Revenue Recogntion - what is consequence of activating in test environment

We are about to setup RR, we have a lot of transaction in test environment for the item categories we will use RR with. What is the consequence of this?
We have no transactions for the type in production environment.
Regards

Hi Simon - there would be no effect on the earlier orders which use the Item category assigned for RR purposes - so even when you move to production, it becomes effective for all new orders created.
However, while testing, find out what happens to:
1) Orders processed which were created before RR set up
      a) partial orders processed before RR
      b) Full open orders processed before RR
2) Orders processed which were created after RR set up
when you see the order document flow, you get the results - also you need to check the accounting document to  ensure correct postings.
cheers
Nandu

Similar Messages

  • SSAS Strange Performance Issues (Long running with NO read or write activity) - UAT Test Environment

    Hi All,
    Im looking for some pointers, my team and I have drawn a blank as to what is going on here.
    Our UAT is a virtual machine.
    I have written a simple MDX query which on normal freshly processed cube executes in under 15 seconds, I can keep running the query.
    Run 1. 12 secs
    Run 2. 8 Secs
    Run 3. 8 Secs
    Run 4. 7 Secs
    Run 5. 8 Secs
    Run 6. 28 MINUTES!!
    This is on our test environment, I am on the only user connected and there is no processing active.
    Could anyone please offer some advice on where to look, or tips on what the issue may be.
    Regards,
    Andy

    Hi aown61,
    According to your description, you get long time processing after executing processing several times. Right?
    In this scenario, it's quite strange that a processing take long time. I suggest you using SQL Profiler to monitor the event during processing. It can track engine process events, such as the start of a batch or a transaction, you can replay the events captured
    on the Analysis Services instance to see exactly what happened. For more information, please refer to link below:
    Use SQL Server Profiler to Monitor Analysis Services
    If you have any question, please feel free to ask.
    Regards,
    Simon Hou
    TechNet Community Support

  • What is use of Active mapping in ODi interfaces?

    hi,
    What is use of active mapping in ODI interfaces ?
    What are the advantages of using active mapping?
    If active mapping is not used in ODI ,would it affect ODI code in some sense?
    Thanks,
    Mahesh

    MaheshGx wrote:
    hi,
    What is use of active mapping in ODI interfaces ?This ask ODI to generate for for the mapped column . Other wise no code will be generated .
    What are the advantages of using active mapping?If you want to generate code use active mapping .
    If active mapping is not used in ODI ,would it affect ODI code in some sense?
    It will not generate the code
    Thanks,
    Mahesh

  • HT4623 what is waiting for activation mean, after factory reset

    what is waiting for activation mean after doing a factory reset, how long does it take

    Has your iPhone been jailbroken or otherwise hacked?

  • How do I show what menu title is active, e.g. current page, in spry navigation?

    How do I show what menu title is active, e.g. current page, in spry navigation?
    See website http://dorsay-easton-indian-law.com/index.html
    I want to have Home menu title have a different color when on index.html and so on. I keep using the term "active" for that, and "hover" for mouseover. Is that correct? And what do I need to do so that my menu displays an indication of which page is the current one?

    The CSS pseudo-classes in order are:
    a = any link
    a:link = an unvisited link (normal state)
    a:visited = a link after it has been visited
    a:hover = on mouseover
    a:active = on click
    a:focus = reached with tab key
    See persistent page indicator on menus:
    http://alt-web.com/Articles/Persistent-Page-Indicator.shtml
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists 
    http://alt-web.com/
    http://twitter.com/altweb

  • Hi, My computer has started to talk to me. Every key I touch it tells me what it is, any activity t all it repeats it, for example "HTML Contact" when i go online. I can't find where to switch off this preference?  It's an iMac G5.

    hi, My computer has started to talk to me.  It's an iMac G5. Every key I touch it tells me what it is, any activity t all it repeats it, for example "HTML Contact" when i go online. I can't find where to switch off this preference? Any ideas?

    Turn off VoiceOver in the Universal Access pane of System Preferences.
    (60017)

  • How to detect what keyboard is currently active on desktop?

    Hi there, I'm working on a virtual keyboard (window with buttons as keys) for my swing application. When I show keyobard window I would like to adjust the layout of my virtual keyboard to system keyboard that is currently active on desktop. But I don't know how to detect what keyboard is currently active. How to detect this? Thank you.

