Reverb And Delay Problems

Hi guys
I have a MAC 10.3.9 , Motu 828 , Logic 7
Im wondering if people have the same problems as me with Reverb and delay.. But mainly Platinum Reverb
I get the Reverb occuring 1 second after the wav file plays and it sounds more like a bang than reverb.. If I play the file 1 bar before the chosen reverb position it doesnt do it. But if I start the song from the start and let it run until it arrives at the bar it does this... I dont get this issue with any other plugings like Space designer
This problem I notice occurs also on previous Windows versions......
Is there also a fix up for dissappearing wav file windows when double clicking them?
Cheers Ivan

Does this only happen with a specific WAV file? Or with all WAV files? Have you tried converting the file to an AIFF in the Audio Window (or with some other app, like iTunes)?

Similar Messages

Delete Reverb and Delay Aux Channels

I want to save all the processor power I can, so I want to completely delete the default reverb and delay bussed aux channels that come up automatically when you start a new concert. When I select them, Delete is gray-ed out under the edit tab. How can I get rid of these?

Hi
These are Concert level channels, so to delete them you will need to select the Concert at the top of the Patch List.
You may also want to remove any associated Sends.
CCT

U16 Button and delay problems

Hi,
Im a bit new to labview and I was just looking through the examples.
I was confused about what the U16 button is and how you can place this
button on my VI
Also, as a secondary problem I also seem to have a bit of a delay when
using visas to write to a com port. Is this something that is
supposed to happen? I had a similar problem earlier with my NI daq
and i found out that i set the sample rate too high and it would not
output a value until the buffer filled with samples(as far as i can
understand at least). Is a similar thing happening on my VI?

Hi Phil,
why don't you make up your own example? Like the one attached... (Make sure the VISA constant is set to COM1 or the name of your serial port!)
On my computer it takes only milliseconds to run!
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome
Attachments:
Test_Serial.vi ‏24 KB

Server 2008R2 mapping to shared folders fails users of Windows 8.1 but seems OK on Windos 8.0 and no problems for Windows 7

Having read what I could from the related questions, the answers still elude me. This issue apparently is specific to Windows 8.1.
First, a little background.
1: The server is not on a domain, The system runs Server 2008-R2 standard with all folders shared across a standard "Workgroup" type network. They would prefer to
leave this layout intact.
2: The shared folders are nothing but Data files. There are no active system folders or anything used in an "active" environment. They are mostly Word doc, excel
files, pdf, txt, etc. However, due to the requirements of the software that needs to access these files, they Must
reside on a mapped network drive letter. Nothing else works due to the way the SQL database program stores the reference points back to the data.
I have had some success using what amounts to a “simulated” mapping using WebDAV to access the server. But access speed is a lot slower ad file size is limited.
3: The system has been configured as-is for the past 3 years with Users all on Windows 7 x64 (mixed OS, some Home Premium, some Professional) and the only problems that come up are when
access is through an ISP that blocks port 445. This was the original reason for finding a WebDAV/Cloud method just for those Users since they were unable to Map drives to anything on the Office Servers from their Home Internet even when using a VPN.
When Windows 8.0 became the only version available, I added a few users whose new laptops came with 8.0 from the vendors. While there were a very few minor problems, for all practical
purposes, I was still able to provide access to the mapped folders.
As the Windows 8.1 roll-out progressed, some users were successfully upgraded while others are still stuck in Windows 8.0. The issues with this seem to be hardware related and vary
depending on the Make and model of the laptop. I have been assured that eventually all of these will be able to advance to 8.1. But this delay has given me an excellent mixed OS environment for testing.
On the users who have not yet purchased new equipment and who are still using Windows 7. There has been no change. Their drive mapping is stable and they can always connect as usual.
Those blocked from lack of port 445 or still blocked. Systems inside the Office and those with ISP's who allow port 445 can use all mapped drives as normal.
Users who had Windows 8.0 and who have not yet been able to upgrade to 8.1 also have been unaffected. Same results as Windows 7.
Users who got the Windows 8.1 upgrade as well as those that came factory loaded with Windows 8.1 seem to be a never-ending list of problems. The ones that came native with 8.1 are worst
of all. The list of error codes runs through everything that has to do with “communication with the server”. As far as I have seen, this appears to be the issue.
Whether they are in the office on a wired network connection or at home on a Wi-Fi connection, the issues have the same results but the actual error codes may vary slightly. All of
them refer back to an inability to communicate with the server.
Nothing on the server has changed in any way. Users with Windows 7 continue to have zero problems, Users with Windows 8.0 seem to be doing fine as well. Only those with Windows
8.1 are affected and their problems are dramatic with everything from a total loss of drive mapping to misdirected data when the maps are active.
I have tried to make the drives automatically remap on reboot. I have tried registry modifications. I have done everything I can think of to make a difference but the results are the same
for every system using 8.1. The mapped drive letters invariably disappear. Sometimes while the system is in use ( I think I have been able to trace this to times when the system enters Sleep or Hibernate) but always when the system reboots.
One detail that might point to somewhere is that the "time to connect" when mapping the drive is so long that I believe some of the original failures were due to not waiting for a
minimum of 3 or 4 minutes to give time for the Shares to show-up in order to map them. Once the mapping is successful, the file access speed seems normal. But invariably, the drive becomes "unmapped" repeatedly each day.
I know this was a long question but I have tried to provide every possible detail for anyone who has experienced events like this who may already have a solution. I would even be glad
to purchase a 3rd party application if that is what it takes to get this to work. My next planned effort is to try using Server 2013 but I am afraid that might open another can of worms for those who still use Windows 7.
I have also been told that this is in some way related to the push to "Cloud" support in Windows 8.1 OS but I do not see where this would come in. I can say that this was the
one place where things continued to work as before. People who had Windows 8.1 and who had to use the CLOUD copies of our data are still able to connect to it with no problems.
Any suggestions appreciated. Preferably those that would not need extensive changes to the basic network structure. This "workgroup" consists of less than 25 users and any
extreme measures would be hard to justify

