Revel library contents not matching contents of Mac PSE12 Catalog

I have 38,560 files in my Mac PSE12 catalog which is set to be automatically accessed by Revel. In the Revel app on my Mac, iPhone and iPad there are 38,626 files. Why more files in Revel? This is further complicated because I have file formats in PSE12 (bmp, png, tif, gif) which are not supported by Revel so the number of extra files in Revel is even larger.
More important issue: I recently started adding videos to my PSE12 catalog. I've added 34 videos but only 23 have show up in the Revel Mac app. When I access Revel from a browser it shows several "upload incomplete" message for some videos (can't confirm if this appears for all 11 missing videos). How can this be corrected so all video files in PSE12 appear in Revel?
Thanks.

Hi David,
Questions on the Revel Sync Agent is best answered by the Elements team. I am going to move this post to the Elements forum as they can answer most of your post.
Best regards,
Glenyse

Similar Messages

Library does not match different users

I have two different sign in accounts on my computer. One is for me and the other is for my wife. This was done to keep our email apart. We share the same itunes acount. The only problem is the play list in the libary does not match from one acount to the other. I want the itunes to be the same no matter who is logged in.

My i-Tunes Purchased file
Do you mean the green iTunes purchsaed playlist in iTunes?
For some reason the songs from Purchased are not moving over to my Library
A song in a playlist HAS to be in the library.
My iTunes Library states 1051 songs.
Where are you seeing this?
Are you selecting Library -> Music and looking at the bottom?
Note that the Purchased playlist will also include movies, tv and videos, which are not in the Music section.

IPhoto library will not copy to new mac

I am trying to move my iPhoto library from my hard drive backup (time machine) to my new MacBook Pro.
I open a finder window for my new macs pictures folder and one for the hard drive.
I delete the new library and then drag the back up library to its place..
The file copy window pops up shortly but no transfer takes place before it closes and an icon appears, it does not look like a library icon, more like an empty sheet..
when I open Iphoto no photos are there...
Why can't I copy my library?? It shows a 7.5 GB size and I did not get any warnings that the backup had a problem after backing up.. I'm lost....

To move an iPhoto library you must have a complete operating iPhoto library - if you have one on your old computer then Connect the two Macs together (network, firewire target mode, etc) and drag the iPhoto library intact as a single entity from the old Mac to the pictures folder of the new Mac - launch iPhoto on the new mac and it will open the library and convert it as needed and you will be ready move forward.
If you do not have a good complete operating library then restore it to the old system, test it and drag it across
LN

I pod library does not match i tunes library

I have a ipod classic. My pc was repaired and I did not back up my entire music library. I have those items purchased but nothing else. My pc was repaired and all my music was erased but I still have the files on the ipod. I would like to transfer FROM my ipod to my library I do not want to clear my entire music library or re-load all my cd's into the library. I can not seem to be able to synch those items I transfered from cd back into my pc's itunes library. Anything would help at this point. Thanks

See:
iOS: Device not recognized in iTunes for Windows

How come #of songs on my Library does not match #of songs on my iPod?

I had to re-intall manually all of my songs from my iPod (Thank God I had them all!). Since via Senuti the songs did not import in order, I did it album by album; I took them out and put them on a folder. The thing is, on my iPod I have 4266 songs and on my library I have 4277!?!?!? The worst thing is that on my iPod it says I have 47 days of music, but on my Library just 13? How could this be? Can anyone help...

I've had this issue as well on my iPod touch 2gen. What generation iPod touch do you have?

Can not import avi files into pse12 catalog

I am wondering if any one else is having an issue with importing avi (video files from my Nikon D5000) into the PSE 12 catalog.
Running windows 7 SP1 with all updates.
Camera is a Nikon D5000
file type is AVI
Every time I go to import an avi file (either from my SD card or from my HDD) organizer comes up with the message that it has stopped working and windows is looking for a solution.
I do not shoot much video so it is not a large concern but it used to work in previous versions of PSE.
Any and all help with this issue is appreciated.

