Reversal Indicator Field Not reflecting Correctly In BW

Hi All,
The deletion indicator coming from the DataSource  2LIS_02_ITM is not working properly for few entries and in BW its mapped to Reversal Indicator (Storno)
When we checked, we found that the deletion indicator is not working for the items which are non-statistical in a Purchase Order.
The problem is the Non statistical items when deleted in a PO in R/3, in EKPO table the deletion indicator is set to 'X' for these PO's but when extracted into BW the Reversal Indicator Field is coming as blank but it should be reflected as "R" as per OSS note 578471. But these changes are not getting reflected into BW.
Any suggestions guys?
Thanks.

AM,
Also, what is happening is that the record with KF's as negative and Reversal Indicator as "R" is coming in PSA as well as in New Data table, but when activated its disappearing from the new data table.
Finally its displaying in Change Log table with both the records i.e original one and the deleted one but again without Reversal Indicator "R".
--> This behavior very much fine. Datasource:2LIS_02_ITM is to load for CUBE not to ODS.
Please answer below:
--> Are you loading data into an ODS in Additive or Overwrite mode..?
--> 0RECORDMODE mapped to storn(cancel indicator...?)
If you load data into cube, then it works fine
Srini

Similar Messages

  • Reversal Indicator Field in View

    Hi All,
    I have created a View on VBAK, VBAP,VBKD, VBEP tables.
    DO i need to maintain reversal indicator field in This view.
    Can any body suggest me on this.
    Regards,
    Sri

    Hi
    I dont think you need to indicate.
    Regards,
    Chama.

  • Reversal Indicator field

    Hi,
    I have added Reversal Indicator(BKPF-XREVERSAL) field to my layout in FBL3N, but this field is not populating the values by default whenever I execute the report. It is populating the values only when I go the change layout option.
    Why system is behaving like that?
    Rgds

    Dear:
                After running the report FBL3N ,1st fetch the Revrsal Reason code from change layout button at its desired place, The go to Menu....Setting--Layout-Save the layout with name starting from /. Now go to same setting menu....Layout---Adminintration. Here check the layout  as defualt layout by selectinf the layout and pressing shift+F8. Now every time you will run report you will have the same defualt layout that you saved with reversal reason. Revert in case of confusion. You can also make the layout as user specific while saving it. Furhter make sure before running report that in the  List Output  the layout has been set the one you made... List output can be found in the main screen of FBL3N.
    Regards
    Edited by: Atif Farooq on Feb 15, 2011 2:27 PM
    Edited by: Atif Farooq on Feb 15, 2011 2:41 PM

  • QM03-Custom tab-Change to text field not reflecting-FG - XQQM-screen-0106

    Hi,
    I have a requirement to change the text field on a custom tab of QM03 transaction. Quality notification type is Z1 and the tab is "Checklist". Both are custom defined.
    The existing text field is of 3 lines. The new text message is of 8 lines. When I did the changes on the custom screen 0106 in the function group XQQM, the changes are not reflected on the QM03 transaction's custom tab. Only first 3 lines were reflecting the change and rest of the 5 lines are not appearing on the screen.
    Pointers on this will be definitely helpful.
    Regards,
    Mallika.

    I had a similar problem, but it was with the message line. I found that with Web Forms, I had to issue the Synchronize; a second time, but in Client/Server Forms 6i, the first synchronize worked. Here is the code I used:
    <pre><font face = "Lucida Console, Courier New, Courier, Fixed" size = "1" color = "navy"> SYNCHRONIZE;
    if Get_Application_Property(User_Interface) = 'WEB' then
    synchronize;--first does not work on web
    end if;</font></pre>
    Let us know if this works.