Hi，
I sugget you try to ping server so that we can verify the connectivity.
Can windows 8.1 access Windows Server 2008R2?
Also,please check the event viewer to see if some error log appeared when the issue occurred.
Regards,
Kelvin Xu
TechNet Community Support

Please Help! 10.6.8 Update and subsequent problems

On Friday, 2/10/2012, the Software Update popped up and informed me that new updates were ready to be installed on my MacBook Pro.
I clicked the update button and the updater installed the following updates:
iTunes v10.5.3
Security Update 2012-001 v1.1
MacBook Pro Video Update v1.0
Remote Desktop Client Update v3.5.2
Keynote 5.1.1 v5.1.1
Safari v5.1.2
Java for Mac OS X 10.6 Update 6 v6.0
Soon after installation Safari started crashing whenever I opened new tabs. I reset Safari and that problem went away.
I also run a Virtual Machine (Windows Vista imported from a Sony Vaio). The virtual machine has never had a problem and I used it on Thursday before the update and it worked fine. However, after the updates, I can no longer use the virtual machine. It has been corrupted. I get a message that says "Unable to Access Hard Drive 1: input/output error."
Then my whole Mac started running slow, especially Safari. In Safari, pages are slow to load and I get the spinning color wheel (or "beach ball," as I have heard it referred to) when I'm on any web page. Pages take long to load. After they load, I still get the spinning color wheel consistently.
Other programs are somewhat slower to load, as well, and when switching between open programs, there are delays and even more spinning color wheels and beach balls.
My computer has never had a problem until after I installed those updates.
I have repaired permissions and I have also re-donloaded the combo straight from the Apple website, but that did not work.
Is anyone else having this problem? Or has anyone else had this problem? What to do?
Thanks.
And, uhm, no- I did not have Time Machine set up, unfortunately.

Grant, thanks for the reply.
I have NOT been considering a new hard drive. My MacBook Pro is not even two years old, yet (I bought it in May 2010). So, the thought of having to replace my hard drive within 2 years has not even entered my mind and (as I stated) I only started having these problems within the past 2 weeks after having installed the latest updates via Software Update.
Really, if my Hard Drive needs to be replaced after less than 2 years of light use, then I will just chalk this up as a lesson learned and just not buy another Apple product and would probably just buy a Windows-based laptop rather than replace the HD in my MBP.
I am working on transferring my files (the ones that will still open and/or copy) to an external hard drive and doing a clean install of my OS X. I also am trying to figure out if I can somehow manage to save my pics that will not copy to the external hard drive but are saved on my iPad before I do so.
I'm not a computer or Mac genius by any stretch of the imagination, but I do appreciate your reply and advice. Unfortunately, I don't have any idea what it means to re-write a "wvwey block with a known-good pattern." Is that something I have to do manually? You stated that the option is in Disk Utility. Is "write zeroes" an option that you can select or is something you have to input manually? Can you break it down in simple terms for me or give me some step-by-step instructions or a link?
I apologize for my ignorance, but (again) I do appreciate your replay and advice as well as that of HackInt0sh.
Thanks.

