Reverse Proxy and SAP NetWeaver 2004S
Dear Gurus,
I'd like to post a simple question.
I know that we can put a Reverse Proxy in front of SAP WebAS.
It can be Apache, SAP Web Dispatcher, etc.
I know we can proxypass like this:
http://reverse-proxy.abc.com/irj --> http://portal.abc.com/irj
However, is there a way so that we can proxypass like this (both AS-ABAP and AS-JAVA):
http://reverse-proxy.abc.com/xyz/irj --> http://portal.abc.com/irj
So far I've not succeeded in doing so, because the response I've got from SAP is always in the form of /irj/..... and not /xyz/irj/....
Is there any configuration in SAP to insert /xyz in front of /irj?
Many thanks in advance.
Hi Martin,
we do not have the answer yet, either.
I've read somewhere else, that it may be possible to do the proxy mapping, but we still can't change the root URI.
I believe this is what SAP calls reverse-proxy filter.
Example:
http://www.abc.com/irj/entry --> http://portal.abc.com:50000/irj/portal
So it's not really what we need.
I hope a guru from SAP will read this post and give an answer to us.
At the moment, we decide to dedicate another hostname for our portal.
regards,
Denny
Similar Messages
-
Difference Between SAP Netweaver 2004 and SAP Netweaver 2004s (7.0)
Dear All,
Could you please list out the differences between SAP Netweaver 2004 and SAP Netweaver 2004s (7.0)?
Thanks,
Rahul BhatHi Rahul,
These threads can give you some insight:
What's it gonna be: NW2004S?
NW2004 vs. NW2004s
Need help on Netweaver 2004 and Netweaver 2004s
/thread/196931 [original link is broken]
difference between 2004 and 2004s?
NetWeaver version question
Bye
Ankur -
New IBM JDK 1.4.2 for SAP NetWeaver 2004 and 2004s
In May 2006 IBM System p brand and SAP announced the direction to enhance the IBM AIX 5L JDK 1.4.2 for SAP NetWeaver 2004 and SAP NetWeaver 2004s based applications. The new IBM JDK 1.4.2 for SAP NetWeaver applications on AIX 5L is 100% upward compatible for all SAP business applications and, compared to the classical AIX JDK, provides a more consistent runtime behavior, enhances memory management, and improves debugging capabilities.
<b>General Availability (GA) of the new IBM JDK 1.4.2 for SAP NetWeaver 2004 and 2004s on AIX 5L</b>
As part of a staged release process aligned between IBM and SAP a customer pilot program was started in August 2006 followed by a Controlled Availability (CA) program. Based on positive customer feedback resulting from real production usage and the very encouraging internal test results, the new IBM JDK on AIX 5L is/will be generally available
for SAP NetWeaver 2004 SP14 and above starting at 5th of February 2007
and
for SAP NetWeaver 2004s SP06 and above starting at 30th of March 2007.
This means systems running above SAP NetWeaver releases in an AIX 5L environment are allowed to use the new IBM JDK without restrictions.
This announcement does not affect the use and support of the classical AIX JDK outside SAP environments.
<b>Transition Plan to the new IBM JDK 1.4.2 on AIX 5L</b>
SAP will support the classical and the new JDK in parallel for a limited number of NetWeaver support packages. Afterwards only the new IBM JDK will be supported:
for SAP NetWeaver 2004 the first support package only supporting the new JDK will be SP21 (planned date for SP21 see http://service.sap.com/~sapidb/011000358700001130682005E),
for SAP NetWeaver 2004s it will be SP14 (planned date for SP14 see http://service.sap.com/~sapidb/011000358700004584092005E).
So please plan a transition to the new JDK prior to the upgrade to these support packages.
SAP and IBM strongly believe that the switch to the new JDK will improve your experience with JAVA based SAP applications on AIX 5L. Both companies recommend upgrading to the new IBM JDK 1.4.2 for SAP applications running on AIX 5L as soon as it matches your companys maintenance plans.You can download the JDK directly from the sun java website...
http://java.sun.com/products/archive/j2se/1.4.2_12/index.html
I don't think Ubuntu is supported...
Regards
Juan -
Difference b/w SAP BW and SAP Netweaver BI ?
Hi Friends! could some one tell me the difference <b>between SAP BW and SAP Netweaver BI</b> ? In what way BI Netweaver 3.5 is different from SAP BW? is BW and BI are same? if there is any difference between BI and BW then what are they?
i would appricaite if some one can get me rid of from these doubts...
