'Reverse Speed' causes crash

Hello,
I have a project which consists entirely of AVCHD footage from a Canon HFS10. The footage is 1080i30 (60i) and I have broken it into several sequences so I can put them together in a 'master' sequence in the order I choose. I wanted to reverse one of the sequences, so I placed the sequence into my master sequence, right-clicked on it, clicked on Speed/Duration, selected the 'Reverse Speed' checkbox, and clicked 'OK.' Every time, without fail, after 20-40 seconds, Premiere CS4 (4.2.1) stops responding and then crashes. Sometimes, I'll see a window pop up that says something about rendering the file. At least one of the times, I saw in the 'Applications' tab of Task Manager a task titled 'Droverlord' which also has a Status of 'Not Responding.' I have tried this with various sequences made from the original AVCHD footage with the same result. I rebooted the machine, and I get the same result as well. Has anybody reading this experienced this problem and if so, any advice on how I can successfully reverse a sequence?
Edit: I duplicated the sub-sequence that I was unable to reverse within my 'master' sequence. I then opened the duplicate sub-sequence and reversed the speed of the footage itself, and then was able to place that new sub-sequence into the 'master' sequence. So, it appears that it has more to do with my attempting to reverse a sub-sequence placed into another sequence, rather than simply 'Reverse Speed' not working at all in my project.
Thanks,
Matt
My system specs, if needed:
OS - Windows 7, x64, fully updated
CPU - Xeon e5440 x 2 (8 cores)
RAM - 16 Gb
Boot Drive - Velociraptor 300 Gb
Data Drive 1 - 2 TB RAID 0
Data Drive 2 - 1 TB RAID 0
Master Collection CS4 with all updates installed

kendanime
Thanks for the follow up on your issue. Did the issue resolve itself or did you do some strategic troubleshooting to correct the issue?
I ask since this one incident may be symptomatic of program problems that are currently being masked and that need to be addressed. However, as they say, do not mess with a good thing if everything is working now.
But, if the problem returns, please post again with details (answers are in the details).
Thanks. Appreciated the follow up.
ATR

Similar Messages

Reverse Speed Causing Choppy Playback

I am using CC Premiere Pro 2014 and am getting choppy playback when I reverse the footage. The footage is slow and jumpy. The footage is mp4 shot at 24 fps. I have rendered the clip and still get the same results. Using a new souped up Mac and have cleared the cache so computer isn't the issue. Any way to fix this?

System spec:
Asus x58 P6-Delux
i7-950
12GB RAM(1600Mhz)
1 System drive 500GB
1 TB (RENDER+Project)
2X1TB Raid 0 (For Footage)
Nvidia GTX 570
OS win 7 64 bit (Professional)
PrPro CS5 (5.0.3)
Media Encoder 5.0.1.0
NO Extended Desktop (1 Display)
Project Setting : DV PAL (4:3 1.097PAR) 48Khz Lower Field First
Footage :20 Min DV PAL 4:3 1.097PAR 48khz Lower Field First
All Driver are update (cheked at the manufactor website)...

Reverse speed=crash

I am using Adobe Premiere elements 11.
I am attempting the reverse a shot. So, I click "Time Stretch" and check the "Reverse speed" box.
However, once I click "ok", Elements suddenly crashes. I did this multiple times, and it still crashes.
What should I do?
Kendoanime

kendanime
Thanks for the follow up on your issue. Did the issue resolve itself or did you do some strategic troubleshooting to correct the issue?
I ask since this one incident may be symptomatic of program problems that are currently being masked and that need to be addressed. However, as they say, do not mess with a good thing if everything is working now.
But, if the problem returns, please post again with details (answers are in the details).
Thanks. Appreciated the follow up.
ATR

CC 2014 (18.1.0) | Text Field editing causing crashes (Windows)

Greetings;
I've noticed lately that when saving files from CC 2014 to a CS6 format - and having those files edited on Mac, in either CS6 or CC - when re-opening those files text fields have been causing crashes on the Windows client. When that same file is opened and text fields are edited on the Mac client, a prompt will just appear stating "Cannot Edit text" - yet it still allows it.
This has caused multiple issues for our teams as it has created files we're starting to refer to as "mine fields" - as working with the .ai file is like playing Russian roulette with text fields, you never know which one is going to crash the file.
I would love to work with a team member from Adobe to help find a resolution to the problem, and I'm willing to provide any additional details that might aid in that process.
Thanks!

