Reverse Document Error showing as incorrect status

Have posted the document for the month of november 2009 through HR-FI integration. After that tried to reverse the same but that time period was not open and its showing as Incorrect reversal. But after opening the particular period and trying to reverse the same document but its showing that since the status is incorrect it cannot be reversed. Now i want to reverse those documents? how to resolve this?
Suresh

Hi,Kumar,
I have the same problem, so could you tell me how to solve this problem?
Thanks a lot.
Olivia Yang

Similar Messages

Reversal Document is Showing wrong figure in Service Tax Report

Hi All,
The data inconsistence in Service Tax Report.
The reversal documents are showing the excess amount while runnig the Service tax report.
Could you please help in finidng the reason and solution for this behaviour. All reversal documents are showing excess amounts in this case.
Thanks,
Nandu

Hi all,
The Tax transfer amount of reversal document should be Zero in ST Report and in Final GL. But the service tax report is showing wrong figures.
We reversed the tax transfer document to remove the wrong line from Serv. Tax Report as well as from Final GL.
As per the business requirement if any invoice and payment is wrongly done, that should be reversed.
Before reversal of this we need to reverse the tax transfer entry, then only we can reverse the payment as well as the Invoice.
Apart from this, If any other procedure please let me know in order to avoid errors in the service tax report
Regards,
Nandu

Reversal document issue for FB60

HI SAP Masters,
We are facing the one Issue, we made the Exit for vendor payable due to this reversal
document are showing the open items in FBL1N
Ex:
We have post the document through T code:FB60
Same document did the reversal through T code:FB08
FB60 & FB08
document should show in clear items ,but here FB60 is showing thw in open and
FB08 document is showing clear.
Plz suggest how clear the FB60 document
Thanks & Regards
HAri

Hi Hari,
Please check if the clearing date on the FB60 and FB08 document is something in the future. If yes and if you are running FBL1N with the current date, the FB60 document will show as open and FB08 will show as cleared. But when you take out the open key date from FBL1N selection screen, you'll not see the FB60 document open.
Thanks,
Basavaraj

Service entry sheet reversal document (Status: Error in process) List repor

Hi,
I have a requirement, to have or develop report which gives service entry sheet reversal documents (Status: Error in process),
while investigation i found below options (not exactly meeting my requirement)
1) Display and Process Confirmations Centrally >Document Category>reverse documents
which giving all reversed document list (need only error list) and it is giving only my puchasign group list (need all purchasing group list)
2) I can execute PPB_PD with BUS2203>status>I1019
is there any way/possible option that i can execute a report of reversal service entry sheets which ststus :error in process"
Thanks,
Jai

Hi Christian,
Thanks for your reply.
But this is what has happened. No the SES was not deleted in ECC before the confirmation was deleted in SRM. Our users don't have access to ECC T-codes.
Also I have checked the time at which the cancellation was created and everything is in sync.
How can i change the status of SES from 'Error in process' to 'posted in backend'?
Please advise
Thanks

How to Show String Error Message in SAP status bar?

Hello All,
I am doing some custom check in SBO_SP_TransactionNotification and Setting
   SET @error = -1
   SET @error_message='Duplicate Web Order ID'
   select @error, @error_message
But in SAP interface it is only showing -1 in status bar, I could not show error_message in status bar. How it could be achieved.
Thanks in advance

Hi
try this
SET @error = 1
SET @error_message='Duplicate Web Order ID'
select @error, @error_message
Regards
Arun

GL Line item not show reverse document

Hi Guru !
I have problem about GL account that assign account management to be line item so when post entry and reverse entry by use this GL account ,when I see report on t.code FBL3N-GL line item ,they did not show indicator of reverse entry so it difficult to check so I would like this report to reverse indicator or there are some report that can show it . thank you very much.
Bluesky

Hi,
Check the Layout of FBL3N Report
1. Change Layout Ctrl+F8)
2. Add the Reversal Indicator field
3. Save the Lay out settings
Check the Reversal Indicator. If any Key is there It means Reversal document.
Hope. Your problem solved.
Regards,
Kishore K

FF16 always fails to sync, it always shows "Sync encountered an error while syncing: Incorrect account name or password. Sync will automatically retry this."

