Revel sorts differently than Elements. How can I fix this?

I have many photos uploaded in Revel now but see the sort according to the file date instead of the EXIF exposure date on some of the photos. These were scanned photos. The probable cause is that for these photos I set only a date but no time in the organizer. I suspect that therefore Revel's sort falls back to the file date.
I'd like to fix this for the photos in the organizer. But I did not find a search criteria to find photos w/o a time set or set to "unknown". I have therefore 3 questions:
1) is my assumption correct?
2) when I change the photo's time will Revel detect that change? (date is unchanged)
3) how can I find the photos that have a date set but no time set?
Thanks

Today, I found out that the sorting in may Elements 12 catalog is already incorrect. In my old Elements 9 catalog the sorting is correct. It was converted to elements 12 catalog upon installation of elements 12.
So, I think probably the catalog conversion has a bug. It should tolerate incomplete date/times, i.e. datatimes w/o time, w/o day and time, w/o month/day and time, just as the sorting in elements 9 did.
Any idea how to fix that (on my side)?

Similar Messages

When opening a pdf document in Adobe Reader the font of the original document is changed....It becomes a mix of the original font and a new different font. How can i fix this

When opening a pdf document in Adobe Reader the font of the original document is changed....It becomes a mix of the original font and a new different font. How can i fix this

This issue occurs with most of the PDFs that I open up. I am using the latest version of adobe reader on my windows based machine and it is a general PDF. I saw a similar post online stating that if you look at the fonts used in the document and it doesn't say (Embedded) next to it, then Adobe Reader will try to pull the font(s) from your computer and if it doesn't find that font then it will replace it which makes it look funny.

My iPhoto '11 won't let me sort ALBUMS manually. How can I fix this?

Recently my iPhoto just started bothering me by not letting me reorder and sort my albums manually, and this aggravates me so much because it's something I prefer, rather than sorting by daye, time, bla bla bla. Please help me with my problem

At this point I would think you'd suggest reinstalling the program.
That's pointless, as there's nothig wrong with the program. We know this because it worked okay in the other account.
I need to back up the library, correct
You should always have a back up of any important data on your computer,regardless of brand, OS, whatever. Windows, Mac, Linux all need back ups end of story.
Most Simple Back Up
Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
Slightly more complex:
Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically. Examples of such apps: Chronosync or DejaVu . But are many others. Search on MacUpdate

Music cd's entered into itunes for copy are in a different tack order than the cd itself; how can i fix this

When I submit a music disc to be copied into my iTunes library, the order of the tracks is scrambled. How can I fix this so that the album track order in my library matches that of the cd itself?

Click the heading above the left most column of numbers.
Regardless of the order displayed during the rip the tracks should be correctly sorted when the library is sorted by Album, Album by Artist or Album by Artist/Year. Sorting on any other column will give different results. See Grouping tracks into albums for details.
tt2

I have Photoshop Elements 10 on a new Mac, using Yosemite 10.1.1 - PE locks up every time I try to sign in. This software was restored to this computer from Time Machine after a theft of my old Mac. How can I fix this?

I have Photoshop Elements 10 on a new Mac, using Yosemite 10.1.1 - PE locks up every time I try to sign in. This software was restored to this computer from Time Machine after a theft of my old Mac. How can I fix this? It keeps telling me that there are missing files, too. If I upgrade to Elements 12 or beyond, will this fix the problem?

You can't sign in because there is nothing to sign in to. For PSE 10 the only sign in was to photoshop.com, which has been dead and gone for a year and half. Just skip the sign in. Reinstalling will not change this.
PSE 8, 9, 10 Can’t Sign In, Error 404 | Barbara's Sort-of-Tech Blog
PSE is locking up because it's looking interminably for the non-existent photoshop.com server.

I have Adobe Elements 9 and I used to be able to export HD 1080p videos with no issue. But recently, when I export using H.264 MPEG or MPEG 2, which I normally used, the high resolution videos come out very choppy. How can i fix this?