Hello Pureweb,
Please upload the crashdumps on some file sharing website say Dropbox and share the link with us by sending a mail to "[email protected]". We will analyze the dump and will suggest you the workaround appropriately.
In parallel, please check that you do not have any 3rd Party plugins installed in it. Please try to remove them one-by-one and see which one causes the crashes or do reverse i.e. remove all the 3rd party plugins. Or Uninstall Ai and check at following location:
C:\Program Files\Adobe\Adobe Illustrator CC 2014
Please verify that nothing is left at above location on uninstalling Ai. Then try a fresh install and see if Ai works.
Also, verify that you have the updated Wacom drivers on your system. This might be an issue with the 3rd party program as well. One of the user who was having a similar issue reported on the Ai forum that one of the 3rd party Stahl's ImageWorx DTG RIP - a program for printing to a Direct To Garment printer was causing the issue. So, you may check if the similar thing is not happening in your case.
Regards,
Dhirendra

Premiere Pro CC Nested Sequence Reverse Speed Makes Black Footage

So... I have had this problem on three separate projects over the last few months.
2 of the projects were using video files and 1 of the projects used an image sequence. So type of footage does not appear to be an issue.
The issue is the same regardless. The issue below is happening using a DSLR 1080p30 sequence. I have tested this in other sequences such as AVCHD 1080p30 and HDV 1080P30. The issue does not occur on other 1080p30 sequences. It seems to be an issue with the DSLR sequence only.
Create a sequence-> place footage or images in that sequence -> make any needed edits, effects, etc. -> Place the first sequence into a new sequence (this sequence plays back fine) ->copy that sequence or nest the sequence from the project files list a second time -> right click->select "Speed/Duration"-> Click "Reverse Speed"-> Click ok.
This process should give you one nested sequence that plays forwards and one that plays backwards.
The issue that has happened repeatedly over the last few months is that the reversed sequence turns to black footage. If I expand the track the footage still shows up as a thumbnail. Also, the sequence maintains its time. The entire sequence turns black from start to finish.
This is possibly similar to the previous fixed multicam nested sequence issue but is new as of CC 14.2.
Any suggestions outside of not using that sequence type would be appreciated. Also, hopefully Adobe sees this and can verify if there is in fact an update issue that has caused this specific issue.

Rolling back to driver 314.22 did seem to work at first but got the same issue.
Adding footage to the timeline = working,
Add adjustment layer = stil working
add lumetri effect with a LUT = the Lut isn't applied and the image freezes
Removing the adjustment layer = pause frames are black

Photoshop CS4 and graphic cards. Can cause crashing?

Since upgrading to CS4 I seem to have increased crashing.
Here are my system specs.
Mac 2 x 2.66 GHz Dual-Core Intel Xeon
9 GB of Ram
250 GB internal dedicated scratch disc
NVDIA GeForce 7300 GT with 256 VRAM
After having endless techs look at my machine and upgrading everything. I am beginning to suspect the graphics card.
With OpenGL can a underperforming video card cause crashing in photoshop especially with massive file sizes ( multilayered CMYK poster sized files the can exceed 7 GB)?

Did you install the 11.0.1 update?
Is your OS up to date with patches?
Have you tried disabling OpenGL in preferences to avoid using the GPU/Graphics card?

AutoVue viewer caused crash while viewing .XSLX documents.

We use AutoVue Desktop Deployment Viewer incorporated in our application (using JNI). When viewing XLSX (Microsoft Excel) documents on Windows 8.1 x64 system it caused crash of application. It's reproducible only on Windows 8 (8.1 or Server2012) systems. If we set compatibility mode (Windows 7) then problem isn't reproducible.