Can't open PDF's in MyPDFs or Kindle from within Safari and other problems

When viewing a PDF within Safari, I am unable to execute a "read with" in MyPDFs or Kindle (I don't have iBooks). I have ios 5. I've also been experiencing delayed keystroke response times and delayed lookups such as for contacts. Keystrokes seem to be off in my touch screen too.
It was intermittent before but now all the time and getting worse.
I have already tried a reset which used to fix all the problems but now doesn't.

have the same problem (click on PDF->opens but is black; left click it->it downloads fine and opens in preview);
machine pb-g4 running 10.4.11
this is the machine of my wife, she says it is happening since a few weeks; not sure what I installed over this period, guess the ->10.4.11, but not sure

AVReceive3, AVTransmit3 and RTPSocketAdapet problem!!!

In RTPSocketAdapet I have modified the inner class that handles the RTP media data (SockInputStream). In the read(byte,int,int) method I save the incomming data to disk. The files are RTP packets and looks good. I use AVTransmit3 to transmit a wav file.
After saveing the transmitted packets I constructed a class that just sends the saved RTP packets. It works fine to get the transmitted packets with AVReceive3 and it also work to play it.
Now to the problem:
If I in AVReceive sends the saved packets in the send function everytime send it called by the framework is does not work. I get a result out from it but it is not in any way equal to what it should be.
The resultning file just contain burst of sound, not a continuesly "curve " as the original file.
I have tried with different buffer size and delaying different part in the read method but nothing helps.
Someone that know what the problem is?
/Tec

If I understand, you transmit from one system, capture on another.
The captured system displays the video correctly.The captured system, then saves the RTP packets to a file.You play the file, or transmit it, and the video is garbled.
If I am correct, the garbled picture is because your RTP packets are out of sequence.
You may be saveing the rtp packet data, but are you saving them in the correct sequence?

PSE 7+ Sudden Animation Time Delay problem?

I've been using Photoshop Elements 7+ for a long time now. And I've been able to make animations with it. Such as can bee seen on this url: http://i47.tinypic.com/35iumww.gif I know how to change the Time/Frame delay settings quite fine. But as of today my time delay hasn't been working. This is quite random considering I haven't done any kind of updating or editing to the program in general. When trying to set the time delay to 0.15 and clicking the preview button, I find that my animation is as at the default number's speed, 2. Upon changing the time delay many different times, from 0 to 10 (the min and the max), the animation's speed still doesn't change. I'm at the end of my rope with this and none of my PSE educationed associates know what could possibly be wrong. I did download two fonts today, but that's it. So unless someone might be able to figure out what's changed, then I might have to try and re-install the program. Something I don't want to do. I have a visual if that's of any help.
http://i47.tinypic.com/e9w64k.png
Also, I am using a Mac.

Which version are you using now? You can't be using PSE 7 on a mac, because there is no PSE 7 for mac. The frame delay problem exists in the mac versions 6 through 10. You can either upgrade to PSE 11 or use a program like the free giffun from stone.com to assemble the gif and set the frame rate.

What I've noticed about the Video Delay Problem of...

I was able to take a look at my old vids from way back V110. I've noticed everytime they improved the camera pictures, the video & audio sync suffer. My old videos didn't have audio delay problems even if they were more than a minute long.

