Rev. A Beige G3 DT compatible with USB 2.0 PCI cards?

Having had a lot of luck upgrading and updating some old Sawtooth G4s I decided to try my hand at something more interesting - an old Rev. A Beige G3 that fortuitously dropped into my lap.
I tried installing a 5-port USB 2.0 card with an NEC chipset, since apparently NEC's chipsets are the most compatible chipsets with the Mac. However, I've been getting Type 11 errors on startup everytime. Curiously, an older 2-port USB card works fine.
So my main question is: has anyone else seen this occurring? Have other successfully used NEC-based USB 2.0 PCI cards on their Rev. A Beige G3s?

Sorry for the inordinately long time it took me to reply. The OS running on the G3 is 9.2.2.
After doing some digging around I discovered a trick with replacing the OS 9 USB adapter card extensions with those from the installer for USB Adapter Card 1.4.1 updater. What I did was that I took out of my extensions folder the following files: USB Authoring Support, USB Device Extension, USB Software Locator, and USBAppleMonitor. I then ran the 1.4.1 update, and everything seems to work - the computer recognized the card and USB mice and hard drives were detected by the system.
I'm normally not one for mixing and matching extensions, but I'm glad the card now works.

Similar Messages

IPod touch will not work with USB 2.0 PCI Card?

I have a dual processor PowerMac G4 that has USB 2.0 via a PCI card. When I plug in the iPod nothing at all happens. I haven't read anything about PCI cards not being compatible with the touch. Is anyone else having this problem?

Just thought I'd add my 2 cents...I've got the same problem...I've had a Keyspan USB 2.0 5 port card in my Dual MDD G4 for years and it's worked fine. Well, until a few days ago when I tried updating some stuff on our iPods. It would initially start working then lose connection. Now nothing at all with 5 iPods. It won't even show up on the desktop under Disk Mode. I did the same and it works fine under the old stock USB 1.0 but slooooooowwww. Is this yet another problem with Leopard? I've searched the Keyspan site and they don't have any updated drivers. Guess I'll look for a Belkin as well...ugh!!! Leopard is horrible! First no printer drivers, then no iSub support, now this!

Compatible with USB 1.1?

I have an old G4 and before buying a new 4th gen nano, I want to be sure it's backwards compatible with USB 1.1. I know that transferring data will be excruciatingly slow, but I want to be sure I can connect it to my Mac.

I have no first hand experience, but traditionally all iPods up to the new ones just announces have all worked on USB1.1 ports. I assume (but do not know for sure) that the new ones will also continue to work with slow USB1.1 ports.
I was just looking at the new Classic user guide and there is a mention of... "Note: A USB 2.0 port is recommended to connect iPod classic. USB 1.1 is significantly slower than USB 2.0." so I assume the same holds true for the new Nanos.
Yep, just checked. In the Nano user guide...
http://manuals.info.apple.com/enUS/iPod_nano_4th_genUserGuide.pdf
on page 65 (chapter 7) same quote. So you look good to go. Although there have been errors in the past with Apple's new manuals which had to then be updated. Hopefully this isn't one of them.
Cheers,
Patrick

MSI H55M-E23 Mother Board is it compatible with Usb 3.0?

Just curios if the MSI H55M-E23 Mother Board is it compatible with Usb 3.0?
Thank you!

if you are asking if its able to use a USB 3.0 Device then the answer is yes but it will operate at USB2.0 speeds only on the ports as they are only USB 2.0 ports and USB 3.0 devices are backward compatible and can be used on USB 1.0a and USB 2.0 ports but will work only at the USB revision speed its connected to!

IPod 30GB will not work with 3rd party USB 2.0 PCI card

I've had an IOGear PCI USB 2.0 card (GIC220U-BIO) in my Sawtooth for some time now, and have been using it flawlessly with my Canon i860 printer, and Canon LiDE 30 Scanner.
Just recently I received a Video iPod (30GB) and wanted to take advantage the high speed USB bus offered on that card to sync my iPod. The problem is, when I plug in the iPod to the USB port on that card, I get the transparent gray box telling me that I need to restart my mac by pushing the reset switch, or holding the power button for several seconds (in other words, freezes).
The iPod works fine with the built-in USB ports (albeit slow), as well as the high speed port on my iBook G4. Why am I getting this error? There are no drivers or firmware updates for this PCI card available.
Is there a solution?

