Reversal Reason Code not displayed in document -FB08

Hello,
I have reversed the FI document using the transaction code FB08. While reversing I have given the SAP standard reversal reason code as 1. A new document was created on reversal of document.
But Reversal reason code '1' is not getting displayed in FB03 or GL line item report FAGLL03. I have checked the Field staus of the Posting key as well as of the GL accounts, at both the places "Reason code" is optional entry field.
Can you please suggest where/How to see the reversal reason in the document reversed through FB08.

Hi Prasanna,
First of all go to Table BKPF & check for the field STGRD value for the concerned document.If it has value then you will get the value for Reversal Reason in FB03.
I think you have mistook selecting the Reversal Reason in the layout because there are 2 different Reversal Reason fields with the same name. So select the correct field (BKPF-STGRD) from the layout.
Hope it solves.
Regards
Andrew

Similar Messages

Reason Codes not displaying when performing emergency access management(SPM

Hello guru,
I am experiencing a little problem when using superuser privilege management (emergency access) functionality in AC 10.0.
My problem is that the reason codes created in the AC system via the reason code link in the workcenter does not appear as drop down for me when I click on the logon button in the initial screen displayed in transaction SPM_GRAC.
Suffice to say that i do not have any reason code to pick from in the drop down for superuser privilege management in the AC system when i logon with the firefighter user to perform SPM.
Please help me out with your suggestions.
Thanks

Hello guru,
I am experiencing a little problem when using superuser privilege management (emergency access) functionality in AC 10.0.
My problem is that the reason codes created in the AC system via the reason code link in the workcenter does not appear as drop down for me when I click on the logon button in the initial screen displayed in transaction GRAC_SPM.
Suffice to say that i do not have any reason code to pick from in the drop down for superuser privilege management in the AC system when i logon with the firefighter user to perform SPM.
Please help me out with your suggestions.
Thanks

Documents not coming in the report taken for reversal reason code

Hi,
We have defined the various reason codes for document reversal.
When we try to take the report based on the reason code in FB03 or FAGLL03, the reversal doucment is not coming up.
Is there any setting for it? or how to get that report? We need that report to authorize the reversals.
Thanks,
Pratap

Hi,
Please note that In standard SAP, the reversal reason code gets stored in the original document which is reversed. It does not get stored in the reversal document.
You can get the report based on the field STBLG (Reverse Document Number) and STJAH (Reverse document fiscal year).
This will be filled up for both original document and reversal document. And the clearing document number will be same for both the documents, so you can easily link the two documents in FAGLL03 output layout using sorting based on clearing document and filtering based on the two fields given.
Regards,
Gaurav

FBL1N not showing reversal reason codes

Hi,
We have made some reversals for AP invoices. In BKPF table, I can see the reversal reason code in field STGRD. I can also see the reversal reason code in FB03 document header.
However, in FBL1N, I do not see anything under reason code column. Is this the correct field?
Are there any reports which show the list of reversed documents and the reversal reason codes?
Thanks.

Hi,
Reason code, may be you are checking in FBL3N is(BSEG-RSTGR)
Reason Code for Payments
Key which represents a reason for payment differences. The keys can be
freely defined in the system.
Reversal reason code field is not available in the hidden fields list.
In case if you want to add this field, please go to settings--special fields
There you can add table and field name, this can be done in customizing client and can be transported to PRD client.
Rgds
Murali. N

Help! Bridge does not display Indesign Documents as spread thumbnails anymore.

Adobe please fix this issue. Adobe Bridge CC and (also CS6) does not display Indesign documents as spreads like it always used to. It displays a preview of the left hand page only not both left and right. This is very frustrating as this was a very useful feature from day one. Why is it not there and what can you do to get it reinstated asap.

Moving this discussion to the Bridge General Discussion forum.