I ordered 2 iPhone 4's from the AT&T Premier site on July 9 (my company has an agreement with AT&T). My credit card company immediately flagged the purchase as possible fraud, so it took a day or two to clear that up. The order went to "Processing" status on the AT&T Premier site on July 12. It stayed in that status until yesterday, July 20, when it changed to a status of "Shipped" and I got an email from AT&T with the FedEx tracking number. FedEx says that the phones shipped from Texas yesterday night and are on schedule to be delivered to me in Connecticut today (July 21). That's only 8 business days and includes the screw up from my credit card company - better than I expected. The "Processing" time probably included the time it took to ship the phones from Apple's factory in China to the AT&T facility in Texas.
By the way, here's the deal I got from AT&T Premier:
$38.50 - 550 shared minute plan (1st iPhone)
$ 9.99 - Additional line (2nd iPhone)
$19.25 - 2Gb personal data (1st iPhone)
$19.25 - 2Gb personal data (2nd iPhone)
$ 0.00 - pay as you go texting

How to fix the delay problem while recording? Can't set the Latency to 0. Win7, CS6,Realtek,C03u Mic

I am using Win7, with CS6, Realtek soundcard and Samson C03U microphone.
There is a problem that's really been bothering me. When I record songs the recorded audio always comes 0.1 seconds after where it's supposed to be and I need to fix the problem every time. How to fix the delay problem while recording? I can't set the Latency to zero. The minimum is 30ms and I still get an obvious delay.
I saw some previous discussions saying that installing ASIO would help. Is it gonna work on my PC?
Thank you in advance guys.

You probably should look at a more 'serious' audio interface rather than the Realtek
Yes ASIO drivers are the way to go
If you want zero latency you need to monitor via your audio hardware (hence the 'serious' audio interface suggestion)
There are a heap of reasonable audio interfaces which will do the job for you that are pretty inexpensive and I'm sure that someone will jump in with a suggestion

HT6114 Delaying problem when switching desktop

After upgrading to Mavericks v10.9.2 Update my "Macbook pro Retina, 15-inch, Early 2013" is delaying when switching desktops or switching to mission control. An overall delay problems occured. I need help!

First off, I meant to title this "When switching spaces application window is not showing."
Just in case anyone else runs into this problem or any other weirdness with switching between spaces, the answer seems to be trashing the com.apple.dock.plist file and then restarting the dock. The preferences file can evidentially get corrupted and create some problems. Spaces does not have it's own plist file but stores it's data in the dock's plist file. Be warned that this will reset all of your dock preferences including which apps you have on the dock.
Mark

Echo and delay

we have received complains from our endpoints user that they are experiencing echoes and delay for their CIPC and IPT. What is the common cause of this problem? which device in the voice architecture need to check or investigate? what is the best approach in handling and giving resolution for this kind of problem? thanks.

If the call is going through the gateway, you may want to check out this doc I wrote up a bit back. It will help you narrow down the problem for PSTN calls.
Most of the CIPC users are home or teleworker types, and the most common place to look is the 800 series router that is commonly at home. You'll want to enable hierarchical QoS to shape towards the provider's speed if this is the case.
Otherwise, if it's just CIPC-IP phone calls locally on your LAN, I would upgrade the phone loads on both sides to see if it helps.
hth,
nick

X-Fi Midi Synth Reverb and Chorus Controller Is

I bought an X-Fi a couple of weeks ago, and I soon realized that midi effects controllers cc9 and cc93 (reverb and chorus) didn't work with the X-Fi hardware synths. I called CL Technical support about this and this is the response I got:
"I have spoken with our testers who say that the CC9-Reverb and CC93-Chorus amounts are set in theSF2 file. That value is typically set to hit 20% at maximum CC data entry (27). To work aroundthis, you will need to use NRPNs to set the amount to a greater level, or edit the SF2 contentitself. Please let me know if this information hel
ps.
No, it doesn't help, reverb and chorus effects in midi files are set with midi controllers #9 and #93, this is true of virtually every midi file available on the internet, including commercial midi files. CL's testers are wrong. SF2 files have embedded minimum amounts of reverb and chorus for certain patches, midi song files customize the amounts of reverb and chorus with controllers cc9 and cc93 to suit each particular song, and even change it during the song. Adding NRPN's involves editing the midi file by calculating the MSB and LSB for each desired value and adding four controllers for every channel of every song every time you want a change in the effects. Controller cc9 and cc93 have control sliders or knobs in every major audio/midi multitrack program and these require no editing. A midi synth that ignores this loses much of its realism, and this just isn't acceptable for those of us who make serious use of midi song files. I have several thousand midi files and it would take months or even years to edit them all. This is a bug that may only affect a small percentage of X-Fi users, but for those it affects, it's a major bug. From the response I received from tech support, it appears that they aren't planning to do anything about it, so I thought I would publicize the issue here and see if I can't change their minds. I drove a 20 mile round trip and paid $40 for my X-Fi and I've had to pull it out of my computer and put my Audigy back in. I'm not a happy camper at this point, but if CL is going to fix the issue, I'm willing to wait for a while because I think thye X-Fi is worth it.

