Reval - Good Will Account

Experts,
Does Goodwill account need to be an open item managed account for it to be revalued during the run of f.05 or does it need to be a non open item managed account so that it gets revalued when f.06 is run.
All answers would be duly appreciated and rewarded with points.
Thanks,
Nandita

Goodwill is normally part of intangible property and is usually not an open item managed account. For the forex revaluation it doesn't have to be an OI managed account.
Regards
Sharabh Ivaturi

Similar Messages

  • OM: Generate Cost of Goods Sold Account (OECOGS) workflow

    Hi all
    I am new to apps and workflow, Can any one tell
    1) when OM: Generate Cost of Goods Sold Account (OECOGS) workflow will run after the "workflow backgroud process" request (or) at the time "workflow backgroud process" request? ( when we transfer the data from OM to AR we will run this "workflow backgroud" concurrent Request. But i dont know when this (OECOGS) will run)
    2) Can any one help to find out which exact package trasfering the data from OM to RA_interface_lines_all

    For 1):
    When a workflow is launched (create and start) from anywhere in the application a form or batch program, the workflow will continue to process all activities until it finds an error or it is explicitly defined to deferred the current activity. In that case the activity will be put in a workflow queue, so that later on the worfklow background process resumes such activity till the workflow is completed or again an error is hit or the activity is explicitly defined to be deferred.
    So basically when a worfklow is launched, it will process as much as it can till it is completed. The background process will progress a workflow when it did not complete in the original kick off; otherwise it is not needed to run the background process to complete a WF.
    Yes, the status monitor is a good tool to tell what stage a workflow process is at.
    For second question you might need to open a forum thread on the involved functional groups.

  • Compare with my cost of goods sold account to my sales revenue account

    Hi,
    i want to compare with my cost of goods sold account to my sales revenue account.
    After PGI my COGS a/c will be debited INVENTORY a/c will be credited so after sales my SALES a/c credit & customer a/c debit . I want to see what is the difference value of COGS a/c with respective billing Sales A/C
    No doudt we can see in Profit of margin in billing doc. It is quite impossible to see all document in respective wise. Please give a solution for which i can know what is profit of margin with comparing values in both of Account.
    Thank's
    Abhay

    Hi,
    This is possible through CO-PA report. You can get the result per sales order.
    Also the same can be achieved in FI as follows:
    Outbound delivery document thr" VL01N is captured in "Reference field" of FI doc (BKPF-XBLNR) generated through delivery.
    If the settings are done by SD person to capture the outbound delivery no. in "Reference field" of FI doc generated through Billing document (VF01), then there will be a common field to compare the documents in both accounts.
    In transaction FAGLL03, select the account COGS & Sales revenue account. Once the report displays, sort or take sub total on this common field "Reference".
    This will give you difference between COGS & Sales revenue per document.
    Hope this resolves your query.
    Regards,
    Ashutosh

  • Wanted flow of this OM: Generate Cost of Goods Sold Account (OECOGS)"–

    Hi All
    I want to customize standard Workflow "OM: Generate Cost of Goods Sold Account (OECOGS)"– generates COGS account when interfacing invoices to AR. Scenario is like this
    Standard Oracle Entries generated at sales
    COGS Dr 110.00
    To Inventory A/c Cr 110.00
    Based on some %age we need to break the entries as below.
    Customization required:
    Materials Dr 50.00
    Labour Dr 40.00
    Over Head Dr 20.00
    to Inventory A/c Cr. 110.00
    Is this Possible in Customization? If possible can you give the idea.
    This workflow will run when interfacing invoices to AR, I want to know name of pl/sql procedure which is transfering the date form OM to AR Interface table???
    Please look into this

    Hi;
    Please check below which could be helpful for your issue:
    COGS WORKFLOW FAILING DURING INTERFACE TRIP STOP - 'OECOGS/#SYNCH' [ID 1072959.1]
    Common Errors and Solutions when Using Workflow in Order Management [ID 429462.1]
    Also see:
    Workflow customization
    Re: Workflow Customization
    Regard
    Helios

  • Goods issue accounting document

    Hello All,
    I have a sales orderand Billing invoice number, What i need is Goods issue delivery document number and the goods issue accounting document number.
    Please let me know the tables and mapping condition to get goods issue Accounting document number.
    Thanks
    Raghuram

    HI,
    As i understand Your query i positing.
    Please check in VA03 the Status Overview of Order for which OBD done(Shift+F5).
    Overther you will find the OBD no. as well Goods Issue Doc no (material Doc no) and with this GI no. in MIGO display you will find the Accounting Document.
    Tables for OBD is LIKP and MIGO is MSEG. as well MBEW is for Accounting data. as well the Accounting Document will be trace out with FB03 Tcode.
    Try and reply.
    Regards,
    Ninad Kshirsagar

