Reverse Telecine with Premiere Pro

Hi All,
I had digibeta tapes that I captured at 740x486 and the client wanted us to do a reverse telecine on them which I did by creating a 24p DV timeline, dropping the video in and than outputed the timesline with the settings of Prores HQ (required), 720x480, 23.976, Progressive, DV/D1 .9091. The output definite did not look interlaced but a couple issues
a) Media Inspector the progressive flag is not appearing. It does not read the video as progressive.
b) Opening it in QT player it stated it as 720x480(654x480) and I need the display ratio to be 640x480 not 654x480.
c) Last they commented "There might be clean aperture tag, but just let them know the clap tag must be removed." which I have no idea what they are talking about here and would like some insight.
Thank you all for reading and any help is deeply appreciated here.
-john

After you get the footage to 24 frames (23.976), will the video be identified by media inspector as progressive scan?
If you have properly removed the 3:2 pulldown, it should.
But, you can trust what Premiere tells you.
Select the clip in the Project Panel and check the 'Info':
The 'p' denotes progressive scan.
note:
I don't use media inspector (I'm on pc).

Similar Messages

Unable to batch capture with Premiere Pro CC via Kona LHi

AJA's web site claims Premiere Pro CC is compatible with the Kona LHi card, but I can't get the two to work together properly. After repeated tries, I uninstalled and reinstalled everything AJA, but still no luck.
I need to batch capture DV clips from some mini-DV tapes on my Sony MVR035U tape deck. But I also need to upconvert them from 480i to 720p60 using my Kona Lhi card. I should be able to do this with Premiere Pro CC. But the PPCC Capture window won't give me any audio feedback when I select "AJA Movie Capture" in the Capture Settings pull down menu. I only get audio feedback when I enable "DV capture" but then I'm no longer able to upconvert.
Looking forward to any feedback on this issue. Been tying all day to trouble shoot this problem.
[Text formatting removed. Please type your posts here, rather than pasting.]
Message was edited by: Jim Simon

And now with CC June 2014 you can't even capture from HDV, I need to go back to Premiere CC 2013 for that....Adobe might think tape capture is over... but it isn't totally yet...

Adobe Story Script integration with Premiere Pro Doesnt allow me to embed the script

Goal: Embed an Adobe Story Script into Premiere Pro. (mac)
Method: I have a video with a verbatim transcript.
I inport the transcript into Adobe Story and save it in the proper Adobe Story File extension (.astx)
I save it to the Adobe cloud and I have also exported it to my desktop.
I launch Premiere Pro and import the video that I have transcribed.
The I try one of 3 ways to get the script to the video in PP.
The first steps are the same as below:
I go to Adobe Story and log in from within PP.
I locate the file.
I add a Scene.
I make sure the scene is the same as it is within PP
then...
1.
I drag and drop it onto the Movie file.
Nothing appears within the Embed Adobe Story Script Meta Data field.
2.
I click on Analyze and the Embed Adobe Story Script script checkbox remains greyed out (Unable to select it)
If I click Analyze then PP will analyze the script (does a decent job) but this is NOT what I want. I want to attach the verbatim script to the video which is why I have it transcribed.
3.
Right click on the movie file within PP and the contextual menu allows me to attach a script.
I locate my downloaded .astx file on my Mac and select it.
Still nothing appears within the Embed Adobe Story Metadata field.
I have worked with Anand from support who suggested I post this question here.
I dont know if there are only certain Adobe templates for which this will work (ie TV script, Film etc)
He suggested that this would most likely work only for the .mov file formats, but then discovered that it should work even for .mp4 files.
In any case - if anyone has any thoughts, ideas, or has experience with this It would be greatly appreciated.
Jon
17 Views Tags: premiere proContent tagged with premiere pro, adobe story scriptContent tagged with adobe story script, embed adobe story script into premiere proContent tagged with embed adobe story script into premiere pro
Translate

You need to ask in Adobe Story and/or http://forums.adobe.com/community/premiere/content
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

I need to reinstall my computer, how do I deal with Premiere pro and After effects?

