Revaluation error"posting are in batch input session"
HI All,
we are using 6.0 version and user has executed revaluation for FEB month,they were practised to use the online postings, but when they excute the revaluation there was an error message for 3 accts " valauation kept in batch input session "and accounts determination is missing for these accounts" and when we check the batch input session using SM35 there is no session with error. How to work on this ?
Is there any particular transaction where we can check the batch input session and execute once the accounts are assigned ?
Plz advice us, and is necessary for closing the month end activity.
best Regards
Stephen
Execute the session either online or in display error mode. This will give you the exact point of error and also you will be able to get detailed error message.
Regards
Rakesh Pawaskar
Similar Messages
-
Error while Running BRS Batch input session
Dear Gurus,
When i am running Batch input session after BRS statement posted, system giving Error message:
<b>No batch input data for screen SAPDF05X 3100</b>
Entered, saved and posted the statement. after that while processing session getting error like this........How to overcome.
Can we post statement directly without creating session.
Regards,
VenkatHi,
The ABAP Counterpart has to build an exception handling for this particular message.
Normally these messages occur either after an upgrade or after a change in the account(different filed status)
Provide points if usefull.
Thanks,
Praveen -
LSMW - Error in Inventory - Create batch input session
Hello good day.
I'm trying to create a batch input session for inventory upload (Standard Batch Input program - RM07MMBL) and when I select the Name of logical file = "MM_INVENTORY_MANAGEMENT_GOODS_MOVEMENT" and press F8, the following error occurs:
<b>Sequential file mmgoods cannot be opened
Message no. M7 850</b>
Now as the legend says.... I've contacted my system administrator and he keeps telling me everything is ok, but the error keeps appearing, where can I see if I have authorization for this "file" ???
Where is it created ??
I need more info on this.
Your help is very much appreciated.
Thank you.
Juango to file transaction n check for the logical file path and logical file weather it is defined correctly r not?
if it is correctly defined check for the file, weather the flat file is defined at the correct location which is defined in the logical file path
u can refer the below link also
Re: Logical file
Regards,
Naveen -
How to handile errors in batch input(session)method
Hi Friends..
How to <b>Re upload the error records</b> in batch input(session)method in BDC Programming?
Regards
D BabuHi
U can do it manually by SM35: the wrong trxs can be run again.
If you want to do automatically I don't think you can do it easyly, because to know if a record was loaded successfully depends on how you have loaded it and your data source .
For example:
if the records have to be loaded are from a file and every record is a trx, you could re-read the file and match it with session log:
Log--Result--
Record file
Trx 1 OK 1
Trx 2 OK 2
Trx 3 KO 3 (Re-load it)
Trx 4 OK 4
Trx 5 KO 5 (Re-load it)
Trx 6 OK 6
How to read session log see trx sm35
Max -
RFUMSV50- Error during batch input session
Hello Experts,
I am getting an error after creation of batch input session for program RFUMSV50.
If I run the session in foreground it gives velow error
program successfully worked 3 months back without any error but after that I am facing this type of issues.
Can anyone please guide what exactly missing in the configuration.
Regards,
psHi Salvatore,
I'm in the same situation. I execute a BI, but it stops after a waring appears.
If I proceed the transaction manually, the warning appears, but if I press ENTER the transaction ends successful.
Did you solved your Problem or did you have an hint for me.
Kind regards
Yvonne Adler -
LSMW- Batch Input session getting error
Hi All,
I created LSMW object for Tcode KO01 and its creating the Internal order as expceted.But even after creating the document the Batch Input session status is showing incorrect.No messages are also displayed in the log.
Please let me know why this is happening.
Thanks in Advance,
SavithaHi,
Detail Error Message is as follows:
No batch input data for screen SAPLIMR0 1110
Message no. 00344
Diagnosis
The transaction sent a screen that was not expected in the batch input session and which therefore could not be supplied with data.
