Revaluation not possible while running MFN1

Hi all:
I'd like to revaluate the product order cost using MFN1, however got the following message,
could you please give me a solution? thank you very much!
Revaluation at actual prices not possible in version 0, fiscal year 2009
Message no. KI760
Diagnosis
A revaluation for actual prices is not possible since this function is not available in version 0 in fiscal year 2009.
Procedure
Maintain the corresponding indicator in your version.

HI,
Please check in t code OKEQ, version 0, 4th column "ACT" is checked or not.
And go to controlling area setting and check the same in same OKEQ screen.
And check under the "Setting for Each fiscal year" with 2009 and "Vension for INd.act.Alloc." is maintained with ZERO.
Please let us know if you still face the issue.
Vijay

Similar Messages

I have got an IPhone 5. It has been locking itself and not possible to run it again. I have restored it by Itunnes. But still not functioning. I have bought it from London whitecity applestore and have been using it in Turkey. Any suggestion ?

I have got an IPhone 5. It has been locking itself and not possible to run it again. I have restored it by Itunnes. But still not functioning. I have bought it from London whitecity applestore and have been using it in Turkey. Any recomandation ?

Sorry, but the warranty for the phone is only valid in the country where you bought the device, and you can't send it in, Apple does not ship internationally.
Has the phone been officially unlocked? Only the carrier can unlock an iPhone.
iPhone: About unlocking

With hoding Tax type is not defined while running he TDS inconsistency

Dear Experts
While running the TDS inconsistency program (RFWT0010) for a vendor group ranging from 1 to zzzzzzzzzzz in company code , I am getting an error that "Withholding tax type is not defined".
Can anybody please help me how to solve this issue.
Thanks in advance.
Points will be awraded.
Regards.
skpatra

Hello Surendra,
For TDS calculation WHT Code and Type are plays a major role in TDS.
In your case, you are not defined wht type in your system without this how system calculates tds. So, you should create type and code and assigned the same to concerned vendor master. For wht type path is
Spro>FA>****>wht>ewht>calculation>wht type for paymentj and inovice posting
If you want to more on this pl feel free to ask us
Thanks
Para

Account determination for entry C002 ZF2 X001 not possible while doing GR

Hi,
I am facing problem while GR (MIGO) and error: Account determination for entry C002 ZF2 X001 not possible
Scenario: Client wants to capture for transport cost while doing the GR by using material group (without material).
Steps:
1. Purchase order (ME21N):
By using account assignment category K u2013 Cost centre, material group (without material) and fright condition
(Account determination: Account key FRE and Accruals ZF2)
2. GR (MIGO): error: Account determination for entry C002 ZF2 X001 not possible
Configuration made:
1. Assing material group to valuation class (OMQW)
Material group - 600000020 Office BOOKS to Valuation class Y170 BOOKS
2. Account determination for valuation class (OMWD):
Valuation area X001 - VGCd X001
3. Automatic account determination (OBYC):
FRE u2013 X001(VGCd) - Y170 (VC) u2013 606400000 (GL)
ZF2 - X001(VGCd) - Y170 (VC) u2013 408300000 (GL) (This is Z transaction key to capture transport cost).
For ZF2 transaction key above configuration was attached and still I am getting error.
Did I miss any other configuration?
Thanks in advance for suggestion.

Based on the Error message, i think account determination is not looking for valuation class Y170. This is normally included in the error message, so i think you should maintain FRE and ZF2 with valuation class as 'blank'.
Regards,
Ganesh

Timer not expired while running process

Dear All
I'm using timer to blink the text message in 6i forms.Its working fine.
But the problem is while running process timer not expired.
If there is any solution to expire timer while running process, please let me know
Thanking you

As I understood you want to expire the timer in a specific time.
you can call SET-TIMER with NO_REPEAT Indicates that the timer should not repeat upon expiration, but is to be used once only, until explicitly called again.
You can call it every time that you want

Accounting exchange rate not picking while running result analysisKKA2

Hi All,
WHile running Result analysis with KKA2 the accounting exchange rate not picking correctly.
When we run the KKA2 from may to sep it is taking may month as default rate and it is extending to june aug,sep instead of seperate exchange rates for each month.
We compared all configurations for this RA key with existed RA key .All the setting are one and the same.in OKG2,OKG3,OKG4,OKG5
PLease help ...
Regards,
Mohan