Hello,
As my question states I need to reinstall my computer (laptop) and I'm not quite sure on how to deal with Premiere pro and After effects.
I am thinking that I need to do some sort of backup and save my projects and footage on a sepparate drive.
If I reinstall my computer, install my creative suit production premium, and move back all of my projects and footage, won't I have to re-link every single clip?
I am currently workning on several different projects and having to re-link everything is something I don't even want to think about, that would take me days if not weeks.
Another option on my mind would be to use Creative cloud. I do have the free version but I have never used it even once before and I'm not quite sure what the purpose of the cloud is and if this is a way to use it.
I have no idea how to go about this computer reinstalation without either loosing tons of work or having to re-link every single clip used.
I am videoediting only as a hobby so I have no experience working with other people and sharing projects or the like, wich is my understanding of what the cloud is for.
Any and all help would be grealty appreciated, I know this is probably really easy but ever since i got my Suit I haven't reinstalled, upgraded och changed my computer so I am just clueless as to how to go about this.
I have Creative suit production premium, I also have the free Creative cloud.
It is only Premiere pro and After effects that I am using and am worried about.
Thank you for any help.
-Lisa Kajupank
(and oh, I just notice my name - umustbejoking - I think I just wrote that cause they wouldn't let me use anything else, saying it was already taken. So nevermind that haha.)
Message was edited by: umustbejoking

If the computer's running Mac OS X, move the cursor to the very top of the computer's screen, click on Store, and choose Authorize this Computer.
If the computer's running Windows, press the Alt and S keys and choose Authorize this Computer, or click here, follow the instructions, click on Store in the menu bar, and choose Authorize this Computer.
(84620)

Is there any way to create a file compatible with Premiere Pro

Is there any way to create a file in Premiere elements that is compatible with Premiere Pro and that can be used in Premiere Pro

Consternation
The important information that I do not see mentioned nor offered by you.
1.What version of Premiere Elements are you using and on what computer operating system it is running? What version of Premiere Pro do you want to use?
The Premiere Pro Import Supported Formats seem to indicate that it will accept the Premiere Elements project.prel (project file) on Windows Only.
Adobe Premiere Pro Help | Supported file formats
This may or may not be possible depending on damaged projects or outdated elements.
2. If you want to export your Premiere Elements Timeline to a file saved to the computer hard drive and subsequently import that into your Premiere Pro version, that "should" work. You would go to the Premiere Elements Publish+Share/Computer/ and make a selection based on what the Premiere Pro Import Supported file formats are and what you need. I can help you with that. But, details first.
But, just a "beware"...when you get to Premiere Elements 11 or 12 (if that is the version involved) Publish+Share/Computer/ there are several categories, but all you see is Adobe Flash Video, MPEG, and AVCHD. The rest of the list that includes AVI and QuickTime which both need to be scrolled to all of the time to see them, not just sometimes, with the thin scroll bar to the right of the list of choices. You can export files
with AVI file extension, under Publish+Share/Computer/AVI
with MOV file extension, under Publish + Share/Computer/QuickTime
And, if you do not have QuickTime installed on your computer with Premiere Elements, you are not going to have presets for the QuickTime export.
Remember, there is more to an export than just its file extension. Know your other export properties as well.
In many cases, you can customize the export settings to suit your requirements.
Problems will exist if you are trying to go from Premiere Elements Windows to Premiere Pro Mac or vice versa.
I would be glad for the opportunity to help you with this issue, but details are needed.
Looking forward to your follow up.
Thanks.
ATR

Videos export with purple/green artifacts/splotches/flashes with Media Encoder CC but export fine with Premiere Pro CC?

I use Premiere Pro CC to edit videos, and videos render fine when I export through Premiere Pro, but when I try to use Media Encoder CC, the video exports with weird splotches of green/purple artifacts all throughout. It almost looks like the video is glitching and having a seizure of green and purple. No idea why this happens. Could anybody help me? I use Media Encoder to export bulks of videos at a time through its queue feature, which is why I prefer to use Media Encoder for video exporting.
Please and thanks.
Specs:
Motherboard: MSI® Z87-G45 Gaming [Red on Black color] 2x SLI/CrossFire
Processor: Intel® Core™ i7 4770K 3.5GHz/3.9GHz Turbo 8MB L3 Cache HD 4600
Memory: 16GB Corsair® Vengeance™ DDR3-1600 1.5V (2x8GB)
Graphics and GPGPU Accelerator: AMD R9 295x2
Power Supply: 1300W EVGA
Operating System: Microsoft Windows 7 Home Premium 64-bit

Mitch,
I was hoping that you and others might have some insight as to whether the purple and green artifacts / splotches seen in the attached screenshots (taken from 4 consecutive frames here but occurring through the entirety of the clip) could possibly have resulted from exporting video with ~ Premiere Pro CS5 or 6 ? As seen below, these splotches alternate back and forth between purple and green in every consecutive frame. I was also hoping that someone might know if this is a relatively common type of artifact and how it is caused.

We have an issue when we send a film to the media encoder it crashes about half of the time for no particular reason. Anyone else got that too with Premiere Pro CC and the new Media encoder? Thanks! bedrijfsfilm Companyfilms

We have an issue when we send a film to the media encoder it crashes about half of the time for no particular reason. Anyone else got that too with Premiere Pro CC and the new Media encoder?

