Revenue transferred from one WBS to Another

Hi ,
Is any realationship exists to check the revenue transferred and realted information from one WBS to another.WBS ? The main criteria is -From WBS to TO WBS for revenue transfer?
Thanks
Anil Kumar

CJI3 report with the field Partner Object should show you the sender and receiver WBS if revenues have been manually reposted.
Regards
Sreenivas

Similar Messages

How to transfer costs from one WBS to another WBS?

Hi,
I want to transfer costs from one WBS to another. Remember two currencies are maintained viz. local and group.
So how can i transfer the balance such that both the local currency and group currency balance gets transferred.
Please ensure that the transfer should show 0 balance outstanding in CJI3 report.
I need to transfer because WBS is holding some value which was not settled in the previous year.

Hi
You can transfer the Amount from One WBS to Another through KB11N. In this you Choose the Screen Variant as "_WBS/Network_" and do necessary steps.
Hope it helps.
Regards
Babu

Transfer cost from one WBS to another WBS

Hi,
I have transfered Actual Costs from one WBS to another WBS manually using transaction KB11N - Manual Reposting of Primary Cost.
But in S_ALR_87013542 report, Still the old WBS is visible with No costs.
What are the consequence of doing the transfer and where it will affect?
Can i delete the old WBS after transfer?
Thanks
Vinoth

Vinoth G wrote:
Hi,
>
> I have transfered Actual Costs from one WBS to another WBS manually using transaction KB11N - Manual Reposting of Primary Cost.
>
> But in S_ALR_87013542 report, Still the old WBS is visible with No costs.
Once you do a transfer posting system will pass a credit entry (negative value) to the old WBSE. so the net effect will be zero.

Moving NWA from one WBS to another and consolidated costs under WBS

HI,
I'm restructuring the project by moving released NWA from one WBS to another to aling actual costs with new budget categories.
After moving these NWA I run the report and found out that WBS element summarize costs even if there is no NWA under this specific WBS.
What field should I enable to allow WBS elements recalculate costs according to new NWA under these WBS.
Thanks,
Minsk2000

Hi,
Run CJEN to reconstruct project database.
Rgds
Abhinay

After Settlement, Cost not transfer from one WBS to another WBS in customer project

Hello Experts,
I am trying to settle cost from one WBS (i.e. XYZ-000014-1) to another WBS (i.e. XYZ-00001)in customer project.
Its a revenue type of project.
I have added 4 internal activities in an network under one WBS (i.e. XYZ-000014-1).
Got actual values after confirming activities, then settle that network cost on WBS (i.e. XYZ-000014-1) through CJ88.
Now while trying to settle that cost from WBS (i.e. XYZ-000014-1) to WBS (i.e. XYZ-00001) through CJ88, system not showing any result.
Kindly give ur valuable inputs.
Regards,

Kindly tell me that is it a standard functionality of SAP that through CJ88 we can transfer cost from WBS to WBS.
Technically ,Yes.Cost is actually transferred from one cost object to another cost object.
I hv discuss the same with some of my frds ...some are denying the same that its not a standard functionality of SAP to transfer cost on same cost object.
Instead of 'transfer' I would rather use the word 'settlement' . Practically, they are right as projects-WBS are temporary endeavors of companies, and cost can not reside on WBS permanently as it has to settle to some entity (organizational unit) which can be accounted during the reconciliation of their chart of accounts and balance sheets.
SAP has provided us an option to settle our cost to WBS and hence its standard . Generally, we use it when we have 1 WBS at level 1 and all lower WBS's costs is settled to this WBS . Here, we specify Level 1 WBS as the receiver of cost of these lower WBS.
Hope,I am clear here.
Regards
Saurabh

How to convert data when transferring from one table to another

I have two tables and these are the structure of the tables
create table E1(
ID NUMBER
,NAME VARCHAR2(30)
, DESIGNATION VARCHAR2(30)
,GENDER VARCHAR2(10));
create table E2(
ID NUMBER
,NAME VARCHAR2(30)
, DESIGNATION VARCHAR2(3)
,GENDER NUMBER); Now I want to transfer records from one table to another using a master tables where data are compared because the datatypes in tables are different
The first one is a gender table to match the gender and convert
create table Gender(
E1 varchar2(10),
E2 number);The second is for the designation
create table Designation(
E1 varchar2(30),
E2 varchar2(3);How to match and convert the data so that it can be transfered.

Peeyush wrote:
Can we do it with the help of a cursor.
All SQL executed by the database are parsed as cursors and executed as cursors.
I mean I have to insert data in bulk and I want to use cursor for it.The read and write (select and insert) are done by the SQL engine. The read part reads data and passes it to the write part that inserts the data.
Now why would using PL/SQL and bulk processing make this faster? It will reside in-between the read part and the write part being done by the SQL engine.
So the SQL engine reads the data. This then travels all the way to the PL/SQL engine as a bulk collect. PL./SQL then issues an insert (the write part to be done by the SQL engine). And now this very same data travels all the way from the PL/SQL engine to the SQL engine for insertion.
So just how is this approach, where you add extra travel time to data, faster?
and i want to commit the transaction after every 50 recordsWhy? What makes you think this is better? What makes you think you have a problem with not committing every 50 rows?

