.602] ABI class: X.Org ANSI C Emulation, version 0.4
[ 366.602] (II) Loading sub module "ramdac"
[ 366.602] (II) LoadModule: "ramdac"
[ 366.602] (II) Module "ramdac" already built-in
[ 366.615] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen" for depth/fbbpp 24/32
[ 366.615] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 366.615] (==) NVIDIA(0): RGB weight 888
[ 366.615] (==) NVIDIA(0): Default visual is TrueColor
[ 366.616] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 366.616] (**) NVIDIA(0): Option "NoLogo" "true"
[ 366.616] (**) NVIDIA(0): Option "ProbeAllGpus" "false"
[ 366.616] (**) NVIDIA(0): Option "UseEDID" "false"
[ 366.616] (**) NVIDIA(0): Option "UseDisplayDevice" "none"
[ 366.616] (**) NVIDIA(0): Enabling 2D acceleration
[ 366.616] (**) NVIDIA(0): Ignoring EDIDs
[ 366.616] (**) NVIDIA(0): Option "UseDisplayDevice" set to "none"; enabling NoScanout
[ 366.616] (**) NVIDIA(0): mode
[ 366.964] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
[ 366.965] (II) NVIDIA(0): NVIDIA GPU GeForce GT 540M (GF108) at PCI:1:0:0 (GPU-0)
[ 366.965] (--) NVIDIA(0): Memory: 1048576 kBytes
[ 366.965] (--) NVIDIA(0): VideoBIOS: 70.08.53.00.05
[ 366.965] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 366.965] (--) NVIDIA(0): Valid display device(s) on GeForce GT 540M at PCI:1:0:0
[ 366.965] (--) NVIDIA(0): none
[ 366.966] (II) NVIDIA(0): Validated MetaModes:
[ 366.966] (II) NVIDIA(0): "NULL"
[ 366.966] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[ 366.966] (WW) NVIDIA(0): Unable to get display device for DPI computation.
[ 366.966] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[ 366.966] (--) Depth 24 pixmap format is 32 bpp
[ 366.966] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 366.966] (II) NVIDIA: access.
[ 367.798] (II) NVIDIA(0): Setting mode "NULL"
[ 367.841] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 367.842] (==) NVIDIA(0): Backing store enabled
[ 367.842] (==) NVIDIA(0): Silken mouse enabled
[ 367.842] (==) NVIDIA(0): DPMS enabled
[ 367.842] (II) Loading sub module "dri2"
[ 367.842] (II) LoadModule: "dri2"
[ 367.842] (II) Module "dri2" already built-in
[ 367.842] (II) NVIDIA(0): [DRI2] Setup complete
[ 367.842] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 367.842] (--) RandR disabled
[ 367.852] (II) Initializing extension GLX
[ 367.928] (II) Using input driver 'mouse' for '<default pointer>'
[ 367.928] (**) Option "CorePointer" "on"
[ 367.928] (**) <default pointer>: always reports core events
[ 367.928] (WW) <default pointer>: No Device specified, looking for one...
[ 368.010] (II) <default pointer>: Setting Device option to "/dev/input/mice"
[ 368.010] (--) <default pointer>: Device: "/dev/input/mice"
[ 368.010] (==) <default pointer>: Protocol: "Auto"
[ 368.010] (**) <default pointer>: always reports core events
[ 368.010] (**) Option "Device" "/dev/input/mice"
[ 368.090] (==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
[ 368.090] (**) <default pointer>: ZAxisMapping: buttons 4 and 5
[ 368.090] (**) <default pointer>: Buttons: 9
[ 368.090] (II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE, id 6)
[ 368.090] (**) <default pointer>: (accel) keeping acceleration scheme 1
[ 368.090] (**) <default pointer>: (accel) acceleration profile 0