Thanks a lot for reading this post and hope i will get answers for my quetions.
manmitHi all,
Please let me try to clarify this discussion. "SAP BW" is the former standalone component name. We now refer to "Business Intelligence" or "BI" instead of "BW", EXCEPT when making reference to the release numbers for older versions, e.g., SAP BW 3.1 Content. Now, of course, BI is just a part of the SAP NetWeaver platform. SAP BW 3.5 is the BI component of SAP NetWeaver 2004 - we had already name the component before the merge into the platform, hence the continuing use of "BW". With the latest release, BI is simply part of SAP NetWeaver 2004s.
So, from a terminology perspective, SAP NetWeaver BI is simply an evolution from SAP BW.
If you want to know the differences between the current SAP BW 3.x releases and SAP NetWeaver 2004s, please search the SAP NetWeaver 2004s forum that was set up for BI at /community [original link is broken], which contains several threads with both a discussion of the new features and links to more information. This question has also been posted more than once to this forum! Please search the forums first before starting a new thread.
Regards,
Katie Beavers
SAP NetWeaver Product Management -
SAP NetWeaver 2004 & 2004s Trials and Previews on Windows Platform
Has anybody installed "SAP NetWeaver 2004 & 2004s Trials and Previews on Windows Platform" which is in the downloads section.
It says it supports Windows2000, & Windows XP also, but when I tried to install it on Windows XP says "prerequisite conditions not met. you need windows 2003Server or worktation etc" message. Even then I tried continuing installtion but it failed.
Also, did anyone try installing it on Windows Vista? Any luck?
Thanks,
DeepikaHi Pavan
Check this link
ftp://ftp.sap.com/pub/sdn/devkits/netweaver/abap/
Regards
Uday -
SAP NetWeaver 2004s SR 1 SP9 INSTALL
I spent last week trying to install SAP Netweaver 2004s SR 1 SP9 in XP SP2 with no success.
The JDK version is 1.4.2_09 and the install process fail in step "Import Java Dump", the <i>sapinst.log</i> indicates the error:
14-dic-2007 11:55:30 com.sap.inst.jload.Jload dbImport
GRAVE: <b>DB Error during import of J2EE_CONFIGENTRY</b>
14-dic-2007 11:55:30 com.sap.inst.jload.Jload printSQLException
GRAVE: Message: Cannot assign NULL to host variable 2. setNull() can only be used if the corresponding column is nullable. The statement is "INSERT INTO J2EE_CONFIGENTRY( CID , NAMEHASH , ISFILE , NAME , DTYPE , VBIGINT , VDOUBLE , VSTR , VBYTES , FBLOB ) VALUES ( ? , ? , ? , ? , ? , ? , ? , ? , ? , ? )".
14-dic-2007 11:55:30 com.sap.inst.jload.Jload printSQLException
GRAVE: SQLState: SAP06
14-dic-2007 11:55:30 com.sap.inst.jload.Jload printSQLException
GRAVE: ErrorCode: 1001142
14-dic-2007 11:55:31 com.sap.inst.jload.db.DBConnection disconnect
INFO: disconnected
ERROR 2007-12-14 11:55:31
CJS-30049 Execution of JLoad tool 'C:\j2sdk1.4.2_09\bin\java.exe -classpath "C:\Archivos de programa\sapinst_instdir\NW04S\SNEAK_PREVIEW\FULL\INSTALL\install\sltools\sharedlib\launcher.jar" -showversion -Xmx512m com.sap.engine.offline.OfflineToolStart com.sap.inst.jload.Jload "C:/Archivos de programa/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/install/lib/iaik_jce.jar;C:/Archivos de programa/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/install/sltools/sharedlib/jload.jar;C:/Archivos de programa/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/install/sltools/sharedlib/antlr.jar;C:/Archivos de programa/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/install/sltools/sharedlib/exception.jar;C:/Archivos de programa/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/install/sltools/sharedlib/jddi.jar;C:/Archivos de programa/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/install/sltools/sharedlib/logging.jar;C:/Archivos de programa/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/install/sltools/sharedlib/offlineconfiguration.jar;C:/Archivos de programa/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/install/sltools/sharedlib/opensqlsta.jar;C:/Archivos de programa/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/install/sltools/sharedlib/tc_sec_secstorefs.jar;C:\sapdb\programs\runtime\jar\sapdbc.jar" -sec J2E,jdbc/pool/J2E,
MX3506DC0976/sapmnt/J2E/SYS/global/security/data/SecStore.properties,
MX3506DC0976/sapmnt/J2E/SYS/global/security/data/SecStore.key -dataDir C:/Programas/SAPNW2004sJavaSP9_Trial/SAP_NetWeaver_2004s_SR_1_Installation_Master_DVD__ID__NW05SR1_IM1\../Sneak_Preview_Content\JAVA\JDMP -job "C:\Archivos de programa\sapinst_instdir\NW04S\SNEAK_PREVIEW\FULL\INSTALL\IMPORT.XML" -log jload.log' aborts with return code 1.<br>SOLUTION: Check 'jload.log' and 'C:/Archivos de programa/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/jload.java.log' for more information.