Yes, use a different USB 2.0 PCI card, like from Sonnet. I use a Sonnet in a G5 and it works great. There are (at least) 2 USB chipsets and I find the TI ones are great and the other not so great.
The fact it works on 1.1 and the 2.0 on the G4 at least tells you it is not the iPod and a USB 2 card is $20 or $30 at the most.

Installing a USB 2.0 PCI card

I'm looking to install a USB 2.0 PCI card in my Power Mac G4 867 mhz.
I've heard of problems doing this, and was looking for advice or suggestions for specific cards.
Thank you.

Hi-
To get optimal results from a USB 2.0 PCI card, get a card that has the NEC chipset. Via and Ali chipsets are problematic, and should be avoided.
Some USB 2.0 cards that have the NEC chipset are:
Adaptec 3100LP
BAFO BF-460
Belkin F5U220
GWC UC-160
IOGear GIC250U
Keyspan U2PCI-5
O'toLink U2-C2B
O'toLink U2-C2A
O'toLink U2-P20N
O'toLink U2-P50
Ratoc PCIU5
USBWholesale UII-PCIP
Even if the card isn't stated to be Mac compatible, OS X has NEC chipset support, and can use the card. I have two different cards bought from PC stores, that work great. And, they're alot cheaper than mac specific cards.
One of the biggest problem areas of USB 2.0 in a G4 is connection of an external harddrive, or other mass storage device. These devices invariably (with few, erratic exceptions) cause sleep freeze, even with a NEC chipset card.
For external harddrives, on a G4, USB 2.0 is not a convenient option.
For more on other user experiences with various USB cards, see Xlr8yourMac.

USB 2.0 PCI cards

I've got an old Power Mac G4 Quicksilver, which means I don't have USB 2.0 ports. I'm not sure the new printer I'm getting supports anything older than USB 2.0, so I'm looking at some of the USB 2.0 PCI cards. I'm finding them for, like, $12, which seems like no big deal.
My machine's obviously nowhere near new, tho', so I want to make sure these PCI cards are compatible. The cards' specs say "Compliant with PCI specification 2.2," for example, but I can't find any Apple specs that would tell me whether that means they would work in my Quicksilver. Any ideas?

Thanks -- that's good to know (about the USB 1.1/2.0 backwards compatibility). Some printers I'd seen listed only USB 2.0 compatibility, others listed 1.0 and 2.0, so I wasn't sure. I'll wait and try out the new printer before I start worrying about other options.
Now, should push come to shove, the PCI card I'd been looking at was definitely Mac compatible (listed as such, available through Macmall.com). And as I went on safari though Apple's support site, I did finally find the "Setting up your Mac" manual for my Quicksilver.
Hidden on Page 80 of that I found instructions to "install only expansion cards that come with Macintosh driver software and that comply with the PCI 2.1 standard." If I'm finding cards that comply with the PCI 2.2 standard, suppose I should expect them to work in my machine?