Data not transfering from one form to another

I have designed two forms in which i want to transfer data from one form to another which contains lot of fields.Process starts wid filling the first form(form1) from the workspace and all the data from dat form will be transfered to next level user who is having form2.Both forms contains two pages each.I tried with the SETVALUE ACTIVITY after designing two forms but its showing error.

No am not using any xml schema .i have designed the two forms with the same fileds and field names.what cpould be the problem.After submitting the task from the start process it is going to the next user level but the form is getting added twice in the to do list of that user and data is not getting bound.If u want i can sned u my lca files or forms.

Transferring from one ipod to another ipod, both 30gb video

Is there a way to transfer a music library from one ipod to another ipod. One ipod is used through windows and the other is through a mac. Help please

I figured it out. I was trying to get my daughters ipod song onto my wifes new ipod. New computer and didn't have them backed up. Thanks anyways!

Transfer from one WBS to another WBS

Hi Gurus,
I want to transfer actual cost from a WBS to another WBS with the Tcode KSW5 (execute actual periodic reposting).
In the sender fields I inserted a WBS and a "Cost Element". In the Receiver field Iinserted only a WBS.
I elaborate the cycle but the mesagge is: "the cycle doesn't include any sender"
Is there some parameter in the WBS that I have not listed?
Or is there any problem?
Thank you very much.
Lucidissimo

Hi,
Why don't you settle the actual cost incurred on the WBS to the required WBS? Search the forum and you will get number of threads on the same.
Regards,
Gokul

Vendor line items transferred from one vendor to another vendor

Dear SAP Guru's
My client created one vendor called "X" under General Vendor Group by mistake, now they realized that "X" vendor should be created under Related Party Vendor Group. Now they want all line items posted to that vendor should be transferred to New Vendor created under Related Party Vendor Group,
Can you please suggest how to go about the data migration in this case
Regards
Sreenivasulu

Hi Deepa
As you suggested we would be blocking "X" (Vendor No - 110001) old Vendor and create new vendor "X" (Vendor No - 130012) and what about transfer of line items existing in old vendor (Vendor No-110001)
my client wants to transfer all the line items (existing) of old vendor (Vendor No - 110001) to New Vendor (Vendor No - 130012) for entire year,
Simultaneously my client don't want to run the report by combining both vendors to know how much business has done with that particular vendor, because of that reason we need to transfer all the line items from old vendor to new vendor
Regards
Sreenivasulu

All sorts of problems transferring from one computer to another

This looked so easy on the Apple Website. I followed the instructions to the letter I am sure.
Just bought a new computer using Vista. Wanted to transfer a 16gb library from the old computer to another. Used the iPod as the hard drive to do so. Managed to get the files onto the new computer and opening the iTunes music folder from My Computer shows all the tracks are in there.
However, opening up the library using iTunes itself - nothing. Nothing at all listed.
I have checked the "Copy to library" thing in the settings - still nothing. Its like they are all in the right place (the folder identity is exactly the same as the one showing on settings i.e. iTunes Music). Nothing.
I even copied them into another folder and called it iTunes Music 2 and told iTunes to look there - nothing.
They are definitely in the new computer - if I click on a track from within the folder itself it will play - using iTunes - and then it appears in the library but the thought of doing this for 16gigs of music is not good. Why can't iTunes see them. I daren't plug my ipod into it now (I have changed it to manual by the way.)
To make things worse - I think I have lost half of my purchased tracks in the process. They are still there but I bought them under an AOL name and when I created a new Apple ID later...... it now wants to know all the details of the AOL account to authorise them. The AOL account doesn't exist anymore.
Help. Please.

These are two possible approaches that will normally work to move an existing library to a new computer.
Method 1
Backup the library with this User Tip.
Deauthorize the old computer if you no longer want to access protected content on it.
Restore the backup to your new computer using the same tool used to back it up.
Keep your backup up-to-date in future.
Method 2
Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
I'd recommend method 1 since it establishes an ongoing backup for your library.
Note if you have iOS devices and haven't moved your contacts and calendar items across then you should create one dummy entry of each in your new profile and iTunes should merge the existing data from the device.
If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
Should you be in the unfortunate position where you are no longer able to access your original library or a backup then then see Recover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data.
tt2

Are macbook apps transferable from one system to another?

