Reverse Stock In Transit

Hello all,
Case is
In PO qty = 5.008 KG
Delivery = 5.00 KG
PGI = 5.00 KG
When doing GR in receiving plant: Error for Qty Exceeded by xxx KG
In MB5T qty = 5.008 KG
Now i want to reverse the PGI
When I reverse the PGI [641 Mvt] thru VL09, i get error message
Deificit of PL Stock in Transit 0.013 KG ....
How I can transfer deficit qty 0.013 in Stock in transit so that i can reverse the PGI?
Thanks

Hello ,
Jurgen explained is correct, But if want to reverse the stock in Transit material
Case is
In PO qty = 5.008 KG
Delivery = 5.00 KG
PGI = 5.00 KG
When doing GR in receiving plant: Error for Qty Exceeded by xxx KG
In MB5T qty = 5.008 KG
Now i want to reverse the PGI.
If you have issue the material from supplying plant means then stock is showing in stock in transit. System will not allow you reverse the stock in transite by normal movment type.
Std SAP has given reverse the "stock in transite" material from Stock in transite position through movement type 557.
Using movement type 557, you can correct purchase-order-independent stock in transit if
-   a good receipt cannot be posted to a purchase order without  stock in transit, even though there is still stock in transit
    according to the purchase order history
-   stock in transit still exists, even though there are no open  stock transfer orders for the particular material.
Regards
Mahesh Naik.

Similar Messages

  • How to reduce interplant stock in transit without cancelling delivery doc?

    Hi guys,
    We are having one problem..
    We have archived old material doucments..MM_MATBEL
    But later we found that some of the interplant deliveries are open..i.e. we have not inwareded the material in receving plant..
    Now it is not possible to cancel the delivery as the material documents are already archived and deleted..
    Kindly suggest anyone how to reverse stock in transit of receving plant...Any transaction or any special movement types??
    Because we can not reload the archive data in production system..
    regards,
    sundar....

    Hi
    You cannot reverse the documents , the best way is to take the receipt of the same & then adjust the book inventories by doing the reversal Process by creating a return PO, or by transferring it directly using 301 movement.
    Thanks & Regards
    Kishore

  • Reverse the Stock in transit

    Hi all ,
    I have a material as stock in transit - long back ( using Mvt type 641).I dont have previous history for that stock ( delivery, document etc ) .So every time it is showing as Material in transit in Material master but it is not coming in MB5T . Long Back it was happened  . Now i just want to freeze the material stock without any previous document  Reference . how to proceed in SAP .
    Thanks in Advance
    Mike

    Hi,
    Please look into the movement type: 557.
    557 {Issue from stock in transit (adjustment posting)}:
         Only use this movement type (also the reversal movement type) under the following circumstances:
         Using movement type 557, you can correct purchase-order-independent stock in transit if:
         -   a good receipt cannot be posted to a purchase order without stock in transit, even though there is still stock in transit according to the purchase order history
         -   stock in transit still exists, even though there are no open stock transfer orders for the particular material
         This movement type may ONLY be used in the cases mentioned above after careful analysis, to correct stock in transit that has rounding errors.
         This movement type may not be copied.
         Note! Before using this movement type, note the following:
         -   392205 Analysis stock in transit / Correction if split valuation
    Regards,
    Narayana.

  • To clear stock in Transit - MB5T

    Hi All,
       I done a Stock Transport Order with 351 and 101 Mvt type.In MB5T i have a material with quantity w.r.t PO.
    Not possibe to cancel that GI document..Kinly clarify how to clear the stock in transit.
    Thanks and Regards
    SAP MM User

    Hi,
    At the issuing plant with 351 Mvt, you'll find the stock in MB5T as "stock in Transit" at the recieving plant.
    After making GR 101 at recieving Plant, this quantity will cleared automatically.
    Now tell me what's the issue ypu are facing?
    Once 101 is done, you can not cancel 351 material document. For that you have to reverse 101 first and the 351  reversal
    Umakanth R

  • Stock In Transit In IM (MMBE) Not Showing in WM

    Hi SAP Experts,
    The user used VLMOVE in moving the material from storage location to storage location using movement type 313. The destination storage location is in a different warehouse. In IM, it posted in the transfer storage location or stock in transit although upon checking WM it does not reflect since a Goods Issue has been posted. The application is an after sales service wherein upon creating a sales order, the material will be scanned and a returns delivery and goods receipt will be created. The posting change using VLMOVE occured during the goods receipt. After checking OMKX, the movement type 313 is not maintained and I'm unsure on how to proceed with this. I was thinking that maybe the only the IM movement was posted since in MIGO it's still reflecting the previous storage location in the WM tab. Please help me on how to proceed on this, it's currently not allowing me to reverse the material document or do the 2nd step putaway (movement type 315 in vlmove).
    Thanks,
    Vito

    Just to add, the material is not reflecting in LS24 & LS26 since it has not storage unit because of the goods issue that posted. I can only see it in MMBE.