I'm having this problem since few releases ago, whenever I start FF, it always fails to sync, showing this line on the bottom "Sync encountered an error while syncing: Incorrect account name or password. Sync will automatically retry this action". First thought that the prob was incorrect credentials, but I can freely log-in https://account.services.mozilla.com I tried unlinking and linking my device again, it still happens.
I waited thinking that they'll fix this, from a release to another, today updated to the last version and it still happened.
Firefox: ~16.02
Windows 7 Ult SP1
http://img853.imageshack.us/img853/4070/ffsyncprob.png
Awaiting reply,
Thanks.

I am having this problem with FF 19.0.2 on Win 7 Pro. The sequence of events is:
1. Start Firefox. Get the error bar about incorrect account name or password EVERY time. I close the bar. If I wait a while and then ask FF to try again the error bar reappears.
2. Click on preferences from the bar, and get a dialog "Your password was rejected by the server, please update your password." I click "update" and then am prompted for the master password for the security device. I enter that and am presented with an "update password" dialog.
3. Enter my old password and click "update password." Receive error message "Password incorrect, please try again." I click update again and get the message "Your password has been changed."
4. However now Sync no longer seems to be set up. I go through the setup ritual again, and find I am back where I started.
I have cleared cookies, tried everything in safe mode, and unlinked and relinked the computer. I have verified I have the right password entered at [https://account.services.mozilla.com/ https://account.services.mozilla.com/] None of this helped. The problem is still there, even in safe mode.

Show document flow (original and reversal document) in MIGO

Hi,
Scenario
- (MIGO) Create material document Mtype 201 (document 1)
- (MIGO_ Ceate reversal document Mtype 202 (document 2)
Questions
-How to find what document 1 was reverced
-How to see which document is reversed by document 2
This relationsheep is stored in MSEG, but is not shown in MIGO... or I can not find it.
Thank you!
Andrey Garshin.

MIGO is a transaction code.
When you choose display - material document number, It will fetch all details from MKPF and MSEG table.
You reverse material document number is saved in table MSEG,
Your question :
-How to find what document 1 was reversed
-How to see which document is reversed by document 2
Answer 1. Go to MSEG table, give the document 1 in field SMBLN.
Then Click execute.. If you find any entry, then the material document number reversed.
You can find the reversed document number in field MBLNR.
Answer 2. Select "Cancellation - Material Document" in MIGO, then enter the material document number 1. Then press execute.
After pressing execute, you will see the message.
That means this document is reversed..
Regards
Dev

Dump in production system :Incorrect status in pricing

Hi All,
We have patched out SRM5.5 server system recently with 15 and 16 patch.
After the patch we are getting many dums in production system.
When i check in the ST22 ,the error syaing that
Error analysis
    An exception occurred which is explained in detail below.
    The exception, which is assigned to class 'CX_BBP_PD_ABORT', was not caught and
    therefore caused a runtime error.
    The reason for the exception is:
     *Incorrect status in pricing*
How to correct the error
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "UNCAUGHT_EXCEPTION" "CX_BBP_PD_ABORT"
    "SAPLBBP_PDH" or "LBBP_PDHU08"
    "BBP_PD_ABORT"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
and i have checked the IPC ,it is also active only,.
We have got his issue all of suddenlly,
Can any one tell us what could be the issue.
Regards
cb

Hi All,
thanks a lot for your response ,
I have done the Simulation which shows everything is fine and i have chcked with BBP_CND_CUSTOMIZING_CHECK t-codes even that is also correct only .
we are plannning for rasing the issue with SAP.
Besides that the system might have activated the BADI simple pricing active (or something like that). This would give trouble as well with the IPC (they can't both be active).
@Robin which the badi we can check.
once agina thanks a lot for your replys.
Regards
cb

Why miro reversal is not showing reference of original miro.

Dear experts
Why miro reversal is not showing reference of original miro. There is any provision for in system for that?/
regds
sachin

Hi Sachin,
While MIRO Reversing through MR8M Transaction code only.
Where you should Enter the MM- Document Number (Not for FB03- FI Document Number)
Check before Reversing the MIRO Document in MIR3.
If the Above answers are correct Which type of Error comming let clarify.
Regards,
Kishore K

Material Document Not Shows the System

Dear All
In my client is Done the Migo W r t Po but that Materail document not shows the PO History and Mb51, but i check the PO in delivery is Complted in delidery status. plz i need your help.
Thanks And Regards
Sonu

Sorry ya, its not Coming, material document does not Exist. error is comeign.

