Revenue from post-capitalization from transaction ABNAN

I am working for a local governmental entity, and I am trying to add assets to our system that should have been recognized as acquisitons in previously closed fiscal years. I understand that the transaction I should be using is ABNAN, post-capitalization, however; a problem that I'm running into is, after I post the transaction and perform the next step, transaction ASKB, to post full and contra accrual account postings, I get the following error message: "Revenue from post-capitalization could not be found". We do not have that account set up, nor do we think it's applicable. These are not donated assets from outside our organization,  these are simply assets that did not get captured through our normal acquisition processess. Is there a way to run transaction ABNAN and not get this message? Might this be something that can be changed through configuration? Thanks for your help.

Thanks for your help and information Kartik. We are almost done with this being resolved. In the process of creating the assets using AS91 we are encountering an error message regarding the Date of the Legacy Data Transfer. This date is currently 06/30/05. Since we want to use a capitalization date of 06/30/07, is there any negative impact on changing this transfer date to 06/30/07? Changing the date in a test environment allows us to proceed but I wanted to make sure there were no negative impact since we are not familiar with the purpose of this date.

Similar Messages

  • Impute revenue to Internal Order from SD

    Hi Experts,
    Is it possible to impute revenues to Internal Order from SD? Is necessary some configuration?
    Thanks in advance.
    José Luis

    If your cost of sales account is not setup as a cost element (which it shouldn't be if you are using cost based COPA), then you will need to created another cost of sale G/L account which does have a cost element and use that account for this transaction.  The G/L account that is selected for cost of sales is based on the movement type selected in the sales transaction and the valuation class assigned to the material.
    The easiest way of having the system find a different G/L account for this is to use a material in the sale transaction with a different valuation class that can be assigned to this new G/L account.  You can use transaction code (FBKP) to assign the G/L account to the correct account modifier for that valuation class.
    If you can't use a different valuation class (because this material is used in other situations as well), then the process is more complicated.  You will need to have the sales transaction find a different movement type for this so that you can assign a different account modifier and G/L account.  You will probably need to work with your S/D consultant to make this work, but I'll take you through some of the steps.
    In the standard system, movement type 601 is usually used to issue the inventory against the delivery and record the cost of goods sold accounting posting.  The trick here is to assign a different movement type to this speicific transaction.  The movement type is assigned to the schedule item category that is assigned to the sales line.  The schedule item category is derived from the item category, so you may need to have your S/D consultant create a new item category, a new schedule item category, and a new movement type for you.  Now that you have a new movment type, you assign a account key and modifier to the movment type.  From there assign the correct G/L account to the account key and modifier for your valuation class.
    thanks,

  • Error while posting data from SCM to XI

    Dear Expertise,
    I got a requirement where I need to post data from SCM to XI server. From SCM
    side it is an ABAP proxy. When I tested the scenario and checked in the MONI of
    SCM I got an error. But SCM is correctly configured pointing to XI under Tcode
    SM59 (SM59 --> Connection Type H (HTTP Connection to ABAP System) -->with
    correct user credentials and PIPE line URL of XI server).
    Please let me know is this the correct settings for ABAP proxy for connecting
    from SCM system to XI system.
    Error Dump in SXMB_MONI:
      <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Call Integration Server
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="INTERNAL">HTTP_RESP_STATUS_CODE_NOT_OK</SAP:Code>
      <SAP:P1>401</SAP:P1>
      <SAP:P2>Unauthorized</SAP:P2>
      <SAP:P3 />
      <SAP:P4 />
    <SAP:AdditionalText><!DOCTYPE html PUBLIC"-//W3C//DTD HTML 4.01Transitional//EN">
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>HTTP response contains status code 401 with the description Unauthorized Authorization error while sending by HTTP (error code: 401, error text: Unauthorized)</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    Thanks in Advance,
    Gujjeti

    HI
    Check these
    For Error: HTTP_RESP_STATUS_CODE_NOT_OK 401 Unauthorized
    Description: The request requires user authentication
    Possible Tips:
    • Check XIAPPLUSER is having this Role -SAP_XI_APPL_SERV_USER
    • If the error is in XI Adapter, then your port entry should J2EE port 5<System no>
    • If the error is in Adapter Engine
    –then have a look into SAP note- 821026, Delete the Adapter Engine cache in transaction SXI_CACHE Goto --> Cache.
    • May be wrong password for user XIISUSER
    • May be wrong password for user XIAFUSER
    – for this Check the Exchange Profile and transaction SU01, try to reset the password -Restart the J2EE Engine to activate changes in the Exchange Profile After doing this, you can restart the message

  • How to change value date from posting date to net due date

    Hi Gurus,
    My client wants to change value date from posting date to net due date. currently posting date is considered as value date but in future client wants to change value date to net due date of documents.
    1. what configurations need to be maintained to change value date from posting date to net due date.
    2. Will these changes effect automatic payment run.
    Thanks and Regards,
    Suresh

