Reversal of common input & input services used for exempted

Dear All,
Client need the transanction code for reversal of cenvat credit for common
input and input services used for manufacture of exempted goods
If is there any then please advice
Regards
BIJUDAS
Edited by: BIJUDAS on Feb 26, 2011 6:09 AM

Dear Bijudas,
Please try doing it is J1IH with Other Adjustment.
Enter the The document number for which you have to reverse the credit.
Select the concerned register
enter the amounts manually in the respective field.
and simulate and see if all are going to correct gl.
post it.

Similar Messages

What kind of input is used for my Mac mini?

Well I'm planning on buying a Mac mini and I was wondering which input like can be used so I could connect my Mac mini to my monitor (I'm not planning on buying the Thunderbolt Display monitor) like is there some type of input so my new Mac mini can work on my old monitor?

The Mini comes with an HDMI->DVI-D adapter. So, if your monitor
supports DVI-D you are set. If it supports HDMI, you just need an
HDMI cable.
If it only supports VGA, you will need a Display Port->VGA adapter.

Why is Mac local input method used for remote input box?

This behavior is observed on latest version.

Hi,
Can you describe more for your case as actual, what you want to perform?
Did you find any specific error\log for your issue?
Please try to reinstall the app and collect log from below path.
Microsoft Remote Desktop>About Microsoft Remote Desktop>Send log via email
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

I am having issues with my Rezound's service... not 4G or 3G but the regular service used for calling and texting.

Okay, so a few weeks ago my phone starting acting kind of weird. I had it off for a few days and when I turned it back on, I noticed it was not receiving very good signal at all in places where it used to have full bars. I can't make calls or send texts. I can receive calls but when I answer, the call is lost. It is basically just a pager now because I just have to call the people who call me or text me using a different phone. I can't even check my voicemail! 4G and 3G are working fine... When I have gone to the Verizon store TWICE, miraculously the phone all of a sudden has service but, of course, as soon as I leave it no longer has service. I have also called tech support twice to no avail. These people are of NO HELP and my phone is out of warranty. Unfortunately, informing them that ever since I got this phone back in January of '12, I had 5 replacements in the first FIVE months of having it because it had issues over and over again that could not be lived with such as not turning all the way on, not charging, etc. After the 5th replacement starting having minor issues, I ignored them and continued using the handicapped phone. Now, this is happening and I can no longer use it as anything more than a pager/internet browser! I read that the antenna is built into the battery cover of the phone but I don't know if that is just for 4G/3G or if it is also for regular service. If I get a replacement for the battery cover, will it possibly fix this issue??

Oh boy! Acting kind of weird seems to be an understatement, aquaequus!
What type of troubleshooting were we able to do with you? I want to make sure that we can get some sort of resolution for this problem.
It is quite possible the battery door may get your phone in working order again. I'm not sure if the store has it in stock, but it is available in our warehouse for $14.99 which can be ordered via customer service.
Tamara H.
Follow us on Twitter @VZWSupport

I'm trying to download the new OSX Maverick. It is asking for and administrator password. I have a common password that I use for all apple interfaces. It doesn't work here. What to do?

New to the community! I'm having problems downloading the new OSX Maverick. I come to last step and the system asks for the Administrator password.
I have not set one up separately from my Apple ID password. What can I do?

Reset the password first.
OS X 10.7 Lion, 10.8 MountainLion & 10.9 Mavericks
Reset Password using Recovery HD
Boot into Recovery Partition.
Start the computer,then press and hold down command and R keys to start into recovery partition.
When you see the Apple logo, release the keys.
Wait until OS X Utilities window shows up.
Move the mouse to the menubar at the top and click "Utilities", then select "Terminal"
from the drop down.
Terminal window will appear.
Type in resetpassword and press enter on the keyboard.
Leave the Terminal window open.
Reset Password Utility window will open with Macintosh HD selected.
Select the user account from the popup menu box.
Enter a new password.
Reenter the new password for the user.
Enter a hint.
Click the "Save" button.
Click  in the menubar and select Restart.
Log in.
If Keychain dialog box appears, select “Create New Keychain”.

Develop Text Input Service with Vistual Studio 2013 Express for Desktop

Dear All,
1 . Can we develop Text Input Service using TSF with Visual Studio 2013 Express?
2. How to deploy this text input service application onto PC or tablet? According to MS guideline(https://msdn.microsoft.com/en-us/library/windows/apps/hh967425.aspx), it seems we have to create an installer from Installsheild, then deploy this installer
to PC/tablet, but this is really inconvenient for debug purpose. Do we have other ways to deploy?