mriev wrote:
Maxing everything was the first thing I tried, and no go. Still so little reverb it was hard to tell if it was working, and no detectable chorus. I even went back with Vienna 2.4 and checked my soundfont again, and all was as it should be.
Putting together a brand new sound card is a major undertaking and it's understandable if something gets missed here and there, especially as most of the designers and testers probably aren't serious musicians. It's easy to see how this one could slip past, especially if they were using Soundfonts that have reverb and chorus programmed in to some of the instruments. Everything works fine until you start varying cc9 and cc92 and nothing happens. I haven't checked because I removed the X-Fi and put my Audigy back in, but it's a good bet that none of the midi effect controllers work properly. This is a relati'vely minor issue for most users, but for serious musicians who use midi, it's major. However, I'm sure CL will fix the problem as soon as possible. I just hope it doesn't take too long because the X-Fi is a really, really good sounding card, except for this one problem.
Gi've the X-Fi another try. I had these same issues at first but now cc9 and cc92 work in Sonar4.
These controls work, its just that the reverb is very low and the chorus has to be activated. In the effect editor choose the amphitheater preset as oppose to the default for reverb as it is the most audible.
follow these steps:
. choose creation mode
2. enable EAX effects and set to max
3. select amphitheater preset for reverb
4. activate the 5 bus buttons for chorus in master aux effects box (Front L\R, ect)
step 4 should work best for stereo setup
This should do it.

Audio (and other) problems noted with Keynote version 4.0.1

Since installing Keynote 4 and the 4.0.1 update, I have noted the following situations and/or problems:
1) When doing a "save-as" the filename is appended with the suffix ".key" but when I subsequently "save" this file, the suffix disappears. The file seems to open and operate OK nonetheless, but this puzzles and somewhat concerns me that someday Keynote may not recognize the file. This happens whenever I "save" a slideshow after I have made any changes to it.
2) When playing back a "soundtrack," the audio "glitches" frequently at slide transitions: this occurs repeatedly on my G5 desktop system but not on my MacBook Pro-17. The "glitches" always seem to occur at the same places in the track - which, of course, is also at the same slide transitions. (This problem has spawned several similar questions and threads in this forum.)
3) Related to #2 above, the "glitches" also interrupt or corrupt the "recording" of that soundtrack, so that the synchronization is off when the slideshow is played back.
4) If I want to have an audio track play under a series of slides, the only way I have found to accomplish this is to create a separate slideshow with the audio track running as a "soundtrack" and "record" the Builds and Transitions in sync with the audio. If I want to incorporate several of these shows together, I can create a "master" slideshow and Hyperlink each segment to the next. HOWEVER...
5) When I "record" a "soundtrack" and "synchronize" the Builds and Transitions within the slideshow, everything plays back properly in sync ONLY when the slideshow is played as a stand-alone presentation (i.e. a cold start from the desktop). If I initiate playback of the slideshow via a Hyperlink from another presentation, the soundtrack plays but NONE of the synchronization works at all.
6) The only way I have found to have an audio track "fade-in" or "fade-out" is to use off-line editing software to record these fades prior to importing the tracks into Keynote. The "Start Audio" Build function is simply a hard "cut" in, and the end of the track is a hard "cut" out.
These problems are consistent and repeatable facts. Whether they are "bugs" in the software or "design shortcomings" is uncertain. Nonethtless ...
At the risk of offending the moderators of this forum, I feel compelled to comment that these problems render the audio operations of Keynote less than satisfactory and should be addressed as soon as possible with another update to this visually stunning but audio-challenged application.