[ 368.090] (**) <default pointer>: (accel) acceleration factor: 2.000
[ 368.090] (**) <default pointer>: (accel) acceleration threshold: 4
[ 368.090] (II) <default pointer>: Setting mouse protocol to "ExplorerPS/2"
[ 368.384] (II) <default pointer>: ps2EnableDataReporting: succeeded
[ 368.384] (II) LoadModule: "kbd"
[ 368.385] (WW) Warning, couldn't open module kbd
[ 368.385] (II) UnloadModule: "kbd"
[ 368.385] (II) Unloading kbd
[ 368.385] (EE) Failed to load module "kbd" (module does not exist, 0)
[ 368.385] (EE) No input driver matching `kbd'
[ 368.388] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 368.388] (II) AutoAddDevices is off - not adding device.
[ 368.388] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[ 368.388] (II) AutoAddDevices is off - not adding device.
[ 368.389] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 368.389] (II) AutoAddDevices is off - not adding device.
[ 368.389] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 368.389] (II) AutoAddDevices is off - not adding device.
[ 368.390] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 368.390] (II) AutoAddDevices is off - not adding device.
[ 368.390] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 368.390] (II) AutoAddDevices is off - not adding device.
[ 368.391] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 368.391] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 368.391] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied
[ 368.391] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9)
[ 368.392] (II) AutoAddDevices is off - not adding device.
[ 368.392] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event10)
[ 368.392] (II) AutoAddDevices is off - not adding device.
[ 368.392] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event11)
[ 368.392] (II) AutoAddDevices is off - not adding device.
[ 368.393] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event12)
[ 368.393] (II) AutoAddDevices is off - not adding device.
[ 368.394] (II) config/udev: Adding input device Areson USB Device (/dev/input/event7)
[ 368.394] (II) AutoAddDevices is off - not adding device.
[ 368.394] (II) config/udev: Adding input device Areson USB Device (/dev/input/mouse0)
[ 368.394] (II) AutoAddDevices is off - not adding device.
[ 368.395] (II) config/udev: Adding input device BisonCam, NB Pro (/dev/input/event13)
[ 368.395] (II) AutoAddDevices is off - not adding device.
[ 368.395] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[ 368.395] (II) AutoAddDevices is off - not adding device.
[ 368.396] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event14)
[ 368.396] (II) AutoAddDevices is off - not adding device.
[ 368.396] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 368.396] (II) AutoAddDevices is off - not adding device.
[ 368.397] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[ 368.397] (II) AutoAddDevices is off - not adding device.
[ 375.131] (II) UnloadModule: "mouse"
[ 375.153] (II) NVIDIA(GPU-0): Deleting GPU-0
[ 375.154] (EE) Server terminated successfully (0). Closing log file.
I am unsure what else to try.
If there is any other information needed that I have neglected to provide, I will do my best to post it right away.
Thanks in advance for your assistance.
Last edited by StateOfBlind (2015-03-08 13:46:49)