Hi srikanth,
It is not daily exchange rate.
Actually we copied PS LCR RA key to PS IAS.
PS LCR is working fine and it is picking correctly for the respective months.
Where as In PS IAS it is taking starting month and same continuing for other consecutive months.
Regards,
Mohan

Error : Modification not possible- while creating source system in BI7

Hi BI Guru's,
We are using BI7 and source system ECC6 ,We are about to move to production, When creating the source system in BI PRD system we getting the Error Modification not possible.we created RFC connection, background user and remote connection works fine.
Is there any body put some light on this issue
thanks in advance,
Regards,
Mohan

Mohan,
Check if your logical systems are in place in SCC4 and also in the transport connection.
Also check if you are connecting to the source system by IP Address or by logical name.
Accordingly you would have to maintain the source system connections.
Arun

Not possible to run CodedUI tests on Windows 7 embedded

Hi all,
I am trying to get my CodedUI tests running on the target machine with Windows 7 Embedded.
For that, I installed on the target machine:
Visual Studio 2010 Test Agent
VS2010 SP1
Next I try to run the CodedUI test from the command line using mstest.exe (since no Visual Studio may be installed on target
machine). However, before even executing the first line of code in my test, mstest fails after showing a popup window with following message:
"the ordinal 459 could not be located in the dynamic link library urlmon.dll"
When looking in the detailed logs of QTAgent32.exe I see a 'System.BadImageFormatException' thrown by the PluginManager of CodedUI when trying to
start an Internet Explorer plugin. See detailed stacktrace below this message.
This might be caused by the fact that this Windows Embedded installation does not contain Internet Explorer (for security reasons). The CodedUI test
and application under test however do not need Internet Explorer at all, the application is a WPF application.
So, my questions:
- Does anyone know how to get rid of this error without installing Internet Explorer?
- Any ways to prevent MsTest.exe to start the IE extension for a CodedUI test?
Some things I tried already but did not bring success:
- Run a completely empty CodedUI test; it triggers the same error.
- Remove IE extensions from C:\Program Files (x86)\Common Files\Microsoft Shared\VSTT\10.0
- Remove unneeded things (datacollectors) from MsTestSettings file.
Any help/ideas appreciated!
Jan Lavrijsen
Complete stack trace:
Agent: adapter run thread for test 'CutPowerDuringImport' with id 'b7c688eb-89ac-4654-b638-a5699f579871'
»DebugInfo
»Trace »FirstChanceException
»FirstChanceException 'Microsoft' causing 'System.BadImageFormatException' - Retrieving the COM class factory for component with CLSID {25336920-03F9-11CF-8FD0-00AA00686F13} failed due to the following error: 800700b6 The operating system
cannot run . (Exception from HRESULT: 0x800700B6).
»[CausedBy=Microsoft],[FirstChanceException=System.BadImageFormatException],[Count=1]
»CallStack: at Microsoft.VisualStudio.TestTools.UITest.Extension.IE.IETestPlugin.StartSession(System.Boolean recordingSession) [IL: 0x19][Native: 0x4B]
at Microsoft.VisualStudio.TestTools.UITest.Framework.UITestPluginManager.StartSession(System.Boolean recordingSession) [IL: 0x2B][Native: 0x95]
at Microsoft.VisualStudio.TestTools.UITest.Framework.UITestService.StartSession(System.Boolean recordingSession) [IL: 0x34][Native: 0xA9]
at Microsoft.VisualStudio.TestTools.UITesting.Playback.StartSession() [IL: 0x37][Native: 0x6C]
at Microsoft.VisualStudio.TestTools.UITesting.Playback.Initialize() [IL: 0xB5][Native: 0x163]
at Microsoft.VisualStudio.TestTools.UITesting.CodedUITestExtensionExecution.BeforeTestInitialize(System.Object sender,Microsoft.VisualStudio.TestTools.UnitTesting.BeforeTestInitializeEventArgs e) [IL: 0x3C][Native: 0x76]
at Microsoft.VisualStudio.TestTools.TestTypes.Unit.UnitTestExecution.RaiseBeforeTestInitialize(Microsoft.VisualStudio.TestTools.UnitTesting.BeforeTestInitializeEventArgs args) [IL: 0x15][Native: 0x17]
at Microsoft.VisualStudio.TestTools.TestTypes.Unit.UnitTestExecuter.RunInitializeMethod() [IL: 0x3E][Native: 0x96]
at Microsoft.VisualStudio.TestTools.TestTypes.Unit.UnitTestExecuter.ExecuteTest() [IL: 0x8D][Native: 0x113]
at Microsoft.VisualStudio.TestTools.TestTypes.Unit.UnitTestExecuter.Execute(Microsoft.VisualStudio.TestTools.TestTypes.Unit.UnitTestResult result) [IL: 0x46][Native: 0xD1]
at Microsoft.VisualStudio.TestTools.TestTypes.Unit.UnitTestRunner.ExecuteSingleTest(Microsoft.VisualStudio.TestTools.TestTypes.Unit.UnitTestExecuter executer,Microsoft.VisualStudio.TestTools.TestTypes.Unit.UnitTestElement test,Microsoft.VisualStudio.TestTools.Execution.ITestContext
testContext,Microsoft.VisualStudio.TestTools.TestTypes.Unit.UnitTestAdapterContext userContext,System.Boolean isLoadTest) [IL: 0x27][Native: 0x55]
at Microsoft.VisualStudio.TestTools.TestTypes.Unit.UnitTestRunner.Run(Microsoft.VisualStudio.TestTools.TestTypes.Unit.UnitTestElement test,Microsoft.VisualStudio.TestTools.Execution.ITestContext testContext,System.Boolean isLoadTest,System.Boolean
useMultipleCpus) [IL: 0x109][Native: 0x32B]