Hello,
>>1 . Can we develop Text Input Service using TSF with Visual Studio 2013 Express?
Since it is related with the Visual Studio, the VS forum is more proper for this question:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?category=visualstudio
>>but this is really inconvenient for debug purpose. Do we have other ways to deploy?
Since this is the official guideline, i think there could not be other approaches, or you could have a try with the ClickOnce whcih is easier than the installer:
https://msdn.microsoft.com/en-us/library/t71a733d.aspx
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Can a ComboBox be used for Text Input ?

Hi
In Ms Access the combo box can be used for text input for creating new lines in the Database instead of just being limited to the lines already there in the drop down list. Is this possible with the combo box available in Flex 4. If it is I haven't being successful in getting it to work.
Thanks for you help in advance
ParaicKW

I am using a Dataservices Commit method to write to the Database via a button on the screen
When I type into the ComboBox's text input and click outside the combobox or on the commit button the application effectively freezes
SituationService is a CRUD type servicePHP to MYSQL and it works with the Datagrid
Here is the code -
ParaicKW
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
 xmlns:s="library://ns.adobe.com/flex/spark"
 xmlns:mx="library://ns.adobe.com/flex/mx" minWidth="955" minHeight="600" xmlns:situationservice="services.situationservice.*">
 <fx:Script>
 <![CDATA[
 import mx.controls.Alert;
 import mx.events.FlexEvent;
 protected function Situation_creationCompleteHandler(event:FlexEvent):void
 getAllTblsituationResult3.token = situationService.getAllTblsituation();
 protected function dataGrid_creationCompleteHandler(event:FlexEvent):void
 getAllTblsituationResult.token = situationService.getAllTblsituation();
 protected function button1_clickHandler(event:MouseEvent):void
 situationService.commit();
 protected function vGroup_creationCompleteHandler(event:FlexEvent):void
 getAllTblsituationResult2.token = situationService.getAllTblsituation();
 ]]>
 </fx:Script>
 <fx:Declarations>
 <s:CallResponder id="updateSituationResult"/>
 <situationservice:SituationService id="situationService" fault="Alert.show(event.fault.faultString + '\n' + event.fault.faultDetail)" showBusyCursor="true"/>
 <s:CallResponder id="getAllSituationResult"/>
 <s:CallResponder id="getAllTblsituationResult"/>
 <s:CallResponder id="getAllTblsituationResult2"/>
 <s:CallResponder id="getAllTblsituationResult3"/>
 
 </fx:Declarations>
 <mx:DataGrid x="96" y="167" id="dataGrid" creationComplete="dataGrid_creationCompleteHandler(event)" dataProvider="{getAllTblsituationResult.lastResult}" editable="true" width="470" height="237">
 <mx:columns>
 <mx:DataGridColumn headerText="ID2" dataField="ID2"/>
 <mx:DataGridColumn headerText="SITUATION" dataField="SITUATION" width="200"/>
 </mx:columns>
 </mx:DataGrid>
 <s:Button label="Commit Updates" click="button1_clickHandler(event)"/>
 <s:HGroup width="90%" height="80%" verticalCenter="20" horizontalCenter="0">
 <mx:ComboBox width="476" id="cmbSituation" creationComplete="Situation_creationCompleteHandler(event)" dataProvider="
 {getAllTblsituationResult3.lastResult}" labelField="SITUATION" editable="true">
 </mx:ComboBox>
 <s:TextArea width="426" id="textArea" text="{getAllTblsituationResult3.lastResult.SITUATION}"/>
 <s:Button label="Back" click="cmbSituation.selectedIndex = cmbSituation.selectedIndex-1 ; textArea.selectedIndex = textArea.selectedIndex-1"/>
 <s:Button label="Forward" click="cmbSituation.selectedIndex = cmbSituation.selectedIndex+1 ; textArea.selectedIndex = textArea.selectedIndex-1"/>
 </s:HGroup>
</s:Application>

Access sequency for Input Service Tax Condition

Dear All,
I am running the deferred tax transfer programme in ECC 6.0 but I am facing some problem with the Service Tax Conditions. Now existing we have configured for all input service tax conditions access sequence JTAX.
If I use the MWST instead of JTAX...system does not calculate the Service Tax it gives error.So please provide me any solution or option for this....
Regards,
Sandeep

Hi
Maintain the Condition Record % at Tax code: FTXP
Regards
Prasanna R

Error: Common entries are not permitted for plan queries and input queries

Hi,
I have a 2 selections in the column struct:
1. year = 2005, version = actual
2. year = 2006, version = plan, marked as data can be changed using user entry or planning function
row has posting periods from 1-12
in the workbook I have inserted this query in the workbook in analysis grid. it runs good.
now i added a button and assigned planning function to it. this planning function copies 2005, actuals to 2006, plan.
when i execute the workbook and hit this button, it gives me following error:
"Common entries are not permitted for plan queries and input queries"
please can anyone provide me assistance with this issue.
thanks,
sam

when i go to diagnosis it displays following:
Diagnosis
InfoProvider ZIP_PLAN2 must be described in this application by both a plan query and by a input-ready query, which is directly defined on the InfoProvider ZIP_PLAN2.
System Response
This is not permitted.