  • Is there a way, that goods issue accounting document can be converted in

    Dear friends
    my sales order is in currency USD, while the accounting document WL
    after  the goods issue is in Canadian $,
    is there a way, that goods issue accounting document can be converted in
    USD.
    Regards
    Ravi

    Hi
    You can have multiple currencies in your system.  But all the transactions at accounting happen only at company code currency level.  You can view report in alternate currency.  Please check with your FI consultant  He will guide you more on the use of currency.  You can have CC currency, Group Currency,etc.
    Regards
    Yatin Thakkar

  • Good will hunting digital copy not showing up on apple tv

    I downloaded and redoes loaded good will hunting digital copy, included in my bluray.
    Well for some reason, good will hunting won't show up on my apple tv as purchased like other movies do.
    I know fox/universal digital copies won't work for now, but why doesn't good will hunting show up?
    It's a miramax/lions gate film.
    Any help would be appreciated.

    Same problem here, (and I know exactly what you are talking about). 
    So as directed by AppleCare Technical Support (I have AppleCare on all my Apple products), I sent the following e-mail to the iTunes support page that they directed me to, "All my other successfully redeemed digital copies/digital downloads through iTunes/iTunes store show up in my iTunes purchased movies in the cloud, except this one, "Good Will Hunting."  I got the same message from the iTunes store saying it was successfully redeemed and it downloaded to my iMac but for some reason this is the only movie that is not showing up in my iTunes purchased movies in the cloud and all my other successfully redeemed digital copies/digital downloads are, so I don't know what the problem is at this time.  I hope you can resolve this so that I may enjoy this one from the cloud as I do all my others like this, thank you in advance so very much." 
    I am suppose to hear back from them within 24 hours, I hope it is resolved ASAP.  If I can I'll try to let you know what happens.

  • Cost of Goods Sold Accounts by Region

    Hi Friends,
    While doiing the GL settings base on Item Groups, there is an option to set the Revenue Account based on Domestic.EU.Foreign.
    Bu why is there no Cost of Goods of Sold accounts based on that.
    Is Cost of Goods Sold account use for calculating gross profit. If so it makes sense to have a single Cost of Goods Sold.
    Can anyone correct me if ia m wrong and please explain to me why  Cost of Goods Sold account is not divided in to Domestic, EU, Foreign.
    Further what is the Expenses Account, in GL settings according to Item Groups, mean.
    Thanks & Regards
    Shiva

    Hey Julie,
    We also need to use a different GL account for inter-company and I am wondering where do you setup GL account by warehouse?
    Can you please provide the menu path or transaction code?
    Thanks,
    Kundan

  • Query about Inventory Cost of Goods Sold Account Generator WF Customization

    Hi
    We are trying to Customize the 'Inventory Cost of Goods Sold Account Generator' workflow for our client in Oracle Applications 11.5.10 instance.
    We have successfully uploaded the modified workflow and changed the GL Account Generator Process to point to the Custom Workflow.
    Database is bounced after this change, but the changes are not taking effect.
    Any help in this matter would be greatly appreciated.
    Thanks and Regards

    Hi,
    You shouldn't need to bounce the database for any changes to take affect (although if you were experiencing the "existing state of the packages has been discarded" error then it would clear that).
    Switch on debugging so that the workflow is persisted rather than being run in forced synchronous mode, and then see what route the process is taking. If you open the workflow from the database via workflow builder, are you seeing the correct version?
    HTH,
    Matt
    WorkflowFAQ.com - the ONLY independent resource for Oracle Workflow development
    Alpha review chapters from my book "Developing With Oracle Workflow" are available via my website http://www.workflowfaq.com
    Have you read the blog at http://www.workflowfaq.com/blog ?
    WorkflowFAQ support forum: http://forum.workflowfaq.com

  • OM: Generate Cost of Goods Sold Account problem?

    Hi,
    I have a requirement to set override segment4 of COGS which logic come from Customer Sales Channel lookup values DFF (in this case = 611) if sales channel = "MASS".
    What i did is after Get CCID from the Order Type Id, i created a new function that set the hidden attribute FND_FLEX_SEGMENT4 with the lookup values mention above to override the segment4. Then after that call Validate Code Combination.
    But after debugging the code using cogs_11i.sql from Metalink, segment4 was not get override as shown below :
    New Segment 4 : 611 => come from debug output message
    Return CCID : 151814
    Concat Segments : 3101.3203.02I.212.74010001.000.0000
    May i know how to overcome this problem? Appreciate your help.
    Thanks & Regards,
    Fendy

    Hi,
    Standard workflow "OM : Generate Cost of Goods Sold Account" has following steps:
    1/ Start generating Code Combination
    2/ Get CCID for a line
    3/ Copy Values from Code Combination
    4/ Validate Code Combination
    5/ End generating Code Combination
    If I want to modify the segment4, the custom function to set the attribute FND_FLEX_SEGMENT4 need to be inserted just after the step "Copy Values from Code Combination" (NOT just after "Get CCID for a line").
    Is it what you have done?
    J.