Hi Jan,
Thanks for your response:)
I think it is a good feedback for this issue, but as far I know, it is by design now, we need to use the IE extension for test projects. My understanding is that it would find the accordant UI Test Controls with your app UI controls, so it would search all
test controls include the IE controls, and then use one real UITestControl to instantiate an object which is equal to the real UI control, so we could playback the recorded action.
WinButton uICloseButton = this.UISnippingToolWindow.UISnippingToolTitleBar.UICloseButton;
But I think you can submit this feedback to Microsoft Connect feedback portal:
http://connect.microsoft.com/VisualStudio/feedback/CreateFeedback.aspx,maybe
Microsoft engineers will share us a more plausible explanation.
Thanks for your understanding.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Error - Object variable or with block variable not set while running report

Hi,
I am trying to run BEx reports through portal.
However I am not able to run any report. I am getting following error.
"Run time error '91':
Object variable or with block variable not set"
This is not BEx installation or excel issue as I am not able to run reports using someone else's desktop also.
Also I have authorization to those reports. So doesn't seem to be authorization issue.
Please help me to resolve this problem.
Thank you in advance.
Regards,
Deepti Jain.

Hi Deepti,
Can i knw how you solved this issue?
Regards,
Maili

Error 404--Not Found - while running report in 11g

Dear All ,
I have my oracle application in 10g R1. Now we are migarting that to 11g .
There is a temporary directory where we are generating report output (PDF)
we are using an alias name web_reps for this folder .
Given the AliasMatch in forms.conf and in registry given the alias name for FORMS_MAPPING .
It was working with 10g . Tried the same in 11g so that report is generating in the folder (PDF)
but while openeing the file using web.showdocument () using the alias name it is giving the below error .
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
If any body know this issue pls help .
Thanks
Jyo

Are you using apache in front of your weblogics, or just plain weblogic? Also please post the full version of your 11g installation (11.1.1.x or 11.1.2.x). If you are using no apache and the 11.1.1.x version for development (without apache) the forms servlet and the reports servlet are deployed on different weblogic instances running on a different port; meaning forms is available under e.g.
http://ias:9001/forms/frmservlet
whereas reports is available under
http://ias:9002/reports/rwservlet
but when running reports via web.show_document it assumes both are running on the same port. Also make sure your weblogic instances are up and running. So either you use apache for production (in 11.1.1.x or 11.1.2.x) or you go for 11.1.2 in development where the forms and the reports servlets are deployed on the very same port. As far as I am concerned I'd go for 11.1.2 as the production environment is nothing different from 11.1.1 and the development environment is a hell of a lot easier to install.
cheers

Excel file not created while running application using executable on different PC

Hi,
I have created an executable and an installer for an application. In this application I am saving data to an excel file using a template. This works fine when I run using the executable on development PC. However when I deploy this application on another PC, excel application opens the template and writes the data but the file is not saved or created at the desired destination.
The path for file to be saved is coming up right but no file is saved.
Development Machine details:
OS: Windows 7
Office version: 2010 (but I am saving file in 97-2003 format)
LV version: 2012
I had checked 'Unlock' option while building the application but stil faced the same issue

