Reverse Cleared Document

Dear Gurus,
I have the following issue:
Using FBR2, a new Vendor Invoice posting was created
Using F110, payment run was scheduled and posting was done for the vendor invoice
It was found that the Discount Base was wrong and the system had taken the value based on the refrence document.
Using OB32, I have made the field modifiable and have made sure that i have not choosen any stipulations.
Now when i tried to change, it is not possible as the area is greyed. I found out if there is a payment posting done it is not possible to make the change. Only option is to reverse the payment posting.
How to reverse a payment posting?/// How can i change the discount base? Please help me on this....
Thanks.
regards,
Raj

Hi Raj,
Reverse a payment posting/Issue check cancellation
1. Reset cleared items(to make it open item)
2. Reverse transaction
3.Cancel cheque(FCH8)
Path:Accounting->Financial accounting->AP->Environment->Check information->Void->Cancel payment
Regards
Amulya

Similar Messages

How to reverse clearing document

Dear gurus,
I would like to reverse clearing document(document no. 1) by FBRA but i can not, it have message "Document xxxx is not purely a clearing document". because this clear document(document no. 1) was cleared by anohter document(document no. 2). That's means i must be rererse document no 2 too.
My broblem is i can not clear document no. 2 because it was cleared by another document and.....continuously...
Do you let me know for how to reset document only not need to reverse?
Thanks you.

Hi
I am curious as to how this scenario can be there...Anyways, how many such documents are there. If you need to reverese document 1 and you say there are upto 7 documents, you need to start with Document 7. The only way you can find out is by tracking the document down to the last pure clearing document. Then start resetting and reversing,.....Say doc7, then doc6 then doc5 so on.
I would really like to know the live scenario where you are havind a scenario like this where so many interlinked documents are there.
Hope this helps.
Karthik

Table for reversal clearing document

Dear Expert,
Can any one give me the table name for reversal of clearing document.
Regads
SKK

Hi,
All financial documents are stored in BKPF (header) and BSEG (lines) tables. Keep in mind, that some clearing documents have no lines, thus no entry in BSEG. Whether the document was reversed you can see in BKPF-STBLG field.
Regards,
Eli

Reset Cleared Documents and Vendor Open Items Report FBL1N

Hi all,
I have following scenario:
- In last month, we had 2 documents (invoice and payment) cleared against each other. We created open items report as well as open items correspondence sent to Vendor. Obviously, the docs were not included in report.
- In this month, we have reset and reverse clearing document of the documents. We create report again with the open key date as in last month. It should not include the 2 docs but it did with whichever key date we chose.
Is there any setting that open item report doesn't include cleared item at the key date when we run report for previous month?
Thanks and Regards,
Dau

Hi Dau,
If i understand you correctly then you posted and paid invoice in Jan 2012 and generated the open line item report for Jan which correctly did not include this cleared invoice.
Now in Feb 2012 you reset and reversed this payment document.
The issue is when you execute the report FBL1N again then you get the open line item for this invoice correct. Please confirm what is the open item key date that you are using here for generating this report
If you keep it 31.01.2012 then definetly this invoice should not appear in the report but if you keep that 29.12.2012 then this line item would for sure appear.
The importance of key date is to limit the report to certain date. The system selects all items posted up to and including the specified key date and open for this period.
so I think your issue is with the key date.
Hope this helps you.
Regards,
Prasad

Mass processing of FBRA (Reverse clearing docs). Is this possible?.

At present it does not seem to be possible to mass process the reverse clearing documents, although it feels like it should be possible. Has anyone come across or know of an enhancement that may allow this to happen?
Jas

Thanks for that.
Of course you did not mean CATT as that's a testing tool and not a loading tool. CATT has restrictions on the number of records that can be loaded, from what I recall.
However, there are a number consultants here that believe that there is something available and your answer has just sent them all scurrying to OSS to check.
Regards
Jas

Resetting and reversing a cleared document

Hello
I want to reset and reverse a customer clearing document. The clearing document which is 54203512 was posted and matched against the customer invoice in the previous period. When reversing and resetting the document in transaction code FBRA, a pop up screen u201CReversal Datau201D appears. The reversal reason is specified as 01 (Reversal for incorrect posting), posting date is todayu2019s date however the original clearing document 54203512 was posted in 05.09.2008 and in previous period. Click on continue.
The document is not reset and reversed and I am getting the error message u201CReversal reason 01 only permits posting date 05.09.2008u201D. Not sure why the document is looking at the posting date of original document even though I specified the reversal date as 08.10.2008. Can a document be reset and reversed in different periods?? Or does this cause any issues or problems? Or is this a bug??
Thanks in advance
Evelyn

Hi,
There are only 2 controls allowed for Reversal reasons:
1. Negative posting
2. Alternative date for posting
The symptom you have mentioned would be of a control from somewhere else, i.e. either a user exit or a validation. An order reason can only restrict it to current date or allow any other date. At least that is what I have experienced.
Cheers...

