Reverse Entry of Bullet Points

Hi,
Bit of context.... Every week I host a pub quiz which has two projected elements onto screens in the bar. One is a ten-question round of pictures, the other is a leader-board where the positions of the teams get ranked.
Up to now everything has been done in Powerpoint, but because Keynote effects are that much prettier (I mean... wow!) I've decided to switch over.
Trouble is, for the leader-board I can't find a way to display the placings of the teams in reverse order - i.e. start with the team (or teams) in last place showing at the bottom of the slide and then bring in the next team (or teams) in third, second, etc above them.
It's the one thing I've found so far that's a doddle to do in Powerpoint but I can't see a way of doing it in Keynote.
My only thought is to do separate and multiple text boxes with their own builds, but that's a bit more fiddly than I'd like. (For one thing I don't know how many I'd need before the start of marking, whereas bullets auto-number.)
So... for my first post here I thought I'd ask if anyone had any brilliant ideas? Or am I cursed to use Keynote and Powerpoint at the same time?

Hi Rob,
I wouldn't use Powerpoint again... that way lies madness.
I don't think there's a way to do exactly what you're asking. I just fiddled around with the builds myself and couldn't get a numbered list to reverse-build. But there are a couple of things you could consider doing. Firstly, have you thought about making your list with the last-place team at the top of the slide and building down? I'm sure you've thought of it, but it seems a minor design change to me.
The second, more complicated thing you could do is that you could set each bullet point as its own separate text box, and then you could build them in in any order you'd like. This will require a bit of setup the first time, but I'm sure you're just using the same template and typing over the information anyway. I'd make Arrange > Align Objects my best friend if I did that.
Hope that helps!
—Hazy

Similar Messages

TDS reversal entry is not getting generated at time of F-54

Dear All,
I have made down payment request through F-47 transaction code and down payment made by Transaction code u2013F110 (instead of F-48) and TDS is deducted at this point. There after I made invoice through MIRO / F-43 in which TDS is again deducted for whole invoice amount. I have cleared down payment through T.code F-54. But at this time TDS reversal entry is not getting generated and only customer account is credited and debited.
So in short TDS is getting deducted at time down payment and at time of Invoice for their respective full value.
Note: For TDS type on payment I have selected u201CCentral Invoice PROPu201D and we are not using business place and section code. Please help me.
Appreciate all expertsu2019 help ASAP.
Thanks ,
Manas kumar

Hai Manas,
If ur not using business place how can u get remitance chalana thats why first u can configure the business plance. I think ur already posted some entries its correct? In this case u will run this t.code business place update the previous entries i.e., J1INPP this is very useful to u
Regards
Madhu I

How would I create "bullet point" titles in Premiere CS6, without creating individual titles?

What I mean by "bullet points" is how they did the titles in this video: http://www.youtube.com/watch?feature=player_embedded&v=NHGAEqeXTeY
I know you could do it by creating a different title for each line and then manipulating them on the time line but seems like there should be an easier way to do that. Could someone help me out please? Thanks.

It might be possible to achieve that effect without creating individual titles, however creating a stack of titles is the easiest and most strait forward way.
Create a finished screen 1st, with all the elements that will appear by the end of a title sequence. Click the "new title based on current title" button to create a copy, then delete the last title element on the page, then repeat until you are just left with the 1st element that you want to appear on screen.
Overlay them on your timeline in reverse order of creation, and you have your effect.
That should be the easiest way.
Good luck.

Need some hand-holding and bullet point direction

ok, i need some help. We shoot our church services on Sony PDW-700 HD XDCAMS. We shoot in 420 HQ (whatever that is). Once we finish shooting the service, we pull the source video off of the XDCAM disk using the Sony XDCAM transfer utility. I believe we end up with a .mls file. We then edit the source and send it to compressor and then to DVD studio pro and it gets burned to a standard DVD. What we end up with is a video with artifacts in it. What I mean by artifacts is wavy lines around the edges of movement.
What I need to know, from step 1 to step whatever, is HOW to get the source from FCP to DVD w/out artifacts. It seems that we should be able to produce a DVD that looks better than ours and w/out the wavy lines around the edges of moving objects.
What I'm looking for is something like this:
When we open FCP, are there any preferences we need to have set before we import our source or will FCP adjust our project settings to match our source?
When done editing, do we need to do anything special when we send it to compressor?
Once in DVDSP, what do we need to be doing to make sure it comes out looking it's best.
I realize I am asking a lot here, but we're not novices. We understand things like the format of our media, etc. We're looking for a list or bullet point process to get from Media to DVD and have it look it's best.
Thank you
Cliff