Sorry to bump this, but I've found some more information.
Unfortunately, I'm not sure what to do with it yet.
I've uninstalled and reinstalled the relevant packages outlined in the Bumblebee wiki.
When my laptop boots, the Nvidia card is disabled up until I log in, at which point it appears to be perpetually enabled, unless the Optimus indicator lights are showing incorrectly.
This is the log output I receive when I run optimus glxspheres64:
Mar 02 10:15:03 gondolin kernel: ------------[ cut here ]------------
Mar 02 10:15:03 gondolin kernel: WARNING: CPU: 1 PID: 16254 at fs/proc/generic.c:315 proc_register+0xc8/0x150()
Mar 02 10:15:03 gondolin kernel: proc_dir_entry 'driver/nvidia' already registered
Mar 02 10:15:03 gondolin kernel: Modules linked in: nvidia(PO+) ctr ccm hid_generic usbhid hid bbswitch(O) joydev mousedev uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core v4l2_common videodev media snd_hda_codec_hdmi iTCO_wdt i
Mar 02 10:15:03 gondolin kernel: intel_gtt i2c_algo_bit libata drm_kms_helper xhci_pci ehci_pci scsi_mod drm xhci_hcd atkbd ehci_hcd libps2 sdhci_pci sdhci led_class usbcore mmc_core usb_common i2c_core i8042 serio video button [last unl
Mar 02 10:15:03 gondolin kernel: CPU: 1 PID: 16254 Comm: modprobe Tainted: P W O 3.18.6-1-ARCH #1
Mar 02 10:15:03 gondolin kernel: Hardware name: CLEVO CO. W150HNM/W170HN /W150HNM/W170HN , BIOS HR_2.1.0.128 X64 04/01
Mar 02 10:15:03 gondolin kernel: 0000000000000000 00000000970ffdf0 ffff88021233fb08 ffffffff8154fb74
Mar 02 10:15:03 gondolin kernel: 0000000000000000 ffff88021233fb60 ffff88021233fb48 ffffffff81072c41
Mar 02 10:15:03 gondolin kernel: ffffffff81b11838 ffff880208fdab80 ffff88022e2b15f3 ffff88022e2b1580
Mar 02 10:15:03 gondolin kernel: Call Trace:
Mar 02 10:15:03 gondolin kernel: [<ffffffff8154fb74>] dump_stack+0x4e/0x71
Mar 02 10:15:03 gondolin kernel: [<ffffffff81072c41>] warn_slowpath_common+0x81/0xa0
Mar 02 10:15:03 gondolin kernel: [<ffffffff81072cb5>] warn_slowpath_fmt+0x55/0x70
Mar 02 10:15:03 gondolin kernel: [<ffffffff8123aed4>] ? proc_alloc_inum+0x54/0xe0
Mar 02 10:15:03 gondolin kernel: [<ffffffff8123b028>] proc_register+0xc8/0x150
Mar 02 10:15:03 gondolin kernel: [<ffffffff8123b1b2>] proc_mkdir_data+0x52/0x80
Mar 02 10:15:03 gondolin kernel: [<ffffffff8123b1f3>] proc_mkdir_mode+0x13/0x20
Mar 02 10:15:03 gondolin kernel: [<ffffffffa0c88ffc>] nv_register_procfs+0x5c/0x210 [nvidia]
Mar 02 10:15:03 gondolin kernel: [<ffffffffa178c2e2>] nvidia_init_module+0x2e2/0x7c2 [nvidia]
Mar 02 10:15:03 gondolin kernel: [<ffffffffa178c7d7>] ? nv_drm_init+0x15/0x15 [nvidia]
Mar 02 10:15:03 gondolin kernel: [<ffffffffa178c85d>] nvidia_frontend_init_module+0x86/0x829 [nvidia]
Mar 02 10:15:03 gondolin kernel: [<ffffffff81002148>] do_one_initcall+0xd8/0x210
Mar 02 10:15:03 gondolin kernel: [<ffffffff81196c52>] ? __vunmap+0xa2/0x100
Mar 02 10:15:03 gondolin kernel: [<ffffffff810f6bd6>] load_module+0x1ea6/0x27d0
Mar 02 10:15:03 gondolin kernel: [<ffffffff810f2fb0>] ? store_uevent+0x70/0x70
Mar 02 10:15:03 gondolin kernel: [<ffffffff810f75cd>] SyS_init_module+0xcd/0x120
Mar 02 10:15:03 gondolin kernel: [<ffffffff815556e9>] system_call_fastpath+0x12/0x17
Mar 02 10:15:03 gondolin kernel: ---[ end trace 1a8b41591c71f998 ]---
Mar 02 10:15:03 gondolin kernel: NVRM: This is a 64-bit BAR mapped above 4GB by the system
NVRM: BIOS or the Linux kernel, but the PCI bridge
NVRM: immediately upstream of this GPU does not define
NVRM: a matching prefetchable memory window.
Mar 02 10:15:03 gondolin kernel: NVRM: This may be due to a known Linux kernel bug. Please
NVRM: see the README section on 64-bit BARs for additional
NVRM: information.
Mar 02 10:15:03 gondolin kernel: nvidia: probe of 0000:01:00.0 failed with error -1
Mar 02 10:15:03 gondolin kernel: Error: Driver 'nvlink' is already registered, aborting...
Mar 02 10:15:03 gondolin kernel: NVRM: The NVIDIA probe routine failed for 1 device(s).
Mar 02 10:15:03 gondolin kernel: NVRM: None of the NVIDIA graphics adapters were initialized!
Mar 02 10:15:03 gondolin kernel: [drm] Module unloaded
Mar 02 10:15:03 gondolin kernel: NVRM: NVIDIA init module failed!
Mar 02 10:15:03 gondolin systemd-udevd[15488]: Failed to apply ACL on /dev/dri/card1: No such file or directory
Mar 02 10:15:03 gondolin systemd-udevd[15488]: Failed to apply ACL on /dev/dri/card1: No such file or directory
Mar 02 10:15:04 gondolin systemd-udevd[15488]: Failed to apply ACL on /dev/dri/card1: No such file or directory
Mar 02 10:15:04 gondolin systemd-udevd[15488]: Failed to apply ACL on /dev/dri/card1: No such file or directory
Any thoughts?