I would recommend you log a ticket with customer support

Barn doors transition causes crash

Dear Community,
Applied barn doors transition to a project in CS4. Stored that project in 2010.
Opened the project in CS6 CC - and barn doors caused crashes - so I cleaned off the old and applied replacement barn door transitions in CS6 CC.
Once the wipe is applied - its fairly stable - sometime crashes sometimes doesn't.
If I apply a broder colour to the wipe - all ok.
If I then apply a border thickness - crash every time.
System;
Premiere Pro CS6 - 6.0.3 (001 (MC: 264587)) through cloud membership
Updated and current
Win 7 Pro - SP1 - 64 Bit
Source footage SONY EX3 - .mp4 and still image .png's
No error messages - just crash and need to restart PP CS6
Try to apply colour and border to a barn door transition causes the error
This worked before on the smae project when created in CS4
Not running other software at the time
NewBlueFX modules installed but not applied to this area of sequence
i7 - 3.20GHz, 16GB RAM, SSD OS drive, 4 x drive RAID on LSI RAID card, - No I/O hardware
I am using Are you using Mercury Playback Engine Acceleration and CUDA
Problem occurs during normal edit - as soon as I start to adjust the barn doors wipe - I don't get to compression
Thanks
Dave

Doies it help anyone that I just received this from the email address; [email protected];
Hello,
You have received this email because the content you posted below has been rejected by our moderators.
Re: Barn doors transition causes crash
posted Jun 5, 2013 5:15 PM
Since the original report earlier today - I now just have to put the timeline scrubber over the barn doors transition and PP CS6 closes without an error message and without saving. The unfortunate part here is there doesn't seem to be any record or log of the crashes to be able to disseminate whats going wrong.
Barn doors worked in CS4 - and the only change in this project is the re-opening in CS6 CC."
Question; Did I put something in there that was defammatory, rude, obnoxious, incorrect or un-helpful?
If anyone here believes I did, I sincerely apologise for the need of moderators to have intervened... and for causing any offence.

Photoshop CC Content - Aware Move Tool causes crash

Does anyone have any ideas why this is happening? Content Aware Move tool causes crash every time so far with tiff and jpegs and its getting frustrating!
I have Windows 8.1 Pro with 8GB RAM
NVIDIA GeForce GT 650M Graphics
Photoshop CC 64 bit

Thanks for the reply JJMack - I have to be honest, i'm not exactly sure what i'm looking for here!
Source
Adobe Photoshop CC 2014
Summary
Stopped working
Date
06/04/2015 09:45
Status
Report sent
Description
Faulting Application Path: C:\Program Files\Adobe\Adobe Photoshop CC 2014\Photoshop.exe
Problem signature
Problem Event Name: APPCRASH
Application Name: Photoshop.exe
Application Version: 15.2.2.310
Application Timestamp: 5480338c
Fault Module Name: FaceDetection.dll
Fault Module Version: 2.2.6.32411
Fault Module Timestamp: 52e12400
Exception Code: c0000005
Exception Offset: 000000000001704d
OS Version: 6.3.9600.2.0.0.256.48
Locale ID: 2057
Additional Information 1: e87c
Additional Information 2: e87c816cbb2acbf5e54624fc2b1f98cc
Additional Information 3: 1879
Additional Information 4: 1879b998534215d47b0a850e45784427
Extra information about the problem
Bucket ID: 2dac81db98a57fddf5997edfd40ba6eb (85993531415)

Flash CS5 has a serious speed and crash issue.