    Hi Suresh,
    In Future
    While posting the documents you can mention the value date as due date of the documents.
    For already posted documents
    You can change the value date to net due date.
    If the value date is display mode i.e. if you are not able to change the value date in FB02 (Document Change Mode), use OB32 transaction and make value date field as eidtable (BSEG-VALUT).
    In OB32 transaction enter all the required fields like Account type, transaction type, company code and finally activate the Field can be changed check box.
    But not sure, whether we can change the value date to previous date or not?
    This would help you..
    Regards,
    Praisty
    Edited by: Praisty on Jul 28, 2009 9:56 AM

  • Posting documents from SD to FICA

    Dear gurus, when you post a document from SD to FICA, where does the account determination take places?
    According to my understanding the account determination take place in SD, and FICA only puts the main and sub transactions taken from the customizing (Integration FICA - SD), and you dont need to configure the actual account determination for those main and sub transactions in FICA, am I right?
    Best regards.

    Hi William
    Could you explain in detail how it works ? I am trying to post documents from normal SD to FICA (Extended) I mean not industry specifit FICA. But I getting the following Error.  
    You cannot derive main/sub-transaction from SD information F2 TAN MWS
    Message no. >R017
    Diagnosis
    The main transaction or sub-transaction for FI-CA Contract Accounts Receivable and Payable could not be derived using the SD information (sales) billing type F2, item category TAN, material account assignment group  and account key MWS in the application area.
    Procedure
    Check and, if necessary, correct the entry.
    Procedure for System Administration
    If the entry is correct, check and change the system settings where necessary.
    To do so, choose Maintain Etries or Customizing.
    Please do explain bit detailed.
    Thanks in Advance
    Ratnakar K

  • Posting change from Unrestricted to Quality inspection

    Hi Experts,
    Help please.
    I am trying to do posting chnage using MB1B transaction (322 Mvt type). But I'am having an error : "Change the inspection stock of material XXXX in QM only".
    I do not know what this error means, Please someone help me.
    Initially, the material was received in "Quality inspection", but it was already been moved to Unrestricted. But now, we are having problem in doing posting change from Unrestricted to Quality inspection.

    as the collegues already said. when QM is active you cannot do manual QM transfer postings.
    But you can do a MIGO with 102, to cancel the receipt. (you have to change the proposed quality status in item detail  from Quality to unrestricted before you can do this)
    Then you can receive it again the standard way. It will again go to Qualtity inspection and create an inspection lot .

  • Removing posting access from txn codes (FBV2, FBV3 and MIR4)

    Hello all,
    There is a business requirement to remove the ability to post
    Financial documents from a particular FI role. We are using a
    job role (for the most part, one SAP role per user) approach.
    For the transaction codes FBV2, FBV3 and MIR4, they would like to
    remove the ability to post. The relevant auth. object for
    posting is object F_BKPF_BUK, Vendor: Account Authorization. In
    this role, the ability to post (which is actually activity 01,
    create), has been removed; however, the role still has the
    ability to post the documents.
    I executed an auth. trace for each transaction code and the only
    activities outside of 03 or 77 (pre-enter) are checked in this
    object. I also verified that none of the other roles assigned to
    the test ID (a FI reporting and display role) have this
    authorization object with 01 in the activity field.
    As a sanity check, if anyone has removed posting access from
    specific FICO roles, please confirm that this authorization
    object is the correct one. I believe I've done the standard
    security 'debugging' steps and now I am stuck.
    Also, other transactions with posting access FV60 and FBV6 are
    restriction from posting by removing activity 01 from objects
    F_BKPF_BLA and F_BKPF_KOA.
    Thanks in advance for your help!

    Hi, the authorizations were correct in the first place - ths issue is that they didn't test it fully because the post button was still visible. However, when I tested it via the instructions given by FICO, when I selected the post button, security prevented me from doing so and authorization object F_BKPF_BUK for activity 01 was checked.
    Next time, I will make sure the testers are testing properly.