We have an issue when we send a film to the media encoder it crashes about half of the time for no particular reason
Anyone else got that too with Premiere Pro CC and the new Media encoder?
Lack of detailed info makes your question impossible for anyone to answer you!
eg. ...."Doctor it hurts...anyone else got something that hurts?"

Mini DV decks to use with Premiere Pro?

I have a few questions regarding mini DV decks and Premiere Pro.
First, is there any Mini DV deck on the market right now that will actually NOT be useful with Premiere Pro?
Does anyone have a personal favorite?
Is there anything I should look out for when I'm looking for one?
I know these are very general questions, but I have no clue whatsoever, and the only way to start to get a clue is to ask. If there's anything else I should be aqskingg/looking for, please say so.

1. Not that I'm aware of.
2. Yes. Sony, SR11 in particular or Panasonic NV-DV2000.
3. Reliability, switchable between NTSC and PAL may be of interest

Using my JVC BR-DV3000E DVR with Premiere Pro CS5

I have been testing out the use of my JVC BR-DV3000E DVR (Digital Video Recorder) using a new PC running Windows 7 (64 bit) and Premiere Pro CS5. The connection is via the firewire cable supplied with the device. It worked fine on my original PC running Windows XP with Premiere Pro 1.5.1.
When I open the capture window in CS5 it shows the message "Device Offline" at the top of the capture window and all the transport controls are greyed out. I have played around with the settings but nothing seems to overcome the problem. I am trying to capture miniDV footage in SD. Has anyone come across this problem before on either the same device or similar and has anyone any suggestion on how to fil the problem please?

Try these to see if they work
SD capture http://windv.mourek.cz/ or http://www.scenalyzer.com/main.html
I do know that the demo of Scenalyzer puts a mark in the video, so don't do anything real until you pay and enter the registration code
I don't know about the other program

Using GF 680GTX 4GB with Premiere Pro CS6

I am thinking in buying the GF 680GTX 4gb to use it with Premiere Pro CS6, but I've just discovered it's not compatible as a GPU Accelerator. Is there any way I can make it work with the program? Thanks in advance!

Yes... I run one and it works fine.
How To Enable GPU Cuda in Adobe CS6 for Windows
http://forums.adobe.com/message/4552694

Adobe Audition CS5.5 with Premiere Pro CS5

Hello everybody.
I am considering downgrading from Master Collection CS5 to Adobe Production Premium CS5.5
But quite frankly it's just because of one application.
Though, i am in doubt if i'll actually going to make the downgrade.
And as you could and might have guessed it is the Adobe Audition CS5.5 Application.
Though really the whole pack has a GREAT improvement overall, I just actaully want to mix SEAMLESSLY with Premiere Pro and sound editing application (Audition).
Which leads me to my next question.
Now with Adobe Soundbooth CS5 closed off (by April 24th), and an UPGRADE for Soundbooth CS5 users to Audition CS5. Does this mean that Audition CS5.5 works SEAMLESSLY with Premiere Pro CS5?
Is there a dynamic link between the two applications? (Audition CS5.5 and Premiere Pro CS5)
AM i able to send mixes between the two? I really don't want to loose any Audio data, such as 5.1 channel mapping, volume mixing, denoising, general mixing etc.
All i really need is some good quality sound editing which works seamless, as After Effects and Premiere Pro has proved to me can be done.
Just want to know if it is possible. Or if I REALLY have to upgrade in order to get the sweet apples.
Best
Lucas

Hi _durin_
Thanks for your quick response.
But I didn't quite understand your answer.
I have seen Jason Levine's video earlier, as CS5.5 was announced and it looks natively good. I understand the mixdown attributes etc.
Please correct me if im wrong HOWEVER this workflow and settings applies still to ONLY the new CS5.5 Version?
Im currently using Master Collection CS5.
Instead of getting either the Production Premium, or Master Collection I am strongly considering updating Soundbooth CS5 to Audition CS5.5 (the option is there as i can tell by SoundBooth's website, though i get a weird error message when I click the update link...)
However I need to know, IF Audition CS5.5 works well with the PREVIOUS version (that'll be CS5 not 5.5), of Premiere Pro.
Are there an option to render the reference video, and generate a interchange session from WITHIN Premiere Pro CS5 to Audition CS5.5?
Im sorry if I either sound harsh or "willingly" misunderstanding. But I have only documentation on how the integration works between the current versions (meaning 5.5).
Im as you can guess VERY confused over the move from Adobe to make a .5 version instead of a full-fledged CS6 solution. It causes a stir, cause I then don't know much of the integration between the previous applications.
I have seen as an example that Photoshop CS5 have gotten the update to receive paintings/files made with their new touch API. So I wonder whether integrational features will be a part of the CS5 pack since, as i've mentioned, an application like Soundbooth gets replaced with Audition, with an upgrade option for the Soundbooth owners.
Im confused and hope you can help me clear my mind up, whether to upgrade or not. I will download the trial eventually, but not onto my current CS5 system since I already use this in my daily video work and want to AVOID confusion.
Best
Lucas

How can I reduce (or remove) camera shakes in a video with Premiere Pro CS5???