Possible reasons:
1. The batch input session was created incorrectly. The sequence of screens was recordly incorrectly.
2. The transaction behaves differently in background processing in a batch work process than when running in dialog (SY-BATCH is queried and changes the screen sequence).
3. The transaction has undergone user-specific Customizing and therefore certain screens may be skipped or processed differently, according to the current user. If the person who created a batch input session is not the same as the person now processing it, this problem may occur frequently.
System Response
None.
Procedure
For 1: Either re-create the session or process it in expert mode. Correct the batch input program.
For 2. It is very difficult to analyze this problem, particularly in the case that the screen sequence or the display-only options of fields differ according to whether the transaction is being processed in the background or as an online dialog. It could also be that this kind of transaction cannot run with batch input.
For 3: Have the creator of the session process it. If no error occurs now, then this is a program with user-specific Customizing.
Regards,
ababfk -
Update error after all screens in Batch Input session is processed.
Hi,
I have a problem in processing the batch input session. The batch input session is calling F-02 to post less than 999 line items (around 700) to a single financial document. The batch session is expected to have an error because tax code is missing for some line items but even after the tax code is added manually onto the batch screen, the update error message still happened at the end of the process. In the log, it said "System error: Error when inserting table BSET". Same account has been used to post 10+ line items manually with F-02, no error occurred.
Does anyone have any idea what possible reason could cause the update error in updating the tax table?Hi Rob,
That is exactly what happened to us. We already had note 521481 in our system but we also have OSS 558288 in which causes our scenario not generating an error message but an update termination instead.
The other thing I found out is once tax code is entering in one of the line items, it will be copied to all the succeeding line items even for the accounts that does not require a tax code (i.e. posting without tax code allowed checked) which will significantly increase the amounts of data posted into BSET.
We fixed the issue by changing the BDC program so it will take out the auto-copied tax code from other line items. Issue is solved. Thank you. I also rewarded the points.
Minami -
Batch Input Session empty while posting Manual Bank Statement T.Code FF67
Hi Experts,
I am trying to do the Bank Reconciliation by T.Code FF67.
The statement is getting saved but I could not see the Batch Insput Session (T.Code SM35) to post the entries.
Please help me in this issue.
Thanks in advance
PriyaHi,
Saving Bank Statement Data and Posting Statement are two different transactions.
Once both amounts (in FF67, Amounts Entered, Statement Amount at the bottom) are matched then if you save, it will save the data in FF67 format. In that screen only if you save again then it will post statement and create batch input session. Similarly you also processed or differently?
Check again in FF67 statement screen & revert back.
Sarma BH -
What are the problems in processing batch input sessions?
hi,
What are the problems in processing batch input sessions? How is batch input process different from processing on line?
regards.sorry, question resolved.
-
Batch Input Session for Errors
Hello
I'm running a Batch Input (in a FM) and I want to create a session for records with errors. In case of error (output parameter of the FM subrc NE 0) I send it to that session for later running.
Can you explain how do I do this? Thanks!hi,
Look at the sample program
REPORT Z_BDC_CUSTOMER_R07
NO STANDARD PAGE HEADING LINE-SIZE 255.
INCLUDE Z_CUSTOMER_BDC_R02.
*-----AT SELECTION-SCREEN
AT SELECTION-SCREEN.
IF SY-UCOMM = 'ONLI'.
*-----group and user must be filled to create a session
IF SESSION = 'X' AND
GROUP = SPACE OR USER = SPACE.
MESSAGE E613(MS).
ENDIF.
*----Presentation File name should be entered
IF SESSION = 'X' AND RB_PRE = 'X'
AND P_FILE = '' .
MESSAGE E004(ZROJA).
ELSEIF CTU = 'X' AND RB_PRE = 'X'
AND P_FILE = '' .
MESSAGE E004(ZROJA).
ENDIF.
*----Application File name should be entered
IF SESSION = 'X' AND RB_APP = 'X'
AND P_FILE_A = '' .
MESSAGE E004(ZROJA).