This error means that the VI which is downloaded to the FPGA was changed on the host/development system, but has not been recompiled. By recompiling it you resolve this problem.
When a LabVIEW FPGA VI is compiled for the FPGA, the bit stream, which will be downloaded to the FPGA, is stored in the VI file. When LabVIEW RT or LabVIEW Windows attempts to download the bit stream to the RIO card, it makes sure the bit stream corresponds to the VI source code in the same file. This is necessary so that the host application can properly communicate with the VI on the FPGA. If the two are not the same, this error is generated from the Open FPGA VI Reference function in the host application.
Christian L
NI Consulting Services
Christian Loew, CLA
Principal Systems Engineer, National Instruments
Please tip your answer providers with kudos.
Any attached Code is provided As Is. It has not been tested or validated as a product, for use in a deployed application or system,
or for use in hazardous environments. You assume all risks for use of the Code and use of the Code is subject
to the Sample Code License Terms which can be found at: http://ni.com/samplecodelicense

Revaluation not possible

Dear colleagues,
I'm having an issue with transaction J1AI, with just some assets.
The user is trying to run the asset revaluation (inflation), with key date 31.01.2010, and for some assets the program shows the message "Asset 000200000019 0000 has already been revaluated; no futher postings can be made".
For those assets, the values are posted for 2009 in all months, but there are no posted values in 2010.
The fiscal year change and the year-end closing where executed with no errors.
I've checked tables ANLP, ANLC, ANEP, and the values for one of the assets are the same shown in AW01N, so there are no posted values in 2010.
The last revaluation date in transaction AS03 is correct, being 31.12.2009
I don't know what else should I check, any clues???

Hi,
As prerequisite please verify the SAPNote 367561 (the manual steps)
If the message 8z 775 occurs then probably because was changed the
system parameters specially the planned useful life
recently that caused that postings are not correct. Please review
whether there were made any changes.
Regards Bernhard