ERROR 2007-12-14 11:55:31
FCO-00011 The step importJavaDump with step key |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_Jload|ind|ind|ind|ind|9|0|importJavaDump was executed with status ERROR .
INFO 2007-12-14 11:55:38
An error occured and the user decide to stop.\n Current step "|NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_Jload|ind|ind|ind|ind|9|0|importJavaDump".
I have read many posts in many forums and there are some posts about the same problem of the table J2EE_CONFIGENTRY, but never clear answers (or answers for Linux OS). I really appreciate any help about it.
PD: No, it's not the timezone configuration (I have GMT+1 and daylight saving enabled).Hi Friends!
This is Anand Here
I am totally new to SAP
I was trying to install SAP on 2003Server
while installing the ABAP System-Central Instance
I Got this error message
An error occurred during the installation of component SAP ERP 2004 SR1>ABAP System>Oracle> Non-Unicode>Central Instance Installation. Press the log View Button to get extended error information or press OK to terminate the installation. Log Files are written to SAP ERP 2004 SR1>ABAP System>Oracle> Non-Unicode>Central Instance Installation
The following error occured and the installation could not proceed
ERROR 2007-12-27 20:33:33
- FSL-00001 System Call Failed. Error 5 (Access is denied.) in execution of system call 'FindFirstVolumeMountPoint' with parameter (
?\Volume{c682cb5b-b31d-11dc-be09-806e6f6e6963}\), line (77) in file (synxcfsmit.cpp).
ERROR 2007-12-27 20:33:33
MOS-01235 Module function getInfo of module CIa0sMount Failed,
Can Somebody help me with this -
SAP NetWeaver 2004s Java Trial Version installation problem
I am trying to install SAP NetWeaver 2004s Java Trial Version in my windows xp machine.
I have the following error.
Nothing is written in to my E:\usr\sap folder which I have share as saploc and sapmnt.
I read the forum threads on this.
I still do not know how to do this.
Please help
vijay
INFO 2006-12-17 21:23:58
Execute step getSID of component |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0.
ERROR 2006-12-17 21:24:01
FJS-00003 TypeError: dir_profile has no properties (in script NW_Java_OneHost|ind|ind|ind|ind, line 39640: ???)
ERROR 2006-12-17 21:24:01
MUT-03025 Caught ESAPinstException in Modulecall: executing JS script failed.
ERROR 2006-12-17 21:24:01
FCO-00011 The step getSID with step key |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|getSID was executed with status ERROR .Rajat,
Sorry for the delay. I was on vacation.
Which environment variable are you referring to?
JAVA_HOME is set to C:\j2sdk1.4.2_09.
I am using j2sdk1.4.2_09.
Only port changes I tried was
#sapdp01 3201/tcp.
I tried with and without the # .
Both had the same results.
I have given below the last few statememts from the sapinst log file
Any help to solve my problem will be greatly appreciated.
Thanks.
Vijay
INFO 2007-01-02 16:13:25
Execution of the command "C:\j2sdk1.4.2_09\bin\java.exe -classpath C:/DOCUME1/VIJAYV1/LOCALS1/Temp/sapinst_exe.5432.1167783061/JAR/ins-j2ee.jar com.sap.ins.j2ee.GetSystemProperty" finished with return code 0. Output: ##Tue Jan 02 16:13:25 PST 2007java.runtime.name=Java(TM) 2 Runtime Environment, Standard Editionsun.boot.library.path=C\:
j2sdk1.4.2_09
jre
binjava.vm.version=1.4.2_09-b05java.vm.vendor=Sun Microsystems Inc.java.vendor.url=http\://java.sun.com/path.separator=;java.vm.name=Java HotSpot(TM) Client VMfile.encoding.pkg=sun.iouser.country=USsun.os.patch.level=Service Pack 2java.vm.specification.name=Java Virtual Machine Specificationuser.dir=C\:
Program Files
sapinst_instdir
NW04S
SNEAK_PREVIEW
FULL
INSTALLjava.runtime.version=1.4.2_09-b05java.awt.graphicsenv=sun.awt.Win32GraphicsEnvironmentjava.endorsed.dirs=C\:
j2sdk1.4.2_09
jre
lib
endorsedos.arch=x86java.io.tmpdir=C\:
DOCUME1
VIJAYV1
LOCALS1
Temp
line.separator=\r\njava.vm.specification.vendor=Sun Microsystems Inc.user.variant=os.name=Windows XPsun.java2d.fontpath=java.library.path=C\:
j2sdk1.4.2_09
bin;.;C\:
WINDOWS
system32;C\:
WINDOWS;e\:
sapdb
programs
bin;e\:
sapdb
programs
pgm;C\:
MCC18
mpasm;C\:
MCC18
bin;C\:
MCC18
mpasm;C\:
MCC18
bin;C\:
MCC18
mpasm;C\:
MCC18
bin;f\:
oracle
product
10gDSHome
jdk
jre
bin
classic;f\:
oracle
product
10gDSHome
jdk
jre
bin;f\:
oracle
product
10gDSHome
jdk
jre
bin
client;f\:
oracle
product
10gDSHome
jlib;f\:
oracle
product
10gDSHome
bin;f\:
oracle
product
10gDSHome
jre
1.1.8
bin;f\:
oracle
product
10.1.0
Db_1
bin;f\:
oracle
product
10.1.0
Db_1
jre
1.4.2
bin
client;f\:
oracle
product
10.1.0
Db_1
jre
1.4.2
bin;C\:
WINDOWS
system32;C\:
WINDOWS;C\:
WINDOWS
System32
Wbem;C\:
Program Files
Microsoft SQL Server
80
Tools
BINN;C\:
Program Files
Microsoft SQL Server
80
Tools
Binn
;C\:
WINDOWS
Microsoft.NET
Framework
v1.1.4322;F\:
maven
Maven 1.0
bin;C\:
Program Files
QuickTime
QTSystem
;C\:
MCC18
mpasm;C\:
MCC18
bin;C\:
MCC18
mpasm;C\:
MCC18
bin;C\:
MCC18
mpasm;C\:
MCC18
bin;java.specification.name=Java Platform API Specificationjava.class.version=48.0java.util.prefs.PreferencesFactory=java.util.prefs.WindowsPreferencesFactoryos.version=5.1user.home=C\:
Documents and Settings
vijay vijayakumaruser.timezone=America/Los_Angelesjava.awt.printerjob=sun.awt.windows.WPrinterJobfile.encoding=Cp1252java.specification.version=1.4java.class.path=C\:/DOCUME1/VIJAYV1/LOCALS~1/Temp/sapinst_exe.5432.1167783061/JAR/ins-j2ee.jaruser.name=vijay vijayakumarjava.vm.specification.version=1.0java.home=C\:
j2sdk1.4.2_09
jresun.arch.data.model=32user.language=enjava.specification.vendor=Sun Microsystems Inc.awt.toolkit=sun.awt.windows.WToolkitjava.vm.info=mixed modejava.version=1.4.2_09java.ext.dirs=C\:
j2sdk1.4.2_09
jre
lib
extsun.boot.class.path=C\:
j2sdk1.4.2_09
jre
lib
rt.jar;C\:
j2sdk1.4.2_09
jre
lib
i18n.jar;C\:
j2sdk1.4.2_09
jre
lib
sunrsasign.jar;C\:
j2sdk1.4.2_09
jre
lib
jsse.jar;C\:
j2sdk1.4.2_09
jre
lib
jce.jar;C\:
j2sdk1.4.2_09
jre
lib
charsets.jar;C\:
j2sdk1.4.2_09
jre
classesjava.vendor=Sun Microsystems Inc.file.separator=
java.vendor.url.bug=http\://java.sun.com/cgi-bin/bugreport.cgisun.io.unicode.encoding=UnicodeLittlesun.cpu.endian=littlesun.cpu.isalist=pentium i486 i386
INFO 2007-01-02 16:13:25
Execute step setNWOption of component |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_getJavaHome|ind|ind|ind|ind|0|0.
INFO 2007-01-02 16:13:26
Execute step collect of component |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0.
ERROR 2007-01-02 16:13:28
FJS-00003 TypeError: this._name has no properties (in script NW_Java_OneHost|ind|ind|ind|ind, line 8987: ???)
ERROR 2007-01-02 16:13:29
FCO-00011 The step collect with step key |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|collect was executed with status ERROR . -
Initial password for SAP* in SAP NetWeaver 2004s ABAP Edition
Hello,
I have just installed the SAP NetWeaver 2004s ABAP Edition on my PC and I want to setup some new clients to simulate an ALE model.
Does anyone know the initial password for SAP* ?
I have already tried PASS and pass because I know it is case -sensitive now but it did not work.
Thanks a lot.
Wim Van den WyngaertHi,
initial SAP* password is 06071992
DDIC is 19920706 -
Error while trying to access RSA1 in SAP NETWEAVER 2004 S
HI friends,
i am working on SAP NETWEAVER 2004s and have created a few open hub destinations in this and when i tried to delete a few , system is showing an error " Destination Type is not Supported" when ever i am trying to access RSA1 .
i will be glad if you could let me know how to overcome this,
thanks and regards,
sasdihar gunturu
points will be awarded***Hi Gunturu,
Do you know what sp level are you working with ?
