Reverse PO Release strategies - "Document has already been outputted"

Hi SAP Expert
need your help to solve this issues. I'm trying to reverse back the PO release strategies in order for me to change the GL code, when i click on the reverse indicator the system tell me that "Document has already been outputted". what does this message mean and how do i resolve it ?

Dear Nikamz,
It means that the PO is already been outputed , you can to ME23N--> messages button.
Also In the PO release strategy--> release indicator, we can set if the PO with such release indicator  is release for transmission.Suppose you can still change the PO. Also check to user exit for your PO transaction.What is the Changeable value in your release indicator?
Regards,
w1n

Similar Messages

  • HOW TO REVERSE A JOURNAL BATCH THAT HAS ALREADY BEEN REVERSED

    제품 : FIN_GL
    작성날짜 : 2006-05-30
    HOW TO REVERSE A JOURNAL BATCH THAT HAS ALREADY BEEN REVERSED
    ===============================================================
    PURPOSE
    이미 Reverse된 원 Journal을 Reverse전 상태로 돌리고 싶을？？
    Explanation
    아래와 같이 원 Journal의 reference를 끊으면 원 상태로 복수시킬수 있다
    Example
    update gl_je_headers
    set accrual_rev_je_header_id = '',
    accrual_rev_period_name = '',
    accrual_rev_status = ''
    where je_header_id = <YOUR JOURNAL ENTRY'S JE_HEADER_ID>
    Reference Documents
    Note 1031929.6

    Hi there,
    Not exactly sure what you wanna do... but here is what I've understood...
    You can remove any old Transport Set in your Portal by going to the Browser Transport Sets within the Builder page over the Administer tab.
    As to import a new Transport Set into the Production server, what I suggest is that you make a valid backup (so that in case you have any problem it is easier to revert back) and later on override it (or if it is a major change, it would be better to drop the Page Group and reimport it clean) or import it clean to your Production server. Validate all things... and that's it.
    I hope it helps...
    Cheers,
    Pedro.

  • Error Message: "One of the base documents has already been closed".

    Hello everyone
    I would appreciate very much if someone can help me.  The following error message prompts up when trying to create a Credit Note BASED on a A/R Invoice: "One of the base documents has already been closed". it is necesssary to say that we are not changing anything in between the two documents.
    We are running SAP Business One 2007A PL49.
    Thanks very much
    Claudia

    Hi.
    Please read this SAP Note: [854781 Error message "Invoice is already closed or blocked".|https://websmp230.sap-ag.de/sap(bD1lcyZjPTAwMQ==)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=S&note_numm=0001290054|Click here to view].
    This issue could be related to decimal places in amounts.
    This could be caussed by changing the decimal places for amounts, prices, etc. in General Settings.
    Regards.

  • Error: One of the base documents has already been closed (-10)

    I have a web service to get and set pick lists and add delivery notes via DI Server. but I have one scenario that causes the error 'Error: One of the base documents has already been closed (-10)':
    i have a pick list with item A1 with a quantity of 10. I pick and delivery 3. now the pick list is closed and in the picklist creation dialog I can choose the remaining 7 of A1 for another picklist. but if I do so and then try to pick and delivery the remaining 7, I'm getting that error. The sales order, that is the base document of the pick list and the delivery, is still 'open'. so, what base document is meant here?

    I found the error. I tried to add the DocumentsAdditionalExpenses to the second delivery, too, and this is not possible.

  • Document number in company code and fiscal year has already been

    Hello,
    While doing a PGI of a delivery in VL02N transaction, I am receiving a dump with the above message in the subject.
    Short text of error message:
    Document number 6200 4900000020 2010 was already assigned
    Long text of error message:
    Diagnosis
         Document number 4900000020 in company code 6200 and fiscal year
         2010 has already been assigned.
    System Response
         Termination of processing.
    Procedure
         Check document number range 49 in company code 6200 and fiscal year
         2010 and correct the number range status if necessary.
    I am not sure of the way the number range clearing in SM56. I need to know the object and subobject for the delivery number for the same.
    Does anybody knows about it ?