I have Adobe Elements 9 and I used to be able to export HD 1080p videos with no issue. But recently, when I export using H.264 MPEG or MPEG 2, which I normally used, the high resolution videos come out very choppy. How can i fix this?

mr
Are you running the 9.0.1 Update of the program and on what computer operating system is it running?
Is your video card/graphics card driver up to date according to the manufacturer of the card?
Is your computer optimized, including maintenance of pile ups of preview files, conformed audio files, and conformed video files?
Do you have the latest version of QuickTime installed on your computer with Premiere Elements 9.0/9.0.1?
What are your project settings and what are the properties of your source media? When you say that "used to be able to export...." is that on the same computer, same brand/model/settings for the camera recording the video now in use, same Premiere Elements 9.0/9.0.1?
Where player are you using for the playback of these exports?
Please give us more details on the size of the projects (then and now) as well as details of the customized export settings in your Share/Computer/ route. Premiere Elements 9.0/9.0.1 is only a 32 bit application running in 32 bit or 64 bit system. Not sure if computer resources might be taxed more so now than before.
More later.
ATR

My new Photoshop Elements 12 has a RAW file plug-in, but when I try OPEN to select a photograph, there are only generic icons instead of pictures-- I can't tell one photograph from another! How can I fix this so I can tell which photograph I want to open?

My new Photoshop Elements 12 has a RAW file plug-in, but when I try OPEN to select a photograph, there are only generic icons instead of pictures-- I can't tell one photograph from another! How can I fix this so I can tell which photograph I want to open? Thank you!

Thanks R_Kelly:
Adobe Photoshop Elements Version: 12.0 (12.1 (20140303.12.1.49334)) x32
Operating System: Windows Vista 32-bit
Version: 6.0 Service Pack 2
System architecture: Intel CPU Family:6, Model:15, Stepping:11 with MMX, SSE Integer, SSE FP, SSE2, SSE3
Physical processor count: 4
Processor speed: 2400 MHz
Built-in memory: 3069 MB
Free memory: 1631 MB
Memory available to Photoshop Elements: 1598 MB
Memory used by Photoshop Elements: 69 %
Image tile size: 128K
Image cache levels: 8
Video Card: ATI Radeon HD 4800 Series
Video Mode: 1680 x 1050 x 4294967296 colors
Video Card Caption: ATI Radeon HD 4800 Series
Video Card Memory: 512 MB
Application folder: C:\Program Files\Adobe\Photoshop Elements 12\
Photoshop Elements scratch has async I/O enabled
Required Plug-ins folder: C:\Program Files\Adobe\Photoshop Elements 12\Required\
Primary Plug-ins folder: C:\Program Files\Adobe\Photoshop Elements 12\Plug-Ins\
The first thing I did was UPDATE. I have all the latest updates available (according to the updater). The Camera Raw Plug-in says it is version 8.0.
The RAW files are from a Canon T3i. It's a very common camera, I can't believe it wouldn't be supported.

Okay so my IPod touch 4 won't play music through any headphone I put into the port. I've tried it with 4-5 different headphones but it still won't work. How can I fix this?

Okay so my IPod touch 4 won't play music through any headphone I put into the port. I've tried it with 4-5 different headphones but it still won't work. How can I fix this? This isn't the first time something like this has happened but it has never stayed this way for such a long time. If I have to send it in for repairs I will but I'm not sure if its under warranty

To check for warranty coverage:
https://selfsolve.apple.com/agreementWarrantyDynamic.do
- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
Try the following to rule out a software problem
- Reset the iOS device. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
If not under warranty Apple will exchange your iPod for a refurbished one for $199 for 64 GB 4G and $99 for theother 4Gs. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit

How can I fix this permissions "Library/Printers-should be 80 group is 0. Permissions differ. And User differs on "private/var/db/displaypolicyd" should be 0; Group is 244?

How can I fix this on my 2014 iMac, please?
Verifying permissions for “Macintosh HD”Group differs on “Library/Printers/InstalledPrinters.plist”; should be 80; group is 0.Permissions differ on “Library/Printers/InstalledPrinters.plist”; should be -rw-rw-rw- ; they are -rw-r--r-- .User differs on “private/var/db/displaypolicyd”; should be 0; user is 244.Group differs on “private/var/db/displaypolicyd”; should be 0; group is 244.
I run the "fix" and it seemingly does, but if I verify permissions again later it returns.
Thank you!

It's not an error but an informative message that you can safely ignore. it's innocuous.

It locked the different email in Creative Cloud, how can i fix this problem, thx!

I've applied Adobe a/c and rent the PS and LR for my desktop, but when i do it the same way in my notebook, it locked the different email in Creative Cloud, how can i fix this problem, thx!

Change/Verify Account https://forums.adobe.com/thread/1465499 may help
-http://helpx.adobe.com/x-productkb/policy-pricing/change-country-associated-with-adobe-id. html
-Credit card https://helpx.adobe.com/utilities/credit-card.html
-ID support http://helpx.adobe.com/x-productkb/global/service-c1.html
-wrong email https://forums.adobe.com/thread/1446019

I have a Photopshop Elements 10.0 on my Mac, I purchased it in English, did an upgrade of my Mac to OS Yosemite and suddenly the language of Photoshop is German. How can I fix this ?