  • 802.1x accounting does not reflect correct port status

    Hi,
    I've just discovered an issue when trying to use MSFT supplicant and Cisco 802.1x accounting. This makes 802.1x accounting completely unusable.
    Facts:
    1. MSFT supplicant does not send EAPOL-Logoff messages and there's no way to enable this (btw. Aegis client does not send it either, except when disabling interface).
    2. I am doing machine authentication along with domain authentication.
    3. Windows XP SP2 is used with EAP registry hacks applied.
    4. PEAP/MS-CHAPv2 method is used.
    Now when the computer is started it is logged into 802.1x with 'host/machine' account and RADIUS accounting start is sent by the switch. That's fine.
    When a user logs on with its 'domain\user' identity, then EAPOL-Start is sent from the host triggering new EAP message exchange and the user is authenticated correctly. However the switch sends Interim Accounting still using 'host/machine' credentials which is obviously wrong.
    Even more bizarre accounting happens when the user subsequently logs off from the machine. The EAPOL-Start is sent from the host triggering new authentication process for 'host/machine' identity and the host is authenticated ok. The accounting being sent is:
    - first Accounting Stop for 'host/machine' User-Name
    - then strange Interim Accounting with most attributes empty or missing
    256970: Jul 10 15:56:41.211 MET-DST: RADIUS: authenticator 68 CA 1A 46 85 4F F5 95 - 87 B4 84 61 72 85 42 F3
    256971: Jul 10 15:56:41.211 MET-DST: RADIUS: Acct-Session-Id [44] 10 "013F0000"
    256972: Jul 10 15:56:41.211 MET-DST: RADIUS: Vendor, Cisco [26] 34
    256973: Jul 10 15:56:41.211 MET-DST: RADIUS: Cisco AVpair [1] 28 "connect-progress=Auth Open"
    256974: Jul 10 15:56:41.211 MET-DST: RADIUS: Acct-Session-Time [46] 6 0
    256975: Jul 10 15:56:41.211 MET-DST: RADIUS: Acct-Input-Octets [42] 6 0
    256976: Jul 10 15:56:41.211 MET-DST: RADIUS: Acct-Output-Octets [43] 6 0
    256977: Jul 10 15:56:41.211 MET-DST: RADIUS: Acct-Input-Packets [47] 6 0
    256978: Jul 10 15:56:41.211 MET-DST: RADIUS: Acct-Output-Packets [48] 6 0
    256979: Jul 10 15:56:41.211 MET-DST: RADIUS: Acct-Authentic [45] 6 RADIUS [1]
    256980: Jul 10 15:56:41.211 MET-DST: RADIUS: Acct-Status-Type [40] 6 Watchdog [3]
    256981: Jul 10 15:56:41.211 MET-DST: RADIUS: Vendor, Cisco [26] 24
    256982: Jul 10 15:56:41.211 MET-DST: RADIUS: cisco-nas-port [2] 18 "FastEthernet0/11"
    256983: Jul 10 15:56:41.211 MET-DST: RADIUS: NAS-Port [5] 6 50011
    256984: Jul 10 15:56:41.211 MET-DST: RADIUS: NAS-Port-Type [61] 6 Eth [15]
    256985: Jul 10 15:56:41.211 MET-DST: RADIUS: Class [25] 27
    256986: Jul 10 15:56:41.215 MET-DST: RADIUS: 43 41 43 53 3A 30 2F 32 39 32 66 2F 61 38 31 38 [CACS:0/292f/a818]
    256987: Jul 10 15:56:41.215 MET-DST: RADIUS: 30 32 38 2F 35 30 30 31 31 [028/50011]
    256988: Jul 10 15:56:41.215 MET-DST: RADIUS: Service-Type [6] 6 Framed [2]
    256989: Jul 10 15:56:41.215 MET-DST: RADIUS: NAS-IP-Address [4] 6 10.129.128.40
    256990: Jul 10 15:56:41.215 MET-DST: RADIUS: Acct-Delay-Time [41] 6 0
    256991: Jul 10 15:56:41.239 MET-DST: RADIUS: Received from id 1646/238 10.129.128.38:1813, Accounting-response, len 20
    256992: Jul 10 15:56:41.239 MET-DST: RADIUS: authenticator ED 8E 8B 15 28 5F E4 37 - BF A8 F5 9E 10 43 5E A8
    So that the accounting sent from the switch does not reflect current status of the authenticated user on a given port.
    How to deal with this issue? Any ideas?
    thanks,
    robert

    Does your radius proxy-table is populated wrong for EAP- SIM users ?