  • How to post idoc from r/3 to xi

    hi experts i have one doubt abt posting idoc from r/3 to xi
    how to post
    for vendor master idoc
    for sales order idoc
    for purchase order idoc
    for delivery idoc
             is there any inbuilt posting prgms r there or we have to write the prms.
    please clear me
    regards
    babu

    to add more...
    Befor posting IDOCS into XI..we need to do ALE SETTINGS...as fallows..
    <b>ALE settings.</b>
    <u><b>SAP XI</b></u><b>1) RFC Destination (SM59)</b>
    a) Choose create.
    b) Specify the name of the RFC destination
    c) Select connection type as 3 and save
    d) In the technical settings tab enter the details SAP SID/URL and system number#.
    e) Enter the Gateway host as same details above SID/URL.
    f) Gateway service is 3300+system number#.
    g) In the Logon /Security tab, enter the client user & Password details of Destination system.
    <b>h) Test the connection and remote logon.
    2) Create Port (IDX1)</b>
    a) Select create new button
    b) Enter the port name as SAP+SID (The starting char should be SAP)
    c) Enter the destination client.
    d) Enter the RFC Destination created in SAP R/3 towards other system.
    e) Save
    <b>3) Load Meta Data for IDOC (IDX2)</b>
    a) Create new
    b) IDOC Message Type
    c) Enter port created in IDX1.
    <u><b>SAP R/3</b></u>
    <b>1) RFC Destination (SM59)</b>
    a) Choose create.
    b) Specify the name of the RFC destination
    c) Select connection type as 3 and save
    d) In the technical settings tab enter the details SAP SID/URL and system number#.
    e) Enter the Gateway host as same details above SID/URL.
    f) Gateway service is 3300+system number#.
    g) In the Logon /Security tab, enter the client user & Password details of Destination system.
    h) Test the connection and remote logon.
    <b>2) Create Port (We21)</b>
    a) First Select Transactional RFC and then click create button
    b) Enter the destination port name as SAP+SID (The starting char should be SAP)
    c) Enter the destination client.
    d) Enter the RFC Destination created in SAP R/3 towards other system.
    e) Save
    <b>3) Create Partner Profile (WE20)</b>
    a) Create New
    b) Create the Partner no. name as same the logical system name of the destination system.
    c) Select Partner type LS
    d) Enter details for Type: US/USER, Agent, and Lang.
    e) Click on the + button to select the message type.
    f) Select Partner no. and LS which ever create above.
    g) Select Message type
    h) Select Process code related to the Message type.
    I) save.
    <u><b>In SLD – System Landscape Directory</b></u>
    TS for R/3 (Logical system):-Assign the client name created in R/3 as Logical system Name.
    Ts for Third Party (Logical system):-
    BS for SAP R/3 (Logical system):- Assign the client name created in R/3 as Logical system Name.
    BS for Third Party (Logical system):-Enter the XI logical system name.
    <b>In Transaction SALE</b>
    Define and Assign the logical system name.
    <b>and coming to the posting, u can go with WE19</b>

  • Blocking Users from Posting

    Hi,
    We are auditing this company and we noted that there are three dormant company codes. They became dormant because these companies were already dissolved and liquidated. Currently. these three are set to non-productive.
    My question is: Is there a way to block users, who have access to all company codes, from posting to these company codes? I was hoping maybe there is some configuration that will prevent the users from posting any transaction to these company codes. We don't want to clean up the roles since this is a big exercise.
    Appreciate if you can help me on this matter.
    Thanks in advance.

    Post it in Netweaver--- security forum.
    For your question..I think it can be done through configuration...If there is no existing company code..how can they post?

  • Automated data load from APO to SEM transactional cube

    Hi ,
    We have BW-SEM system integrated with APO system.
    I could see automated data loads from APO to SEM transactional cube ..
    Infopackage name as "Request loaded using the APO interface without monitor log" ..
    I don't see any infopackage by this name in both the systems ( APO & SEM )..
    I am not sure how it configured ..
    Appreciate any inputs on how its happens .....
    Thanks in advance

    Hi,
    As I mentioned the starting point will be the tcode BPS0. There will be 2 planning areas created (if I am correct) one for SEM cube and the other for APO cube. The better way to find it will be goto tcode se16 and enter UPC_BW_AREA and key in the cube names in the cube field. this will give you the planning area names now look for a multiplanning area which has the 2 areas included in them (this is available in table UPC_AREAM).
    then goto BPS0 and you will have to find which function is being used to post the data.
    thanks

  • Stock Posting List from Item Master Data

    Hi,
    We just encounter a strange problem. In SAP we could go to an Item record and right click to choose Stock Posting List which will bring out the stock posting report that list all the in and out records for this particular item. The report can be generated shortly.
    Over the weekend we enter into a new fiscal year and suddenly the Stock Posting List from item master does not contain any entries from previous fiscal year and it takes very long to show the list.
    We could however run the Stock Posting List as normal from Stock Reports which will show all the records.
    The problem if the Stocking Posting List from the item master only shows entries in the current fiscal year why suddenly the performance degraded when there is actually less data to be displayed.
    Any one encountered such situation as well?
    We are on PL44
    BR,
    Jimmy

    Hi Jimmy,
    This is the System behaviour in SAP 2007 A. Due to the changes in posting period functionality, it is not possible to choose posting period. That is the reason why if you right click on an Item Master Data, Inventory posting list only for the current year appears. If user wish to see transaction for the other years, he needs to open Inventory Posting List report and set dates in the Selection criteria window.
    Regards,
    Varun
    SAP Business One Forum Team
    Edited by: Varun Kumar on Mar 3, 2009 9:36 PM