Automatic payment program; reversal of a reversal of the clearing document.

Hi All,
I created a vendor open item and cleared it using APP. lets say clearing document no. is 1. I reversed it using FBRA and the document no. is 2.
now I tried to reverse the document no. 2.
in one scenario, where there is a FX difference when posting document 1, reversal of document 2 not happened.
in other scenario, where there is no FX difference, I was able to post the reversal of 2.
is this standard behavior? in the first scenario I wasn't able to post the reversal for Doc.2 is it because of FX gain/loss only? can't we post reversal of Doc. 2 if there is a realized FX difference gain/loss?
Regards,
Sreeni.

Hello Sreeni,
The standard SAP behaviour should allow FBRA on Doc.2 even when FX gain/loss has been posted as I had done it already.
Things to take note are, the respective reversal document type had been defined and number range has been set up properly.
Kind regards,
John chin

URGENT...reversal of documents, that are shown as cleared items in the syst

Hi Friends,
Our client has issued about 3 cheques about 6-7 months back as settlement to an employee. (So in which case as per the system, it is showing as a cleared item).
He has not presented the cheque or for some reason, the amount is not withdrawn from the bank. As the cheque is more than 6 months old, they want to reverse the posting made.
I tried reversing the document using, FB08 and FBRA, however, system pops up an error message saying, cleared items cannot be reversed, the items need to be in red, as open items for reversing,
Is there any way that I could deal with this.
regards
sandhya

Hi,
Thnx for the reply. I had posted a wrong issue. the cheque issed was more than 6 months old. But the actual check issue date is 02.02.2007 i.e., of the financial year 2006 and as the books of accounts are closed, that is where I'm facing a problem.
Now how to go about resetting that cheque from the previous financial year, coz FB08 and FBRA are not working.
Any solution in such a situation
regards
sandhya

Clearing open items on reversal of documents

Dear All,
As we all know that raising Invoices through F-43 & F-22 in FI creates open items for vendors & customers respectively. Reversing these documents/invoices in FB08 will clear these open items. However, reversing invoices raised from SD/MM does not clear the open items. These invoices are getting reversed from respective modules. ie. entries are getting reversed, but items are not getting cleared. Consequently, these items also appear with positive & negative signs in Incoming & outgoing payments (F-53 & F-28) in "process open items".
Pl. let me know how the open items can be cleared on reversal of said invoices as it is done in FI (as mentioned above).
Thanks & regards,
Raja

Hi
In GL, AR, AP individual expenses documents we can clear by using reversal documents. But, Integration b/w FI, SD,MM documents it will generate automatically and it will clear based on the payment terms.
Shammi
assign points if it is helpful

Reversal of cleared document

Hi All,
Two KR documents "A" and "B" are cleared by the clearing document "C"
Now, user realized there is wrong posting for document "A". So they want to reverse the document "A"
They reset the cleared documnet, and reversed the document "A". But the document "B" and cleared dcument "C" are also appering as open items in the correspoding GL account report (FBL3N)
How can we resolve this issue?
Thanks,
Vidya

Hello Vidya,
Kindly check this links.
It may help you.
Reversal of Clearing document-AR
Reversal of Clearing document (Mass)
clearing document mass reversal
Thanks

Wrongly cleared document has been reversed &resetted

Hi Gurus,
could anybody help us to resolve below issue.
wrongly cleared document has been reversed and restted via FBRA ,so we are trying to reverse this doc via FBRA so we are getting below error message while doing
Resetting this reverse document is not possible
Message no. F5579
Diagnosis
The system required a reverse document to be created after resetting a clearing procedure as otherwise documents would have been generated in the system which could not have been processed correctly. The following cases require the clearing document to be reversed:
Exchange rate differences were posted.
Your intime solution is highly appreciated
Thanks & Regards
Vyshnava

Hi Syed,
Thanks for your reply ,
original postings happened as below :---
001 40       187720     CTB1 CTB01                                        16.08
002 50       187722     CTB1 CTB01 -I/F Chq                               15.58-
003 50       800802     Realized FX gain                                   0.50-
the above doc is reversed Via FB08 as below :-------
001 50       187720     CTB1 CTB01                                        16.08-
002 40       187722     CTB1 CTB01 -I/F Chq                               15.58
003 40       800802     Realized FX gain                                   0.50
Could you pls reply ASAP

What does it mean,resetting of clearing document and reversing of clearing?