  • Trying to pull in Cost of Goods Sold Account from Master Items.

    Running Oracle EBS 11.5.10.2 on 10.2.0.4 database. I have written item master code and I am now trying to pull in the Cost of Goods Sold Account from the Costing Tab in the Master Items Screen. I was able to join MTL_SYSTEM_ITEMS to GL_CODE_COMBINATIONS. Some of the accounting segments are correct but others are not, which leads me to believe I may not be joining to the correct tables. Any suggestions or hints are appreciated.
    Thank you,
    SELECT MSI.INVENTORY_ITEM_ID                INVENTORY_ITEM_ID    
    , msi.segment1                              ITEM             
    , MSI.DESCRIPTION                           DESCRIPTION
    , msi.inventory_item_status_code            INVENTORY_ITEM_STATUS_CODE
    , msi.item_type                             ITEM_TYPE
    , max (mirb.revision)                       REVISION
    , MSI.PRIMARY_UOM_CODE                      PRIMARY_UOM_CODE
    , msi.shippable_item_flag                   SHIPPABLE_ITEM_FLAG
    , NVL (CIC.ORGANIZATION_ID, '0')            ORGANIZATION_ID
    , NVL (CIC.ITEM_COST, '0')                  ITEM_COST
    , NVL (CIC.MATERIAL_COST, '0')              MATERIAL_COST
    , cct.cost_type                             COST_TYPE
    , MCB.SEGMENT1
                        ,GCC.segment1
                        ,GCC.segment2
                        ,GCC.segment3
                        ,GCC.segment4
                        ,GCC.segment5
                        ,GCC.code_combination_id
    FROM CST_ITEM_COSTS CIC
    , CST_COST_TYPES CCT
    , CST_COST_TYPES CCT2
    , MTL_SYSTEM_ITEMS MSI
    , MTL_ITEM_CATEGORIES MIC
                ,gl_code_combinations GCC
    ,MTL_CATEGORIES_B MCB
    , MTL_DEFAULT_CATEGORY_SETS MDC
    , MFG_LOOKUPS LU1
    , mtl_item_revisions_b mirb
    WHERE CCT.COST_TYPE_ID(+) = CIC.COST_TYPE_ID
    AND CCT2.COST_TYPE_ID(+) = CCT.DEFAULT_COST_TYPE_ID
    AND MSI.INVENTORY_ITEM_ID = CIC.INVENTORY_ITEM_ID(+)
    AND MSI.ORGANIZATION_ID = CIC.ORGANIZATION_ID (+)
    AND MSI.COSTING_ENABLED_FLAG = 'Y'
    AND MIC.INVENTORY_ITEM_ID (+) = CIC.INVENTORY_ITEM_ID
    AND MIC.ORGANIZATION_ID (+) = CIC.ORGANIZATION_ID
    AND MIC.CATEGORY_ID = MCB.CATEGORY_ID (+)
    AND MCB.ENABLED_FLAG = 'Y'
    AND MIC.CATEGORY_SET_ID = 1
                        AND MSI.SALES_ACCOUNT(+) = GCC.CODE_COMBINATION_ID
    AND msi.inventory_item_id = mirb.inventory_item_id
    AND msi.organization_id = mirb.organization_id
    AND LU1.LOOKUP_CODE(+) = MSI.PLANNING_MAKE_BUY_CODE
    /* the outside join below, speeds up query, not sure why */
    AND LU1.LOOKUP_TYPE(+) = 'MTL_PLANNING_MAKE_BUY'
    and cct.cost_type = 'ACTUAL'
    AND msi.organization_id = 4
    group by CIC.ROWID, MSI.INVENTORY_ITEM_ID, MSI.SEGMENT1, MSI.DESCRIPTION, MSI.INVENTORY_ITEM_STATUS_CODE,
    MSI.PRIMARY_UOM_CODE, MSI.SHIPPABLE_ITEM_FLAG, CIC.ORGANIZATION_ID, MSI.ITEM_TYPE, CIC.ITEM_COST, CIC.MATERIAL_COST,
    cct.cost_type, MCB.SEGMENT1, GCC.segment1, GCC.segment2, GCC.segment3 , GCC.segment4, GCC.segment5, GCC.code_combination_id