ELSEIF CTU = 'X' AND RB_APP = 'X'
AND P_FILE_A = '' .
MESSAGE E004(ZROJA).
ENDIF.
ENDIF.
*-----AT SELECTION-SCREEN OUTPUT
AT SELECTION-SCREEN OUTPUT.
*----When file from Presentation server is selected
IF RB_PRE = 'X'.
*----To make the application server inactive
LOOP AT SCREEN.
IF SCREEN-GROUP1 = 'AAA'.
SCREEN-ACTIVE = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ELSE.
*----When file from Presentation server is selected
RB_APP = 'X'.
*----To make the application server inactive
LOOP AT SCREEN.
IF SCREEN-GROUP1 = 'BBB'.
SCREEN-ACTIVE = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
*-----AT SELECTION-SCREEN ON VALUE-REQUEST
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE_A.
CALL FUNCTION 'F4_DXFILENAME_TOPRECURSION'
EXPORTING
I_LOCATION_FLAG = 'A'
I_SERVER = ' '
FILEOPERATION = 'R'
IMPORTING
O_PATH = P_FILE_A
EXCEPTIONS
RFC_ERROR = 1
ERROR_WITH_GUI = 2
OTHERS = 3.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*-----AT SELECTION-SCREEN ON VALUE-REQUEST
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
*-----Function module for value-request
CALL FUNCTION 'F4_FILENAME'
EXPORTING
PROGRAM_NAME = SYST-CPROG
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = ' '
IMPORTING
FILE_NAME = V_FILE_NAME.
*----Assigning the flatfile to parameter
P_FILE = V_FILE_NAME.
*-----START-OF-SELECTION
START-OF-SELECTION.
DATA: FILENAME TYPE STRING.
*----When file from Presentation Server is selected
IF RB_PRE = 'X'.
FILENAME = P_FILE.
*-----Function module to upload data from the presentation server
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = FILENAME
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
TABLES
DATA_TAB = IT_KNA1
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ELSE.
*----Upload the File from Application Server
OPEN DATASET P_FILE_A FOR INPUT IN TEXT MODE ENCODING DEFAULT.
*-----to display an error if the file is not in application server
IF SY-SUBRC NE 0.
MESSAGE E006(ZROJA).
ELSE.
DO.
READ DATASET P_FILE_A INTO X_KNA1.
IF SY-SUBRC EQ 0.
APPEND X_KNA1 TO IT_KNA1.
ELSE.
EXIT.
ENDIF.
ENDDO.
ENDIF.
CLOSE DATASET P_FILE_A.
ENDIF.
*-----To open a batchinput session
IF SESSION = 'X'.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
CLIENT = SY-MANDT
GROUP = GROUP
KEEP = KEEP
USER = USER
PROG = SY-CPROG
EXCEPTIONS
CLIENT_INVALID = 1
DESTINATION_INVALID = 2
GROUP_INVALID = 3
GROUP_IS_LOCKED = 4
INTERNAL_ERROR = 6
QUEUE_ERROR = 7
RUNNING = 8
SYSTEM_LOCK_ERROR = 9
USER_INVALID = 10
OTHERS = 11.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
*-----Filling the BDCDATA using the Internal Table
LOOP AT IT_KNA1 INTO X_KNA1.
PERFORM BDC_DYNPRO USING 'SAPMF02D' '0100'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'RF02D-KTOKD'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_FIELD USING 'RF02D-KUNNR'
X_KNA1-KUNNR.
PERFORM BDC_FIELD USING 'RF02D-KTOKD'
X_KNA1-KTOKD.
PERFORM BDC_DYNPRO USING 'SAPMF02D' '0110'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'KNA1-SPRAS'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_FIELD USING 'KNA1-NAME1'
X_KNA1-NAME1.
PERFORM BDC_FIELD USING 'KNA1-SORTL'
X_KNA1-SORTL.
PERFORM BDC_FIELD USING 'KNA1-ORT01'
X_KNA1-ORT01.