Kernel panic after installing a USB 3.0 PCIe card

Hello everybody,
I have a recent issue with my Mac Pro (early 2008). I just bought a USB 3.0 PCIe card from eBay for my Mac Pro and as the seller mentioned there are drivers for Mountain Lion. After installing the cards drivers that the seller sent me and plugged the PCIe card, whenever I connect a USB 3.0 device (I have only one) the Mac Pro is forced to reboot. If I leave the drive connected after the reboot I get a kernel panic message during the "Grey Apple Boot Screen" and the computer continues to reboot again and again. I have no issues with USB 2.0 devices at the same card. The kernel I get is the following. Does anyone have any idea? it seems like the kext installed with the card {net.osx86.kexts.VLIUSBXHCI(1.2.4)} causes the problem but the seller told me he has sold a lot of them, and i 'm the first with such a problem.
Thank you in advance.
Tue Aug 27 10:58:35 2013
panic(cpu 3 caller 0xffffff800a4b8655): Kernel trap at 0xffffff7f8aa00cf8, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000000000, CR3: 0x000000000c9a4000, CR4: 0x0000000000000660
RAX: 0x000000000b1cb000, RBX: 0xffffff8019bbee00, RCX: 0xffffff801981b010, RDX: 0x0000000000000000
RSP: 0xffffff80bba3b650, RBP: 0xffffff80bba3b690, RSI: 0x0000000000000000, RDI: 0xffffff8019bba630
R8: 0xffffff80bba3b570, R9: 0x0000000000000200, R10: 0xffffff8019bba630, R11: 0xffffff8019bba600
R12: 0x0000000000000000, R13: 0x0000000000000200, R14: 0xffffff80c1c7e000, R15: 0xffffff801981b000
RFL: 0x0000000000010206, RIP: 0xffffff7f8aa00cf8, CS: 0x0000000000000008, SS: 0x0000000000000000
Fault CR2: 0x0000000000000000, Error code: 0x0000000000000002, Fault CPU: 0x3
Backtrace (CPU 3), Frame : Return Address
0xffffff80bba3b2f0 : 0xffffff800a41d626
0xffffff80bba3b360 : 0xffffff800a4b8655
0xffffff80bba3b530 : 0xffffff800a4ce17d
0xffffff80bba3b550 : 0xffffff7f8aa00cf8
0xffffff80bba3b690 : 0xffffff7f8aa0a625
0xffffff80bba3b6c0 : 0xffffff7f8aa0a2a9
0xffffff80bba3b770 : 0xffffff7f8aa09f1a
0xffffff80bba3b7d0 : 0xffffff7f8aa036f3
0xffffff80bba3b7f0 : 0xffffff7f8a9b3591
0xffffff80bba3b850 : 0xffffff800a84907a
0xffffff80bba3b8b0 : 0xffffff7f8a9c400e
0xffffff80bba3b910 : 0xffffff7f8a9c41dd
0xffffff80bba3b970 : 0xffffff7f8a9a2eec
0xffffff80bba3b9a0 : 0xffffff7f8a9a1bbf
0xffffff80bba3b9e0 : 0xffffff800a83085b
0xffffff80bba3ba40 : 0xffffff7f8a9a1b09
0xffffff80bba3ba70 : 0xffffff800a84907a
0xffffff80bba3bad0 : 0xffffff7f8a9a1a74
0xffffff80bba3bb10 : 0xffffff7f8aeaa195
0xffffff80bba3bb40 : 0xffffff800a83194b
0xffffff80bba3bb80 : 0xffffff800a83146e
0xffffff80bba3bc10 : 0xffffff800a82d400
0xffffff80bba3bc50 : 0xffffff800a82d10f
0xffffff80bba3bc90 : 0xffffff800a82cfc4
0xffffff80bba3bcd0 : 0xffffff7f8a9ad2bd
0xffffff80bba3bd00 : 0xffffff7f8a9adb68
0xffffff80bba3bda0 : 0xffffff7f8ae08b47
0xffffff80bba3bdd0 : 0xffffff7f8ae085b9
0xffffff80bba3be40 : 0xffffff7f8ae07f6c
0xffffff80bba3be60 : 0xffffff800a83194b
0xffffff80bba3bea0 : 0xffffff800a83146e
0xffffff80bba3bf30 : 0xffffff800a82d400
0xffffff80bba3bf70 : 0xffffff800a831fc9
0xffffff80bba3bfb0 : 0xffffff800a4b3137
      Kernel Extensions in backtrace:
         com.apple.iokit.IOUSBFamily(5.6)[065077C5-A49E-3C52-BDC0-60169E293563]@0xffffff 7f8a997000->0xffffff7f8a9f2fff
            dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f8a96e000
         net.osx86.kexts.VLIUSBXHCI(1.2.4)[00000000-0000-0000-0000-000000000000]@0xfffff f7f8a9ff000->0xffffff7f8aa17fff
            dependency: com.apple.iokit.IOUSBFamily(5.6.0)[065077C5-A49E-3C52-BDC0-60169E293563]@0xffff ff7f8a997000
            dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f8a96e000
         com.apple.driver.AppleUSBComposite(5.2.5)[E52D4507-6DB1-392E-B46B-FC7107573D4C] @0xffffff7f8ae07000->0xffffff7f8ae0dfff
            dependency: com.apple.iokit.IOUSBFamily(5.6.0)[065077C5-A49E-3C52-BDC0-60169E293563]@0xffff ff7f8a997000