I want to reduce (or remove) camera shakes in a video with Premiere Pro CS5. Is there an build-in plugin I can use, or do I have to download / buy one? Thanks.

You didnt need to look very far down the page to see this...
http://forums.adobe.com/thread/619165?tstart=0

What's a good HD camera to use with Premiere Pro CS4

I've used Premiere Pro CS4 for a while now and most of the time I don't have any problems, but recently, I've been buying HD cameras, shooting some AVCHD and then having a hell of a time getting them to play nice with Premiere Pro (or WMindows Media Player... or Quicktime... or anything but their crappy bundled software that won't let me edit or anything). My girlfriend says I should give up and buy a Mac and use FCP, but I like Premiere Pro. I'm about to take another camera back to Best Buy and I'm wondering if anyone has a suggestion for the easiest camera to use with Premiere Pro.
In case you're wondering, I've bought a Canon Vixia HF10 and a Samsung HMX-H100 so far and both had every issue I can think of from codec incompatibility to aspect ratios changing to A/V sync being lost to all-out-I-don't-know-WTF-just-happend-errors. I just want a camera that's going to give me a file I can drop straight into Premiere.

Unless you want a new computer, forget about AVCHD. It requires too much muscle to edit comfortably on anything but the fastest computer.
What camera is nice, depends on your budget. Formats that are easy to edit are HDV, DVCProHD (P2) and XDCAM. In the consumer range you could look at the Canon HV40 or XH-A1s, in the prosumer range look at the Panasonic AG-HPX170, Canon XH-H1s, JVC GY-ND250 or Sony HVR Z5 or Z7 and all Sony XDCAM cameras, especially the EX1 and EX3. In the professional range look at the Sony PDW-F355 or upward.

I work with Premiere Pro on a mac and export quicktime movies to be played on pc's or mac's

I work with Premiere Pro on a mac and export quicktime movies to be played on pc's or mac's. When I export a qt from Premiere with audio it will not play on a pc only a mac. After extensive research I have narrowed down the problem to this: if you use the inspector in quicktime it looks like this
DV, 720 x 480 (640 x 480), Millions
16-bit Integer (Little Endian), Stereo (L R), 48.000 kHz
I have to run it thru AE to make it look like this....then it plays
DV, 720 x 480 (640 x 480), Millions
16-bit Integer (Big Endian), Stereo, 48.000 kHz
SOOOO the problem is the Little/Big Endian. I googled that and it looks like a file/bit structure....anyone know how/why to change it in Premiere? Because everytime I make a movie in Prem I have to drag the sequence into AE and render it there so the sounds works.....
thanks

Two questions:
1. What CODEC are you choosing when exporting on the Mac?
2. Do you have any Blackmagic hardware/software installed?
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ

Major Issues with Premiere Pro CC

I am currently having some major issues with Premiere Pro CC running on my macbook pro(specs below).
I am trying to export a 4 minute video using the vimeo 1080p export settings as I usually do, and it takes about 10 hours to export the video. On cs6, a similar project would take 5-10 minutes.
Also, the video that was exported contained a lot of clips that came out choppy and low quality.
I am currently on the phone with tech support, and they cannot seem to figure out what is wrong.
I have seen a few post about CC having issues with amd cards, but nothing has been confirmed yet.
Any help would be greatly appreciated since this job is past due due to these issues.
2011 MacBook Pro
i7 2.2
16GB Ram
256 SSD + 750GB HD
AMD Radeon HD 6750M 1GB

You neglected to specify exactly which release of PPro CC you are running. There have been 5 of them.
If you're on CC7.2 or 7.2.1, then you may be hitting the same problem discussed in one of these threads:
RGB Curves: http://forums.adobe.com/message/5929088?tstart=0#5929088
http://forums.adobe.com/message/5934916?tstart=30#5934916
http://forums.adobe.com/message/5935386?tstart=0#5935386
The first thing to try is switching Renderer to Software Only.

Reverse Telecine with Premiere Pro

Similar Messages

Maybe you are looking for