PERFORM BDC_FIELD USING 'KNA1-PSTLZ'
X_KNA1-PSTLZ.
PERFORM BDC_FIELD USING 'KNA1-LAND1'
X_KNA1-LAND1.
PERFORM BDC_FIELD USING 'KNA1-SPRAS'
X_KNA1-SPRAS.
PERFORM BDC_DYNPRO USING 'SAPMF02D' '0120'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'KNA1-LZONE'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_FIELD USING 'KNA1-LZONE'
X_KNA1-LZONE.
PERFORM BDC_DYNPRO USING 'SAPMF02D' '0125'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'KNA1-NIELS'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_DYNPRO USING 'SAPMF02D' '0130'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'KNBK-BANKS(01)'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=ENTR'.
PERFORM BDC_DYNPRO USING 'SAPMF02D' '0340'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'RF02D-KUNNR'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=ENTR'.
PERFORM BDC_DYNPRO USING 'SAPMF02D' '0370'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'RF02D-KUNNR'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=ENTR'.
PERFORM BDC_FIELD USING 'KNA1-CIVVE'
'X'.
PERFORM BDC_DYNPRO USING 'SAPMF02D' '0360'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'KNVK-NAMEV(01)'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=ENTR'.
*----If Session is selected
IF SESSION = 'X'.
*----To insert data into batch input session
CALL FUNCTION 'BDC_INSERT'
EXPORTING
TCODE = 'XD01'
TABLES
DYNPROTAB = IT_BDCDATA.
REFRESH IT_BDCDATA.
AT LAST.
SKIP.
WRITE:/ TEXT-001.
ENDAT.
ELSE.
*----Calling the transaction
CALL TRANSACTION 'XD01' USING IT_BDCDATA
MODE CTUMODE
UPDATE CUPDATE
MESSAGES INTO IT_BDCMSGCOLL.
CLEAR IT_BDCDATA.
REFRESH IT_BDCDATA.
ENDIF.
ENDLOOP.
*----If Session is Selected
IF SESSION = 'X'.
*----To close the session
CALL FUNCTION 'BDC_CLOSE_GROUP'
EXCEPTIONS
NOT_OPEN = 1
QUEUE_ERROR = 2
OTHERS = 3.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
*-----END-OF-SELECTION
END-OF-SELECTION.
*----To display the success messages
LOOP AT IT_BDCMSGCOLL INTO X_BDCMSGCOLL WHERE MSGTYP = 'S' .
*-----If Message Type Differs
ON CHANGE OF X_BDCMSGCOLL-MSGTYP.
WRITE:/ TEXT-002.
SKIP.
ULINE (58).
WRITE:/01 SY-VLINE,02 TEXT-003,
14 SY-VLINE,15 TEXT-004,
21 SY-VLINE,22 TEXT-005,
35 SY-VLINE,36 TEXT-006,
58 SY-VLINE,/01 SY-ULINE(58).
ENDON.
WRITE:/01 SY-VLINE,02 X_BDCMSGCOLL-MSGTYP,
14 SY-VLINE,15 X_BDCMSGCOLL-TCODE,
21 SY-VLINE,22 X_BDCMSGCOLL-MSGV1,
35 SY-VLINE,36 TEXT-007,
58 SY-VLINE,/01 SY-ULINE(58).
ENDLOOP.
SKIP 2.
*----To display the error messages
LOOP AT IT_BDCMSGCOLL INTO X_BDCMSGCOLL WHERE MSGTYP = 'E'.
*-----If Message Type Differs
ON CHANGE OF X_BDCMSGCOLL-MSGTYP.
WRITE:/ TEXT-008.
SKIP.
ULINE (58).
WRITE:/01 SY-VLINE,02 TEXT-003,
14 SY-VLINE,15 TEXT-004,
21 SY-VLINE,22 TEXT-005,
35 SY-VLINE,36 TEXT-006,
58 SY-VLINE,/01 SY-ULINE(58).
ENDON.