Ray
In many instances, a utility software will be bundled in with the camera purchase. Installing that utility software might bring along with it codecs that are needed to work with the video on the computer and in the program. If you do not see or have such a utility software, so much for that idea. If you go after this from the MotionJPEG codec angle, the Morgan MotionJPEG codec has been available online as tryout (later purchase).
http://www.morgan-multimedia.com/morgan/php/products.php?sProductId=5&sProductSub=download s
See
M-JPEG-2000 Codec v3 (32 bit and 64 bit) and the associated tab for "Download - trial/demo".
But, could you clarify on
As soon as I move the avi file off of the sd card the import works.
Given you have the .avi file on the SD card, what is the path to the point where the import works?
That is, where are you moving the .avi file to as it leaves the SD card? Surely not to the hard drive since you wrote.
Also if I go to my hard drive where I saved the avi file and try to import it all by itself, it fails.
I wonder if you are saying that you take it through a route which includes the Video Importer.
Thanks for the follow ups.
ATR

Ipod Mini not matching Itunes library

For some reason my Itunes library is not matching my ipod mini. More songs are on the mini. Is there a way to synch my library with my mini so I don't lose the songs from the mini?

If you have songs that are on your mini but not in the main library of iTunes you will have to use some third party software to copy those songs off the iPod and put them on your PC and in iTunes. go here
http://www.ilounge.com/index.php/articles/comments/copying-music-from-ipod-to-co mputer/

Itunes playlist does not match with ipod playlist.

itunes library does not match with ipod playlist.
when I copy all my songs from itunes library to ipod playlist always a couple songs are missing. I have 5.000 songs in library but only 4700 on ipod.
please help. thank you

I'm not certain I understand the problem: have you re-installed iTunes 6 and now are unable to purchase iTunes Store music?
I have an iPod Mini and have used it flawlessly with iTunes 7 on both a G5 iMac and a G4 Cube under 10.4.7, so "incompatibility" is not the issue here.
iTunes 6.0.5 indeed does continue to allow iTunes Store music purchases...if your problem persists, get back to us here with more info!
eMac Mac OS X (10.4.7)

Error consuming Web service - content type text/xml;charset=utf-8 of the response message does not match the content type of the binding