  • Calquarter from posting period in reporting level

    Hi Guys,
    We don't have the calquater in cube level.But in reporting
    we need to calculate the calquarter from posting period.
    My requirement is, when user enters the posting period 5 it
    should show the quarter 1 and quarter 2 values. If user
    enters posting period 7 it shoold show the qua1,qua2 and
    qua3 values.
    Can any one suggest me how we can get this?
    Helpful answers will be rewarded with full points.
    Prasad

    Hello,
    Create 4 variables (range) on Posting period for eg. qtr1 , qtr2, qtr3, qtr4 of type Customer Exit. Now Create 4 Restricted Keyfigures for the Key figure u want to display each restricted with posting period by qtr1 , qtr2, qtr3, qtr4.
    Now write the code to fill in these variables depending on the User entry value. so for eg, if user enters 5, then fill
    qtr1 with low value 001 and high value 003 of the same year as input value.
    qtr2 with low value 004 and high value 005 (input value) of the same year.
    as you dont want to show qtr 4 and qtr 5, fill them with some period for which you are sure there would be no values in the cube (may be some period in past or dummy year like 9999). You can then eliminate these columns by suppress zero value columns.
    Similarly write the logic for all 12 periods to fill corresponding Qtr1 to Qtr 4. So in report Restricted KF will show KF value resricted to corresponding Qtr
    Thanks

  • Passing Parameters via Post Method from Webdynpro Java to a web application

    Hello Experts,
    I want to pass few parameters from a web dynpro application to an external web application.
    In order to achieve this, I am referring to the below thread:
    HTTP Post
    As mentioned in the thread, I am trying to create an additional Suspend Plug parameter (besides 'Url' of type String) with name 'postParams' and of type Map.
    But when I build my DC, I am getting the same error which most of the people in the thread have mentioned:
    Controller XXXCompInterfaceView [Suspend]: Outbound plug (of type 'Suspend') 'Suspend' may have at most two parameters: 'Url' of type 'string' and 'postParams' of type 'Map'.
    I am using SAP NetWeaver Developer Studio Version: 7.01.00
    Kindly suggest if this is the NWDS version issue or is it something else that I am missing out.
    Also, if it is the NWDS version issue please let me know the NWDS version that I can use to avoid this error.
    Any other suggestion/alternative approach to pass the parameters via POST method from webdynpro java to an external web application apart from the one which is mentioned in the above thread is most welcome.
    Thanks & Regards,
    Anurag

    Hi,
    This is purely a java approach, even you can try this for your requirement.
    There are two types of http calls synchronous call or Asynchronous call. So you have to choose the way to pass parameters in post method based on the http call.
    if it is synchronous means, collect all the values from users/parameters using UI element eg: form and pass all the values via form to the next page is nothing but your web application url.
    If it is Asynchronous  means, write a http client in java and integrate the same with your custom code and you can find an option for sending parameters in post method.
    here you go and find the way to implement Asynchronous  scenario,
    http://www.theserverside.com/news/1365153/HttpClient-and-FileUpload
    http://download.oracle.com/javase/tutorial/networking/urls/readingWriting.html
    http://digiassn.blogspot.com/2008/10/java-simple-httpurlconnection-example.html
    Thanks & Regards
    Rajesh A

  • 'Document does not contain any items' error while posting GR from BAPI

    Hello Friends,
    I am trying to post GR from BAPI 'BAPI_GOODSMVT_CREATE' but some time it post successful and some time it does not post..gives error 'Document does not contain any items'....i have search all option but did not get any solution why this error is coming....kindly help me if you have any information regarding that.
    The strange thing is i have alrady posted GR with some test data and later on again am trying to post GR with same test data but it is giving error as above.
    For your information...i am using enhancement spot in standard program for GR posting...could it give any problem.
    Regards,
    Rajkishor.

    Solved by my self...problem was i were using enhancement spot in standard program because of this it was creating problem have search new enhancement spot and put my code out there now it is working fine.
    Thanku very much all of you for your reply.

  • Error while posting stock from quality to return delivery

    Hi ,
    I am working in decentralized warehouse. I am posting stock from quality to return delivery in t code QA32. The following is the error message i am getting . i have also checked the movement type settings they are fine for 553.
    "Posting only to free or blocked stock due to missing goods receipt".
    Please let me know if i am missing any thing in config......
    Thanks
    Ilyas

    Hi Ilyas,
    Can you check again the movement type? For return delivery movement type 122 is used and 553 is for GI scrapping from QI. You can check it in SPRO>QM>QI>Inspection lot completion> Define inventory postings.
    reg,
    Sudhir

Maybe you are looking for