Posting run cannot be posted Incorrect status

Hi,
we are running transaction for Posting to Accounting : Create Posting Run.
For many employees the posting was done properly but few says No Document Created. and the error
Posting run cannot be posted : Incorrect Status is flashed.
Please shed some light on this... What should be the error?

Hi,
when u run the tcode for posting
- enter Payroll area
- Give" S" in "" Type of document creation""
- Enter the posting variant
Execute
- If you get the error in initial screen
click on the red button -
u'll get a message.
doubleclik and you'll get the details of the error.
Else
-Goto Document Overview
Double click on the line
- Go to the bottom of the document and you can read the error.
Double click on red button anu u'll get the detail.
Hope this helps.
Regards,
Param

"...not a valid Photoshop document" error when opening Mac cc file on PC

I get a "Could not complete your request because it is not a valid Photoshop document." error message whenever I try to open up a PSD file created on a Mac using Photoshop CC on my PC using CC. Other people have been able to open the file from the same location, so the files aren't corrupted. Anyone know how to fix this?

I know this thread is a bit old, but I wanted to share my experience and solution in case anyone else runs into this.
The other day, I spent many hours editing some photos for a client. I saved them all and closed Photoshop. When I tried to open the .PSDs, they all came up with this "Not a valid Photoshop document" error. I was freaking out. I could see the thunmbnails and previews with the MacOS Finder and could see the images just fine in Lightroom, but couldn't open them in Photoshop CC.
Finally, I remembered that these were NOT supposed to be .psd files! They were supposed to be TIFFs. What happened was, when I edited them from within Lightroom into Photoshop, they opened as TIFFs. However, when I did "save as", I wanted to name them similarly to some other files I had. I clicked on one of the existing files to copy the file name in the Save As dialog to make it easier to name the new file I was saving, but I didn't realize it was changing the file extention from ".tif" to ".psd" as well. The older MacOS (version 9 and earlier) didn't rely on file extensions fo identifying file types, so it didn't hit me right away that this would be the problem. When I changed the incorrect .psd file extension to .tiff, the files opened in Photoshop just fine.
SO... if you run into this "Not a valid Photoshop document" error, try figuring out if it's actually another file type (.jpg, .tif, .png, etc) by either getting the file info from another program or just experimenting with different file extensions. Chances are good that your file isn't actually corrupt, but just named improperly!

Posting date is wrong in the reversal document in FI document

Hi All,
We have one issue related to Posting date. We need your valuable feedback on the same:
Issue:
There are some documents which reversed in the month of Mayu20192010 but the posting date is coming as Marchu20192010 which is very strange. The Original documents posted via transaction code F110 in the month March and reversed in the month May but the posting date of the reversal document is coming as March which is NOT correct.
Analysis:
Our first analysis is that, the posting of Original document happened when the system was in 4.6 version and reversal happened after ECC go live. We are not sure if that could be the reason.
Secondly, we checked the change log of transaction code OB52 but there is no change for the posting period 3 in the month of May.
Thirdly, we tried to replicate the same scenario in our development system but here we are getting the error that Posting period is not open which is correct.
Request you to please look into it and provide you input.
Thanks.
Regards,
Ajay Kumar Tiwari

Hi,
By any chance, did the user enter march date in FB08 screen ?
Best Regards,
Madhu

Resetting this reverse document is not possible - FBRA

Hi,
I'm trying to reset the cleared items with Tcode FBRA also system is throwing error like below
==================================================================================================
Resetting this reverse document is not possible
Message no. F5579
*Diagnosis
The system required a reverse document to be created after resetting a clearing procedure as otherwise documents would have been generated in the system which could not have been processed correctly. The following cases require the clearing document to be reversed:*
Exchange rate differences were posted.
=================================================================================================
the document has items of exchange rate differences, but,
Question: The exchange rate difference it's related with t-code fagl_fc_val ???l

Hi,
Reverse the document using FB08 and input the reversal document no in the reset transaction FBRA.
Hope it works.
~Andrew

Reverse Document Error showing as incorrect status

Similar Messages

Maybe you are looking for