         com.apple.iokit.IOUSBAttachedSCSI(1.0.3)[1EBCBF6E-4BB8-341D-8B0B-D35C69425E67]@ 0xffffff7f8aea6000->0xffffff7f8aeadfff
            dependency: com.apple.iokit.IOUSBFamily(5.6.0)[065077C5-A49E-3C52-BDC0-60169E293563]@0xffff ff7f8a997000
            dependency: com.apple.iokit.IOStorageFamily(1.8)[5BA4CD36-E96D-3A9E-ADFF-A863BBD63BC7]@0xff ffff7f8aa96000
            dependency: com.apple.iokit.IOSCSIArchitectureModelFamily(3.5.5)[DCE95F6E-F7D4-33D8-9515-FB C4FF5B1AB4]@0xffffff7f8ab65000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
Not yet set
Kernel version:
Darwin Kernel Version 12.4.0: Wed May 1 17:57:12 PDT 2013; root:xnu-2050.24.15~1/RELEASE_X86_64
Kernel UUID: 896CB1E3-AB79-3DF1-B595-549DFFDF3D36
Kernel slide:     0x000000000a200000
Kernel text base: 0xffffff800a400000
System model name: MacPro3,1 (Mac-F42C88C8)
System uptime in nanoseconds: 1372235172
last loaded kext at 1219506626: com.apple.driver.CSRHIDTransitionDriver          4.1.4f2 (addr 0xffffff7f8b24a000, size 16384)
loaded kexts:
com.rogueamoeba.InstantOn          6.0.2
net.osx86.kexts.VLIUSBXHCI          1.2.4
com.apple.driver.CSRHIDTransitionDriver          4.1.4f2
com.apple.iokit.IOUSBAttachedSCSI          1.0.3
com.apple.iokit.SCSITaskUserClient          3.5.5
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCIBlockStorage          2.3.1
com.apple.driver.AppleFileSystemDriver          3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          34
com.apple.driver.AppleUSBXHCI          5.6.0
com.apple.driver.AppleUSBHub          5.5.5
com.apple.driver.AppleIntel8254XEthernet          3.1.1b1
com.apple.driver.AppleAHCIPort          2.5.2
com.apple.driver.AppleFWOHCI          4.9.6
com.apple.driver.AppleIntelPIIXATA          2.5.1
com.apple.driver.AppleUSBEHCI          5.5.0
com.apple.driver.AppleUSBUHCI          5.2.5
com.apple.driver.AppleEFINVRAM          1.7
com.apple.driver.AppleACPIButtons          1.7
com.apple.driver.AppleHPET          1.8
com.apple.driver.AppleRTC          1.5
com.apple.driver.AppleSMBIOS          1.9
com.apple.driver.AppleACPIEC          1.7
com.apple.driver.AppleAPIC          1.6
com.apple.driver.AppleIntelCPUPowerManagementClient          196.0.0
com.apple.nke.applicationfirewall          4.0.39
com.apple.security.quarantine          2.1
com.apple.driver.AppleIntelCPUPowerManagement          196.0.0
com.apple.driver.AppleUSBHIDKeyboard          170.2
com.apple.driver.AppleHIDKeyboard          170.2
com.apple.iokit.IOUSBHIDDriver          5.2.5
com.apple.iokit.IOSCSIBlockCommandsDevice          3.5.5
com.apple.iokit.IOUSBMassStorageClass          3.5.1
com.apple.driver.AppleUSBMergeNub          5.5.5
com.apple.driver.AppleUSBComposite          5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.5.5
com.apple.iokit.IOBDStorageFamily          1.7
com.apple.iokit.IODVDStorageFamily          1.7.1
com.apple.iokit.IOCDStorageFamily          1.7.1
com.apple.iokit.IOATAPIProtocolTransport          3.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily          3.5.5
com.apple.iokit.IONetworkingFamily          3.0
com.apple.iokit.IOUSBUserClient          5.5.5
com.apple.iokit.IOAHCIFamily          2.3.1
com.apple.iokit.IOFireWireFamily          4.5.5
com.apple.iokit.IOATAFamily          2.5.1
com.apple.iokit.IOUSBFamily          5.6.0
com.apple.iokit.IOHIDFamily          1.8.1
com.apple.driver.AppleEFIRuntime          1.7
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          220.3
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.DiskImages          345
com.apple.iokit.IOStorageFamily          1.8
com.apple.driver.AppleKeyStore          28.21
com.apple.driver.AppleACPIPlatform          1.7
com.apple.iokit.IOPCIFamily          2.7.3
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.corecrypto          1.0