If I install iworks in macbook pro now; and tommorow if i buy a new macbook pro, is it possible to transfer the i works app from the existing one to the new one?

http://www.apple.com/support/appleid/
https://discussions.apple.com/community/notebooks/macbook_pro
To install OS X Lion or Mountain Lion on another Mac, open the Mac App Store, sign in to your account, and re-download the OS by selecting it in the Purchases list. Follow these steps:
Download Lion or Mountain Lion from the Mac App Store on one of your personal authorized Macs. The download is approximately 4 GB in size.
Install the OS.
Log in to another computer that you wish to install it on.
Open the Mac App Store. Enter your Apple ID and password that was used to download either Lion or Mountain Lion on the first computer.
Click the Purchased icon, then click the download link for the appropriate OS.
Run the Installer once it has finished downloading to the new Mac.
http://support.apple.com/kb/HT4854
https://discussions.apple.com/community/mac_os/os_x_mountain_lion?view=discussio ns
I suggest you download it once, save the installer ESD package first before installing, and keep that to use again. You can copy it to flash drive and make an OS X installer too.
Create a bootable install drive for OS X Mountain Lion, make one manually with a USB drive or use the LionDiskMaker tool to automate the process with a USB or DVD
With the boot installer drive connected to the Mac, reboot and hold down the Option key
Choose the “Mac OS X Installer” startup volume from the boot menu
Select “Disk Utility” and choose the hard drive you wish to format, click the “Erase” tab, and then pull down the “Format” menu and select “Mac OS Extended (Journaled)” as the type, name the drive if you wish
Click the “Erase” button and let the drive format – this is the point of no return
When finished, quit out of Disk Utility and now select the “Install Mac OS X” option from the menu
Choose your freshly formatted hard drive and install Mountain Lion
When the Mac reboots you will have a clean installation of Mac OS X 10.8 to work with.
Another reliable method:
After you’ve downloaded the OS X Mountain Lion installer from the Mac App Store, launch LionDiskMaker and it will locate the installer app, extract the disk image, and then make the boot disk. It’s about as simple as it gets.
For USB install drives or SD cards the drive needs at least 8GB of space available. LionDiskMaker formats the drive you point it at, remember that when you are picking a disk to make bootable for the installer.
Get the newest version of LinoDiskMaker free from the developer

Are Keywords etc. transferable from one computer to another?

I'm working abroad at the moment using my laptop to manage my photos - usually at home I use another PC for my photography. If I organise my photos here by adding new keywords, ratings, metadata etc. are there any issues in transferring those criteria when I copy the files to my other PC when I get home?

I guess that I may have badly phrased the original question. I think the issue that I'm trying to resolve is that in Bridge you can set up a keyword hierarchy but when you open Bridge on another computer the keyword hierarchy (showing in the keywords panel) is different until you change it. So if I create a keyword hierarchy in Bridge on one computer is there any way that I can copy that hierarchy over to another computer?

Problem viewing mail transferred from one Mac to another

I recently purchased a new Mac. I used Time Machine to back up my old Mac, and then had it transfer all the information and settings from my old Mac to my new one.
One problem I've had is that when I open up Mail on my new Mac, none of the emails from my old computer can be seen. All the mailboxes and associated settings transferred over without a hitch, but none of the emails are visible. When I access the Mail folder (via Users/[My Name]/Library/Mail/V2), I can find the files of my old emails in the various subfolders; so they obviously transferred to the new computer. But I can't figure out why I can't view them.
Any advice or help on how I can solve this issue would be very much appreciated.

Quit Mail. Force quit if necessary.
Back up all data. That means you know you can restore the Mail database, no matter what happens.
Triple-click anywhere in the line below on this page to select it:
~/Library/Mail/V2/MailData
Copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder
from the menu bar. Paste into the box that opens by pressing command-V, then press return.
A folder window will open. Inside it there should be files with names as follows:
Envelope Index
ExternalUpdates.storedata
Move those files to the Desktop, leaving the window open. Other files in the folder may have longer names that begin as above. Move those files, if any, to the Trash.
Log out and log back in. Relaunch Mail. It should prompt you to re-import your messages. You may get a warning that the index is damaged and that Mail has to quit. Click OK. Typically, the process takes a few minutes, but it may take hours if you have gigantic mailboxes. In that case, you may be able to speed things up by temporarily adding your home folder to the Privacy list in the Spotlight preference pane. Remove it when Mail has finished importing.
Test. If Mail now works as expected, you can delete the files you moved to the Desktop. Otherwise, post your results.

HT1848 Transferring from one computer to another

I want to be able to move all my daughters iPod music, games, etc to my computer so I can help her manage it. It is currently on another computer. Can I do this safely without erasing everything she has?

iTunes: How to move [or copy] your music to a new computer [or another drive] - http://support.apple.com/kb/HT4527
Quick answer if you use iTunes' default preferences settings: Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive. Open iTunes and immediately hold down the Option (alt) key (shift on Windows), then guide it to the new location of the library.
Note: Using the above method you can have two iTunes libraries in one computer account and switch back and forth using the shift key startup method.

Revenue transferred from one WBS to Another

Similar Messages

Maybe you are looking for