  • Scrap stock in transit cross company

    Dear Experts,
    We are trying to do intercompany return. We created Return PO and did a reverse GI. The stock is updated to stock in tranist CC. We now want to scrap stock from Stock in transit CC . Is there any way? Please help.
    Regards,
    Beena

    you can only scrap what you can grap.
    How could you grap a material that is somewhere on the road? You have to receive it, then you can scrap.

  • Stock in transit clear

    Hi,
    I have an stock in transit quantity for IS OIL materials, they are pending from since 2004, now i want post them in to scrap account,
    Note that,the materials are having batch as 'untax' and handling type '00'
    plaese suggest me by which movement type i can clear all the stock in transit quantities.
    thanks in advance
    suri

    hi suresh,
    the scrapping material need to be posted in MB1A with MT 551,(GI Scrapping) & 552 reversal for batch split valuation TAX,  OR UNTAX, in this case it is " UNTAX", This will automatically update the account determination with handling unit "00".
    you can also mention the cost centre you need to post the scrap material
    the stock in transit materials which is pending will be posted. if at all if you have wrongly posted, then cancel the same in MBST
    BT
    Satish

  • How to make an account assignment for stock in transit inside obyc

    hi experts,
    i am sure i dont know as to what transaction type shoudl i use to allow postings to stock in transit account. please help me with step by step processes involved in it.
    best regards
    sayeed

    It is not possible to define default Acct Assgmt cat for particular plants in STO. Instead you can make it default at client level (irrespective of doc type) for particular users.
    For doing so you need to just maintain user parameter KNT with value equal to your Acct Assigmt cat. You can maintain user parameter in SU01/SU3. This means whenever this particular user run the transaction which includes act. assigmt cat will have default act assigmt cat.
    Hope it might help you somewhat.
    Cheers,
    Parag Mahajan

  • Inventory posting - stock in transit G/L account

    Hello!
    We have a unique requirement that we need to post the stock in transit inventory only if the delivery is for one particular customer (sold to party). It is our own company but not on SAP hence, on the books, an inter company transaction. All that is different in this case is the account assignment group of the customer which basically is no help in configuring OMWB (G/L account determination for inventory postings).
    The material/plants/movement types are all the same for all transactions, thereby providing us with no 'uniqueness' in this particular transaction to post these stock in transit inventories to a different G/L. I could possibly look at having another movement type if that can help but then again, how will that be valid only for a particular transaction with this customer, I am not sure...
    Can anybody provide me with a step by step instructions on how can this be achieved, if it indeed can be? Appreciate any help or posting here if anyone wants any more clarifications on the issue...
    Many thanks!

    Hi,
    As you might already know that the G/L determination happen based on Movt type and the valuation class. in your case as the movt type and the val class are same, you willl not be able to customize to post it to different account
    so for this you do 2 ways:
    1: you create a new delyvery type and a new movement type so that you can configure the account determination (OMWB).
    2. you can influence the account determination by writing a code in the user exit ZXMBCU02 here you can force the system to post it into the different G/L account.
    Hope this helps,
    Vikrama

  • Report for stock in transit datewise

    I need stock in transit datewise. Is there any report possible for that ? Which table and fields should I refer. please revert.
    Regs,
    Appie

    Hi,
    T.Code: MB5T can be used for Report for stock in transit, but date wise u can't get here. U have to develop areport or by querry u can develop a report.
    U can get date (MKPF-BUDAT) wise details by giving movement type in MSEG table u get all the details in the tables.
    Regards,
    Chinna

  • Stock in transit using purchasing cube

    Dear Friends ,
    I would like to create a key figure  Stock in transit based on My purchasing cube.
    DSO 0PUR_O02
    Cube 0PUR_C02
    Not dilivered qty. of open Purchase order is considered as stock in transit in our
    scenario.
    1) I would like to know how can we determine the open PO. According to me its simple
       open qty = PO qty - GR qty and if open qty is more then 0 then its should be considered
    open po. But in our case some time supplier give us some less qty and even we said po is
    closed. and somtime supplier give us more qty and we said po is closed.
    now please advice me how can we determine that PO is closed or not.
    regards,
    Malik