That card appears to be a Via Labs VL800 and Via has no Mac drivers, so gosh only knows where that kext came from. I'd highly recommend you remove it and consider getting a card from Sonnet where you can get proper Mac support:
http://www.sonnettech.com/product/allegrousb3pcie.html
To me it's not worth saving a few bucks from some generic card/driver pair to risk problems and perhaps even malware.
Regards.

USB 2.0 PCI card VT6202 chipset?

Hi there,
I own a QS 733 and want to put get a bit more life out of the machine, so thought I would install a USB 2.0 card. Trawling through eBay, the inexpensive cards all seem to be based on the VIA VT6202 chipset. The Via website claims to have Mac drivers for this set:http://www.viaarena.com/default.aspx?PageID=420&OSID=23&CatID=2470&SubCatID=122 but unfortunately I get a time out when I try to get the linked file.
Does anyone have experience with these cards on a Mac?
Many thanks in advance for your help!
All the best,
Dan

Hi-
The linked PCI card with the NEC chip-set will be better than a VIA or ALI chip-set card. It should work, and you don't need to worry about drivers- all you need is within Tiger.
So, as far as issues with sleep, either not sleeping, or, the most common problem, not waking from sleep. VIA and ALI chip-sets can cause problems with no device attached at all. NEC chip-sets allow the card to reside nicely in the computer (no conflicts), but the connected device may cause problems.
Memory writing USB hardware, or, as I like to say, mass storage devices, can be used on the USB 2.0, but, to keep from having sleep problems, especially if they are USB powered (like the iPod, and some card readers), the device must be ejected, and disconnected, before sleeping the computer.
Other devices, printers, scanners, cameras, some card readers, and such, are on a case by case basis. If the device has it's own power supply, often times they won't cause any problems. If, the device does cause a sleep problem while connected to the PCI card, often times a powered USB 2.0 hub between the device and the USB card will take care of the problem.
Real world results- I have a Logicool QCam Ultra, a powered mouse-pad, a Wacom tablet, and a HP All-in-one printer connected to my USB 2.0 card. All devices work without causing sleep problems. I also have a 30gb iPod. If I leave the iPod connected when I command sleep, or if the computer goes to sleep while the iPod is connected, I cannot wake the machine. It requires a hard restart (holding the power button for 5 seconds) to bring the machine back. As long as I eject and disconnect the ipod, all is fine with sleep. To aid in the connect/disconnect, I leave the iPod cable connected to the PCI card, and leave the cable where it is easily accessed.
Many people will inquire as to external USB hard drives-I say, firewire is better, period. USB HDD's and USB 2.0 PCI cards are the most common culprits with USB 2.0 incompatibilities. If you want headaches, use USB HDD'S and USB 2.0 PCI cards.
Testing each USB 2.0 device, individually, will soon confirm whether or not special needs are required. I realize that most all of us are "plug it and leave it" conditioned, but, with some modification of habits, USB 2.0 can work, and work well, on non USB 2.0 native machines.

What is the correct USB 3.0 PCIE card for Z800?

I'm looking to buy the correct USB 3.0 PCIe card for a Z800, but I cant find any thru HP. Any have any info> There's 12 and 60 dollar HP cards on EBAY, but I don't know if those are correct ones.
This question was solved.
View Solution.

Hi,
Based on the following specs, the machine has plenty of options:
http://h18000.www1.hp.com/products/quickspecs/13278_na/13278_na.PDF
You can buy 1-port card, 2-port card, 3-port card or even 4-port card such as:
http://www.startech.com/Cards-Adapters/USB-3.0/Cards/2-Port-PCI-Express-SuperSpeed-USB-3-Card-Adapte...
You need to check the slot to get the right bracket for the card.
Regards.
ps eBay is a different story, you can buy few dollars card.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Using a lan/hpib gateway (Agilent) with a NI GPIB pci card

Need to be able to use a E2050 lan/hp-ib gateway (Agilent) together with a NI GPIB pci card on the same workstation (windows). I need 2 seperate gpib busses but also need the remote functionality or the lan/hpib box. I would use ni enet but it will not work together with a installed gpib card, only one or the other. Read information on useing an hp card with a ni card in the same system but cannot get it to work with the lan box. I do not have a hp card to install in my computer to see if that works or not. Has anyone attempted a similar task?