    What would be the object and subobject for a delivery number entered in VL02N transaction ?
    There are many objects present in VL02N transaction but I am not able to figure out the real one which is needed.
    Please help me with the same.

  • Document number 1700000000  has already been assigned

    Dear all
    I create a credit memos but when I post I receive message "Document number 1700000000 in company code HDQC and fiscal year 2008 has already been assigned"
    I checked in IMG define number range but I don't know where to assign number range to document type
    Anyone tell me why I meet this error and how to fix it
    Thank in advance
    Minh

    Use Transaction code OBA7 to go to Change view Document Types.
    Select and double click on Relevant Document Type
    Assign Number Range
    You can also view number range information from this screen to check number ranges.

  • ChaRM: Incorrect message "request has already been released"

    Hello experts!
    I have a fresh working ChaRM implementation and facing an error that SOMETIMES happens. ChaRM cannot release a transport request, with all tasks released, and an error message is shown in SCMA:
    "Transport request DLDK959614 can no longer be changed
    Message no. /TMWFLOW/TRANSPORT_N643
    Diagnosis
    The request DLDK959614 has already been released.
    System Response
    The system does not allow you to create a transport of copies.
    Procedure
    It is not usually necessary to create a transport of copies for a request that has already been released. Perhaps you entered an incorrect request, in which case you have to enter a different one."
    In fact the transport request IS NOT REALESED. The workaround I am using is to momentarily allow the "manual" release via SE09. And then I follow the normal process until reach the production environment.
    I could not find anything wrong with those transport orders. The only fact that made me think a while is that a new task list was created.
    Does anyone have a clue?
    Thanks!

    HI  Jose,
    DO you have solution for this issue, I am getting same error
    Dinesh

  • 8Z 775 Error Asset ... has already been revaluated; no futher postings can

    Hi gurus,
    I wrote because I have a problem with transaction J1AI.
    I'm from Chile and I'm working with 8.928 assets in SAP R/3 6.0.
    My problem is when I run J1AI transaction just 7.600 assets are
    revaluated, but 1.328 have the following message:
    Asset xxxxx has already been revaluated; no futher postings can be made
    Message no. 8Z775
    Diagnosis
    +You have already revaluated asset xxxx (subnumber xxx). You cannot make
    a difference posting in the period you have chosen, either because the
    asset has already reached the end of its useful life or you have changed
    the useful life in the asset master.+
    Procedure
    +The values that you are trying to post would lead to inconsistencies in
    the system. It is possible that you may have recently changed the
    Customizing data or asset master data. However, if you still wish to
    proceed with the posting, reverse the accounting documents for the period
    in question and execute the Asset Revaluation program again.+
    The problem is that I've not made changes in the Customizing or in the
    asset master data.  
    I've been looking a SAP Note but I didn't find anything. Somebody of you can give me a hand?
    Greetings Marco

    Dear Marco,
    Please check few things as under:
    1. Normally the document which get posted appears in Asset Exploer AW01N.
    2. Transaction J1AI has a optioon to post directly or through batch input, in case of batch input it creates a batch input session which one has to execute in transaction SM35. If you no one has executed SM35 session would essentially mean, no entry got posted.
    3. If someone has posted directly without batch input then you can check the postings througn table ANEK by inputing Company Code and user who has posted it.
    4. Also similarly you can check BKPF table for FI postings.
    5. You can also check SM35 about the sessions as it is available even after the transaction got posted thourgh sessions execution.
    Not withstanding the above, it appears that no documnets have been posted yet otherwise it would have appear in the asset.
    If the above does not resolve your issue then perheps one need system access to check the possibility, advise you to raise with SAP through OSS message.
    Thanks!!!
    Murlidhar Khatri

  • How do you transfer playlists from on computer to a new one, library has already been transfered

    how do you transfer playlists from on computer to a new one, library has already been transfered

    - Why not just copy the iTunes computer folder to the new computer?
    - You can transfer iTunes purchases to the computer by:
    iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
    - You can transfer non-iTunes purchased music by using one of the third-party programs discussed in ths previous discussion:
    Best iPod to PC
    - Unless you can move/copy the iPod backup file from your old computer to the new one and restore from backup, you will have to restore to factory defaults/new iPod and thus loose all app date. The iPod backup file is located:
    Mac: ~/Library/Application Support/MobileSync/Backup/
    Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
    Windows Vista and Windows 7: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\

  • Prometric refund not paid after cancelling an exam and my visa card has already been charged USD15 for the cancellation fee !