Page definition is not found while running JSR286 portlet in WebCenter app

Hi All,
I have ADF application which has 3 different task flows 1. my service 2. my car 3. my bike.
which I have placed into a single bounded task flow called repairTaskflow.
I have created a JSR286 portlet out of a repairTaskflow. I am trying to consume it in an Webcenter application. When I place the portlet on to the page in Web center application
and run the page. I see the following error in the console.
oracle.jbo.NoDefException: JBO-25002: Definition ***.xxxx.view.pageDefs.applications_task_flow_applications_task_flow_CreateEmptyApplicationPageDef of type Form Binding Definition is not found.
     at oracle.jbo.mom.DefinitionManager.findDefObjectUsingMetadataObject(DefinitionManager.java:2703)
     at oracle.jbo.mom.DefinitionManager.findDefObjectUsingMetadataObject(DefinitionManager.java:2715)
     at oracle.adf.model.binding.DCBindingContainerDef.findDefObject(DCBindingContainerDef.java:292)
     at oracle.adf.model.binding.DCBindingContainerReference.getDef(DCBindingContainerReference.java:107)
     at oracle.adf.model.BindingContext.findBindingContainerDefByPath(BindingContext.java:1624)
     at oracle.adf.controller.internal.binding.RegionUtils.findOrCreateBindingContainer(RegionUtils.java:246)
     at oracle.adfinternal.controller.util.model.DataBindingActivityImpl.getActivityBindingContainer(DataBindingActivityImpl.java:233)
     at oracle.adfinternal.controller.util.model.DataBindingActivityImpl.beforeExecute(DataBindingActivityImpl.java:77)
     at oracle.adfinternal.controller.engine.ControlFlowEngine.executeActivity(ControlFlowEngine.java:969)
     at oracle.adfinternal.controller.engine.ControlFlowEngine.doRouting(ControlFlowEngine.java:878)
     at oracle.adfinternal.controller.engine.ControlFlowEngine.doRouting(ControlFlowEngine.java:777)
     at oracle.adfinternal.controller.engine.ControlFlowEngine.routeFromActivity(ControlFlowEngine.java:551)
     at oracle.adfinternal.controller.engine.ControlFlowEngine.performControlFlow(ControlFlowEngine.java:147)
     at oracle.adfinternal.controller.application.NavigationHandlerImpl.handleAdfcNavigation(NavigationHandlerImpl.java:109)
     at oracle.adfinternal.controller.application.NavigationHandlerImpl.handleNavigation(NavigationHandlerImpl.java:78)
     at org.apache.myfaces.trinidadinternal.application.NavigationHandlerImpl.handleNavigation(NavigationHandlerImpl.java:43)
     at com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:130)
     at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:190)
     at oracle.adf.view.rich.component.fragment.UIXRegion.broadcast(UIXRegion.java:148)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.broadcastEvents(LifecycleImpl.java:879)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:312)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:185)
     at org.apache.myfaces.portlet.faces.bridge.BridgeImpl.doFacesRender(BridgeImpl.java:1002)
Please find below the portlet.xml file
<portlet-app version="2.0" xsi:schemaLocation="http://java.sun.com/xml/ns/portlet/portlet-app_2_0.xsd http://java.sun.com/xml/ns/portlet/portlet-app_2_0.xsd" xmlns="http://java.sun.com/xml/ns/portlet/portlet-app_2_0.xsd" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <portlet id="adf_taskflow_WEB_INF_test_task_flow_xml">
        <description>test-task-flow</description>
        <portlet-name>test-task-flow</portlet-name>
        <display-name>test-task-flow</display-name>
        <portlet-class>oracle.portlet.bridge.adf.application.ADFBridgePortlet</portlet-class>
        <init-param>
            <name>javax.portlet.faces.defaultViewId.view</name>
            <value>/adf.task-flow?adf.tfDoc=/WEB-INF/adfp-portlet-bridge-container.xml&adf.tfId=adfp-portlet-bridge-container&_fragmentTaskFlowDoc=/WEB-INF/test-task-flow.xml&_fragmentTaskFlowId=test-task-flow</value>
        </init-param>
        <supports>
            <mime-type>text/html</mime-type>
            <portlet-mode>VIEW</portlet-mode>
        </supports>
        <supported-locale>en</supported-locale>
        <portlet-info>
            <title>test-task-flow</title>
            <short-title>test-task-flow</short-title>
        </portlet-info>
        <security-role-ref>
            <role-name>valid-users</role-name>
        </security-role-ref>
        <container-runtime-option>
            <name>com.oracle.portlet.requireIFrame</name>
            <value>true</value>
        </container-runtime-option>
        <container-runtime-option>
            <name>com.oracle.portlet.minimumWsrpVersion</name>
            <value>2</value>
        </container-runtime-option>
    </portlet>
    <portlet id="adf_taskflow_WEB_INF_single_task_flow_definition_xml">
        <description>single-task-flow-definition</description>
        <portlet-name>single-task-flow-definition</portlet-name>
        <display-name>single-task-flow-definition</display-name>
        <portlet-class>oracle.portlet.bridge.adf.application.ADFBridgePortlet</portlet-class>
        <init-param>
            <name>javax.portlet.faces.defaultViewId.view</name>
            <value>/adf.task-flow?adf.tfDoc=/WEB-INF/adfp-portlet-bridge-container.xml&adf.tfId=adfp-portlet-bridge-container&_fragmentTaskFlowDoc=/WEB-INF/single-task-flow-definition.xml&_fragmentTaskFlowId=single-task-flow-definition</value>
        </init-param>
        <supports>
            <mime-type>text/html</mime-type>
            <portlet-mode>VIEW</portlet-mode>
        </supports>
        <supported-locale>en</supported-locale>
        <portlet-info>
            <title>single-task-flow-definition</title>
            <short-title>single-task-flow-definition</short-title>
        </portlet-info>
        <container-runtime-option>
            <name>com.oracle.portlet.requireIFrame</name>
            <value>true</value>
        </container-runtime-option>
        <container-runtime-option>
            <name>com.oracle.portlet.minimumWsrpVersion</name>
            <value>2</value>
        </container-runtime-option>
    </portlet>
    <portlet id="adf_taskflow_WEB_INF_applications_task_flow_xml">
        <description>applications-task-flow</description>
        <portlet-name>applications-task-flow</portlet-name>
        <display-name>applications-task-flow</display-name>
        <portlet-class>oracle.portlet.bridge.adf.application.ADFBridgePortlet</portlet-class>
        <init-param>
            <name>javax.portlet.faces.defaultViewId.view</name>
            <value>/adf.task-flow?adf.tfDoc=/WEB-INF/adfp-portlet-bridge-container.xml&adf.tfId=adfp-portlet-bridge-container&_fragmentTaskFlowDoc=/WEB-INF/applications-task-flow.xml&_fragmentTaskFlowId=applications-task-flow</value>
        </init-param>
        <supports>
            <mime-type>text/html</mime-type>
            <portlet-mode>VIEW</portlet-mode>
        </supports>
        <supported-locale>en</supported-locale>
        <portlet-info>
            <title>applications-task-flow</title>
            <short-title>applications-task-flow</short-title>
        </portlet-info>
        <container-runtime-option>
            <name>com.oracle.portlet.requireIFrame</name>
            <value>true</value>
        </container-runtime-option>
        <container-runtime-option>
            <name>com.oracle.portlet.minimumWsrpVersion</name>
            <value>2</value>
        </container-runtime-option>
    </portlet>
    <custom-portlet-mode>
        <portlet-mode>about</portlet-mode>
    </custom-portlet-mode>
    <custom-portlet-mode>
        <portlet-mode>config</portlet-mode>
    </custom-portlet-mode>
    <custom-portlet-mode>
        <portlet-mode>edit_defaults</portlet-mode>
    </custom-portlet-mode>
    <custom-portlet-mode>
        <portlet-mode>preview</portlet-mode>
    </custom-portlet-mode>
    <custom-portlet-mode>
        <portlet-mode>print</portlet-mode>
    </custom-portlet-mode>
</portlet-app> In all the 3 task flow there is at least one method activity placed either as the default activity or part of activities.
In service page taskflow the default activity is a method activity. If I convert the service-task-flow alone as a portlet, it failed. showing the similar error : pagedef not found.
Then I created the portlet out of car task-flow whose default activity is a page. This time I can view the portlet, the car list page. Once I click create button on that page which again goes through a method activity, then it failed showing the error mentioned above
It seems where ever there are method activities on the taskflow, the portlet cannot find the pagedef and its throwing error . I have cross checked the deployed war file and all the pagedef's are bundled into it.
Any suggestions are much appreciated.
Thanks,
Morgan.
Edited by: Morgan Freeman on Aug 19, 2011 3:27 AM
Edited by: Morgan Freeman on Aug 19, 2011 3:30 AM
Edited by: Morgan Freeman on Aug 19, 2011 6:02 AM