Hi all,
We are trying to interact with Documentum server through DFS exposed WCF which communicates through port 9443 and we are provided with documentum issued Public Key certificates. We have successfully imported the certificates in client machine and configured
the bindings as below in our .Net web application config file.
<system.serviceModel>
<bindings>
<wsHttpBinding>
<binding
name="ObjectServicePortBinding1">
<security
mode="Transport">
<transport
clientCredentialType="None"
proxyCredentialType="None"
realm=""
/>
<message
clientCredentialType="Certificate"
algorithmSuite="Default"
/>
</security>
</binding>
<binding
name="QueryServicePortBinding">
<security
mode="Transport">
<transport
clientCredentialType="None"
proxyCredentialType="None"
realm=""
/>
<message
clientCredentialType="Certificate"
algorithmSuite="Default"
/>
</security>
</binding>
</wsHttpBinding>
</bindings>
Also, we set the message encoding as MTOM and the wcf client object initialization code snippet is as below,
ObjectServicePortClient
serviceClient = new
ObjectServicePortClient(new
WSHttpBinding("ObjectServicePortBinding1"),
new
EndpointAddress(UriUtil.ObjectServiceUri));
if (serviceClient.Endpoint.Binding
is
WSHttpBinding)
   WSHttpBinding
wsBinding = serviceClient.Endpoint.Binding as
WSHttpBinding;
wsBinding.MessageEncoding =
"MTOM".Equals(transferMode) ?
WSMessageEncoding.Mtom :
WSMessageEncoding.Text;
serviceClient.Endpoint.Behaviors.Add(new
ServiceContextBehavior(Config.RepositoryName,
Config.DocumentumUserName,
Config.DocumentumPassword));
When we execute the above code, we are getting error message as below,
Exception: The content type text/xml;charset=utf-8 of the response message does not match the content type of the binding (multipart/related; type="application/xop+xml"). If using a custom encoder, be sure that the IsContentTypeSupported
method is implemented properly. The first 407 bytes of the response were: '<?xml version="1.0" ?><S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/"><S:Body><S:Fault xmlns:ns4="http://www.w3.org/2003/05/soap-envelope"><faultcode>S:VersionMismatch</faultcode><faultstring>Couldn't
create SOAP message. Expecting Envelope in namespace http://schemas.xmlsoap.org/soap/envelope/, but got http://www.w3.org/2003/05/soap-envelope </faultstring></S:Fault></S:Body></S:Envelope>'
Then, we changed the bindings as below
<system.serviceModel>
<bindings>
<wsHttpBinding>
<binding
name="ObjectServicePortBinding1">
<security
mode="Transport">
<transport
clientCredentialType="Certificate"
proxyCredentialType="None"
realm=""
/>
<message
clientCredentialType="Certificate"
algorithmSuite="Default"
/>
</security>
</binding>
<binding
name="QueryServicePortBinding">
<security
mode="Transport">
<transport
clientCredentialType="
Certificate"
proxyCredentialType="None"
realm=""
/>
<message
clientCredentialType="Certificate"
algorithmSuite="Default"
/>
</security>
</binding>
</wsHttpBinding>
</bindings>
We are getting another error message,
Exception: The client certificate is not provided. Specify a client certificate in ClientCredentials.
Any pointers on resolving this issue would be highly helpful.
Thanks

Hi Dhanasegaran,
As per your case, the corresponding details which may guide you to resolve this issue:
1. First of all, you can try to call the wcf service directly from the browser & check where it will point out the correct location.
2. In config file ,Set IncludeExceptionDetailInFaults to true to enable exception information to flow to clients for debugging purposes .
Set this to true only during development to troubleshoot a service like below :
<serviceBehaviors>
<behavior name="metadataAndDebugEnabled">
    <serviceDebug
      includeExceptionDetailInFaults="true"
/>
    <serviceMetadata
      httpGetEnabled="true"
      httpGetUrl=""
/>
</behavior>
</serviceBehaviors>
3. I suggest you to change that <security mode ="TransportWithMessageCredential"> instead of <security mode ="Transport">
for more information, refer the following link :
https://msdn.microsoft.com/en-us/library/aa354508(v=vs.110).aspx

In videos pictures and content do not match

I have appr 50 videos in my iTunes library. When I use Videos on my iPhone or iPad and chose to go to my Shared library (where I keep all these 50 videos) The videos are all mixed up. The picture showing the video does not match with the name/content. I get this problem also in my Apple TV.
Any ideas? Thanks!

Hello Manyam,
R/3 is raising this message because you are trying to create a PO or PR with a plant that does not match the item reference document.
Reference document can be for example a R/3 contract or a R/3 source list.
It is not possible to change the plant when creating a purchase order with regard to a contract.
Are you using R/3 contract reference in SRM shopping cart ? (maybe coming from catalog item ?)
Did you checked the SOS tab in SRM SC item, to see if the system assigned automatically a SOS (this is the case if only one R/3 SOS is found) ? But in this case, the plant is used as a filter so you could not have SOS from wrong plant.
Rgds
Christophe

Mail problem! - the sender and topic of my emails do not match the content

my mail seems to have suddenly scrambled all of the emails so that the contents do not match the sender and topic. instead there is another email from my inbox under the wrong headings. i have not done anything different lately. if anyone can help i would really appreciate it.