  • New field not reflecting in Table maintenance generator

    Hi Experts,
    I have added a new field in a ztable.I regenerated the table maintenance generator,so that the  new field is reflecting in devlopment system , also a TR got created.When i moved this TR to pre-production system new fields are reflecting in the structure of table but not in table maintenance generator.
    Please suggest solutions.
    Regards,
    Niranjan

    Hi Experts ,
    I have gone through the steps which is mentioned.But still issue is pending,the changes in TR are not reflecting in pre prod.
    Error after moving the TR with "Definition of a Maintenance and Transport Object".
    The current ABAP program "SAPLSVIM" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
    The following syntax error occurred in program "SAPLZFGL " in include "LZFGL$03
      " in
    line 13:
    "Field "ZCHAR_FIXED_WIDTH" is unknown. It is neither in one of the spec"
    "ified tables nor defined by a "DATA" statement. ."

  • SAP R3 FCC 6.0 - AR Aging FBL5N did not reflect correct balance

    AR aging report (S_ALR_87012173 Customer Open Items for printing) or AR Aging T-code  FBL5N did not show correcct balance which will show 100% original invoice balance even we applied the partial payment.  Anyone has same problem?  If not, what caused this probelm since I can not send statment to customers and need do it in Excel.  Thanks,

    Hi PPIO:  I used FBL5N but all partial payment did not deduct from original invoice if you short of 0.01 cent, that is why I am trying other reports from SAP.  How you retrieve data and create your customized reports in R3?  We will implement BW in April 2012 but do we need any report tool to create our own reports? 
    Our internal SAP administrator told me the FBL5N can NOT display correct balance due that is can not do task.  I can not believe it, Can you teach me why we got incorrect balance due and what caused the problem?  Tks.

  • Messages are not reflecting correctly

    Hi,
    I have created message ABC from the front end.
    later I have changed to content of the message, changed message content is not reflecting in OAF even after bouncing the apache.
    can any one help me to resolve this issue.
    Thanks,
    Mahesh

    hi mahesh,
    After changing message content in EBS , you need to close the jdeveloper and open again to see changed messages.
    where as in application(ebs) apache bounce required for changed content.
    Thanks
    vamshi.

  • Master not reflected correctly

    I have the master looking correctly but it is not reflexed correctly in the pages. The gray rectangle is behind the name in the master but it is infront on the page. See below:

    Hi Travis,
    Thanks for your feedback. This is a known bug that is part of a larger issue that we are working on. For now, the way to get around this is to group the logo image and the gray strip together.

  • "File Path and Name" field not displaying correctly

    Post Author: DaveWoo
    CA Forum: General
    Hello,Here's my situation: I'm currently upgrading from Crystal Reports for Visual Studio .NET 2003 to Crystal Reports for Visual Studio 2005. I have several reports (programmatically generated using VB.NET) that use the "File Path and Name" special field. Now, in the old version of Crystal Reports (2003), the field properly displayed the original file path and name; however, in the new version (2005), the field displays as "C:\DOCUME1\Username\LOCALS1\Temp\Filename{F2459406-3719-4C8B-917C-4A7055A18C76}.tmp" - in other words, the location of the temporary .rpt file.How do I get the "File Path and Name" field to correctly display the path & name of the original file, like it did in the prior version?- Dave

    This is a known issue tracked under ADAPT0000962216. At this time I do not know when this will be resolved, however Service Pack 2 for CR 2008 is targeted to be released by September and this may contain the fix.
    Ludek

  • PS 2013 - Changing the formula in custom field not reflected in the report columns

    Hi, 
    The company where I work have a Sharepoint environment / EPM 2013 with about seven hundred registered projects. 
    We have a customer demand where it is necessary to change the formula of one of the custom fields of the environment. This field is used in some management reports made ​​in Reporting Services and accessed by the entire board. The report uses as a source
    'MSP_EpmProject_UserView' view. 
    The change in formula was simple, but we found that the change will not be reflected in the reports when the user saves the project in Sharepoint or publish the schedule associated with the Project. 
    I believe this is the expected behavior of the EPM, but I wonder if there is some other way than through the PSI, to publish all environmental projects.  
    Best regards,
    Armando Machado Gonçalves - Sharepoint / EPM 2013