Here you´ll find a detail of sp level and his corrections, see the 22 page. Maybe that help you.
https://websmp207.sap-ag.de/~sapidb/011000358700004483762006E
Regards,
Natalia. -
Can I instal SAP Netweaver 2004s trial on windows vista home premium
Hi ,
Can I install SAP Netweaver 2004s trial on WIndows vista home premium. Please advise.
One more thing is I am not able to download the Trial version from the SAP's FTP site. Because ftp is blocked in our company. Is there any other site from which I can download the trial version. Please advise.
Thanks,
Sam.In this Forum it appears that Windows 2000 with SP4 will work as well (haven't tried it).
If you've got VISTA you could consider running the trial on a Virtual Machine. Parallels, and vmware offer commercial vm products for generating Virtual machines whilst Microsoft (Virtual Pc2007) and VBOX offer Free virtualisation products. Vmware also provides a FREE vmware server virtualisation product --this works fine as well although no multi-media support. However if you only need the Virtual Machine to run the Netweaver trial then that's no big deal.
As I've posted elsewhere a Win XP pro Virtual Machine using only 512MB of RAM will give quite adequate performance of the ABAP trial. Don't even THINK of the Java edition unless you've got at LEAST 2GB - even on a Virtual Machine.
Cheers
Jimbo -
SAP NetWeaver 2004s Java Trial Version on Windows Vista
Hello everyone,
I have been trying to install SAP NetWeaver 2004s Java Trial Version for three days now on Windows Vista Ultimate. Since Microsoft has a new security infrastructure implemented in Windows Vista, it is not that easy to install SAP NetWeaver 2004s Java Trial Version. Windows Vista has some sort of User-account security. In summary, in Windows Vista, you are logged in as an administrator, but when it comes to change system files or do registry entries, you or respectivly third party programs (e.g. SAP NetWeaver 2004s Java Trial Version installer) has no rights to do things like registry entries. There is a possibility to rightclick on the setup.bat file and start it in administrative mode, but that doesn't change a thing.
I hope you guys get my problem.
This is the error log:
WARNING 2007-01-28 21:09:35
Error 5 (acces denied
) in execution of a 'RegOpenKeyEx' function, line (69), with parameter (SYSTEM\CurrentControlSet\Services\DPS).
WARNING 2007-01-28 21:09:35
The Subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\DPS' does not exist on the 'localhost' host.
ERROR 2007-01-28 21:09:35
MOS-01185 The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\DPS' does not exist on the 'localhost' host.
ERROR 2007-01-28 21:09:35
FCO-00011 The step collect with step key |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|collect was executed with status ERROR .
Please help!
yours
erikWindows Vista isn't on the support matrix of SAP Netweaver 2004s!
you may play arround with regedit and chaning the security settings of SYSTEM\CurrentControlSet\Services\DPS key. SAPinst is doing a KEY_ALL_ACCESS when enumerating the services registry.
Starting with Vista some registry values have special protection which do not allow administrators to open them with KEY_ALL_ACCESS.
peter -
SAP NetWeaver 2004s Java Trial Version Installation error
Dear Techies,
I tried to install the trial version (SAP NetWeaver 2004s Java Trial Version
) downloaded from SDN, but I am getting an error immediately after started the installation. The log as given below.
Please suggest me where I can delete this special character mentioned in the log file ? The full log also is given below
INFO 2007-04-13 21:55:17
Execute step collect of component |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0.
ERROR 2007-04-13 21:55:17 [syxxcpath.cpp:58]
CSyPath::CSyPath("C:\SAP\MS2\SYS\profile\START_JC00_MythiliKannan")
FSL-02107 Path component contains reserved character ('"'): "C:
ERROR 2007-04-13 21:55:17 [syxxcpath.cpp:519]
CSyPath::CSyPath("C:\SAP\MS2\SYS\profile\START_JC00_MythiliKannan")
FSL-02106 Path contains reserved character ('"'): "C:\SAP\MS2\SYS\profile\START_JC00_MythiliKannan"
Thanks and best regards,
Shiju
Full log :
SAPinst is getting started.
Please be patient ...
starting gui server process:
sapinstport: 21200
guiport : 21212
guistart : true
command : "C:\Program Files\Java\j2re1.4.2_09/bin\javaw.exe" -cp "C:/DOCUME1/MYTHIL1/LOCALS1/Temp/sapinst_exe.2644.1176481451\jar\instgui.jar;C:/DOCUME1/MYTHIL1/LOCALS1/Temp/sapinst_exe.2644.1176481451\jar\inqmyxml.jar" -Xmx256M -Dsun.java2d.noddraw=true SDTServer config=jar:sdtserver.xml guiport=21212 sapinsthost=localhost sapinstport=21200 guistart=true
load resource pool C:\Netweaver_FullKit\SAPNW2004sJavaSP9_Trial\SAPNW2004sJavaSP9_Trial\SAP_NetWeaver_2004s_SR_1_Installation_Master_DVD__ID__NW05SR1_IM1\IM_WINDOWS_I386\resourcepool.xml
guiengine: no GUI connected; waiting for a connection on host MythiliKannan, port 21200 to continue with the installation
guiengine: login in process.