Try rebuilding your Mail index like this:
1. Quit Mail if it's running.
2. Go to ~/Library/Mail and delete the Envelope Index file.
3. Restart Safari and wait for it to import your existing messages.
Mulder

Hi - just using the new iMovie for the first time - apparently there should be a sidebar containing tools like "Content Library". Not on mine - even in Window view, Content Library features like text etc are all greyed out - obviously it's me - help?

Hi - just using the new iMovie for the first time - apparently there should be a sidebar containing tools like "Content Library". Not on mine - even in Window view, Content Library features like text etc are all greyed out - obviously it's me - anyone help please?

Sorry - I should have added that I have imported a Quicktime movie, originally created as an iPhoto slideshow.
I want to create rolling credits at the movie end and apparently you can only do this using iMovie - can you help please?

Sharepoint error - Search Issue - The content type text/html; charset=utf-8 of the response message does not match the content type of the binding (application/soap+msbin1).

i see this error everywhere - In ULS logs, on site. On the site > Site settings > search keywords; I see this -
The content type text/html; charset=utf-8 of the response message does not match the content type of the binding (application/soap+msbin1). If using a custom encoder, be sure that the IsContentTypeSupported method is implemented properly. The first 1024 bytes of the response were: '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>IIS 7.0 Detailed Error - 500.19 - Internal Server Error</title> <style type="text/css"> <!-- body{margin:0;font-size:.7em;font-family:Verdana,Arial,Helvetica,sans-serif;background:#CBE1EF;} code{margin:0;color:#006600;font-size:1.1em;font-weight:bold;} .config_source code{font-size:.8em;color:#000000;} pre{margin:0;font-size:1.4em;word-wrap:break-word;} ul,ol{margin:10px 0 10px 40px;} ul.first,ol.first{margin-top:5px;} fieldset{padding:0 15px 10px 15px;} .summary-container fieldset{padding-bottom:5px;margin-top:4px;} legend.no-expand-all{padding:2px 15px 4px 10px;margin:0 0 0 -12px;} legend{color:#333333;padding:4px 15px 4px 10px;margin:4px 0 8px -12px;_margin-top:0px; border-top:1px solid #EDEDED;border-left:1px solid #EDEDED;border-right:1px solid #969696; border-bottom:1px solid #969696;background:#E7ECF0;font-weight:bold;'.
I am facing issues in searching, my managed metadata service is not running, search results page throws internal error. Any Idea why this above error comes.
P.S: We use windows authentication in our environment.

Hi IMSunny,
It seems you have solved this issue based on your another post.
http://social.technet.microsoft.com/Forums/en-US/aa468ab0-1242-4ba8-97ea-1a3eb0c525c0/search-results-page-throws-internal-server-error?forum=sharepointgeneralprevious
Thanks
Daniel Yang
TechNet Community Support

WCF returning "The content type text/html of the response message does not match the content type of the binding (application/soap+xml; charset=utf-8)"

I have a WCF service I am trying to run on a new installation of 64-bit Windows Server 2008 IIS. Although it runs fine on Windows 2003 IIS, it is throwing the error in the thread title, which appears to be a server config issue, but I am not sure. Googling and searching the MSDN forums did not turn up a solution. I tried running WCF Logging, but that didn't help either.
Does anyone have any suggestions on how to solve this probelm?
Here is the error:
The content type text/html of the response message does not match the content type of the binding (application/soap+xml; charset=utf-8). If using a custom encoder, be sure that the IsContentTypeSupported method is implemented properly. The first 1024 bytes of the response were: '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1"/>
<title>500 - Internal server error.</title>
<style type="text/css">