Hi,
Works PC.
Dell dual core 3.5Gb ram PC. 1 yr old
Launch time CS5 1 minute.
Opening a file is 1min 10sec, saving a file ditto, copying from lib takes 50 secs, pasting to another library 1min, replace existing item, go yes and it crashes.
Install CS5 trial on home very powerful purpose built CAD and video workstation, expect it to fly, but get same times, at least it doesnt crash first attempt but still terribly slow at everything.
Second time I try this routine it also crashes upon replace existing item.
Try saving files as CS4, they open into CS4 in seconds, wow what a difference !!!!, CS5 obviously at fault as a program, but text on buttons is a mess. so thats no good. Thats text created in CS5 not displaying when saved as CS4. Is this program in fact any good ?
File size of source file is 26Mb, of destination is 21Mb. Source has about 14 movie clips, select these and make a movieclip of them, copy/paste it to library of destination and it crashes.
Works PC reinstall Flash twice trying to resolve this, assuming its the prog, still its got these speeds and it crashes when accepting movieClip into Library. Remove the busy layer and try again and it accepts it, still damn slow. The home PC survived the busy layer paste first time round, suggesting the Office PC is at fault. But now its also crashing.
Has Flash CS5 a complexity limit ? These are map layers with many vector shapes on one of the layers, quite a few on three others. That layer seems to be the straw that breaks the camels back. Is 26Mb beyond the limit. I even upped the preferences for memory to 3000kb but no better.
I see on the forums complaints of CS5 speed on saving, users reverting to CS4. I wanted CS4 but was forced to have CS5 as it had just come out. New progs are not the best move but Adobe bully you.
The speed and crashes are prohibitive for business work, 3 days trying to do a mornings work.
I thought it was the PC but others are finding CS5 slow and crashing. What have we here as a prog...useless ! Adobe. you need to fix this. I would go back to CS4, I have it on home PC, but CS5 into 4 has text issues, unless the Office PC used a font not on the home one.
Envirographics

I still cant realize how this buggy piece of **** could make to the market! After I switched to Flash CS5 it became true headache working on Flash projects:
- in constantly crashes on saving, working with library, exiting;
- trying to create file with FLVPlayback throws dozens of errors with references to the classes that even do not exist in configuration folder nor in preinstalled SWC files that I HAD to reference manually;
- publishing in CS4 files that are published properly in CS5 throws tons of errors even though both reference existing classes and are for the same FP10 version.
- saving FLA for CS4 creates huge source file and compiling this file in CS4 creates SWF with 10x size (~280kb in CS5 and ~2800kb in CS4).
Even though Flash CS5 has some nice improvements in interface and ActionScrip editor which I do like, in general it is a complete DISASTER and huge TIME WASTER!

Speed Grade Crash on Launch in Windows 8.1 after December 2013 update

Speed Grade crashes on launch in Windows 8.1 after December 2013 update. Resetting the preferences did not help

Folder is Empty?
Then tried Install again and found this Log subsequently
2013-12-13 [ Build 7.2x34 / 2013-12-05 ]
Machine:   SHOOTERI7 in domain WORKGROUP
User:      User
Mode:      64-Bit
Display:   PCI\VEN_10DE&DEV_1201&SUBSYS_14603842&REV_A1
Driver:    NVIDIA GeForce GTX 560 , Version: 9.18.13.623
CPU:       Name: Intel(R) Core(TM) i7 CPU 930 @ 2.80GHz
           Model: 26, Family: 6, Stepping: 5
           Total Threads: 8
           Features: MMX SSE SSE2 SSE3 SSSE3 SSE4.1 SSE4.2 POPCNT RDTSCP
Base path: C:\Program Files\Adobe\Adobe SpeedGrade CC\
Arguments: "C:\Program Files\Adobe\Adobe SpeedGrade CC\SpeedGrade.exe"
23:12:30 [IrLog]           LogFile initialized
23:12:30 [GlobalSettings] Loading user settings from C:\Users\User\AppData\Roaming\Adobe\SpeedGrade\7.0\settings/User_Settings.xml
23:12:30 [DISystem]        Initializing DI System Application Object...
23:12:30 [DISystem]        Adobe SpeedGrade CC
23:12:30 [AMTModule]       Initializing
23:12:30 [AMTModule]       Starting background task
23:12:30 [AMTModule]       Background task running
23:12:30 [IrOS]            Resources loaded from C:\Program Files\Adobe\Adobe SpeedGrade CC\resources\Resources.irf
23:12:30 [IrOS]            Possible locales: 27 licensed, 10 effective
11:12:30 p.m. [IrOS]            Localized string table en_GB not present or corrupted, using fallback
11:12:30 p.m. [IrOS]            Localized string table en_US loaded successfully
11:12:30 p.m. [OpenGL]          Initializing OpenGL...
11:12:30 p.m. [OpenGL]          Vendor: NVIDIA Corporation
11:12:30 p.m. [OpenGL]          Renderer: GeForce GTX 560/PCIe/SSE2
11:12:30 p.m. [OpenGL]          Version: 4.2.0
11:12:30 p.m. [SDIOut]          SDI output is not available
11:12:30 p.m. [SoundSubsystem] Successfully initialized sound subsystem.
11:12:30 p.m. [SoundSubsystem] 3 Sound driver(s) available
11:12:30 p.m. [PlaybackEngine] Cache Setup (RAM)
11:12:30 p.m. [PlaybackEngine]    Physical 24567MB
11:12:30 p.m. [PlaybackEngine]    Available 22108MB
11:12:30 p.m. [PlaybackEngine]    Cache:    12283MB
11:12:31 p.m. [AMTModule]       Entering idle state