If you have any doubts regarding the format you shot,
look in the Browser, control-click the media file, and select Item Properties > Format.
That will tell you exactly what FCP thinks you're using.
Note that if Field Dominance is None, your clip is progressive.
In the future, you should ask your camera crew to shoot progressive.
crp0499 wrote:
Creator: QT Player
Source: HD 2:XDCAM
Vid Rate: 29.97 fps
Frame Size: 1440 x 1080
Compressor: XDCAM HD 1080i60 (35 mb/s VBR)
You may want to simplify the workflow by setting your sequence up first.
Before you create any sequences, choose menu item > Easy Setup,
and choose one of the XDCAM presets.
• Chose Sony XDCAM HD
• Choose HDCAM HD 1080i60 VBR
• Choose framerate 20.97
Once you do this, all new sequences will have that format.
If you've set your sequence up correctly, dragging a clip to the sequence will not produce this:
For best performance, your sequence and external video should be set to the format
of the clips you are editing. Change sequence settings to match clip settings?
If you click yes, you are not transcoding. You are setting the sequence format to be the same
as what you shot.
The bottom line is that when you set the sequence to match the footage,
you should be able to play the footage without rendering. Of course,
once you start editing and adding transitions, rendering may become
necessary. Check out the note on rendering to ProRes 422 in this article:
http://www.kenstone.net/fcphomepage/ex1_sd_outputyoung.html
Although he's talking about going from XDCAM EX to a PAL DVD,
most of the principles apply. In particular:
• Set Rendering preferences to ProRes 422, i.e.
Sequence Settings > Render Control > Render > Codec
• Do your HD edit.
• When it's time to convert to SD (step 2 in the article) create a new sequence
with the settings NTSC Anamorphic. This will preserve the nice wide-screen look
of the original footage even when played on an SD DVD.
• Step 4 of the article: choose NTSC anamorphic.
If your footage was shot interlaced, choose field dominance lower (even).
The compressor is NTSC, and the frame rate is 29.97.
In the advanced compression settings, note that it should be 16:9,
and Progressive if you're shooting or converting to progressive.
Check out the last section of this article:
http://www.lafcpug.org/features/featurekeeping_thejob.html
where field dominance is discussed in more detail.
Right when you got the WiFi, file-sharing, and printing working great–
they hand you a video camera!
I've got the reverse problem.

How can I use bullet points on the ipad keyboard?

When writing Notes, on my iPhone, there is a key for bullet points on the keyboard. This doesn't seem to exist on the iPad3 keyboard and just wondered if there is any other way to use bullet points on iPad. They are both set to the English UK keyboard.
Thanks.

There are many other keyboard keys that are hidden under the standard virtual keyboard keys. They will vary from keyboard to keyboard based on your language settings but this article will point you in the right direction.
http://www.my-iguru.com/ipad/ipad-hints-tips/ipad-special-characters.php

Unordered list not showing up as indented bullet points within Accordian

http://www.foundationforyoutharts.org/test/Programs.html
I have a page using the spry accordian, and about five different catagories of information. Some of the copy is in unordered lists (in martial arts catagories), but it shows up as as regular text. Any ideas on how to make it view as a typical unordered list with bullet points and indented?
Thanks for taking time to look at this.

Add a margin-left of 20px to your ul.
Either added it in your stylesheet. or directly on the element:
<ul style="margin-left:20px">

Use mask to show one bullet point at a time

I have content in multiple bullet points of text. The background is a texture. I'd like to use mask to show the text in sync with audio. It works but the text is the color of the mask. I have bullet point itself in a different color. How can I mask the area to show and use its own color?
Or is there a better way to sync multiple bullet points of text without having each bullet points in its own layer and MC?
Thanks,

make sure your font is embedded.

Expense for the price difference by reversing entry of goods

Hi Experts,
There is an Expense for the price difference by reversing entry of goods. Conceptually is this correct?
Thanks in advance.
José Luis

Hi
Price difference during reversal of GR may be correct due to the change in price between GR & reversal.
It depends on price control whether S-Std price or V-Moveing average price in the Material Master accounting view.
Karthik

What are the ways to reverse entry in tcode FB08 automatically ?

