Revenue not update in the project

Dear All
I had created the Project and i had assigned to the sales order in account assignment tab.Then i have created Billing with reference to sales order and i had checked in report i can't able to see the Plan and actual revenue for the proejct.Here we are useing milestone type of billing.In the planning profile i had ticked bottomup planning i had selected annual values And i had ticked automatic revenue planning from sales order Please guide me to solve this error
Regards
Raj

check with your FI consultant what is the revenue element type - should be 11 not 1
also check the account determination entries in sales order - does the sales order determine the revenue account - if that is correct than this should be reported against the assigned WBS (billing element). In sales order go to Environment -> Analysis -> Account determination - check the GL account determined
In planning profile maintain revenue from sales order - in this case revenue element maintenance in planning profile is not required
also remember to assign the billing plan for the line item else there will be no revenue against the WBS

Similar Messages

Sharepoint 2013, MS Project 2013 - Task List not updating when the project file is changed

Hi
I have created a SharePoint task list and timeline from a MS Project 2013 file on my PC. I have then created a new Project file from that task list which then places the new project file in the site asset folder and provides me with a synced copy. I now
only use the SharePoint copy of the project file in my MS Project as any change I make to the project file should be reflected in the Task list and vice-versa
However if I add some tasks into the middle of the project with MS project, the SharePoint Task list is not updated to show these additional tasks. If I open the SharePoint task list with MS Project - from the task list toolbar - the project file shows the
added tasks.....so the MS Project file in the site asset folder is correct but the tasks in the SharePoint task list is not being updated
Anyone seen this before ?
Thanks
Geoff

Hi Esben,
According to your description, the error occurred when opening the task list with the content approval enabled in Project.
Per my knowledge, when we enable the content approval for the task list, the field named Approval Status which is required will be created in the list.
However, if a project plan doesn’t contain a field that is required in SharePoint, the plan won’t sync.
The error occurs because of the required field Approval Status when the content approval is enabled in the task list, so we need to add the required field as a custom field in Project.
More information:
Sync with a SharePoint tasks list:
http://office.microsoft.com/en-in/project-help/sync-with-a-sharepoint-tasks-list-HA102828524.aspx
Best regards.
Thanks
Victoria Xia
TechNet Community Support

[svn:fx-trunk] 7801: Submit on behalf of Pete - an update to the project settings for the flex4test project , the link type was wrong.

Revision: 7801
Author:   [email protected]
Date:     2009-06-12 14:38:25 -0700 (Fri, 12 Jun 2009)
Log Message:
Submit on behalf of Pete - an update to the project settings for the flex4test project, the link type was wrong.
Doc Notes: None
Bugs: None
Reviewer: none
tests: compile & run
Modified Paths:
    flex/sdk/trunk/development/eclipse/flex/flex4test/.actionScriptProperties

Wait a second...there is more to that error message that I overlooked before.
There might be something other than just the way I set the CODE and CODEBASE parameters wrong here
Any ideas?
Here is the entire messsage:
load: class DisplayMonoApplet.class not found.
java.lang.ClassNotFoundException: DisplayMonoApplet.class
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadCode(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Caused by: java.io.IOException: open HTTP connection failed.
     at sun.applet.AppletClassLoader.getBytes(Unknown Source)
     at sun.applet.AppletClassLoader.access$100(Unknown Source)
     at sun.applet.AppletClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     ... 10 more

Print Module templates layouts do not update on the fly

Print layouts do not update on the fly when attempting to choose between various Print Module>Template Browser> Lightroom or User templates. This occurs in all three Layout Styles. The very first layout chosen in Single Image/Contact Sheet, Picture Package, or Custom Package is the permanent 'default' and cannot be changed. The Preview will show as expected however any image stays stuck in the very first layout I chose after installing LR4 beta.
For example, I first chose Template Browser>Lightroom Templates>Maximum Size, and Layout Style>Single Image/Contact Sheet. Clicking through any other Templates (Lightroom or User defined) will alter the preview but not the layout display in the Print window. Same problem in either of the other Layout styles. I have been trying for days to rectify this, but it seems somehow more difficult than LR3. and not what I expect.
As a comparison, using the same steps in LR3 works perfectly as all print template/layouts can be changed on the fly as expected. I have no problems generating different layouts in LR3 and have been using LR print module since version 1 without this issue.
Is this a bug or are there any extra steps or workarounds I have not discovered? Any other testers seen this?