Hello-
It is possible to use a PCI and ENET board in Windows 9X/ME. The solution for Windows NT/2000 is to use the new VISA server technology using two computers.
Computer A:
This is a computer that will not use a GPIB plug-in board, but is on the network. Install the GPIB-ENET/100 driver and VISA 2.6. Then, set the appropriate VISA server permissions and run VISAServer.exe (see the VISA Programmer's Reference for more details ni.com/manuals).
Computer B:
Install the PCI-GPIB driver and VISA 2.6. Use Remote VISA to access the ENET/100 through the other computer's driver.
This is also a very useful technology for remotely controlling numerous instruments throughout a distributed laboratory.
Randy Solomonson
Application Engineer
Natio
nal Instruments

JNI to access functions of a dll to deal with a data aquision pci card

i am trying to do an applicattion to access the functions of a dll
to deal with a data aquision pci card (Analogig/Digital pci card).
i�m using jni of course, but i have some problems.
first i did a class called "TesteDll" witch contains all the native methods to access the functions of the pci card.
after, i did a "TesteDll.jar" to use these methods in another applicattions.
everything was fine until there. so created a single program like this:
TesteDll td = new TesteDll();
short res1 = td.P1602_DriverInit(wTotalBoards);
short r = td.P1602_ActiveBoard((short)0); // ativa a placa
short res2 = td.P1602_GetConfigAddressSpace((short)0,wAddrTimer,wAddrCtrl,wAddrDio,wAddrAdda);
int dwRepeat;
for(dwRepeat=0 ; dwRepeat<100 ; dwRepeat++)
short wRetVal;
wRetVal = td.P1602_ClearScan();
wRetVal += td.P1602_AddToScan((short)0,(short)0,(short)1,(short)0,(short)0,(short)0);     // CH:0 to scan
wRetVal += td.P1602_SaveScan((short)0,wV0);
wRetVal += td.P1602_AddToScan((short)2,(short)0,(short)1,(short)0,(short)0,(short)0);     // CH:2 to scan
/* ->error here!*/ wRetVal += td.P1602_SaveScan((short)1,wV2);
the programs compile correctly, but in the execution the folowing error was descripted:
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : EXCEPTION_ACCESS_VIOLATION (0xc0000005) occurred at PC=0x8079A50
Function=[Unknown.]
Library=(N/A)
NOTE: We are unable to locate the function name symbol for the error
just occurred. Please refer to release documentation for possible
reason and solutions.
Current Java thread:
at TesteDll.P1602_SaveScan(Native Method)
at Teste2.main(Teste2.java:119)
Dynamic libraries:
0x7CD80000 - 0x7CD9D000      C:\WINDOWS\SYSTEM\IMAGEHLP.DLL
Heap at VM Abort:
Heap
def new generation total 576K, used 161K [0x10010000, 0x100b0000, 0x104f0000)
eden space 512K, 31% used [0x10010000, 0x100385c0, 0x10090000)
from space 64K, 0% used [0x10090000, 0x10090000, 0x100a0000)
to space 64K, 0% used [0x100a0000, 0x100a0000, 0x100b0000)
tenured generation total 1408K, used 0K [0x104f0000, 0x10650000, 0x14010000)
the space 1408K, 0% used [0x104f0000, 0x104f0000, 0x104f0200, 0x10650000)
compacting perm gen total 4096K, used 1044K [0x14010000, 0x14410000, 0x18010000)
the space 4096K, 25% used [0x14010000, 0x141152e8, 0x14115400, 0x14410000)
Local Time = Wed Jun 01 10:21:14 2005
Elapsed Time = 0
# The exception above was detected in native code outside the VM
# Java VM: Java HotSpot(TM) Client VM (1.4.2_06-b03 mixed mode)
functions like "P1602_DriverInit(wTotalBoards)","P1602_ActiveBoard((short)0)" functions correctly.
i run the same program in c++ builder and everythings goes fine, but i need to do it in java. i don�t know what to do,can you help me?
thanks