    Below is the email i sent to prometric following up my refund after cancelling an exam and being charged USD 15 for the cancellation fee, but no one is saying anything up to now or any explanation on when i should be receiving my refund.
    Hi,
    In regards to the above subject field and below cancellation details for an exam 070-681 - 
    TS: Windows 7 and Office 2010, Deploying.
    I have cancelled for the exam and my visa card has been charged for the cancellation fee of USD 15, but i have
    not received the refund as yet.
    Please do the needful so that i can book for another exam as soon as possible.
    Your urgency in this matter will be highly appreciated !
    Sincerely,
    Salim.
    ----- Forwarded Message -----
    From: @prometric.com" <@prometric.com>
    To:
    Sent: Monday, August 25, 2014 1:08 PM
    Subject: Prometric Exam Information (Z29LON501E)
    Dear SALIM,
    Thank you for cancelling your exam with Prometric, a leading worldwide provider of comprehensive technology-based testing and assessment services. Your cancellation request has been received and confirmed.
    Included within this e-mail is your official appointment summary. Please retain this information for your records.
    Included below are answers to frequently asked questions. Please do not reply to this e-mail. For additional assistance, you may visit our website at
    Appointment Summary
    Order Confirmation Number/Document Number: Z29LON501E
    Candidate's Name:
    SALIM MOHAMED
    Candidate Address:
    77852
    NAIROBI, KE-300 00610 Kenya
    Candidate Company:
    Candidate Primary Phone:
    Candidate Email Address:
    @yahoo.com
    Exam Details:
    Program Name:
    Microsoft (070, 071, 074, MBx)
    Exam Name/Description:
    TS: Windows 7 and Office 2010, Deploying
    Exam Number:
    070681
    Exam Language:
    U.S. ENGLISH
    Appointment Date:
    Appointment Time:
    Appointment Duration (HH:MM):
    4:00
    Please note that the appointment duration may include an exam tutorial and client survey.
    Test Site Code:
    KN7H
    Test Site Address:
    57666,00200,1st Floor, Fedha Plaza,
    MPAKA Road Junction, Westlands,
    Nairobi, 00200 Kenya
    Test Site Phone:
    0203744720/
    Payment Details:
    Exam Price/Currency:
    80.00 USD
    Discount (if any):
    0.00 USD
    VAT/GST/Sales Tax:
    0.00
    Date of Payment/Tax Point:
    24 AUG 2014
    Total Amount Paid/Currency:
    -80.00 USD
    Payment Type:
    VISA
    Cancellation Fee(if any):
    15.00 USD
    Reschedule Fees (if any):
    Payment Date
    Amount Paid
    Frequently Asked Questions
    How will I obtain a refund?
    If your credit card has already been charged and you are eligible for a refund, you will receive a refund along with a charge for any applicable fees. If a voucher was used, your same voucher number will be reactivated.
    How can I Check my Appointment Status?
    If you would like to review the status of your appointment, please visit. Choose "Candidate History" then login using your e-mail address and password.
    What if I forget my Prometric Internet password?
    If you forget your Prometric Internet password click on the following link
    You will be asked to enter your e-mail address or user name, then a new password will be mailed to you at the email address you have on file with Prometric.
    How do I update my candidate profile?
    Please take a moment and confirm that your personal information listed above is accurate, as this is how your name will appear on any certificate earned and the address to which all certificates and communication will be sent. To ensure proper
    delivery of your exam and all certification materials, Prometric must have accurate and current information. If any information needs to be updated, please visit  choose "Update Personal Information", then login using your e-mail address and
    password.
    Please note: This address reflects your permanent, home address. To ensure delivery of official correspondence and certification material, you may also provide name and address information in your
    country's official language.
    Can I contact Prometric with specific questions?
    If you have taken your test, plan to take a test with Prometric, or have any other concerns, please follow the appropriate links below to help solve your issues:

    Hello,
    The TechNet Wiki Forum is a place for the TechNet Wiki Community to engage, question, organize, debate, help, influence and foster the TechNet Wiki content, platform and Community.
    Please note that this forum exists to discuss TechNet Wiki as a technology/application.
    As it's off-topic here, I am moving the question to the
    Where is the forum for... forum.
    Karl
    When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
    My Blog: Unlock PowerShell
    My Book:
    Windows PowerShell 2.0 Bible
    My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

  • GetOutputStream() has already been called for this response

    I have a problem with my servlet,
    i compiled my code,it works normally but there is an error occured when it works.
    The error is :
    java.lang.IllegalStateException: getOutputStream() has already been called for this response
    *     at org.apache.catalina.connector.Response.getWriter(Response.java:607)*
    *     at org.apache.catalina.connector.ResponseFacade.getWriter(ResponseFacade.java:196)*
    *     at org.apache.jasper.runtime.JspWriterImpl.initOut(JspWriterImpl.java:125)*
    *     at org.apache.jasper.runtime.JspWriterImpl.flushBuffer(JspWriterImpl.java:118)*
    *     at org.apache.jasper.runtime.PageContextImpl.release(PageContextImpl.java:179)*
    *     at org.apache.jasper.runtime.JspFactoryImpl.internalReleasePageContext(JspFactoryImpl.java:116)*
    *     at org.apache.jasper.runtime.JspFactoryImpl.releasePageContext(JspFactoryImpl.java:76)*
    *     at org.apache.jsp.KaptchaExample_jsp._jspService(KaptchaExample_jsp.java:209)*
    *     at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:98)*
    *     at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)*
    *     at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:331)*
    *     at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:329)*
    *     at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:265)*
    *     at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)*
    *     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:269)*
    *     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:188)*
    *     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)*
    *     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:174)*
    *     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)*
    *     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:117)*
    *     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:108)*
    *     at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:174)*
    *     at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:874)*
    *     at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:665)*
    *     at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:528)*
    *     at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:81)*
    *     at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:689)*
    *     at java.lang.Thread.run(Thread.java:534)*
    here is my code :
    Iterator iter = ImageIO.getImageWritersByFormatName(imageFormat);
    *          if( iter.hasNext() ) {*
    *          ImageWriter writer = (ImageWriter)iter.next();*
    *          ImageWriteParam iwp = writer.getDefaultWriteParam();*
    *          if ( imageFormat.equalsIgnoreCase("jpg") || imageFormat.equalsIgnoreCase("jpeg") ) {*
    *          iwp.setCompressionMode(ImageWriteParam.MODE_EXPLICIT);*
    *          iwp.setCompressionQuality(imageQuality);*
    *          //writer.setOutput(ImageIO.createImageOutputStream(response.getWriter()));*
    *          IIOImage imageIO = new IIOImage(bufferedImage, null, null);*
    *          writer.write(null, imageIO, iwp);*
    *          response.flushBuffer();*
    please help me,would u give me a solutions for my problem..i really appreciate if you want to give a solution.
    Regards,
    Dany Fauzi

    Actually the stack trace indicates the the error is happening in KaptchaExample.jsp, not in a Servlet. I'm guessing that the code you've presented is in a scriptlet (i.e. inside the JSP in <% %> brackets). This is altogether the wrong place for it. JSPs are purely for generating HTML and to try and generate image responses in one is doomed to failure. Write a servlet class to generate your image file. If you want to embed a dynamically generated image in an HTML page, then you need to generate HTML which accesses the Servlet through the <img src=... tag, i.e. the browser retrieves the image data as a separate transaction.
    The immediate source of the crash is that the JSP already opened the output stream in order to write HTML output, so it's too late to try and open it for the writing of image data.