Do We have any method to post the reverse entry in transaction code FB08 automatically ?
I have to post the entry from my executable program.
I tried using a BAPI, but that is not working out for me.
guide me

Try FM 'CALL_FB08'
Svetlin

Bullet Points & Attachment Preview

Just switched from Entourage to Mail in anticipation syncing w/ a new iPhone. However, when composing emails I can't figure out how to create a bullet point list in the body of the message.
Also, is there a way to configure your inbox to preview attachments (e.g. as in Entourage)?

I put this together very rapidly:
No Table involved. It's grouped text and squares. - Fabe

Lightroom wants to me to install 5.6, but the download link takes me to a page with plain text bullet points, none of which are the update link. Can anyone give a direct lnik?

Lightroom wants to me to install 5.6, but the download link takes me to a page with plain text bullet points, none of which are the update link. Can anyone give a direct lnik?

Google "lightroom 5.6" and direct links to both Mac and Windows will be at the top.

How to copy the bullet point format/style from MS Word to Pages?

Hi everyone,
I'm trying to make the swap from Mac Word to Pages but the one thing that frustrates me so much to the point of not using Pages is the bullet point system.
In Word the set spacings are exactly how I want them - whereas in Pages, everything is tighter - there is less space between the margin and the point, the point and the text etc.
I've painstakingly inserted all the spacings from Word into Pages and saved it as a "style" but it just reverts back to the default positioning when I open up a new document and select my saved style.
Any ideas / a magic tool to just copy the style from Word? It's such a shame because Pages is a much slicker programme than Word and I really want to use it but as a student, bullet points are my world.
Thanks,
James

Hi Peter, thanks for your reply.
Yeah I get the font and formatting for the text copied no problem when copying but I'm talking about from scratch in a new document, I insert a bullet point and even when selecting my saved style, it just reverts back to the default.
I agree, massive pain. It is the only thing stopping me from making the full switch now iCloud Drive is getting close to Dropbox.
Am I a misguided fool for thinking there's a patch or modification of some description that can copy the default bullet spacings from Word and create a new style following them in Pages?
Thanks, James

Undesired bullet pointed text automatically upon creating a new text box

Hi there! Due to the snow I'm working from home today but I have a little problem back in work that would be nice to get some help on before i go back hopefully tomorrow so i can continue at full speed!
I'm using Mac OS X (can't remember which version from the top of my head but something quite new!), and InDesign CS3. Basically, every time i create a new text box, or place an excel file into the document (having to do a lot of that at the moment, creating a price guide), it is in bullet point form, and although it's quite easy to go and turn it back off, with me having to do this quite a lot it's getting somewhat frustrating. It does it every single time i create a new text box even if i have turned it off for the previous one
I'm pretty sure this is going to be one of those "oh, you just need to..." problems with a really simple answer...i hope so anyway!
Cheers dears!
Linz

Thanks guys, i now seem to have a related problem at home. Here i am using CS2 but working on the same document as at work. I have made sure nothing is selected and set my character and paragraph styles to basic, and hey presto, when i create a text box, all is well. However, when i create a table, and i type in a cell, the bullets return! I have just discovered that turning them off in CS2 doesn't seem to be as simple as CS3 - so firstly - how do i do that?! And secondly - any ideas why it is happening but only in tables?!

Bullet points in Word for Mac

When I have a bullet point list in Word, after pressing enter the next bullet point won't show up until I start typing. Is there anyway to change it so the bullet appears as soon as I press enter?

You should probably be posting on Microsoft's Mac forums since its their software you're having issues with:
http://answers.microsoft.com/en-us/mac

Installed Yosemite and my power point bullet fonts have gone weird. How can I revert back to original bullet point menus

Since installing Yosemite the font menu on my bullet points has changed to strange symbols. I am using Office for mac 2011

so what are you moaning to us about? you want an older JRE, go install it. I don't know why you're taking this as some personal insult or something, it's not like anyone here is either responsible for this or can do anything about it.
Your little playground fight with MS concerns me not in the least.what playground fight? by and large, everyone here is a programmer who uses the java programming language in a professional capacity. that's got absolutely nothing whatsoever to do with the JRE arguments of a few years ago. get your facts straight

Reverse Entry of Bullet Points

Similar Messages

Maybe you are looking for