Reversal of sub contract stock

Hi Gurus,
when we do vendor return for subcontract stock we encounter following error:
"Change the inspection stock of material CYPDA007 in QM only"
We receive stock using Migo for purchase order and we try to return using Migo 122 movement.
Can anyone of give me a suggestion?
Thanks in anticipation.
Shiv Shankar

Hi,
What about Mtype 102- Reversal of 101- if u want reverse the GR first u do with 102.
Regarding the message, give the message no. and check whether the material has Quality veiw or not.
Check settings once again.

Similar Messages

Sub contract stock.

Hello,
I want to extract material stock at Sub contract(special stock o) as on past date say 6 months back.
I tried to extract report from T code MB5B but could not get output report even after running for more than 1 hour. Morever,
this report gives only stock at vendor and will not give me vendor details.
Please help me.
Sundar

Check this answered link [Stock at subcontractor for Particular Date|Re: Stock at subcontractor for Particular Date]

Sub Contracting GR Accounting Entries

Hi All,
I am posting GR for sub contracting PO and found the following entries in the accounting document of GR:
1. Stock Acct. of Finished product
2. GR/ IR Clearing Acct
3. Sub Contracting Charges
4. Change in Sub Contracting Stock
However, I did not see the accounting entries for:
1. Stock Acct. of Spare parts
2. Consumption Acct
Please suggest how to corrent the same?
Rgds,
KK

Hi,
Check in GR Document whether line item for component consumption exists with MvT 543, if yes then check whether MAP of material is ZERO.
If line with MvT 543 doesn't exist then you might have forgot to activate "Item OK" indicator for component line item during GR in MIGO. Confirm this by checking componet stock in MMBE for special Stock "O" for Vendor. Just cancel the GR Document and Post GR again.
During GR against Subcontracting PO (In MIGO), following A/c Entry should get posted;
BSX     Assembly Stock A/c          Dr     5000.00
BSV     Change in Stock A/c          Cr     5000.00
FRL     Subcontracting Charges A/c     Dr     1000.00
WRX     GR/IR Clearing A/c          Cr     1000.00
GBB-VBO     Component Consumption A/c     Dr     4000.00
BSX     Component Stock A/c          Cr     4000.00

Job Work (Reverse Scenario of Sub Contracting)

Hi Everybody,
Here is one scenario, I am sure, it will be mapped in Standard SAP, the scenario is like i am a job worker, I take the raw materials from the customer and create production order and use those raw materials supplied by the customers and charge the labour in the sales order, some times i even use some components from my stock for that also i will charge to the customer in the sales order, this is just opposite to sub contracting where i m purcahsing the labour and sending the raw materials out, this is the reverse i m taking the raw material and selling my labour, so i m basically the sub contract vendor
I want to take these material in my stock without value, at the same time i cannot create this materials as non valuated type as these material are used as valuated in other plants
If any one have any suggestion how to do in standard sap please let me know
i have one idea of vendor consignment, (Stock type K) but i m not sure how to map from sales order to production order, than take the raw materials from customer and use in the production.
If have any doubts about the scenario let me know
Thanks in advance
Edited by: Husain Husain on Feb 24, 2009 7:31 PM

Hi Everybody,
Here i have one scenario, I am sure it will be mapped in Standard SAP, the scenario is like my company does job work( Reverse subcon) for others, we take the raw materials from the customer and create production and use those raw materials supplied by the customers and charge for the processing in the sales order, some times we even add some components(Products) from my stock for that also i will charge to the customer in the sales order.
We are only billing for additional components and processing & Packing charges.
Please tell me, how can i map the scenario whether i have to create to separate sales document for selling product and processing charges. Selling product case even store issue components to products therefore no delivery.
If any one have any suggestion on how to do in standard sap please let me know.
If any doubts about the scenario please let me know.
Thanks in advance
Prashant

Project stock - sub-contracting - Challan matl is different from matl doc

Hi,
We have sub-contracted with project stock ( Special stock Q ) materials to SC vendor.
While doing challan reconciliation with J1IFQ , we are getting the error
" Challan material is different from material document"
We are on ECC 6 support pack level 16.
Please advise solution.
Rgds,
Manohar

Number ranges maintained for 57FC
Ser Grp    No                  Year               From                     To            Current number
01              01     2009     0000000001     0000099999               226
11             01                          2009     0000000001     0000199999                  18
Is there a problem in this number range. For normal sub-contracting , we did not face any problem so far.
Please advise.
Rgds,
Manohar

How to reverse the Reconcile Sub Contract Challan.