I have a Photopshop Elements 10.0 on my Mac, I purchased it in English, did an upgrade of my Mac to OS Yosemite and suddenly the language of Photoshop is German. How can I fix this ?

I have found another solution. I upgraded to Yosemite and found the the App Store version of PSE 10 (which didn't change) was suddenly in German. Close PSE if it is open. Use the Finder and go to the PSE 10 application in the Applications folder. Right click (or ctl-click) on it and select "Show Package Contents". Then go to Contents>Locales and delete the de_DE folder. (I imagine you could also rename it to something starting with a letter after "e". I think PSE is probably using the first language it comes to in this Locale folder.) Start PSE. It worked for me. Hope this helped.

I recently installed Photoshop Elements 13. I can't launch help & tutorials etc. how can I fix this?

I recently installed Photoshop Elements 13. I was able to launch help, tutorials etc. but as of today I get "Forbidden You don't have permission to access /chcservices/services/redirect on this server". How can I fix this?

Had to go with Method 2, but couldn't locate the Preference file, (yes hidden files are visible).
Following the path you suggest, in C: I have Users>user name>AppData>Roaming>Adobe>Elements_Organiser>12.0>Organiser>Log.txt
And I couldn't find it in S: either.
I uninstalled using the DVD program, and this time was sure I ticked the 'Remove Preferences' box. I CC cleaned registry and files before and after removal and again after a restart.
I did a fresh install feeling very hopeful, but I'm afraid the result is still the same.
I suppose I could try installing on C: in case that is an issue, but it's not a very satisfactory long term solution as I'm restricted on space.

I have photoshop elements 12 and when I use the font it crashes the program, how can I fix this?

I have photoshop elements 12 and when I use the font tool it crashes the program, how can I fix this?I have a macbook pro

Use the crop tool.
On the tool's option bar, type 300 px & 200 px, and the desired resolution.

The lens correction option in Lightroom 5 is for the Tamron 28-75mm lens, rather than the correct Tamron 18-270mm, even though it's correct in the Library metadata. How can I fix this?

The lens correction option in Lightroom 5 is for the Tamron 28-75mm lens, rather than the correct Tamron 18-270mm, even though it's correct in the Library metadata. How can I fix this?

Are you shooting RAW or JPG or some of both?
When you say it won't let you change it, does that mean there are no lens profiles at all, or no lens profiles that match your lens? If you set Auto or Default you can select any lens you want from the list of manufacturers and profiles and then the Setup says Custom. Of course this lens may not be the correct lens, but saying you cannot change it suggests there are no manufacturers or lenses listed on the dropdowns.
Most lens profiles are for RAW only, so if you shoot a mixture of RAW and JPG then for the JPGs the lens profile may not exist. If you are enabling Lens Profiles and have Auto or Default set and it chooses the wrong one then it may just be choosing the top one in the list for Canon if the specific profile doesn't exist for JPGs.
If you are shooting raw and the profile does exist then you should be able to correct the situation: In the list select the correct profile, then choose Setup: Save New Lens Profile Defaults, and select Default from the Setup instead of Auto and it should pick the correct lens every time. Assuming it does do that, then you can set Enable Lens Profiles = checked and Setup: Default and set those as your new Lightroom Defaults and it should pick the right lens.
If you are shooting JPG then the lens profile may well not exist and there's nothing you can do about that except not shoot JPG. If you feel like it you can hack a raw profile to be a jpg profile and put that hacked copy in the user-lens-profile area and LR will see it.

For some reason when I plug my ipod into my comp itunes freezes but my ipod says it is plugged and when I plug it into a different comp it works. How can I fix this?

For some reason when I plug my ipod into my comp itunes freezes but my ipod says it is plugged and when I plug it into a different comp it works. How can I fix this?

Setesh, See if both computer has the same version of iTunes, if both are the same, then it is your PC, that has plug-ins which is in conflict it iTunes. ( normally it is the Antivirus or some plug-ins to beautify your screen)
If it is different, most likely the other PC has an older version of iTunes, so you should downgrade your iTunes to that older version, which your iPod interface well with.
Other probable causes,
you are using the USB 1.1 port at the front of your PC, and not the USB2,0 port at the back of your PC. so switch to the back.
Dont use any other USB devices, when you are syncing the iPod.
Dont use any USH Hub.
Have a nice day!

Revel sorts differently than Elements. How can I fix this?

Similar Messages

Maybe you are looking for