    I answered my own question - see
    http://forums.ni.com/t5/LabVIEW/Loading-and-Running-a-VI-on-a-cRIO-from-a-PC/td-p/796657
    On the Real-Time CompactRIO Properties > VI Server, you must check the box for TCP/IP protocol, which by default is unchecked.
    Also, when you make a Build Specification for a VI and set it to run on startup, you can still enter the VI name (not c:\ni-rt\startup\startup.rtexe) as the VI Path on the Open VI Reference.

  • What are the things to be test in Portal Upgrading the ECC from 5.0 to 6.0

    Hi ,
    I never been as part of the ECC upgrade project. we are going to upgrade our ECC system from 5.0 to 6.0.  Also we have SAP portal in the landscape. Can any body guide me for the following points related to testing the Portal once ECC upgrade is done.
    What is the approach need to be followed.
    What are things need to be tested.
    what kind of test scripts need to be created.
    Please provide your suggestions and ideas..
    Thanks
    vijay

    Hi,
    In Upgrade you need to do all integration testing and check all functionalities.
    Thanks
    Sunny

  • Hi, we need to create the test environment from our production for oracle AP Imaging. we have soa,ipm,ucm and capture managed servers in our weblogic. can anyone tell me what is the best way to clone the environment, can I just tar the weblogic file syste

    Hi, we need to create the test environment from our production for oracle AP Imaging. we have soa,ipm,ucm and capture managed servers in our weblogic..
    Can anyone tell me what is the best way to cloning the application from different environment, the test and production are in different physical server.
    Can I just tar the weblogic file system and untar it to the new server and make the necessary changes?
    Can anyone share their experiences and how to with me?
    Thank in advance.
    Katherine

    Hi Katherine,
    yes and no . You need as well weblogic + soa files as the database schemas (soa_infra, mds...).
    Please refer to the AMIS Blog: https://technology.amis.nl/2011/08/11/clone-your-oracle-fmw-soa-suite-11g/
    HTH
    Borys

  • What are the things to be tested in sap xi server before going to use th

    1) what are the things to be tested in sap xi server before going to impliment first interface?
    2)what are prerequisites to be configured in xi server before implementing first interface?
    ragards

    Hi Dhanush,
    >>>>><i>1) what are the things to be tested in sap xi server before going to implement first interface?</i>
    >>>>><i>2)what are prerequisites to be configured in xi server before implementing first interface?</i>
    For both of your question the answer would be
    1. Check all the Post installation configuration has been done properly, with the help of the following links
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/95d7d490-0301-0010-ce93-c58f9a3cde0b
    http://help.sap.com/bp_bpmv130/Documentation/Installation/Configuration_Guide_FP.pdf
    2. Make sure the latest BASIS Component have been imported into your design time environment
    After this you can start  developing your first interface
    Regards
    Ramesh P

  • Activating Windows 7 by using KMS Without the Active Directory Domain environment

    Dear,
                 Can we able to activate the Windows 7 O/S Machines by using KMS without the Active Directory Domain environment,As our some of the Computers will not connect with AD domain, we need to setup the speprate KMS
    server for this.
    Thanks
    Balaji K 

    You can point the KMS clients to the KMS host machine by opening an Elevated CMD prompt:
    and running slmgr /skms to point directly to the KMS host.
    You do not need a Domain controller.
    Volume Licensing: Key Management Service (KMS) Client Options:
    /skms <Name[:Port] | : port> [Activation ID] [Activation ID]                                                                                                          
    Set the name and/or the port for the KMS computer this machine will use. IPv6 address must be specified in
    the format [hostname]:port                          /ckms [Activation ID]                  
    Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
    the thread.

  • What triggers the prompt for memory test during boot up of WLC.

    I have a controller that sometimes does and sometimes doesn't prompt for memory test at boot up. What triggers the prompt for memory test at boot up?