Dear Expert,
How to reverse the Reconcile sub Contract Chaaln. Our user has been made wrong GR and reconcile the Challan Number aganist same GR Number.After check the Report J1IFR then shown wrong entry.
Please revert to me as soon as possible.

Tried this step.
The mat doc no has been removed from the list (as seen in J1IFR) But the qty is still the same. Even qty has to be reducedto reconcile the correct mat doc
pl help

Sub-Contract Order Stock Issues

Dear All,
In Sub-Contract Order, i will create an Order for Finished product for X quantity & i maintain BOM(Semi-Finished Components) of Y quantity for the Finished Product. After approving the same the order was send to Sub-Contractor.
And Store In-charge issues these stocks to Vendor by 541 Mov-Typ in MB1B T-code.
In the same ways these Order's are placed to multiple Sub-Contractors.
Then how could i now, these stocks are issued to Vendor against these Sub-Contract Order's by Standard Reports.
Regards
JC

Thanks for your reply.
In MBLB report, i can see the stocks against Vendor Code. But if i place the same Materials for a single Vendor on Multiple Sub-Contract Order's. Then how come i verify the Stock report against Order's.
Regards
JC

Goods receipt through Inbound delivery for Sub-Contracting Purchase order

Hi
I am trying to do goods receipt for the inbound delivery /shipping notification created for a sub -contracting Purchase order. The Finished product and the component part are batch managed, When I try to perform PGR in VL32N , I am getting a blank screen as error message and Goods receipt is not getting triggered . I checked for OSS note and found 645119 close to my issue but not an exact match . We are in ECC 6.0 with EHP 4. Can some one clarify whether it is possible to post GR through inbound delivery for a Subcon Purchase order .
Thanks in advance for your immediate response.
with regards,
Joseph Anand B

Hi, The issue may be due to this - the component is batch managed but the batch data is blank in the component list of the Purchase Order Item. Or a batch is maintained in the PO item component list but the stock for the same batch is not available with Vendor, i.e. stock with some other batch may be available.
In a receipt for Sub-cont PO, 101 happens for FG and 543 happens for component. But there is no option to provide the component details in a delivery. So in standard system, when 101 happens via a delivery, 543 will be posted in the background. So any error in posting 543 will result in a blank screen without any error message.
You can fix this by maintaining correct batch in the PO component list.
But there is another issue - you cannot do 'cancel posting' and 'return delivery' for this receipt. Only you can reverse the inbound delivery and you should know that the recevied stock shouldn't have been processed to do reversal of inbound delivery.

541 & 543 Mvt for Sub Contract Process with Split Valuation

Hi all,
We have activated SPLIT VALUATION for sub contracting in ECC 6.0
We have clasified into 3 Valuation Catergories as New,Repaired & Faulty.
The logic & naming convention of the materials are
New Material : C1
Repaired : C2
Faulty : C3
The details are as.....a faulty material can be converted into Repaired by the external Vendors,for which we raise a PO and do MB1B with 541 mvt type with ref to this PO.
The Acing Entries are
PK      GL Code        Material     Value
99         117000         C3            10
89         117000         C2            100
93         600530                           90
While in process the GR w.r.t the above mentioned PO ,we are getting 6 accounting entries (which is delivered by Stand SAP) they are as
PK      GL Code       Descrip     Value
89         117000        Stock        100
96         117400        GR/IR         150
91         600530        Sub Cont    100
86         600863        Sub Service 150
99         117000        Stock          100
81         600530        Sub Cont     100
Can any please explain me how the system calculates the above Accounting Entry.
We are confused why the system calculates ( entries) for the 91,81,86 Posting Key.
I have uderstood that PK 89 for goods inward, 96 is for GR/IR clr, 99 is for reversal of 541 mvt type.
Other 3 entries i have the confusion ........
Can anyone please guide me and explain in detail how ,why andfrom where the system is calculating the entries.
Hope that you will help me in this regards
Take Care
God Bless
Regards
Praveen.
Edited by: Praveen Singh on Sep 16, 2008 8:07 PM