Well Ron S, I re-confirmed why I prefer not to look to tech support for support.
It seems to me that support's main function is to deflect any critical comments and push the blame back to the user.
Frankly, I have better things to do with my time and money than try to help a multi-billion dollar enterprise learn about itself.
So, for the benefit of you and the nearly 400 who have followed this thread, I offer you my latest and probably last attempt to have Apple acknowledge in some small way that "Houston, we have a problem".
I expect this reply will result in this thread being yanked as well, since I'm expressing negative thoughts about Apple's product and wishing they would do better, which is a non-technical gasp of utter frustration and disappointment. Note that "product" is singular, defining Keynote. My other Apple products serve me loyally and superbly, which is why my huge disappointment with Keynote.
So here is my correspondence with Tech Support. I've removed names except mine.
I think it speaks for itself. They have notes from my conversations with them that I have current Apple computers, including a MacBookPro, not an old PowerBook, nevertheless, they have told me that the problem is mine because the fabulous hyper-performing Keynote software is choking my poor old machine (paraphrased muchly).:
Hi (support),
That's disappointing news, especially since this test was done on 3 machines: an old G4 400, a 2.0G Dual G5 and an Intel core duo MacBookPro which yielded identical results.
It is not a hardware issue.
I do not accept a brush-off that it is my hardware that is causing Keynote to be problematic.
I will assume that Apple is not interested in addressing these issues in public and that Keynote is substandard software that is in need of re-authoring.
Sorry to be so blunt, but Apple has set this tone with Keynote, and used its considerable reputation as a leading a/v technology innovator to imply that Keynote will deliver the excellence we Mac users have come to expect.
I have been a loyal mac user since the SE series and have enjoyed success with the machines and software offered by Apple, and depend on them for my livelihood. I'm currently using FC Studio6 and know that Apple is capable of maintaining its high standards.
However, Keynote fails to do that, instead behaving like a product that was invented in a teenager's basement and is in beta. I realize that it's not designed as a FCP level product, but it fails at the basic tasks that you advertise it will complete.
A version 4 product should work as advertised. Keynote certainly does not.
I'm deeply saddened that Apple seems to have become an iPod entertainment company, interested mainly in profits from entertainment rather than serious useful technology.
On 2007-Oct-19, at 10:14 AM, (tech support) wrote:
Hello Sir,
Unfortunately, this does look like it's mostly a case of some of the new Keynote features slowing down the performance on the PowerBook.
At this point, there isn't much else we can do in the way of troubleshooting.
If you are not satisfied with the performance on the PowerBook, using the previous version of Keynote is probably his best option at this point.
We will continue to research this issue, but at this point it's unlikely I'll be able to find additional suggestions for improving performance, as it looks like it is is reproducible and limited to older models.
On Oct 16, 2007, at 11:27 PM, Ron Tucker wrote:
Hi (support),
Thanks for your recent followup calls. I'm directing a video shoot so am a bit preoccupied.
Here are the tests I mentioned.
These are as simple as it gets, and I think highlights the synchronization problem with Keynote.
Test 1 is straightforward, and demonstrates that a single unedited recorded audio track will maintain mouse click synchronization.
Test 2 is the same file, but with audio modifications applied to each slide in succession.
This demonstrates a dramatic synchronization slippage.
The visuals occur before the click (and audio) markers. Keynote seems to be create delay in audio at each "record and replace" point. This accumulates as the audio is revised in successive slides.
These tests demonstrate that there is a fundamental flaw in how Keynote handles audio in its most basic application.
This does not address the slim toolset available, such as lack of insert capability and other basic audio tools, which is a separate design issue, and I suppose subject to "request for enhancement" feedback.
I've reluctantly abandoned Keynote for my project work at present until these basic issues are addressed and it can be demonstrated that Keynote can successfully execute its feature set.
<TuckerKeynoteTest.zip>
Message was edited by: Ron Tucker1

Premiere freezing and delayed playback, plays audio after force quit

I'm working with 350 hours of AVCHD c100 and h264 from 5D. The media is on a thunderbolt RAID 1 and I'm running CC 2014 on a 2014 Mac Pro with 6 cores, 3gb GPU and 32GB ram.
After about an hour of editing, I get delayed playback, and delayed response from keyboard or trackpad input. I can save - and after that I've waited up to a half an hour while the program is frozen. If it froze during playback, the audio continues to play through the system even after force quit. The only way to start over is a system restart.
any ideas? I've had trouble moving projects in the past, and media cache issues were to blame for similar symptoms, but it's much worse this time

First two things to check are permissions and prefs.
Prefs: go to Documents/Adobe/Premiere Pro/8.0 and rename the folder "<username>-Profile." When you launch PPro, all new prefs will be written.
Permissions: fixing permissions problem that impedes start of Adobe applications | After Effects region of interest

Reverb And Delay Problems

Similar Messages

Maybe you are looking for