Update with more info. What am I doing wrong, if anything?
Print layouts do not update on the fly when attempting to choose between various Print Module>Template Browser> Lightroom or User templates. This is not a hang since the layouts do not change after the initial choice no matter how much time elapsed.
iMac OS 10.6.8. 8GB RAM.Processor Intel Core 2 Duo. NVIDIA GeForce 8800 GS.
The steps as follows:
1) Lightroom 3.6 & LR4Beta exist side by side.
2) LR4 Beta> Print Module;
3) From filmstrip choose image;
4) Template Browser> Lightroom4Beta Templates>Maximum Size;
5) Preview displays as expected;
6) Layout Styles>Single Image/Contact Sheets
7) Template Browser> Lightroom4Beta Templates>click through any other templates (Lightroom or User defined);
8) Image layout in main window does not update;
9) Previews update;
10) Layout Style>Picture Package;
11) Template Browser>Maximum size is then automatically shown, however the template in the main window is actually (1) 7x5, (2) 2.5x3.5;
12) Any further attempts to change the layouts regardless of Style Layout choices are not successful.
13) Close LR4Beta>re-open LR4Beta;
14) Repeat test;
15) Print Module layouts do not update on the fly as expected;
16) Close LR4Beta and all applications;
17) Reboot iMac.
18) Open LR4Beta only;
19) LR4Beta>Print Module>Template Browser >Lightroom Templates>Maximum Size;
20) Image displays in main layout window with Template and Preview display as expected;
21) Choose different image>Template Browser>Lightroom Templates>Maximum Size;
22) Click through templates, layouts DO NOT update in main window although previews do automatically update.
23) CONCLUSION - In Lightroom 4 Beta>Print Module>Template Browser, image layouts do not change after initial choice as expected.
I posted this on Photoshop.com as a problem.

Error MSB4057: The target "PlatformPrepareForBuild" does not exist in the project._

Hi to all,
I tried to compile my .sln with VS2010 but I had this error.
error MSB4057: The target "PlatformPrepareForBuild" does not exist in the project.
It occurs only compiling with win32 configuration but not with x64 one.
Ideas?
Thank you in advanced

In which version of Visual Studio did you create this solution? And What type of the project in this solution? And could you please post the proj file here?
If this solution is created in VS2012 or VS2013, please make sure the original solution is not corrupt, it can be opened and built successfully in the corresponding Visual Studio. For probable compatibility issues, you could check the documents here:
Visual Studio 2012 Compatibility
Visual Studio 2013 Compatibility
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Data is not updated in the database

hi.. to all..
i'm using the following code ...... but the data is not updated in the database.. the output window get closed as soon as i clicked save button...
i don't know wat's problem with the program...
Plz help me.. to get resolve this problem..
import java.applet.*;
import java.awt.*;
import java.sql.*;
import java.awt.event.*;
import sun.jdbc.odbc.*;
public class Customerdetails extends Frame implements ActionListener
     TextField ccod,cname,add,phno,conp,email,fax;
     Label l1,l2,l3,l4,l5,l6,l7;
     Button save,exit;
     Connection con;
     ResultSet rs;
     Statement stmt;
     String s1,s2,s3,s4,s5,s6,s7;
public Customerdetails()
    super("CustomerDetails");
    setSize(700,750);
    setLayout(null);
    setBackground(new java.awt.Color(245, 117, 105));
    l1=new Label("Customercode");
    l2=new Label("CompanyName");
    l3=new Label("Address");
    l4=new Label("PhoneNumber");
    l5=new Label("Contact person");
    l6=new Label("EmailAddress");
    l7=new Label("FaxNumber");
    l1.setBounds(20,100,100,70);
    l2.setBounds(20,180,100,70);
    l3.setBounds(20,270,100,70);
    l4.setBounds(20,340,100,70);
    l5.setBounds(20,420,100,70);
    l6.setBounds(20,500,100,70);
    l7.setBounds(20,580,100,70);
    ccod=new TextField();
    cname=new TextField();
    add=new TextField();
    phno=new TextField();
    conp=new TextField();
    email=new TextField();
    fax=new TextField();
    ccod.setBounds(200,120,150,50);
    cname.setBounds(200,200,150,50);
    add.setBounds(200,280,150,50);
    phno.setBounds(200,360,150,50);
    conp.setBounds(200,440,150,50);
    email.setBounds(200,520,150,50);
    fax.setBounds(200,600,150,50);
    Button save= new Button("Save");
    Button exit= new Button("Exit");
    save.setBounds(200,680,100,40);
    exit.setBounds(350,680,100,40);
    add(l1);
    add(ccod);
    add(l2);
    add(cname);
    add(l3);
    add(add);
   add(l4);
   add(phno);
   add(l5);
   add(conp);
   add(l6);
   add(email);
   add(l7);
   add(fax);
   add(save);
   add(exit);
save.addActionListener(this);
exit.addActionListener(this);
setVisible(true);
addWindowListener(new WindowAdapter(){
public void WindowClosing(WindowEvent w) {System.exit(0);}});
public void actionPerformed(ActionEvent ae)
Customerdetails cud= new Customerdetails();
if(ae.getSource()==save)
s1=ccod.getText();
s2=cname.getText();
s3=add.getText();
s4=phno.getText();
s5=conp.getText();
s6=email.getText();
s7=fax.getText();
try
      String query = "insert into Customerdetails (Customercode,CompanyName,Address,PhoneNumber,Contact person,EmailAddress,FaxNumber)"+ "values('"+s1+"','"+s2+"','"+s3+"','"+s4+"','"+s5+"','"+s6+"','"+s7+"')";
      Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
      con=DriverManager.getConnection("jdbc:odbc:prism");
      stmt=con.createStatement();
      rs=stmt.executeQuery(query);
      stmt.close();
catch(ClassNotFoundException e)
System.out.println(e);
catch(SQLException e)
System.out.println(e);
else if(ae.getSource()==exit)
System.exit(0);
else
System.exit(0);
public static void main(String args[])
   Customerdetails cud= new Customerdetails();
}