Go to OMWB and click on simulation and here enter you mateirla number, plant and Mtype 101
Then click on account assignment
you will see all the entries
Posting Lines Text              VlGCd AGC VCl   PK Acct D      PK Acct Cr
Gain/loss from revaluation      -e-   -e- -e-   83 440700      93 440700
Inventory posting               -e-   -e- TRA1 89 130000      99 130000
Incidental costs of external a -e-   -e- -e-   86 460820      96 460820
External activity               -e-   -e- TRA1 86 460960      96 460960
Change in stock account         -e-   -e- TRA1 81 460820      91 460820
Purchase offsetting account     -e-   -e- -e-   40 --Missing- 50 --Missing-
Purchase account                -e-   -e- -e-   40 --Missing- 50 --Missing-
Materials management exch.rate -e-   -e- -e-   40 440600      50 440600
Cost (price) differences        -e-        TRA1 83 440000      93 440005
GR/IR clearing account          -e-   -e- TRA1 86 210005      96 210005
Inventory posting               -e-   -e- TRA1 89 130000

Sub contract

my client running fg sub contracting (electro plating )cycle through the MRP
after return from vendor with mvt type 105 (543) i check document list with MB51. i found following g/l account effects :
SFG consumption for sub contract account = 602026
Gr/IR Clearing Account = 164335
SFG-inventory account = 323055
for sub contract account = 602130
Inventory account = 320010
Costs of goods mfg = 602200
but if do whole sub contracting cycle without MRP i can see effect in following G/L a/C:
Manual Cycle .
Inventory account = 320010
Gr/IR Clearing Account = 164335
Price Differance Account = 602155
change in stock = 603010
Sub Contract expense = 603000
SFG-inventory account = 323055
SFG consumption for sub contract account = 602026
my question is why this differance comes ?
if i want gl accounts hit by manual process in MRP process what changes to be made ?

Hi,
Price diffrences arise during valuation @ GR if the material is managed at standard price in MMR.
Also there is one more setting in customizing that for a plant that price differences should or not be posted during GR.
spro-IMGMMInv MGmtGR--price differences for subcontracting at GR
Regards,
Deepak.

Sub Contracting Process

my client running fg sub contracting (electro plating )cycle through the MRP
after return from vendor with mvt type 105 (543) i check document list with MB51. i found following g/l account effects :
SFG consumption for sub contract account = 602026
Gr/IR Clearing Account = 164335
SFG-inventory account = 323055
for sub contract account = 602130
Inventory account = 320010
Costs of goods mfg = 602200
but if do whole sub contracting cycle without MRP i can see effect in following G/L a/C:
Manual Cycle .
Inventory account = 320010
Gr/IR Clearing Account = 164335
Price Differance Account = 602155
change in stock = 603010
Sub Contract expense = 603000
SFG-inventory account = 323055
SFG consumption for sub contract account = 602026
my question is why this differance comes ?
if i want gl accounts hit by manual process in MRP process what changes to be made ?

Hi
Kindly check with the following:
In customizing for that plant price differences should or not be posted during GR.
SPRO->IMG>MM>Inv MGmt>GR-->price differences for subcontracting at GR
Thanks

Sub contracting Process issue for A/c entry

Hi All,
While doing the GRN for subcontracting process ,cost object error is appearing for stock change SFG account ( BSV).
Business would like to do not assign the Default cost object for change in stock account. Kinldy confirm whether it is possible to determine Internal order number ,whcih same assigned to GRN for stock in change account SFG.
Any alternative method would be apprecaite
Rgds
SumaMani

Thanks to all of us for answers !!
We solved problem as mentioned !
1. Created separate SFG Stock change over subcontracting GL account and assigned same in OBYC - BSV & profit centre wise internal order defaulted in OKB9 settings.Also created sub contracting expenses GL and assigned OKB9 profit centre wise. ( Problem has been solved with separate GL account of stock change over)
It can be possible to solve with using of substituion GGB0 with module pool RGGB0*
Rgds
SumaMani

Sub-Contracting

Dear All,
While making GRN for sub-contracting by using 543 movement type, the following account determinations are made as per the messages received in process.
GBB--VBO FOR VALUATION CLASS 7900
WRX--GR/IR
BSV--CHANGE IN STOCK
FRL--FOR EXTERNAL ACTIVITY
But I am getting error message as
Fld selectn for mvmt type 543 / acct 24110499 differs for Cost center (010)
The above acc no was assigned to GBB--VBO.
Please provide a solution.
Regards,
Venkat.