    We have the same behaviour with a 4402 controller.
    After a software upgrade from 4.2.130.0 to 4.2.176.0 the controller didn't reboot automaticly during the first restart with the new software. I connected via console and saw this message:
    Airespace 4200 Wireless LAN Switch Board - Memory Test
    Invalid Option...Press any key to continue
    Airespace 4200 Wireless LAN Switch Board - Memory Test
    1. Restricted [4kB per MB]
    2. Entire Range [512M]
    3. EXIT
    Then I choosed option <3 Exit> and the controller started correct.
    Regards
    Hendrik

  • What r all the transactions to test an idoc

    What r all the transactions to test an idoc

    Hi
    Check thses sites..
    http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
    http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
    http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
    http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
    http://www.sapgenie.com/sapedi/index.htm
    http://www.sappoint.com/abap/ale.pdf
    http://www.sappoint.com/abap/ale2.pdf
    http://www.sapgenie.com/sapedi/idoc_abap.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
    http://www.allsaplinks.com/idoc_sample.html
    http://www.sappoint.com/abap.html
    http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
    http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
    http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
    http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
    http://www.sapgenie.com/sapedi/index.htm
    http://www.allsaplinks.com/idoc_sample.html
    Thanks
    Sasmita

  • What happens on my activation date?

    Hi, I just switched broadband to BT from Sky, and would like to know what will happen on my activation date???  Does my Sky broadband just stop?
    Sorry for the newb question
    Solved!
    Go to Solution.

    As long as the activation goes smoothly (it does usually), then yes.  You may well find that you are without broadband for a short time, or even for most of a day if you are unlucky.   I think it was less than an hour for me when I moved from BE.
    If the activation does not go smoothly then things can get quite bad.  The commonest reason for failure seems to be no-show by Openreach engineers.  Another one is BT screwing up the order and moving the telephone line over but cancelling your broadband order without telling you.  You can be without broadband for a few days, or in extreme cases for even more.  Read round the forum for a few horror stories and prepare for the worst just in case.
    Make sure you have explicitly cancelled your Sky, not just asked for a MAC code.  Asking for a MAC code is not itself a cancellation; people often ask for a MAC but then decide to stay with the old service.  BT will then force a cancellation, and Sky may charge you a cancellation charge.
    Good luck: I hope you are in the lucky majority.

  • What is the impact - Activating Change Logs for Material Classification Dta

    To activate Change Logs for Material Classification Data I must first set the flag for "Multiple Objs Allowed" for the Class Type 001 Material Class. I am curious of what the impact of setting this flag will be. Also, is there a way to measure the DASD impact of activating the Change logging for this data.
    Thankyou
    Kevin

    In addition to the performance impact the process of turning on Change Logs for Classification data will convert the tables KSSK and AUSP to use an internal SAP number as a key instead of the Material number. This will cause problems for any custom programs that access those files directly and expect the material number to be the key. This file conversion occurs during the execution of program RCCLUKA2 which is used to Flag the change logs for existing records. This can be reversed by running report RMCLINOB. Because of the above impact we decided here to NOT implement this change in production.

Maybe you are looking for

  • Problem Installing a LaserJet P1606dn on a printer server using the HP UPD

    I'm trying to setup a LaserJet P1606dn printer as a local printer on a 64bit Server 2003 print server.  I'd like to use the HP Universal Print Driver as the printer driver for Citrix compatibility (per the HP whitepaper entitled "HP printers supporte

  • Install fails at "Generating public key and SQL Server certificate"

    I'm attempting to install a Child Primary Site and am running into an issue. Currently there is a CAS and another Child Primary Site already deployed and running fine. I've re-installed the SQL instance for the Site I'm having an issue with as well a

  • Share an ASM disk group among multiple nodes

    According to Oracle documentation: *"To share an ASM disk group among multiple nodes, you must install Oracle Cluster ware on all of the nodes, regardless of whether you install Oracle RAC on the nodes".* And if I understand it right to share the sam

  • Share small real-time example using Narrowing Cast & Widening Cast

    Hi Guys, I am trying to understand the concept of Narrowing Cast and Widening Cast and getting confused why we are using these Casts. When we can always access the method of Subclass using its ref object in Narrowing ) and use the Super class with it

  • (10.9.4) iTunes 11.3.1 opening by itself?

    So how do I find out what process is launching iTunes while I'm busy doing other things? For instance, I could be watching a youtube video without my hands on my mac or any peripherals connected, when suddenly focus switches from the browser because