I have the same issue on Windows 7 machine. The service works fine using a SoapUI client but a .Net client faisl to get a response.
Hi,
I have a WCF service which works perfectly when using SoapUI but throws error in my .Net client.
{"The content type text/html; charset=UTF-8 of the response message does not match the content type of the binding (text/xml; charset=utf-8). If using a custom encoder, be sure that the IsContentTypeSupported method is implemented properly. The first
1024 bytes of the response were: '<HTML><HEAD><link rel=\"alternate\" type=\"text/xml\" href=\"http://xyz.mysite.com/ysa/Broker.svc?disco\"/><STYLE type=\"text/css\">#content{ FONT-SIZE: 0.7em;
PADDING-BOTTOM: 2em; MARGIN-LEFT: 30px}BODY{MARGIN-TOP: 0px; MARGIN-LEFT: 0px; COLOR: #000000; FONT-FAMILY: Verdana; BACKGROUND-COLOR: white}P{MARGIN-TOP: 0px; MARGIN-BOTTOM: 12px; COLOR: #000000; FONT-FAMILY: Verdana}PRE{BORDER-RIGHT: #f0f0e0 1px solid; PADDING-RIGHT:
5px; BORDER-TOP: #f0f0e0 1px solid; MARGIN-TOP: -5px; PADDING-LEFT: 5px; FONT-SIZE: 1.2em; PADDING-BOTTOM: 5px; BORDER-LEFT: #f0f0e0 1px solid; PADDING-TOP: 5px; BORDER-BOTTOM: #f0f0e0 1px solid; FONT-FAMILY: Courier New; BACKGROUND-COLOR: #e5e5cc}.heading1{MARGIN-TOP:
0px; PADDING-LEFT: 15px; FONT-WEIGHT: normal; FONT-SIZE: 26px; MARGIN-BOTTOM: 0px; PADDING-BOTTOM: 3px; MARGIN-LEFT: -30px; WIDTH: 100%; COLOR: #ffffff; PADDING-TOP: 10px; FONT-FAMILY: Tahoma; BACKGROUND-COLOR: #003366}.intro{MARGIN-LEFT: -15px}</STYLE><TITLE>Broker
Service</TITLE></HEAD><BODY><DIV id=\"content\"><P class=\"head'."}
I have the same service hosted on my local machine and when I point to the local service I can execute the operation with no issues. The message encoding is Soap11. I tried changing to Soap12 but I get exact same error. Any ideas greatly appreciated.
I do have windows Activation Features installed and I am using .Net Framework 4.
Thanks
Sofia Khatoon

The content type of the response message does not match the content type of the binding

I have written an ASP.Net web service which returns english,chinese and portuguese data. Everything seemed working fine until the method retunred only english data. The moment it returns english, chinese and portuguese data I get the error:
The content type text/html; charset=utf-8 of the response message does not match the content type of the binding (text/xml; charset=utf-8). If using
a custom encoder, be sure that the IsContentTypeSupported method is implemented properly. The first 1024 bytes of the response were:
'<!DOCTYPE html> <html>     <head>         <title>Runtime Error</title>
        <meta name="viewport" content="width=device-width" />         <style>          body {font-family:"Verdana";font-weight:normal;font-size:
.7em;color:black;}          p {font-family:"Verdana";font-weight:normal;color:black;margin- -5px}          b {font-family:"Verdana";font-weight:bold;color:black;margin-
         H1 { font-family:"Verdana";font-weight:normal;font-size:18pt;color:red }          H2 { font-family:"Verdana";font-weight:normal;font-size:14pt;color:maroon
}          pre {font-family:"Consolas","Lucida Console",Monospace;font-size:11pt;margin:0;padding:0.5em;line-height:14pt}          .marker {font-weight:
bold; color: black;text-decoration: none;}          .version {color: gray;}          .error {margin-bottom: 10px;}          .expandable
{ text-decoration:underline; font-weight:bold; color:navy; cursor:hand; }          @media screen and (max-width: 639px) {           pre { width: 440px; o'.
It is not written using WCF ... any workarounds?!
Thank you.

Hi Raj Krish,
For ASP.NET related issue, please post to the following forum:
http://forums.asp.net/
Regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Revel library contents not matching contents of Mac PSE12 Catalog

Similar Messages

Maybe you are looking for