Idoc error 51 reason code not found

i am having idoc with error 51 message as reason code * not found ,
please suggest what to do.
Moderator message: please do some research before asking others.
Edited by: Thomas Zloch on Nov 13, 2011 1:29 PM

Hi,
While processing the IDOC you are fetching or using Reason code which is either not maintained or found.
That's why IDOC is going into status 51 with this error message.
Check whether you are using Reason code somewhere in your FM which you configure in your Process code to process inbound IDOC.
Thanks,
Vijay

Tax codes not displaying in print preview.

hello,
i need to display tax codes in the me23n print preview.for that i write a subroutine pool program and fetch the values. but the values are not displayed. i debuged the subroutine pool program, i found that in output structure itcsy, there are no fields. i hope this is the reason for the values not displayed. please help some one how to display values.
coding : in script,
define &g_menge&
define &g_taxcode&
perform get_main_details in program z_mm_po_details
using &ekpo-ebeln&
using &ekpo-ebelp&
changing &g_menge&
changing &g_taxcode&
endperform
in subroutine pool program,
FORM get_main_details TABLES input STRUCTURE itcsy
output STRUCTURE itcsy.

Hello Kiran,
<li> We can display LOGO using REUSE_ALV_GRID_DISPLAY only not using REUSE_ALV_LIST_DISPLAY. So when you click on print preview Grid output is displayed as REUSE_ALV_LIST_DISPLAY output. It is confirmed that using ABAP classical or ALV printing LOGO is not possible.
<li>To print LOGO, you can go for SCRIPTS or SMARTFORMS.
Thanks
Venkat.O

Office Control does not display word document

HI all,
I followed the example code to display a word document in the office Control UI, but the display remains blank when I push the button to 'show document'.
I do not have MS Office installed on the server so I have a wordpad named example.doc on the C drive. Can I read the data from wordpad and display it on the Office Control?
Thanks
Jay.

> Thanks all,
> I have Office 2003 installed on the client but not on
> the server. The bytes[] array gets loaded with the
> string '[B@10e770f', but the display stays empty.
>
> Jay
Hi Jay,
I need to use this feature as well. Did you get it to work. Can you display and edit a Microsoft Word document from within a browser page. It would be good to know that you have been successful.
Jesse

Tax code not displaying in me2j - Need Report for PO tax codes

Dear Guru's,
For Trading materials, while creating PO, we are inserting Tax codes in "Invoicing Tab". But the same(TAX CODE) is not displaying in ME2J report.
But For service materials, we are entering tax codes in the "Services Tab" and it is displaying in the report ME2J.
Kindly tell me a report where we can see the taxcodes for PO.
Regards,
deepa

Sir,
I did that already, but no code is displaying in that "Tax code Column" for Trading materials.
But tax code has been entered while creating PO in "Invoicing Tab" as "V0" for example.. V0 is not displaying in ME2J Report.
Pls. reply
Edited by: deepa rani on Jun 4, 2008 2:54 PM

Code not displaying in code view

When searching for a particular feature, I may have clicked on something by accident. Now, my site looks and works fine in the browser and in design and live view, but the code is not displaying in code view. See attached image.
Anyone know how to fix this??? Thank you in advance!

Have you tried restarting everything?

Return Reason codes/ Reversal Reason Code

Good Morning SAP Gurus',
I want to configure reason codes when handling return checks (NSF's). I don't know which node I should or shouldn't use in this case. I have something called Return Reason Codes and Define Reasons for Reversals.
I believe the typical method in handling NSF or return checks is FBRA and assign a reason code but I would also like to somehow systemically add a return fee to the customer account.
I don't recall where or how that was done.
Any insight?
POINTS AWARDED.
Thanks!

Where will you want to put the return reason code ? is it a global code for a return document or detail code ? I mean store in the row detail.
I suggest to create it in the row line. you can use available one or create a UDF. If you want to use it a mandatory, just develop store procedure or set it as mandatory.
Rgds,

Latest code not displayed

We are working in a team and therefore using NWDI for development. One of the applications developed by a team member when checked out by any other team member does not give the latest code. Instead it is showing the old code with lots of errors (as code is incomplete), nor it is allowing to make any changes to the code. However on the original developer's machine where the code is developed it shows the latest code.I have tried "remove from client " option, Manually deleted the local poject folder and created again from Inactive DC,s but still it shows the old code.
When i check from version graph i can see the latest code, so i assume DTR is having the latest version but not displaying when the project is created. Kindly help.