Disable auto-calculation of tax amount by Autoinvoices to import AR Invoice

Hi all,
I am using ra_interface_lines_all to do AR Invoices conversion to Oracle R12. My legacy invoices data contains tax amount and some of the invoices do not have any tax. Autoinvoice auto-calculated tax information during import even for those invoices that have no tax.
I checked my AR interface record and made sure none of the tax-related columns (e.g. tax_code, tax_amount, etc) are populated. I also checked the AR transaction source for conversion and make sure tax-calculation flag is not set.
Basically I need to set the tax amounts manually instead of letting the system to derive it. Some suggested to set tax_exempt_flag to "E". I tried but Autoinvoice complained that I need to have tax reason and besides I have many invoices that have tax amounts.
Any suggestions on disable the auto-calculation of tax?
Thanks! Mike

Hi Mike,
U r using transaction types to generate your distributions, right?
Try to insert distribution info for each of your invoices in the table ra_interface_distributions_all, specifying REC, REV and TAX (tax where applicable) lines.
Hope this will solve your prob.
Vik

LOV view criteria missing in af:query field when AM pooling is disabled

Hi all,
Again, another strange behaviour with fields in af:query when AM pooling is disabled.
I have a field with a LOV in the af:query area. This LOV has a view criteria that involves a bind variable. In the VO, the view accessor for this LOV applies the view criteria and sets the bind variable. When AM pooling is disabled, double clicking a row or clicking the OK button in the LOV window removes the where clause defined by the view criteria. When activation occurs, the bind variable still exists but the framework doesn't know where to apply it...
Any help will be very appreciated,
Thanks
JDeveloper 11.1.1.3.0 with ADF BC
We've just realised that this behaviour occurs even when pooling is enabled. So this is becoming now a serious problem.
The scenario is as following: We have two LOVs in the search area (af:query). One of them is dependent on the other. Then, this second LOV has a view criteria and a bind variable representing the value selected for the first LOV. The query for the second LOV is filtered properly, but once a value has been selected and the LOV window dismissed, nothing is returned to the field.
We have observed that SecondLovViewImpl.executeQueryForCollection() method executes twice:
1. When LOV is opened: here, the bind variable is correctly setted.
2. When a row in the LOV table is selected: here, the bind variable is reset to null.
The log says (in Spanish):
<OracleSQLBuilderImpl><bindParamValue> [46062] Binding null of type 12 for "bindProgram"
<FacesCtrlLOVBinding$ListOfValuesModelImpl><_getRowFromSelectedRowKey> ADFv: No se ha encontrado ninguna fila para rowKey: [oracle.jbo.Key[P1 SP11 ]].
I would be very grateful if somebody asked me... even for saying "this is nonsense", "this is a known bug", "cascading LOVs are not supported by af:query", or anything else... If a code snippet is required, I'll put it as well.
Thanks in advance
Edited by: Marge on 02-sep-2010 5:41

Hi,
there are two bugs associated with bind variables in successors that I am aware of. One of them is supposed to be fixed in the next patch set, another one is still open. However, both problems were found with AM pooling enabled as well, so I don't know this is the same problem (though it sounds like). If you can, I suggest to create a reproducible testcase on one of the Oracle database schema, like HR or OE, and file a bug. If you don't have a time for or access to support, send the test case in a zip file (rename ".zip" to ".unzip") to the mail Id you find in my OTN profile. However, be aware that when I file the bug then it wont be visible for you, nor can it be escalated on your behalf. Anyway, at least it would get filed
Frank

More Trouble with Realtek Ethernet RTL8111/8168/8411 (rev 12)

Hello everybody!
I got the same problem as others with the ethernet controller model mentioned in the title, but i have (rev 12) not 6 or 10 like others ...
I followed this thread:
https://bbs.archlinux.org/viewtopic.php?id=176413&p=2
... but none of the solutions worked.
i plugin the ethernet cable but network manager still shows "no cable attached" and no ip adress information ...
here are my details:
i have the same problem in kernel 3.16 and 3.14
$ ifconfig
enp3s0f1: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether 00:90:f5:f9:fd:d9 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 0 (Local Loopback)
RX packets 656 bytes 51072 (49.8 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 656 bytes 51072 (49.8 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlp2s0: wlan chip by intel works fine
$ lspci -v
03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5287 (rev 01)
Subsystem: CLEVO/KAPOK Computer Device 5494
Flags: bus master, fast devsel, latency 0, IRQ 56
Memory at f7c15000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at f7c00000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: rtsx_pci
Kernel modules: rtsx_pci
03:00.1 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 12)
Subsystem: CLEVO/KAPOK Computer Device 5494
Flags: bus master, fast devsel, latency 0, IRQ 61
I/O ports at e000 [size=256]
Memory at f7c14000 (64-bit, non-prefetchable) [size=4K]
Memory at f7c10000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169
the computer that has the problem is a laptop and i dunno why there are 2 Realtek Entries ... it definitly has only ONE ethernet port!
((installing aur r8168 and loading the module ofc did not fix the problem as suggested by others ...))
$ dmesg | grep 8169
[ 2.304595] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.304609] r8169 0000:03:00.1: can't disable ASPM; OS doesn't have ASPM control
[ 2.310138] r8169 0000:03:00.1: irq 61 for MSI/MSI-X
[ 2.310452] r8169 0000:03:00.1 eth0: RTL8411 at 0xffffc900018c6000, 00:90:f5:f9:fd:d9, XID 1c800880 IRQ 61
[ 2.310457] r8169 0000:03:00.1 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 5.594516] r8169 0000:03:00.1 enp3s0f1: rtl_phy_reset_cond == 1 (loop: 100, delay: 1).
[ 5.596608] r8169 0000:03:00.1 enp3s0f1: link down
thanks for reading!
Last edited by brrbrrbruno (2014-08-30 03:28:21)