IRunModeReceiver CChoiceDialogModifier::continuePreviousRun()
INFO 2007-04-13 21:55:09 [synxcfile.cpp:493]
CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/inifile.2.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copied file 'C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/inifile.xml' to 'C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/inifile.2.xml'.
INFO 2007-04-13 21:55:09 [synxcfile.cpp:493]
CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/inifile.3.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copied file 'C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/inifile.xml' to 'C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/inifile.3.xml'.
INFO 2007-04-13 21:55:09
Execute step
Component W2K_ServicePack_Check|ind|ind|ind|ind
Preprocess of component |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|0|0|W2K_ServicePack_Check|ind|ind|ind|ind|2|0.
INFO 2007-04-13 21:55:16 [synxcfile.cpp:493]
CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/keydb.2.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copied file 'C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/keydb.xml' to 'C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/keydb.2.xml'.
INFO 2007-04-13 21:55:16
Execute step setNWOption of component |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_getJavaHome|ind|ind|ind|ind|0|0.
INFO 2007-04-13 21:55:17
Execute step collect of component |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0.
ERROR 2007-04-13 21:55:17 [syxxcpath.cpp:58]
CSyPath::CSyPath("C:\SAP\MS2\SYS\profile\START_JC00_MythiliKannan")
FSL-02107 Path component contains reserved character ('"'): "C:
ERROR 2007-04-13 21:55:17 [syxxcpath.cpp:519]
CSyPath::CSyPath("C:\SAP\MS2\SYS\profile\START_JC00_MythiliKannan")
FSL-02106 Path contains reserved character ('"'): "C:\SAP\MS2\SYS\profile\START_JC00_MythiliKannan"
ERROR 2007-04-13 21:55:17
CJSlibModule::writeError_impl()
MUT-03025 Caught ESyException in Modulecall: Bad path component: "C:.
ERROR 2007-04-13 21:55:17
FCO-00011 The step collect with step key |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|collect was executed with status ERROR .
INFO 2007-04-13 22:00:30 [iaxxgenimp.cpp:787]
showDialog()
An error occured and the user decide to stop.\n Current step "|NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|collect".
Exit status of child: 1Hi,
I changed the system name but still I am getting the same error. Previously there was an SAP system was installed in my pc later I uninstalled that, but still there are two SAPsid_00 and SAPsid_01 (where in sid is MS) is running. I think this is the problem. I disabled the services as well but still I am getting the same error during the installation. How to delete the windows services ? and how to do a clean up for registry ?. I feel if I do theses two then I can install.
Thans a lot for your helps and support.
Shiju -
SAP NetWeaver 2004s ABAP Trial Version - error code = 200
Hi all,
installation of SAP NetWeaver 2004s ABAP Trial Version
which was attached to the book ABAP-Objects ends again and again with
ProductException: (error code = 200; message="Java error"; exception = java.lang.Exception)
Attached you find information about
1) Host-file
2) Network connections
4) Error - Log
It seems that the [# [#]
echo 7/tcp
echo 7/udp
discard
9/tcp sink null
discard 9/udp sink null
systat 11/tcp users
#Active users
systat 11/tcp users #Active users
daytime 13/tcp
daytime
13/udp
qotd 17/tcp quote #Quote of the day
qotd 17/udp quote
#Quote of the day
chargen 19/tcp ttytst source #Character generator
chargen
4) == E R R OR L O G ================================================
(Jan 1, 2007 1:07:15 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err,
an error occurred and product installation failed. Look at the log file D:SAPNSPlog.txt for details.
(Jan 1, 2007 1:07:15 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err,
ProductException: (error code = 200; message="Java error"; exception = java.lang.Exception)
STACK_TRACE: 15
ProductException: (error code = 200; message="Java error"; exception = java.lang.Exception)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllInstallationSteps(StepWrapperInstallFiles.java:177)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.install(StepWrapperInstallFiles.java:268)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
(Jan 1, 2007 1:12:17 PM), Install, com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct, err,
An error occurred and product uninstallation failed. Look at the log file D:SAPNSPlog.txt for details.