Hi SAPians,
Suppose my clearing doc.no is say 100000.if i reverse it thru fb08,system will generate new doc no.m i rite?and the accounting impact will be like debit items will become credit and viceversa.but my doubt is if i only reset the clearing doc.no by FBRA then what will happen and what will be the accounting impact ? and what will happen if i reset with reverse the clearing doc. and what will be the accounting impact?
Regards,
Sumeya offrin

Dear Sumeya,
You have written "my clearing doc.no is say 100000.if i reverse it thru fb08,system will generate new doc no.m i rite?"
You cannot reverse a cleared document in fb08.
Now let me answer you other questions.
Say for example you have posted a document no. 100005. Then using FB08, you Reverse it and a new CLEARING document no. is generated, say doc. no. 100006. So out here whatever entry posted in doc. no. 100005 gets reversed in document no. 100006. (ie. debit becomes credit & vice versa). This document no. 100006 is your clearing document. Now, both documents, ie. 100005 & 100006 contains no open items. Both documents are cleared against each other.
Now when you only reset the cleared document no. 100006, it becomes an open line item document. There are no financial impacts. But, when you reset and reverse the cleared document no. 100006, a new document number is generated, say for example, document no. 100007 which is a reverse entry of document number 100006. Most importantly, document nos 100006 and 100007 gets cleared against each other. Both, document number 100006 & 100007 are cleared documents. There is a financial impact out here and the original document no. 100005 becomes an open line item document.
It will be a little confusing if you read it once, but put this example on a paper & then analyse, am sure your doubts will be cleared.
Hope this helps.
Regards,
Amit Maniar.

System Lock Error while reset & reversing the cleared document - FBRA

Hi Experts,
Currently using t-code FBRA, when user trying to reset & reverse the cleared document , they are facing "System Lock Error". We have analyzed on this issue and found SAP note no. u201C487347 u2013FBRA: Overflow of the lock table in production systemu201D . After implementation of this note, SAP has created one new transaction code, FBRA_LOAC.
However, when we tried to reset & reverse the cleared document using t-code FBRA_LOAC, we face the same error.
Can you help me to resolve this issue ?
Thanks in advance.
Regards,
Manish

Hi:
We once faced these issue and got it resolved by extending parameter after extending the profile-parameter "enque/table_size", as per note note 13907. Do not forget the restart the server after extension.
Regards

Problems reversing a Clearing document

Dear Frieds,
User has cleared few documents with Transaction Code F-32 during monthend process and now he wants to reverse the clearing document.
Trying to reverse through FBRA Tcode but it's giving error message as u201C Balance of the line items is not Zerou201D.
Could you please help me with this to rectify this error.
Thanks a lot for all your help.
Regards,
Hari.

Hi Hari,
Note 400530 - FBRA - F5136: Balance of line items not zero
Summary
Symptom
A payment using a payment card fails, in other words, the payment is reversed using Transaction FBRC where the customer or vendor item is reopened.It is not possible to reset a payment document posted again for the open customer or vendor item by using Transaction FBRA, "Reset Cleared Items" and it responds with the error message "Balance of the line items is not zero".
Other terms
Error message F5136, FBRA, FBRC, payment cards
Solution
A solution is available in the Support Package for Release 4.0B and 4.6C. An advance correction is possible. The solution consists of a repair report, so that the current payment document can be reset by means of 'Reset Cleared Items', and of a correction.
1. Repair-report ZREPAIR_BSEGC_FBRA:Create it temporarily as a test report using Transaction SE38. First the current payment/clearing document must be cleaned up of payment card data by means of the repair-report. Afterwards you can reset the payment document by means of 'Reset Cleared Items'. The report takes the current payment document as a parameter. In this case only changes are made to the database if the option "DO_UPD" is set.
2. Advance correction:Supplement the interface for function module CREDIT_CARD_POST_REFUSAL with table parameter T_BSEG with reference type BSEG. The following describes the procedure in more detail.
a) Transaction SE37: Enter function module CREDIT_CARD_POST_REFUSAL and choose "Change".
b) On the "Tables" tab page, create parameter T_BSEG with reference to structure BSEG.
c) Save and activate the function module.
3. After you implemented the correction or the R/3 Support Packages valid for this note, read Note 450081 to avoid the unwanted deletion of payment card data.
Regards
udayakumar.k

Reversing the cleared document

Hi experts,
My client posted a wrong transaction in PRD system considering the Cheque Deposit Account instead of Cheque Payment Account while making a payment. After this the transaction became cleared item, now when he is trying to reverse the document system throwing up an error saying "Document is cleared, not possible to reverse". Please could you suggest the way to reverse the cleared document.
Nanda

HI
For reversal of cleared document we have to follow the below step
1.Reset the cleared fi doucument in Transaction Code FBRA
Enter the Cleared document No ,Company code & Fiscal year then hit the clearing icon on the top press the reset the cleared document then the document will be reset
2. Check the status of the document in FBL1N it should be uncleared
3.Reverse the document in Transaction Code FB08
Enter the UnCleared document No ,Company code & Fiscal year then reversal reason ,posting date & Posting period then hit the document icon on the top press Post then the document will be reversed
Hope this will be usefull

Reverse Cleared Document

Similar Messages

Maybe you are looking for