i almost forgot, i�m using win 98.
First i used Dev C++ to make the JNI dll and the error ocurred at the first call of "P1602_AddToScan()" function. after i made the jni dll using C++ Builder, and the error ocurred at the second call of "P1602_SaveScan()" function. but the error message in both cases was the same.
for(dwRepeat=0 ; dwRepeat<100 ; dwRepeat++)
short wRetVal;
wRetVal = td.P1602_ClearScan();
/*First Error - Dev C++*/ wRetVal += td.P1602_AddToScan((short)0,(short)0,(short)1,(short)0,(short)0,(short)0); // CH:0 to scan
wRetVal += td.P1602_SaveScan((short)0,wV0);
wRetVal += td.P1602_AddToScan((short)2,(short)0,(short)1,(short)0,(short)0,(short)0); // CH:2 to scan
/* Second error C++ Builder */ wRetVal += td.P1602_SaveScan((short)1,wV2);
...

Is The iPod Touch Backward Compatible With USB 1.1 Connections?

Hi. I intend to get the iPod Touch soon. But, before I make the leap, I'd like to know whether the iPod Touch is backward compatible with my older USB 1.1 connections. Any help will be appreciated here. Thank you.

Hello Castlegard,
As mentioned, the Minimum System Requirements for the iPod Touch does specify USB 2.0, see the requirements here:
http://support.apple.com/kb/TS1323
While it is theoretically possible to sync over a USB 1.1 connection, your mileage may vary. Consider that USB 1.1 has a transfer rate of 12Mbit/sec, where USB 2.0 is 480Mbit/sec, so USB 2.0 is basically 40x faster. Transferring small files may succeed, but when you try to get iTunes to update or restore an iPod Touch, it will be trying to push a 300MB file (approximately) through a 12Mbit pipe. Trying to do updates or restore via USB 1.1 will often result in iTunes timing out before the process is complete.
If I were to try to sync a 1.5GB movie over a USB 1.1 connection, I could probably go to downtown Sydney and have a nice dinner and attend a concert at the Sydney Opera House and still get back before the sync was complete. BTW, I live in California...
If your computer is a desktop tower, upgrading to USB 2.0 is a relatively inexpensive proposition. If you are not a handy person with a phillips screwdriver or electical devices, most computer dealers or resellers will install for a nominal fee.
Charles H.

When will USB 3.0 be truly backwards compatible with USB 2.0 audio interfaces?

hello
I own a U46DJ mkII audio interface. I use the interface for music production, particularly recording vocals.
The device performs well on my windows laptop, I can record clean vocals with no artifacts. On the macbook pro however, the incoming audio signal is full of digital pops and clicks.
After spending a few days searching for solutions on google I narrowed it down to the USB 3.0 ports on the new macbook pro.
Lots of people with with all different brands of audio interface are experiencing problems while connecting them to USB 3.0 ports.
Here is an article on the topic: http://createdigitalmusic.com/2012/06/usb-3-0-backwards-compatible-in-theory-but -some-audio-drivers-arent-cooperating/
So, when will USB 3 be truly backwards compatible with our USB 2 devices?

Tuesday. That's what I heard.
Perhaps the driver is the problem. Check with the interface manufacturer.
I have a Focusrite USB interface that sounds great but Pro Tools and Logic kept crashing when I used it. I went back and forth with Focusrite, they had several beta drivers which they sent me, none of which fixed the problem. Turns out the interface works better without the driver from the manufacturer.
I find it hard to blame Apple for this. It's not like they didn't have the ML beta out for a long time for all the device manufacturers to test their drivers and their hardware with. Apple can't keep tabs on every third party developer on the planet and design their software and hardware to keep all of them happy.
If you want to give Apple some feedback you can do it here: Apple - Mac OS X - Feedback

Is Ipod photo compatible with USB 1.1?

Can Ipod photo be used on older style PC with usb 1.1? I notice on the requirements for Ipod photo that you need USB 2.0.

Hello James, welcome to discussions.
You can use USB 1.1... but it will be rather slow to transfer files.
What type of computer do you own? I would recommend that you install a Firewire card if you can, and use that.
The Adaptec Fireconnect 4300 card would only run about $40 and it would work great with your iPod.

Rev. A Beige G3 DT compatible with USB 2.0 PCI cards?

Similar Messages

Maybe you are looking for