(Jan 1, 2007 1:12:17 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err,
ProductException: (error code = 200; message="Java error"; exception = java.lang.Exception)
STACK_TRACE: 15
ProductException: (error code = 200; message="Java error"; exception = java.lang.Exception)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllUninstallationSteps(StepWrapperInstallFiles.java:192)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.uninstall(StepWrapperInstallFiles.java:313)
at com.installshield.product.service.product.PureJavaProductServiceImpl.uninstallProductAction(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.processActionsFailed(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
at java.lang.Thread.run(Unknown Source
== Remark to threads ========================
Thread a)
"I found it is very useful to have a clean system" => not applicable to me
Thread b)
deals with removing relics of previous installations => hints considered but error still appears
Thread c)
not applicable to meHi all
I've read your entrys.
Saw that the solution is missing.
It can be found in the manuals:
1. Download the "Registry Clean Tool for SAP NetWeaver 2004s ABAP" and use it.
2. Download the latest Version of "SAP NetWeaver 2004s ABAP" and un-rar it.
3. Install the "Microsoft Loopback Adapter" an activate it.
4. Retry to install.
Summary:
So the error 200 was caused for the first time from trying an installation without a Loopback Adapter, and after that from trying to re-install without cleaning the registry.
Now its working fine.
Thomas -
Issue with common system files for Sneak Preview SAP NetWeaver 2004
Hello,
I am trying to install Sneak Preview SAP NetWeaver 2004 and 7.0 - Full Java Edition with SAP NetWeaver Portal onto my machine.
On the third step of installation-- install common system files-- I am getting the some error messages and the installation was stopped. Can anyone kindly provide some assistance?
THANK YOU in advanced.
Errors:
INFO[E] 2007-09-10 00:18:17 [synxcuser.cpp:102]
CSyUserImpl::CSyUserImpl(const CUserData&, bool)
FSL-01027 Account user="X5DXB8C1\SAP_J2E_LocalAdmin" does not exist.
WARNING 2007-09-10 00:18:18 [ianxcreghelper.cpp:235]
CNTRegistryKey::SetACL(Registry: MACHINE\Software\SAP\J2E, ACL: (S-1-5-32-545, NONE, + | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-32-545, NONE, + | GENERIC_READ, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-32-547, NONE, + | DELETE | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-32-547, NONE, + | DELETE | GENERIC_READ | GENERIC_WRITE, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-32-544, NONE, + | DELETE | KEY_ALL_ACCESS | KEY_CREATE_LINK | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)(S-1-5-32-544, NONE, + | GENERIC_ALL, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-18, NONE, + | DELETE | KEY_ALL_ACCESS | KEY_CREATE_LINK | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)(S-1-5-18, NONE, + | GENERIC_ALL, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-21-2098403209-122039945-746205981-16905, NONE, +o | DELETE | KEY_ALL_ACCESS | KEY_CREATE_LINK | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)(S-1-3-0, NONE, + | GENERIC_ALL, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-21-3505383784-3873561528-2797080325-1008, NONE, + | DELETE | KEY_ALL_ACCESS | KEY_CREATE_LINK | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER, CONTAINER_INHERIT_ACE | OBJECT_INHERIT_ACE))
Error 1307 (This security ID may not be assigned as the owner of this object.
) in execution of a 'SetNamedSecurityInfo' function, line (633), with parameter (Error in setting security on 'MACHINE\Software\SAP\J2E' registry).
ERROR 2007-09-10 00:18:18 [ianxcreghelper.cpp:482]
CNTRegistryKey::GetStringHKeyClass(const HKEY& hKeyClass)
MUT-03001 Value of type HKeyClass has illegal value '0'.
ERROR 2007-09-10 00:18:18
CJSlibModule::writeError_impl()
MUT-03001 Value of type HKeyClass has illegal value '0'.
ERROR 2007-09-10 00:18:18 [iaxxgenimp.cpp:736]
showDialog()
FCO-00011 The step setRegistrySecurity with step key |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_System|ind|ind|ind|ind|5|0|setRegistrySecurity was executed with status ERROR .
INFO 2007-09-10 00:24:23 [iaxxgenimp.cpp:779]
showDialog()
An error occured and the user decided to rety the current step: "|NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_System|ind|ind|ind|ind|5|0|setRegistrySecurity".
INFO 2007-09-10 00:24:23
CJSlibModule::writeInfo_impl()
Setting ACL of registry entries for SAP system J2E...
INFO[E] 2007-09-10 00:24:32 [synxcuser.cpp:102]
CSyUserImpl::CSyUserImpl(const CUserData&, bool)
FSL-01027 Account user="X5DXB8C1\SAP_J2E_LocalAdmin" does not exist.