This doesn't look right:
,FaxNumber)"+ "values(because it's equal to ,FaxNumber)values(and your SQL server won't understand it, put a whitespace between.
/M

I have the iPhone 5s. I synced it with my Mac and got all the old apps from my old phone. I was not able to update any of the apps on the old phone and they will not update on the new iPhone 5s either! What can I do?

I have the iPhone 5s. I synced it with my Mac and got all the old apps from my old phone. I was not able to update any of the apps on the old phone and they will not update on the new iPhone 5s either! What can I do?

Hey there rmflint,
It sounds like you are wanting to update the Apps that were synced over from your computer to your new iPhone 5s. If you are clicking Updates in the App Store in the bottom right corner, would you mind clarifying what happens when you are trying to update them?
App Store at a glance
http://help.apple.com/iphone/7/#/iph3dfd8c19
Thank you for using Apple Support Communities.
Take care,
Sterling

Not updated in the table RBKP

Hi,
I have created an append on the tables RBKP_V and RBKP.
I am parking a vendor invoice in transaction MIR7.
I'm using the BADI BADI_FDCB_SUBBAS04 to enhance MIR7 transaction. I have followed the BADI documentation.
When I click on 'Save as completed' button :
The customer fields are not updated in the table RBKP.
Whats the solution ?
Best Regards,
Ramesh.S

Hi, In my opinion, some of Custom fields should move to corresponding field in user exit to update to table.
Example . you have add a field that zzabb into vbak , you should add code like move struct-zzabb to xvbak-zzabb.
**"struct" is from screen field you be inputed

IMovie '11 How do I recover a project that appears within the IMovie Projects folder but does not show in the Project Library?

I have had my MBP for just over 3 months now! Yes, I made the switch and up until now I have been quite happy.
I now have my Time Capsule, Apple TV running and am generally getting used to life as a Mac user.............even bought Aperture and loaded all the family photos. Now time to make some Travel movies.
I have been working on a particular IMovie project for a few weeks now. Size is 365MB. Yesterday I closed IMovie and when accessing later that project is not available in the Project Library window. It does appear in the IMovie Projects folder but I cannot open it. I have copied the file to DVD just in case. All up I have 4 Projects, the other 3 are practice files, smaller but they do appear in the Project Library.
I have scoured the bulletin boards and tried many suggested fixes to no avail. Main suggestion was to remove the following files from Library/Preferences
com.apple.iMovieApp.plist
com.apple.iApps.plist
However, this did not sort out my problem. In the end I put back the original files.
Does anyone have a straightforward fix for my problem or is this one of those ongoing issues that that needs Apple's attention.
After all the file is there with the others. They are available.
I realise that I can restore from Time Capsule but I am missing the last three days thanks to 'drop out'.
Thanks.......