    Hello,
    That is expected, it will not update until the project is open and republished. No automatic way to do this without automating project pro. Publishing all projects via the PSI wont cause the plan to recalculate, the plans will need to be opened.
    Paul
    Paul Mather | Twitter |
    http://pwmather.wordpress.com | CPS

  • J1IIN reversal accounting document not reflected in SD document flow

    Dear Experts,
    I have created a billing document and then posted excise through J1IIN. When I reverse the Billing through VF11 there are two accounting documents generated(one for billing and other for Excise reversal). But the Excise reversal accounting entry doesnot update the table J_1IEXCHDR for which again i have to post a reversal for Excise through J1IH. So in order to remove the extra accounting entry for Excise reversal during VF11 we have applied Note No:-  551932 due to which the extra accounting document for reversal of Excise is not getting generated but the reversal of Excise made through J1IH doesnot get reflected in the SD document flow.
    Please let us know how to get this entry in SD document flow.
    Thanks & Regards
    Edited by: Aniruddha B Mahalle on Feb 13, 2012 2:45 PM

    Hi Vikas,
    Cancelling J1IIN excise invoice will by default take me in the transaction J1IH what i wanted to know is that can the J1IIN cancellation of excise invoice be shown in the SD document flow. If yes then please let us know the note number to be applied to it.
    Thanks & Regards
    Edited by: Aniruddha B Mahalle on Feb 16, 2012 8:07 AM

  • Embedded font in a field not printing correctly

    I have a field in my design that is configured to use Courier 10 pt. font. However, when the form prints it prints in a completely different font, Lucida Console 8 pt. When I test my presentment it prints correctly but when it prints through the Central agent it doesn't.
    Anyone have any suggestions as to what the problem may be?
    Thanks,
    Sheldon

    It doesn't make sense since Courier is a common font but it is possible that the specific font being called for doesn't exist on the PC running the print agent. If it doesn't exist, then it is possible that a substitution is occurring.

  • Numeric fields not aligned correctly in report preview

    Hi
    I have the next problem:
    On my report, I aligned the numeric fields to the right of a column, but when i run the preview on ASP, the numeric fields are aligned to the left.
    But when I export the report to PDF, the numbers align correctly.
    I figured out a workaround to this, introducing the numeric fields into text fields, since they do align correctly. The problem is that I have too many reports to apply this workaround to all of them.
    Could it be a known issue of Crystal Reports XI?
    Is there any other workaround?
    Thanks in advance

    Hi Poonam
    Maybe I wasn't quite explicit before,
    In preview mode my report displays correctly as well. The problem comes when I run it through an ASP, which is needed for my application.
    I'm running the CR version 11.5.0.313. I was asking if it could be a known issue of XI version because when I had version 9 I didn't have this problem.
    It could also be that through the time, I changed something in the way the report is displayed, and didn't realize about that before, but I haven't been lucky to notice any change related.
    Thanks for your time,
    Gil
    Edited by: Gil Gonzalez on Oct 21, 2008 12:11 AM

  • MultiLine fields not overflowing correctly on PDF

    Hi all. I have an issue where the sections that i'm appending into a multiple multiline field section overlay each other.
    So imagine three sections. One small .5" dummy section to start. One large 10" section with three multiline fields in it. There's a .5" footer. I append two sections into EACH multiline field in that large section. Depending on the fields in the sections, the last multiline will _have to_ overflow and it's two sections _should be_ on the 2nd page.
    The large section has 'can grow' and 'can split image' marked at the forms level. Position is rel/max+0. The footer is copy on overflow. The multiline fields have can grow and can span marked in their properties.
    _Results_ : When the last multiLine overflows, the text of the two sections in that last MultiLine field overlays each other on the 2nd page.
    Thoughts? ideas?
    I've tried adding "PaginateBeforeThisImage" section rule to a section in the last MultiLine field. No luck.

    Hi,
    Would it be possible for you to break the large 10" section into 2 smaller sections say 5" each. Size of the 2 smaller sections does not matter and need not be equal also; only thing is can you break them into smaller ones instead on large section having 3 multi-line fields in it?
    P.S: "PaginateBeforeThisImage" section rule is not required for this situation.
    Thanks.

Maybe you are looking for