    Hi,
    You can do it, but you need to create the keyfigure, which will inclued Movement types or Process keys,
    You just see the 0TRANSSTOCK key figure in 0IC_C03 cube, which is non-cumulative keyfigure and internally having two keyfigures, so in that way first you analyze the concept behind that and do.
    Thanks
    Reddy

  • Opening Closing Stock in transit Report

    Hi,
    I have to get the ABAP development of Stock Report. Report would have following fields
    Opening Stock
    Opening Stock in Transit Quantity
    GR Quantity
    Purchase Value
    Sold Quantity
    Rejection Quantity
    Closing Quantity
    Closing Stock in Transit Quantity
    Consumption Quantity
    In Closing quantity , It should be without stock in transit quantity.
    Could you please help me to understand ,Exact Opening Stock ,Closing sock, In Transit Stock etc? How would these be calculated? from which tables all these data would come from. Thanks in advance.
    Regarda,
    Santosh

    SantoshArya wrote:
    Hi,
    >
    > I have to get the ABAP development of Stock Report. Report would have following fields
    >
    > Opening Stock
    > Opening Stock in Transit Quantity
    > GR Quantity
    > Purchase Value
    > Sold Quantity
    > Rejection Quantity
    > Closing Quantity
    > Closing Stock in Transit Quantity
    > Consumption Quantity
    >
    > In Closing quantity , It should be without stock in transit quantity.
    >
    > Could you please help me to understand ,Exact Opening Stock ,Closing sock, In Transit Stock etc? How would these be calculated? from which tables all these data would come from. Thanks in advance.
    > Regarda,
    > Santosh
    Hi,
    You can also check these standard reports before you proceed to develop a report..
    MB52 - List of Warehouse Stocks on Hand
    MB53 - Display Plant Stock Availability
    MB5B - Stocks for Posting Date
    MB5C - Pick-Up List
    MB5L - List of Stock Values: Balances
    MB5W - List of Stock Values
    MB5T - Stock in transit CC
    MC.9 - INVCO: Material Analysis Selection, Stock
    MC.A - INVCO: Material Analysis Selection, Rec/Iss
    MC.B - INVCO: Material Analysis Selection, Turnover
    You can also consider building a query report which wil also serve your purpose quickly...
    Regards
    Shiva

  • Stock in Transit

    Hi All
    Scenario
    1. Purchase order quantity 9 units
    2. GR done for 8.999 Units
    3. Stock in transit showing 0.001 units.
    4. Purchase order is still open and cannot do DC as it throws an error that quantity does not match
    5. Purchase order is still open is reports and needs to be closed.
    Please guide me on the same as to whcih Tcode and movement type can be used to settle/adjust the quantity of 0.001 units and what would be its constraints or restrictions.
    Regards,

    Hi,
    As per note no 392205 : Note 389484 makes movement types 557 and 558 available.By 557 mvt type
    excess stock in transit can be removed or  and by 558 missing stock in transit can be created.
    Now as per standard SAP The R/3 system is designed so that the stock in transit can only be posted through stock transport orders (creation during goods issue, reduction during goods receipt).
    Purchase order and material master record can have different units of measure. The purchase order is then closed when the goods issue quantity and quantity of goods received are the same in order unit. However, in the material master record, the stock in transit is managed in the base unit of measure.
    On account of system-dependent and program-internal rounding effects which cannot be avoided, the open stock in transit quantities in order unit and in base unit of measure might not balance to zero at the same time.
    I think probably this will help you in devleoping better understanding as everything is self explanatory now as per note suggested by you.
    Regards
    Ankur

  • Stock in transit report with delivery # and date included

    I need a report similar to MB5T that will also show the delivery number and goods issue date.  I couldn't find anything standard and was going to ask an ABAPer to create something.  When researching where stock in transit is stored, I keep finding that the value should be in MARC-TRAME; however, in our system that value is blank (even for a material that shows stock in transit in MB5T.)  Is this value stored in another location as well?
    Thanks in advance for your help.

    Thanks for the response.  I know that I can view the PO history by going into the individual POs, but we want something that will show all of the POs at once without having to click in each individual one.
    Thanks!

  • Seeing Stock in transit details by using MB5T by date wise

    Hi all
    Are we able to see stock in transit (T.Code: MB5T) report by date wise.
    Reagards
    Srini

    Hi,
    You will not get stock in transit details as per date in MB5T.
    Use Report MB5B and here in selection screen, input the "Selection Date" and "Non-Hierarchical Display" option and execute the report.
    And in output, view the column of "Stock in Transit"

Maybe you are looking for