Gweggie Boy wrote:
Yes, considering we have an ongoing 'glich' within an Apple program with no obvious solution, we should be able to direct it straight to an Apple rep. I will peruse this possibility when I get a moment.
You can report the problem by providing feedback to Apple. In the iMovie app, from the menu select iMovie > Provide iMovie Feedback. This will take you to an Apple page where you can complete a form and submit it to Apple.
The fix for this will probably turn out to be simple/easy.....................so why doesn't Apple comment and/or address it????
Other than the forum moderators, Apple doesn't normally monitor these forums, nor make comments on posts. So, it's up to us to report the problem to them directly (using the feedback form mentioned above).
As the problem has affected me just the one time (touch wood), I haven't bothered to report it as yet. But, after seeing your posts on this, I'm now reconsidering that. Something must be triggering it. My system is in pretty good shape, so I'm guessing it must be a glitch of some sort, either in Mountain Lion or in the iMovie app itself. Perhaps it's a 3rd party app causing the problem? It doesn't give us much confidence now, in that we may start worrying about losing other projects.
A good practice is to duplicate the project from time to time (something I'll be doing more of), although Time Machine backups also provide the necessary security. To duplicate, in Project Library view (where all the projects are listed) click on the project name so that it is highlighted, then select File > Duplicate Project. Alternatively, right-click (or Control-click) on the project name and select Duplicate Project from the pop-up menu. Of course, you may already know this. Duplicating probably won't guarantee that the copy will not also disappear from the Project Library, but is worth doing anyway.
As I mentioned in the post I linked to earlier, when the problem arose with my iMovie project I was using ProRes 422 clips I had imported from a Final Cut Pro X Event. My immediate thought was that ProRes 422 had caused the problem. But this of course may have been coincidental - reinforced now by your experience, where you are probably working with Apple Intermediate Codec (AIC) clips.
Anyway, glad to hear that you've recovered your project through Time Machine. Unfortunately, I had to start from scratch as I had Time Machine turned off during my editing sessions (that's a story for another day).
John

Data Migration Opening Balances are not updating in the Report F.08

Hi,
We have uploaded the GL balances in 2008 for the year 2007. But they are not updating in the F.08 report when i executed for 2008.
Why they are not updating in the report. In which table can i check the Data migration values in the system?
Thansk
Kishore

Hi We have uploaded all the values in 2008 with 2008 date. fiscal year is K4.
F.08 Report for the year 2008 is showing only 2008 accumulated values. But not showing the Opening balances which we have uploaded in 2008 for the before years like 2007.
Why it is showing like that?
Thansk
kishore

Roles are not updating in the GRC 10.0 System.

Hi
We had created Z role in ECC system and Ran the Sync Jobs in the GRC 10.0 System .
But the role created in backend System(ECC) was not updating in the roles of the GRC system.
Can any one provide right solution.
Thanks

Hi Wipro Basis Team
On running the sync job what are you expecting to occur when you say the roles are not updating in GRC System? I wonder if you are expecting a different outcome to the purpose of the sync jobs.
Regards
Colleen

Sp L records are coming to the PSA and not updating in the data target

Special Ledger records are coming to the PSA and not updating in the data target in the month end and the info package is failing - because of that we are doing manual updating from PSA to the data target -
Can so one can tell the reasons why this is happening? And give the solutions to it?

Hi Sankar,
If your Infopackage uses Only PSA and Update subsequently in Data Target on the Processing tab, then you will need to add a process for Read PSA and Update Data Target in your process chain, after the Infopackage load process. Then it will take data from the PSA and load to the data target.
Hope this helps...

My contacts are not updating from the iCloud. How can I actively go and retrieve them?

My contacts are not updating from the iCloud even with "push" on. How can i actively go and retrieve them?

Hello there, Lk354.
The following Knowledge Base article offers up some great recommendations for troubleshooting issues with using iCloud Contacts:
Get help using iCloud Contacts
http://support.apple.com/kb/TS3998
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

TS3992 Changes to my notes, contacts, etc., on my iPhone are not updating in the Cloud after back up

I upgraded to iPhone 5 but when I back up the Cloud (both wifi and plug-in), changes to my notes, contacts, etc., that I've made on my iPhone are not updating in the Cloud

Hi Gorm019,
If you are having issues with Photo Stream, you may find the following articles helpful:
iCloud: My Photo Stream FAQ
http://support.apple.com/kb/ht4486
iCloud: My Photo Stream troubleshooting
http://support.apple.com/kb/ts3989
Regards,
- Brenden

TS3276 Yahoo! sent mail not updated in the server.

I have an issue with Yahoo! Mail. When I'd sent email from my Mail from my mac book air, it can be sent but a copy is not updated in the server, thus when I view from the web or other device I can't see it as it is not updated. I've checked the "store sent msg in server" in the mail preference.
I don't this issue with exchange and gmail.
Thanks

Right that is how the POP email protocol works. If you want all mail sent and received to always be on the Mail Server then you have to use a mail provider that allows, uses, either IMAP or MS Exchange.

Revenue not update in the project

Similar Messages

Maybe you are looking for