Date Format on OWB 11.1.0.7 to use for input parameter for a mapping

All,
What is the Date Format on OWB 11.1.0.7 to use for passing in an input parameter for a mapping to execute?
I have tried '01-01-2010','01-JAN-2010','01.01.2010', 01/01/2010 and I get the following error:
Error RPE-01003: An infrastructure condition prevented the request from completing.
Error RPE-01038: Failed to evaluate expression declare l_expression DATE := 01/01/2010;begin :result := wb_rt_conversions.from_date(l_expression);end;. Please modify the expression, redeploy and retry again.
RA-06550: line 1, column 32:
PLS-00382: expression is of wrong type
ORA-06550: line 1, column 24:
PL/SQL: Item ignored
ORA-06550: line 1, column 90:
PLS-00320: the declaration of the type of this expression is incomplete or malformed
ORA-06550: line 1, column 51:
PL/SQL: Statement ignored
I am using a Mapping Input parameter object and have a START_DATE_IN as a DATE and an END_DATE_IN as a DATE
Any information you could provide would be greatly appreciated.
Thanks,
Shaun

Hello Shaun,
The function wb_rt_conversions.from_date is (at least in OWB10.2) overloaded and can with input-types as
date, timestamp_unconstrained, timestamp_tz_unconstrained, timestamp_ltz_unconstrained or varchar2.
If it doesn't work with varchar2 I would try Date:
For example: to_date('2010-01-01','YYYY-MM-DD')
I also found this thread:
http://kr.forums.oracle.com/forums/thread.jspa?threadID=608257
Hoping this helps...
Guenther

Variable in ''Name of Variable(Input Only Using F4).' for variant attribute

Hi All,
I Have a small problem with saving variant.
I am trying to save the Variant.In the varaint Attributes we have a field 'Name of Variable(Input Only Using F4).
I have created the PID 'XUS' in SU3.But i am not able to to view the variable in ''Name of Variable(Input Only Using F4).'.
Anybody please let me know how to make it.
Thanks,

Please follow the below steps to restrict the user to access 2 company codes,
1)Mark the IO(Company code) Authorization relavent and activate it.In the IO Business Explorer tab check the Authorization relavent check box.
2)Go to T-code RSECADMIN -Under Maintainance -Enter the name of Authorization Object an click on create Authorization.Insert the IO and also SAP recomended Objects 1.0TCAACTVT, 2.0TCAIPROV and 3.0TCAVALID.
Maintain the values for these objects.Select the company code and click on details.
3)T-code RSU01-Enter the name of the user to be assigned with the authorization object and click the change button.The select the relevant authorization object and save.
4)Create Authorisation Variable in Query Designer Create an Authorization Variable - Variable with Processing by Authorisation in Query Designer as Below for Sales Organisation
Note : Also include all Authorisation Relevant Objects which are used in that infoprovider in addition to the above additional 3 objects otherwise you may get "No Authorisation" error when you execute the query.
Note : 0BI_ALL is the authorization object to access all the info objects which are authorization relevant.
Reagrds,
Ramitha

Is there a linear equations VI thatI can use for inputting the coefficients with variables attached to them? Thank you.

Is there a linear equation VI that I can use for inputting the coefficients with variables attached to them? I am currently studying elec engineering and am in the thick of transient analysis. It is very time consuming figuring the mesh and nodal analysis in the transform domain. With 3 branches in a mesh analysis the resistors, inductors and capacitors are represented with variable s in them. I need to determine in the transform domain then convert to the time domain. One equation goes like this: (3+2s+1/4s)i1s - (2s)i2s - (1/4s)i3s = 6/s -6. The other equations are similar. I must keep the variable s in the equation and solve it with s in the result. I made several VIs for determining simultaneous linear equations some for complex numbers and they work great. This one has me a little stumped. I thinking that maybe Labview doesn't have a VI for this. The other VIs were fine because you just plugged in the numbers and ran the VI and got your result. Any VIs that do LaPlace transform operations?
Thank you.
Tom

Hello Tom,
You can find a VI for doing Laplace transforms in Functions->Analyze->Signal Processing->Frequency Domain (this VI is only available in the Full and Professional versions).
You may also find the following tutorial of help in working with linear systems in LabVIEW.
Linear Systems in LabVIEW
Keep up to date on the latest PXI news at twitter.com/pxi