Any updates? I have RTL8111/8168/8411 version 01 and it's not working at al for me (currently on 3.16.3-1-ARCH)
[root@pc whoop]# netctl start static
Job for [email protected] failed. See 'systemctl status [email protected]' and 'journalctl -xn' for details.
[root@pc whoop]# systemctl status [email protected]
● [email protected] - A basic static ethernet connection
Loaded: loaded (/etc/systemd/system/[email protected]; enabled)
Active: failed (Result: exit-code) since Thu 2014-09-25 17:31:45 CEST; 8s ago
Docs: man:netctl.profile(5)
Process: 1021 ExecStart=/usr/lib/network/network start %I (code=exited, status=1/FAILURE)
Main PID: 1021 (code=exited, status=1/FAILURE)
Sep 25 17:31:40 pc systemd[1]: Starting A basic static ethernet connection...
Sep 25 17:31:40 pc network[1021]: Starting network profile 'static'...
Sep 25 17:31:45 pc network[1021]: No connection found on interface 'eth0' (timeout)
Sep 25 17:31:45 pc network[1021]: Failed to bring the network up for profile 'static'
Sep 25 17:31:45 pc systemd[1]: [email protected]: main process exited, code=exited, status=1/FAILURE
Sep 25 17:31:45 pc systemd[1]: Failed to start A basic static ethernet connection.
Sep 25 17:31:45 pc systemd[1]: Unit [email protected] entered failed state.
[root@pc whoop]# journalctl -xn
-- Logs begin at Tue 2014-02-04 00:43:12 CET, end at Thu 2014-09-25 17:31:45 CEST. --
Sep 25 17:31:40 pc systemd[1]: Starting A basic static ethernet connection...
-- Subject: Unit [email protected] has begun with start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit [email protected] has begun starting up.
Sep 25 17:31:40 pc network[1021]: Starting network profile 'static'...
Sep 25 17:31:40 pc kernel: r8169 0000:03:00.0 eth0: link down
Sep 25 17:31:40 pc kernel: r8169 0000:03:00.0 eth0: link down
Sep 25 17:31:40 pc kernel: IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Sep 25 17:31:45 pc network[1021]: No connection found on interface 'eth0' (timeout)
Sep 25 17:31:45 pc network[1021]: Failed to bring the network up for profile 'static'
Sep 25 17:31:45 pc systemd[1]: [email protected]: main process exited, code=exited, status=1/FAILURE
Sep 25 17:31:45 pc systemd[1]: Failed to start A basic static ethernet connection.
-- Subject: Unit [email protected] has failed
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit [email protected] has failed.
-- The result is failed.
Sep 25 17:31:45 pc systemd[1]: Unit [email protected] entered failed state.
Last edited by whoop (2014-09-25 15:37:59)

SPDIF output is disabled when connecting a HDMI device

Hello, hope someone can help.
I've got a Toshiba SAT U500 with Realtek audio driver. I want to send the video to the TV (via HDMI) and still send audio via SPDIF to the digital receiver. By some reason it is automatically enabling HDMI audio when I connect the TV, and on the SPDIF output (icon on Windows 7 -> Control Panel -> Hardware and Sound -> Sound) a telephone sign appears.
What does that telephone sign mean? How to make the system not to disable SPDIF output when connecting a HDMI device?
Thanx in advance!!!

Howdy Gdad_Edw,
Welcome to Apple Support Communities.
Take a look at the article linked below, it provides information and troubleshooting tips that can help you resolve the no video issue with your Apple Digital AV Adapter and your iPad.
About Apple Digital AV Adapters for iPhone, iPad, and iPod touch - Apple Support
Troubleshooting
If you encounter an issue using the Apple Digital AV Adapter or VGA Adapter:
Disconnect and reconnect the adapter from the iOS device and display.
Connect directly to the TV, projector, or external display using a known-good VGA or HDMI cable.
Remove any VGA or HDMI extension cables or converters.
Note that accessories that convert a VGA or HDMI signal to other video formats (DVI, Composite, Component) are not supported.
Ensure that you are using the latest version of iOS. Some Apple Digital AV Adapters require iOS 5.1 or later.
Ciao,
-Jason

Rev 1.2.1 disabling accessories?

Similar Messages

Maybe you are looking for