Hi
The problem may be because the field selection of GL account 24110499 from FI is different from that for the movement type 543 from MM. The Report RM07CUFA can be used to check this discrepancy. Therefore, go to Transaction SE38 and select this program. The next screen will appear where you have to enter both your G/L Account and Movement Type and stock indicator O.
For further information, check in OSS Note 9281.
regards
Srinivas

Sub-contracting P.O

Hi All,
We have created sub-contracting P.O and while doing ME2O- create delivery. We are getting below error msg.
    Depending on the category of the delivery being created, the system needs the following transfer data:
    o   Outbound delivery
        -   Shipping point, Sales organization,Distribution channel
             Division,Material number,Delivery quantity,Ship-to party
              Base unit of measure
Inbound delivery
Base unit of measure,Conversion factors for converting base and sales units (not for creating/replicating an inbound delivery in a decentralized Warehouse Management system)
Goods receiving point (shipping point) when a delivery is
    created in decentralized WM
Outbound and inbound deliveries from goods movements
Shipping point
      -   Sales organization,Distribution channel,Division,Material number,Delivery quantity,Ship-to party,Base unit of measure
Plant and sales unit transfer data is always mandatory.
Please Anybody can tell me what configuration we have to do.
Thanks and Regards
Chandru

You have to set up the shipping details just as you would do for a stock transport order with transfer posting happening through SD route. You have to set the delivery type for this document and the material should have sales/shipping data. Only then will the system be able to pick up the delivery type & thus create a delivery.
This is given in detail in help.sap.com -
From SC Stock Monitoring for Vendor as a Delivery via Shipping
From the SC Stock Monitoring for Vendor list, you can also create a delivery via Shipping. The advantage of this procedure is that you have shipping documents and delivery notes for the shipment of the materials to be provided to the subcontractor (refer to Goods Movements via Shipping)
To create a delivery, the following data has to be maintained in the system:
the plant must be assigned a sales organization, a distribution channel, and a division. You can define this in Customizing for Purchasing, in the step Set Up Stock Transport Order.
A delivery type has to be defined for the plant from which the items are to be delivered. You can define this in Customizing for Purchasing, in the step Set Up Subcontract Order.
If you want to reference a reservation when you create a delivery, you also have to set the Predecessor necessary indicator to L (Provision to subcontractor necessary) when defining the delivery type. This means that the requirements generated by the reservations can be correctly offset against the deliveries created. You can define this in Customizing for Shipping, in the step Define Delivery Types.
The vendor for the stock with subcontractor must be entered as the customer in the organizational units in the delivering plant, such as sales organization, distribution channel, and division.
The material to be provided has to be entered for the organizational units in the delivering plant, such as sales organization, distribution channel, and division.
The combination of shipping condition (from the subcontractoru2019s customer master record), loading group (from the material master record for the components to be provided), and the plant have to be assigned to a shipping point. You can define this in Customizing for Shipping, in the step Assign Shipping Points.
To create a delivery, choose Edit ® Create delivery. A dialog box appears, in which you can enter the data required to post the delivery. The system posts the delivery in the background and, after posting, it informs you in a dialog box how many items were posted.

Project Sub contracting - 311 Q - Message no. M7 019

Dear All,
We are using project sub contracting with movement type 311 Q.
While posting stock to vendor storage location through t code MB1B, I am not able to post the stock with reference to Purchase Order.
System is giving below error:
Combination of movement type 311 Q and function selected not possible
Message no. M7019
We have maintained the movement type "311 Q", in confirguration for "Maintain Movement Type Groups" under "Subcontracting"
and assigned the movement type group to excise grouop under "Subcontracting Attributes".
I have searched through sdn but couldn't find any answer.
Would request you to please help.
Thanks & Regards,
MP

Hello,
Thanks for your inputs.
But in this case, how will I track with reference to Purchase Order, how much material i have sent. I can enter Purchase order number also in the screen layout for movement type 311.
But still i am lossing the line item relevant details while sending material to vendor.
Please help.
Thanks & Regards,
Mihir Popat

Reversal of sub contract stock

Similar Messages

Maybe you are looking for