Hi All,
I solved this issue. The path of pagedef files was not recognized when I publish the taskflows as portlets. Though it runs when I place it as a region on jspx file.
The folder structure where I placed pagedefs earlier was some thing like this in ViewController -> Application Resources
com.mycomp.view.pagedefs
When I wanted to consume the portlet in the portal application, all the pagedefs under this path were not visible to the portlet.
Once I change the pagedef folder to the immediate folder after the Application Resources, it found all the pagedefs
Now my folder structure in ViewController -> Application Resources
view.pagedefs
Is this a bug? or Am I missing some thing.
Thanks,
Morgan.

Method oadbtransaction not found while running jsp page

Hi all,
We are trying to use the below method in jsp, but when are trying its giving error as the method OADBTransaction is not found in corresponding directory, can you please let us know from where we need to download this method from server so that we can run the jsp page from local directory.
Thanks in advance.
AppsContext context = ((OADBTransactionImpl)getOADBTransaction()).getAppsContext();
Regards
Deb

Deb,
To get the object of AppsContext we use following code in jsp
import      = "oracle.apps.fnd.common.WebAppsContext"
WebAppsContext wctx = null;
int userId = 0;
try {
              if (Utils.isAppsContextAvailable()) {
                  wctx = Utils.getAppsContext();
                  userId = wctx.getUserId();
catch (Exception e) {}Regards,
Gyan

Fonts are not reflecting while running Java Applet Through Forms

Hello Oralce Gurus!!
I have a Java Applet which has few lines of text in different
fonts such as AgencyFB, Verdana Ref etc., When I am running this
applet from console, I am able to see the text in different
fonts. Where as If I run the applet through forms (as a Bean
(ViewerBean) ), the fonts are not reflected. The text appears in
a default font.
All the fonts are installed on WinNT, where the applet resides.
I will be greatful if anyone can suggest me a solution.
Thanks,
Raghu

try out this
ImageIcon img1=new ImageIcon(this.getClass().getResource(imagename));
for exmaple
Imageicon img1=new ImageIcon(this.getClass().getResource("name1.jpg"));
dont 4get to include the image files in the jar file

Revaluation not possible while running MFN1

Similar Messages

Maybe you are looking for