WRITE:/01 SY-VLINE,02 X_BDCMSGCOLL-MSGTYP,
14 SY-VLINE,15 X_BDCMSGCOLL-TCODE,
21 SY-VLINE,22 X_BDCMSGCOLL-MSGV1,
35 SY-VLINE,36 'Customer Already Exits',
58 SY-VLINE,/01 SY-ULINE(58).
ENDLOOP.
*-----FORM fill_bdcdata
FORM FILL_BDCDATA USING L_DYNPRO TYPE ANY
L_FNAME TYPE ANY
L_FVALUE TYPE ANY.
CLEAR X_BDCDATA.
IF L_DYNPRO = 'X'.
X_BDCDATA-DYNBEGIN = 'X'.
X_BDCDATA-PROGRAM = L_FNAME.
X_BDCDATA-DYNPRO = L_FVALUE.
ELSE.
X_BDCDATA-FNAM = L_FNAME.
X_BDCDATA-FVAL = L_FVALUE.
ENDIF.
APPEND X_BDCDATA TO IT_BDCDATA.
ENDFORM. "BDC_FIELD
*-----Start new screen
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR IT_BDCDATA.
IT_BDCDATA-PROGRAM = PROGRAM.
IT_BDCDATA-DYNPRO = DYNPRO.
IT_BDCDATA-DYNBEGIN = 'X'.
APPEND IT_BDCDATA.
ENDFORM. "BDC_DYNPRO
*-----Insert field
FORM BDC_FIELD USING FNAM FVAL.
IF FVAL <> SPACE.
CLEAR IT_BDCDATA.
IT_BDCDATA-FNAM = FNAM.
IT_BDCDATA-FVAL = FVAL.
APPEND IT_BDCDATA.
ENDIF.
ENDFORM. "BDC_FIELD -
Batch Input Session - Display Error Only - SM35
Dear all,
Need to do material master extension in MM01 and considering batch input session using mode 'display error' only.
However,do have a concern on its performance or run time. In SM35, running in display error only mode - will there be any time out error like the ones encounter in abap reporting ?
This is because, we will be dealing with a huge volume of data (round 2,000). Therefore would like to know, if there would be any possibility that the bdc session in sm35 will experience a time out or not .
Appreciate it if you could shed some lights on this. Thanks in advance.Hello there,
Executing MM01's batch job in background wasn't really an option. This is because, this error was encountered "Control Framework: Fatal error - GUI cannot be reached".
Had done a search on this -- and it indicates that in background mode there isn't GUI involved. Searched result also shows that this error appears when its comes to screens with text ie. Purchase Text or Sales text. Nope, no BDC on entering text involved.
http://www.sapfans.com/forums/viewtopic.php?f=13&t=164902&hilit=ControlFramework%3AFatalerrorGUIcannotbe+reached
Therefore the option am considering is executing the batch job in "Display Error Only". Nonetheless, am not too sure if this will cause time out. The other reason as to this option is that -- we initially introduced CALL TRANSACTION for extending material in MM01. However, functional feedback that it was slow.
Kindly advise - thanks in advance. -
PIR - LSWM Error in create batch input session
Hi
i made a conversion program Purchasing info record through Standard object / Direct Input in that Step 13 : Create Batch input session when i execute the Batch Input session i am getting the following error message
Transaction 00000001 : no transaction code transfered.
Please help me to solve this issue
Thanks & Regards,
mani.Hi
Everything is working perfectly till STEP 10 : " Display Read Data"
once if i convert it it was not populating the correct one. i cant find the T.Code ,Material Number & Indictor for Purchasing Info record.
Please help me to solve thi s issue
Thanks & Regards,
Mani. -
Error in generating Batch Input session from FF67 Transn
Hi Folks,
I have tried to create the batch input session from transaction FF67 (Process manual bank statement ) using the menu path settings-->specifications and chosen the option 2 for Processing type, after posting the statement manually, batch is not getting created, is there any settings to be configured apart from this, any help would be highly rewarded.