Parameters used for file input

Hi,
PARAMETERS : P_FNAME LIKE RLGRAP-FILENAME OBLIGATORY
PARAMETERS : P_FNAME LIKE IBIPPARMS-PATH OBLIGATORY
PARAMETERS : P_HFILE LIKE FILENAME-FILEINTERN OBLIGATORY
PARAMETERS : P_NAME TYPE APQI-GROUPID.
The above are the various ways of decalring the parameters for file input... can u tell me what is the difference between them & the situations or condition when, which one has to be used ??
Regards,
- Hello SAP

Hi,
I am assuming you are using the parameters to upload/download a file.
Here is what they will do for you. Let us see the following file name parameter.
PARAMETERS : P_FNAME LIKE RLGRAP-FILENAME OBLIGATORY
Defining the parameter this way will help you in using the obsolete function modules of WS_DOWNLOAD, WS_UPLOAD as their interface requires the filename to be defined this way. But the new replacement for them GUI_DOWNLOAD and GUI_DOWNLOAD defined the filename as a string. Also F4 function modules used for browsing through desktop directories for a file like KD_GET_FILENAME_ON_F4 also use the parameter of this type.
So, if you are using a function module like the ones above, then you are better of with this parameter.
Let us see this definition.
PARAMETERS : P_FNAME LIKE IBIPPARMS-PATH OBLIGATORY
This is no different from the one above, so it makes no difference.
Next.
PARAMETERS : P_HFILE LIKE FILENAME-FILEINTERN OBLIGATORY
This is typically used for a logical file name, not a physical filename and path. What a logical filename does is that it allows you to define logically define filenames and use them in your programs at the same time giving you(or your network team) the flexibility to change the directory structure. When they change the directory structure, all you have to do is to change your logical path definition, rather than changing every single program that uses the path. FILE is the tcode for this area. Length of this is just 60 and so it may not be sufficient for the filename and path. But if you are using it as a logical file name, then it is useful when using function modules like FILE_GET_NAME which will read in a logical file name and give you the string containing the physical path and file name.
Now the last one.
PARAMETERS : P_NAME TYPE APQI-GROUPID.
This is not at relevant for files. This is used in batch input and this is the name of the batch input session. It is 12 characters long.
Hope this helps, if not please let us know.
Srinivas

Is it possible for a mac to recognise a camcorder as a video input without using imovie/final cut?

Is it possible for a mac to recognise a camcorder as a video input without using imovie/final cut, I use web based video capture software and need an HD input that the mac would recognise as if it were a webcam?
Any help would be greatly appreciated!
Thanks

HI,
I used to use an analogue Camcorder and a DV converter that had Firewire output at one stage when starting out in iChat.
See the Item 3 in the "Before your Start" item on this page
8:41 PM Saturday; November 12, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously
Message was edited by: Ralph Johns (UK)

Service desk for non-sap (please - any inputs are welcome)

hi all,,
I know how to setup service desk for SAP use. Can some one provide me some tips on using solution manager - service desk for non-sap as well? eg: the company wants to use service desk for normal activities as well, as laptop not working, server down, other system issues etc.
The questions I have are -
1) Any specific structure to be created for the non-sap? The way we use in SAP specific environment is to use "SAP Components" while creating tickets. How can we create tickets for non-sap components? What will be the "responsibility" selection?
2) How about the Ibase? For SAP, the ibase already have the data from SMSY. How can I get data for non-sap systems? Anything is SAP to keep the Asset management data (like entries of laptops, servers etc)
Thanks for all the suggestions !!
JZKALH

Hi
You need to go for service desk XT which is the extension of service desk to manage non sap or IT incidents
Check below link
https://websmp110.sap-ag.de/_solutionmanager
Heterogeous system environments are a challenge for IT-service management in any company. The associated complex structures and varying forms of media often make it difficult to realize efficient service processes. With SAP Solution Manager Service Desk - Extended Usage (Service Desk XT), SAP offers a centralized support tool as a single point of access - for service requests and problem tickets related to SAP and non-SAP software.
The Single Point of Access for Support
SAP Solution Manager, which is a standard part of every SAP solution and therefore can be used by all SAP customers, supports users in SAP relevant service requests. The standard function of the service desk is restricted to service requests.
With Service Desk XT, SAP provides an extended support tool, which can be also used for general service requests, for example regarding IT or telecommunication equipment.
This priced add-on does not require additional interfaces to third-party products - the same service requests are used for SAP and non-SAP applications. This simplification is a benefit for your employees.
This solution has been created with IT service providers in mind, especially those which work within a company and currently do not have an IT-service desk application in place or would like to replace an existing system.
Also,
check this link
pg(46)
https://websmp205.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000147532009E
Pg 52 onwards
https://websmp205.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000059742008E
https://websmp205.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000548652007E
Hope it helps
Regards
Prakhar

Reversal of common input & input services used for exempted

Similar Messages

Maybe you are looking for