  • Upgrade 4.5B to 4.7 -- ERROR: "VBAK has already been declared".

    Dear Friends,
    After upgrade 4.5B to 4.7, there is the same ERROR when executing most of SD transaction and creating/displaying/modifying PO and GR.
    This error is related to SD pricing procedure. In the ABAP error dump said that: VBAK has already been declared. I have tried to look for SAP Notes but cannot find one.
    I think this problem is a common problem in upgrading from 4.X to 4.7. Need help from you guys who ever have upgrading experience.. : )
    Does anyone know on how to FIX this problem?
    Cheers,
    Will
    THE ABAP DUMP is as below:
    ===============================================
    Syntax error in program "SAPLV61A ".
    What happened?
    The following syntax error occurred in the program SAPLV61A :
    ""VBAK" has already been declared."
    Error in ABAP application program.
    The current ABAP program "SAPLMEPO" had to be terminated because one of the
    statements could not be executed.
    This is probably due to an error in the ABAP program.
    What can you do?
    Please eliminate the error by performing a syntax check
    (or an extended program check) on the program "SAPLV61A ".
    You can also perform the syntax check from the ABAP/4 Editor.
    If the problem persists, proceed as follows:
    Print out the error message (using the "Print" function)
    and make a note of the actions and input that caused the
    error.
    To resolve the problem, contact your SAP system administrator.
    You can use transaction ST22 (ABAP Dump Analysis) to view and administer
    termination messages, especially those beyond their normal deletion
    date.
    Error analysis
    The following syntax error was found in the program SAPLV61A :
    ""VBAK" has already been declared."
    How to correct the error
    Probably the only way to eliminate the error is to correct the program.
    If you cannot solve the problem yourself, please send the
    following documents to SAP:
    1. A hard copy print describing the problem.
    To obtain this, select the "Print" function on the current screen.
    2. A suitable hardcopy prinout of the system log.
    To obtain this, call the system log with Transaction SM21
    and select the "Print" function to print out the relevant
    part.
    3. If the programs are your own programs or modified SAP programs,
    supply the source code.
    To do this, you can either use the "PRINT" command in the editor or
    print the programs using the report RSINCL00.
    4. Details regarding the conditions under which the error occurred
    or which actions and input led to the error.
    Information on where terminated
    The termination occurred in the ABAP program "SAPLMEPO" in "REFRESH_TABLES".
    The main program was "RM_MEPO_GUI ".
    The termination occurred in line 35 of the source code of the (Include)
    program "MM06EF0R_REFRESH_TABLES"
    of the source code of program "MM06EF0R_REFRESH_TABLES" (when calling the
    editor 350).
    ===============================================

    Check OSS Note 133433 is exactly axplain your problems
    will resolve your problems

  • Connection handle of this Interaction has already been closed

    Dear All,
    We are facing problem in Portal application and the portal screen shows
    "WARNING : DOMG:0001 : EN: Applicatie Foutcould not create JCOClientconnection for logical system: WD_MODELDATA_DEST - Model..." When i checked the JCO and it seems to be working fine.
    This error message occurs not all the time but it happens very often nowdays in our production system.
    The trace file has the below info ....
    #1.5 #005056917DFC0065000001700000148000048ACD4C7672EF#1278514262577
    #com.sap.tc.webdynpro.modelimpl.dynamicrfc.AiiModel#sap.com/tcwddispwda#
    com.sap.tc.webdynpro.modelimpl.dynamicrfc.AiiModel.JcoClientManagementWDP#m.
    vanginhoven#10799##n/a##0fee4bb889d711dfa9cc005056917dfc#SAPEngine_Application
    Thread[impl:3]74ID\#(J2EE3880500)ID0960469550DB02703921047067447299End.
    WID1278484862289##0#0#Error##Plain###Could not create JCOClientConnection for
    logical System: *'WD_MODELDATA_DEST' *- Model: 'class com.nl.cv.pr.productlijst.
    Zorg_Arrangementproduct_Lijst_Model'. #
    #1.5 #005056917DFC002A000009B40000148000048ACD4F560780#1278514310781
    #System.err#phobos/phobos~dcrlcear#System.err#Guest#0##as-careview1_EPP_3880550##2a53432b89d711dfbb8a005056917dfc#SAPEngine_
    Application_Thread[impl:3]_38##0#0#Error##Plain###Connection handle of this
    Interaction has already been closed#
    #1.5 #005056917DFC002A000009B50000148000048ACD4F560987#1278514310781
    #System.err#phobos/phobos~dcrlcear#System.err#Guest#0##as-careview1_EPP_3880550##2a53432b89d711dfbb8a005056917dfc#SAPEngine_
    Application_Thread[impl:3]_38##0#0#Error##Plain###Connection is already closed
    and no longer associated with a managed connection#
    Do anyone have any idea on this issue? Please help me out to fix this problem
    Regards
    Raj