Hi,
Go to the project explorer view
select the project
rightclick DTR-> Sync-> Force Sync.
When you do a force sync it will sync to all activities which are not even activated.
Regards
Ayyapparaj

VF05N not displaying all documents correctly

Dear all,
I am facing the Problem while executing the VF05n.
When I specify a time period as selection criteria, I am getting few documents.
But with the same criteria as earlier & the Date field as empty, I am getting many more documents for the same date that I had specified in the earlier execution of VF05N. These additional documents also fulfill the Date criteria which I had given in the earlier execution, but they dont appear if I give date as a selection criteria.
I would like to know how to get or why I am not getting all the documents with the billing date , when I specify date as criteria. & I am keeping all other Selection Criteria same in both the sessions.
Please check this scenario & reply with suggestions
Regards,
Diwakar.M

Hi all,
I want to explain my scenario clearly.
In the vf05n tcode,
1st case:
if I specify the billing date (for eg 06.12.2011) and execute I am getting the output lists of 2 billing documents for the specified sales organization in this case CN01 and distribution channel 01.
2nd case:
And if i do not specify the date (in this case i am keeping the date as blank) in the same transaction and execute, I am getting the output lists of 28 billing documents for the date 06.12.2011.
I found the reason by debugging, the reason is that
For 1st case, the program fetches the records from the table VRKPA for the date 06.12.2011( in this case 2 records for the date 06.12.2011) and with the reference to billing document numbers fetched from the table VRKPA, the program fetches the document records from the table VBRK and display as a output.
For 2nd case, program fetches all the records from the table VRKPA for the sales organization CN01, and for the respective billing document numbers fetched from the table VRKPA it(program) displays the records from the table VBRK as a output lists. so if i see the 28 records for date 06.12.2011in the output lists.
The difference is due to that, for the same billing document numbers the billing dates are varying in the tables VRKPA & VBRK.
One thing I want to know is, why the dates are varying for the same billing document numbers in the tables VRKPA & VBRK?
Please reply with your suggestions.........
Thanks & Regards,
Diwakar.M

Code not displaying in Design View

Why would code visible in code view not be visible in design view? DW cs4, using lesson pages from Adobe DW cs4 CIB.[I'm stuck and can't complete my lesson!]

Display problems are most often caused by malformed code or an imbalance in opening and closing <div> tags. Try validating your code and fix reported errors.
           Code Validation Tools
          CSS - http://jigsaw.w3.org/css-validator/
          HTML - http://validator.w3.org/
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Not display billing document in R3, only display Sales Document

Hello,
We need to make a change on CRM. On CRM environment we have the document flow in the sales document. If we replicate the document to R3, in R3 we can see the sales document replicated and the document flow, for example, the billing document. We need to stop to some users to display the billing document in R3(only display the sales document replicated from CRM).
Is there anyway to apply this possibility on CRM, because the replication to R3 is only with one user RFCUSER, could be possible to create another user like RFCUSER2 for example, with less authorizations in R3.
We have been answered on this forum to to this:
This you can achieve by creating one more RFC destination.
Logon & Secruity Details for this RFC Destination should be
Trusted System : Yes
Logon : Select the Current User
After saving this check for the Remote Logon, it should navigate to your ECC system with your current user.
Next go to BD97
Assign this new RFC destination as "Standard BAPI Destination".
After this, when ever you navigate to ECC from CRM document flow, it will logon to ECC system with Current User.
But where we can custimize all this requirements??
Any other help?
Hope you can help us,
Thanks in advance

Hi Felix,
    You will perform this customization setting using two transaction codes BD97.
    Create RFC destination using SM59 transaction in CRM system.
    Assign this new RFC destination as "Standard BAPI Destination" in BD97 transaction. code Here assign this standard BADI destination to the ECCLogSystem. In BD97 you should see the logical destinations assigned to your CRM system. If you wont see ECC Logical System in CRM, then maintain ECC logical system using ALE Configuration. This entry should exist in the table TBDLS of CRM System.
     I hope this answers your question.
//Bhanu

Reversal Reason Code not displayed in document -FB08

Similar Messages

Maybe you are looking for