HT5704 Hi, Two recent updates for my iPhone have caused crashes (down the white lead via iTunes).I have "fixed" but not sure of the cause?

Hi,
Two recent updates for my iPhone have caused crashes (down the white lead) via iTunes.
I have "fixed" but I don't know the cause?
Each time the update does n't complete.
The download does n't happen.
The computer & internet connection are good.
It is as if the Apple server does n't complete?
The phone stays in recovery mode, until you reset and rebuild in iTunes.
All software is up to date, but I can't find the cause
ANY IDEAS?
Regards,
P.
<Email Edited by Host>

No error messages.
It just fails to complete the download, so recovery mode is the next step.
This can be over a period of eight hours or more!
I have so many (original) Apple USB leads that I would n't know if I have been using the same one (if it was faulty).
Does this sound like a "common" problem?

Why Does 3D Reposse cause crashes and work so slow?

Why Does 3D Reposse cause crashes and work so slow? I get the pinwheel of death when I use this feature. It works at a snails pace. I liked the 3D Type effects in iIllustrator. Why couldn't Adobe have added all the Reposse features to Illustrator instead of craming all these new features into Photoshop?
They're worthless if the program needs an hour to process every selection.

What are your OS specs, your Video Card and your Preferences > Performance settings?
Why Does 3D Reposse cause crashes and work so slow?
My guess would be because it has to create a whole bunch of polygons and your computer-set-up may be insufficient for the task.

Firefox causes crash when using Youtube explorer does not have the same effect

firefox causes crash when using Youtube explorer does not have the same effect

Troubleshooting extensions and themes
* https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
Check and tell if its working.

Access violation (0xC0000005) cause crash

Access violation (0xC0000005) cause crash. The crash report is as blow. It may be caused by the function IMAQ FillHole. How this function crash?
Who knows why? Thank you!
#Date: 2014年8月12日 14:21:51
#OSName: Windows 7 Ultimate
#OSVers: 6.1
#OSBuild: 7600
#AppName:
#Version: 12.0 32-bit
#AppKind: AppLib
#AppModDate: 08/12/2014 06:17 GMT
#LabVIEW Base Address: 0x30000000
<LVExec>
{"a":[
"vi": "D\\VISION_SYSTEM\\build\\MyProgram.exe\\IMAQ FillHole",
"ctx": "主应用程序实例",
"type": "subVI"
"vi": "D\\VISION_SYSTEM\\build\\MyProgram.exe\\ccd2表面2二值化.vi",
"ctx": "主应用程序实例",
"type": "subVI"
</LVExec>
<DEBUG_OUTPUT>
2014/8/12 16:48:15.894
Crash 0x0: Crash caught by NIER
File Unknown(0) : Crash 0x0: Crash caught by NIER
minidump id: 6e35643f-8ff2-49e6-bbde-98bac2ffa48a
ExceptionCode: 0xC0000005$N
</DEBUG_OUTPUT>
0x307277B4 - lvrt <unknown> + 0
0x30727B38 - lvrt <unknown> + 0
0x7C37FDB4 - MSVCR71 <unknown> + 0
0x77CA5A74 - ntdll <unknown> + 0
0x77C8B3C8 - ntdll <unknown> + 0
0x00000000 - <unknown> <unknown> + 0
Solved!
Go to Solution.
Attachments:
ccd2表面2二值化.vi ‏21 KB

Hi,
please stick with your original thread! Don't create double posts!
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

'Reverse Speed' causes crash

Similar Messages

Maybe you are looking for