    Hi,
    The error message "Could not create JCOClientConnection for logical System" is only triggered when the WebDynpro application is requesting more JCO connections than the number of JCOs allocated for this application.                                                                               
    I suggest to carefully go through the documents below in order to properly configure your JCOs. If necessary, remove them and recreate in the correct way:                                                                               
    JCo Quick Summary                                                         
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/85a483cb-0d01-0010-2990-c5168f01ce8a                                                                               
    How to Configure the JCo Destination Settings                             
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3103eb90-0201-0010-71af-be6f4a6f61d1                                                                               
    You will have to calculate the maximum number of JCo connections to each application based on Models and users.
    Br,
    Javier

  • Batch has already been posted in stock **very urgent**

    Dear all,
    My user has created a delivery for excess quantities. He had to deliver only 4 where he has done the PGI for 24. I thought I would reverse it with transaction VL09, but when I click on reverse this error "Batch has already been posted in stock" pops up. What might be the reason?
    Invoice is not created against this delivery **
    Please anyone throw some light on this and also if any other options to reverse goods movement. And can I reverse only part quantity?
    Thanks in advance and its very urgent.
    Regards

    Hi,
    well actually he is doing the partial deliveries for a order and these are all backdated entries. They havent gone live yet. The order Qty was for 40 out of which he had delivered 4 earlier and when he went to do a delivery again, he saw that stock available was only for 24 qty. and he did the PGI for whole
    thats how he delivered for 24. I hope its clear now.
    Thanks for the answer. will see if changing the error to warning will work.
    this actually had come into my mind but was not sure as to what would be the impact.
    Rish.k

  • 7.1 Error: transaction type SMIN has already been included in the categoriz

    Hello Experts,
    I'm getting the following error while running a program AI_CRM_CREATE_CAT_SCHEMA:
    Error: transaction type SMIN has already been included in the categorization schema - SAP_SOLUTION_MANAGER_TEMPLATE.
    Please remove SMIN from application area of SAP_SOLUTION_MANAGER_TEMPLATE and then run this report again.
    Can you please advice how to resolve this?
    Thank you,
    123

    I invite the colleagues that if they do not have a solid answer to a question, please do not bother on answering it.   Even the guide does not say how to get rid of that error.  The guide on page 17 says "Please ensure that there is no active categorization schema for the transaction types listed above before you run the report".   Well, how do you do that?   Also the guide says to create a version of the schema, and release that new schema, but that still does not work.  You go into the new schema version to delete all entries related to SMIN, but even after that you still get the same error trying to run the report AI_CRM_CREATE_CAT_SCHEMA.
    I am writting all this because from the answers above:
    Answer 1, the SAP Note:  They do not mention anything about schema.
    Aswer 2 and 3.                 Already answered.  The implementation guide does not help as mentioned above.
    Answer 4.                        This error has nothing to do with copying SMIN into ZMIN.
    Please accept my complaint and do not get offended.  We all know we are trying to help one another, although it is nicer to save time getting to the correct answer faster.
    Thanks,
    Juan

Maybe you are looking for