Thanks in Adv.
Rgds,Hi Dudes,
Any hint on this issue would be highly helpful ,
Thanks in Advance,
Rgds, -
Batch input session from F.05 has an 'in processing' status
Hello all,
We would like to ask for advice regarding an issue that we are facing right now. We ran F.05 on 9/30/2008. This transaction should create a batch input
session and post revaluation at the end of the month and eventually
reverse them at the beginning of the next month. Unfortunately, as of
the date of the run, period 10 was not yet open. So, the results are
the following:
The batch input created, until now, has an 'in processing' status. 70
transactions were supposed to be processed (but not sure if this is
already the total or it still has some more to process -since we do not
have a record of the supposed number of postings). Now, period 10 is
already open and we are trying to reprocess the session, but it can't
be because of its status.
Looking at the transactions: total is 70 (but not sure if there are
still more to be processed supposedly). 35 transactions (pertaining to
the revaluation postings at the end of the month) have been processed and
their revaluation documents were already produced. 35 transactions (pertaining to the
supposed reversal on the first day of October) are in error because
period 10 was not yet open as of run date. No logs have been created (blank).
In the meantime, can we post manual reversals in October for the revaluation postings made in September? Is there a possibility that there are still revaluations to be processed for September? Let's say, instead of only 35, there are still more? Or another option: could we manually reverse the revaluation postings on September 30 and post on the same date, delete the batch input session (can it be deleted despite the status?), then run the revaluation transaction again for September?
Thanks in advance for your advice.
Regards,
PeterHi Peter,
Go to SM35 > Select the session in process > Release session (Shift + F4)
Now select the session again from "Overview" and process again in order to process the remaining documents. Ensure the period is opened.
This should resolve the issue. Let me know how it goes.
Rgds
Nadini -
RFBIBL00 - issue in Batch Input Session created
Hi Experts,
I am Posting a document thru FB01, for this I am using RFBIBL00 and RSBDCSUB programs to create a Batch Input Session,
I have filled all the required fields for structures BBPKF, BBSEG and BBTAX, but the session created is not processed successfully, while processing it in Foreground, I am getting a Message saying 'No batch input data for screen SAPLKEAK 0300 '.
Can anyone please help me on this.Hi Experts,
Now I have 2 errors in the Batch Input Session Log,
1. Field COBL-PRCTR(Profit Center). does not exist in the screen SAPLKACB 0002
2. Field DKACB-XERGO(Details - Its a check box in the screen). does not exist in the screen SAPLKACB 0002.
But I can see that these filelds are existing in the screens, can anyone let me know why this error occurs.
This is occuring after COPA generation with new fields.
I am trying for a OSS Note also, but I am not getting any. Please help.
Maybe you are looking for
-
Can't see external drive for movie import
Hi gang, I have all of my iMovie projects on an external hard drive plugged directly by Firewire 2 into my MacPro. When I run iMovie 9.09, I get a beautiful sorted list of all of my projects by year. When I run iMovie 10.0.5., I can't even see the
-
How to Specify URL in Safari Command Line?
I would expect that this would work: safari www.google.com but it does not. Is there some kind of option switch needed? Thanks -- Vincent Windows XP Pro
-
Why are these SQL Exceptions coming?
I have developed a web based application in which I am experiencing two exceptions coming after a periodic time. 1)Exception : java.sql.SQLException: ORA-01000: maximum open cursors exceeded 2)Exception : java.sql.SQLException: The url cannot be null
-
Windows could not start the distributed transaction coordinator service on local computer
Dear All, I'm having an issue starting the DTC service in windows 7 OS. I always got the error message below when im trying to start it. "Windows could not start the distributed transaction coordinator service on local computer" Thanks, Melvin
-
Wondering about java virtual machine
hey i just need to download and install java virtual machine so i can chat on this certain page. i tried doing the chat, and it tried downloading what i need, but that didnt work, the download box just completes the download and then nothing happens.