    Hi,
    You need to replace the join MSI.SALES_ACCOUNT(+) = GCC.CODE_COMBINATION_ID with msi.cost_of_sales_account(+) = GCC.CODE_COMBINATION_ID to get the COGS account. Currently you are getting sales account not COGS.
    Thanks
    Vishalaksha

  • Receiving Error Message : Cost Of Goods Sold Account Generation Failed

    Hi All,
    We need some assistance with this issue...for a given item when the Customer RMA order Line is being received into a given organization/sub inventory/locator we are getting this error message in the Receiving Transactions Interface ( RTI ) as mentioned below.
    Cost Of Goods Sold Account Generation Failed with error :RVTII-030: Subroutine rvtiicreate() returned error
    Cause: Subroutine rvtiicreate() returned an internal error.
    We checked for this item in the organization the Cost of Goods Sold Account has been defined in the Costing Tab in the Item-Org Assignment and this GL account is also enabled on the GL side and is Active.
    The scenario is like this :
    1. Firstly this item is shipped out on an Outbound order line to the customer location and we checked for the valid Sales Order Issue transaction against this item for this order. We checked for its Inventory Distributions as well.. these look to be valid.
    It shows : Inventory valuation account is decremented while the Deferred Cogs of Goods Sold account is incremented.
    2. Then this item is being entered on Return order line and after booking the order line . It goes to Awaiting Return status. Next the user tries to attempt the Receipt for the Customer RMA order line for this item we are getting the error mentioned below in the RTI tables :
    Cost Of Goods Sold Account Generation Failed with error :RVTII-030: Subroutine rvtiicreate() returned error
    Cause: Subroutine rvtiicreate() returned an internal error.
    Coudl someone please assist us with this issue as this is happening in Production instance ..that would be very helpfull of you..
    This is an urgent issue
    thanks

    Hi,
    Standard workflow "OM : Generate Cost of Goods Sold Account" has following steps:
    1/ Start generating Code Combination
    2/ Get CCID for a line
    3/ Copy Values from Code Combination
    4/ Validate Code Combination
    5/ End generating Code Combination
    If I want to modify the segment4, the custom function to set the attribute FND_FLEX_SEGMENT4 need to be inserted just after the step "Copy Values from Code Combination" (NOT just after "Get CCID for a line").
    Is it what you have done?
    J.

  • HOW the cost of good sold account is l liked with GL code_combination_id

    Can any one pass the query how the cost of good sold account is l liked with GL code_combination_id

    Like any other GL code, i.e.:-
    select code_combination_id
    from gl_code_combinations
    where segment1 = ’01’
    and segment2 = ’540’
    and segment3 = ’5360’
    and segment4 = ’0000’
    and segment5 = ’000’
    -- etc. according to how your COA is structured
    and chart_of_accounts_id = +{ your COA id }+;
    Regards,
    Jon

  • Hi I Have A Prepaid SmartPhone Right Now With Verizon For About 7-Months So Far. I Have Always Paid On Time No Missed Payments Good Standing Account, I Tried To Switch Over To A 2-Year Contract With Verizon And They Wanted A $400 Deposit For Only 1-Line.

    Hi I Have A Prepaid Smart Phone Right Now With Verizon For About 7-Months So Far. I Have Always Paid On Time No Missed Payments Good Standing Account, I Tried To Switch Over To A 2-Year Contract With Verizon And They Wanted A $400 Deposit For Only 1-Line. Is There Anyway I Can Use My Excellent Payment History With There Prepaid Department To Switch To A 2-Year Contract And Not Have To Pay The $400 Deposit. And This Is Due To The Fact I Have No Credit History Whatsoever

    Since you have no credit history, my guess is you would need at least a year of on time payments, and I'm not sure a pre-paid account would qualify as you can stop at any time. 
    You didn't specify your age, but getting started int he credit world is not easy - you may try applying for a gas card, or a credit card, and USE them, pay them off each month - and expect to take a year or more to establish a record. 

  • Urgent help!!  how to cal Good will in HFM?

    Hi Professionals,
    I need urgent help from you. I would like to know how to calculate Good will % from ownership.
    I dint work on tht before. And i posted this query before but dint not get any answer.
    Thanks in Advance
    Edited by: 897162 on Nov 27, 2011 1:56 AM

    Hi
    I found a thread in this forum on "Ownership calculation" which also talking about the good will calculation.
    Ultimate Ownership calculation in HFM
    This could give some idea.
    thank you
    Regards,
    Mahe

Maybe you are looking for