WARNING 2007-09-10 00:24:32 [ianxcreghelper.cpp:235]
CNTRegistryKey::SetACL(Registry: MACHINE\Software\SAP\J2E, ACL: (S-1-5-32-545, NONE, + | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-32-545, NONE, + | GENERIC_READ, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-32-547, NONE, + | DELETE | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-32-547, NONE, + | DELETE | GENERIC_READ | GENERIC_WRITE, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-32-544, NONE, + | DELETE | KEY_ALL_ACCESS | KEY_CREATE_LINK | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)(S-1-5-32-544, NONE, + | GENERIC_ALL, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-18, NONE, + | DELETE | KEY_ALL_ACCESS | KEY_CREATE_LINK | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)(S-1-5-18, NONE, + | GENERIC_ALL, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-21-2098403209-122039945-746205981-16905, NONE, +o | DELETE | KEY_ALL_ACCESS | KEY_CREATE_LINK | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)(S-1-3-0, NONE, + | GENERIC_ALL, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-21-3505383784-3873561528-2797080325-1008, NONE, + | DELETE | KEY_ALL_ACCESS | KEY_CREATE_LINK | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER, CONTAINER_INHERIT_ACE | OBJECT_INHERIT_ACE))
Error 1307 (This security ID may not be assigned as the owner of this object.
) in execution of a 'SetNamedSecurityInfo' function, line (633), with parameter (Error in setting security on 'MACHINE\Software\SAP\J2E' registry).
ERROR 2007-09-10 00:24:32 [ianxcreghelper.cpp:482]
CNTRegistryKey::GetStringHKeyClass(const HKEY& hKeyClass)
MUT-03001 Value of type HKeyClass has illegal value '0'.
ERROR 2007-09-10 00:24:32
CJSlibModule::writeError_impl()
MUT-03001 Value of type HKeyClass has illegal value '0'.
ERROR 2007-09-10 00:24:32 [iaxxgenimp.cpp:736]
showDialog()
FCO-00011 The step setRegistrySecurity with step key |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_System|ind|ind|ind|ind|5|0|setRegistrySecurity was executed with status ERROR .
INFO 2007-09-10 00:24:46 [iaxxgenimp.cpp:787]
showDialog()
An error occured and the user decide to stop.\n Current step "|NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_System|ind|ind|ind|ind|5|0|setRegistrySecurity".
Exit status of child: 1I am not sure if this helps, but SAP_J2E_LocalAdmin exists in my system as a group not user.
-
BEX Front end issues in sap netweaver 2004s
We have problems with accessing SAP NETWEAVER 2004S BEX tools(BI7.0).
We have the following softwares installed:
SAP_BW SAP NETWEAVER BI7.0 SP 10(SAPKW70010)
SAPGUI6.40 PATCH LEVEL 22
Microsoft office 2003
.NET version 1.1
Microsoft VJ# 1.1 Distributable package
We are having the following issues in each components:
1.BEX ANALYZER:Unable to open the reports.Getting the error message that
"Critical error occured.Program needs to be closed.Refer the trace file"
2.Report Designer:component Bex Report Designer avilable verion 59, Version 132 required.Before you can continue you have to run the front-end setup"
3.BEX WAD:Unable to save any web templates.Getting the following error message.
"E002 Error While Executing Service RSWAD_WEBPUB_CALL_SERVICE:V for object 1()"
In BI front end check tool for PC not showing any red files.But it showing Blue color for some of the microsoft dll's.
Please help us with your inputs..
thanks in advance
SoujanyaHi Soujanya,
This is known issue in BEx tools in this latest release.
We got the same problem and still facing.
We are using BEx 3.5X to access all reports.
Install BEx 3.5 too. Then you get two sub menus to access BEX tools.
Make sure that you open reports in 3.5 BEx Analyser.
I think all reports, which you tried to open in BEx(BI 7.0) are corrupted. try to copy to your datatargets/install (if they are BI Content Reports).
Good Luck,
Anand.
Pls give points if this is useful
Maybe you are looking for
-
IMessage going to wrong person
When using iMessage, if I start a conversation with my friend who is on her iPad2 (thesame as I am), sometimes the messages don't go to her, but to her son on his iPhone 3GS. It shows up as a continuing chat to my friend and if her son replies it aga
-
Using Javascript to email a form in a workflow process
I've created an Acroform which will be routed around in a workflow process. The user will open the form, add information and hit a button which is coded in javascript usng the mailDoc function. It works perfectly EXCEPT that each time the document i
-
JDK 1.6.0_18 MD2withRSA is disabled exception
Hi, Who knows what should be done to security certificates on the web-server to get rid of that exception. I am getting the exception, when trying to do SSL connection from Java to some secure web-sites using https protocol. I know that MD2 is not se
-
When I try to print an image I sometimes want it to be scaled to fit the page. I don't see these options however.
-
Has anyone seen this trim feedback behaviour?
Any time I do a trim operation, in this case a slip edit, I get these cropped trim feedback panels. It makes using them for feedback nearly impossible. I've tried resizing windows, turning of the preview monitor. Not sure what is causing this.