Reverse the Key for scaling

No key stroke added to constrain scaling. Scaling by dragging the corner should be a universal constraint. The addition of shift key should be to release constraint. Just plain common sense.

Wrong. Shift to constrain is a near universal standard. Shift as you drag to constrain movement. Shift as you rotate to constrain rotation angle. Shift as you shear to constrain shear to one axis. Shift as you scale to constrain to one axis or scale proportionally.
It would be counterintuitive for just one transformation to reverse the Shift-to-constrain convention, and even worse to have all transformations constrain
unless the Shift key is pressed.

Similar Messages

  • Can i install logic pro without the cd because my dvd driver of my mac doesn't work . i have the key for logic pro

    can i install logic pro without cd ? , i have the key for the logic pro but my dvd driver of my mac doesnt work ?

    Buy an external USB2 DVD/CD drive..... (Amazon's Basic model works great)
    Or..
    Borrow someone else's Mac that has a DVD drive fitted and use that via Remote Disk
    Note:
    There is no legal means of downloading available for Logic Pro 9.. unless you originally purchased it via the App Store..
    Therefore, in your case, you must install from the DVDs you have...

  • How do I find the key for my time capsule router

    How do I find the key for my time capsule router

    Hello, see if these are of any help...
    http://www.iclarified.com/entry/index.php?enid=4547
    http://manuals.info.apple.com/en/TimeCapsule_SetupGuide.pdf
    If it's the Pre-Shared Key you're looking for, open Airport Utility, under the menu item Base Station, look for Equivalent Network Password.

  • I just updated to 10.8 Mountain Lion. Now I must enter my admin password each time I attempt to access my main hard drive.  How do I reverse the need for the password.  It's a real PAIN!

    I just updated to 10.8 Mountain Lion from 10.7.5.  Now I must enter my admin password each time I attempt to access my main hard drive.  How do I reverse the need for the password?  It's a real PAIN! 

    I'd think you have a Keychain problem (Keychain storing passwords and the likes).
    When you are being asked, are you offered the checkbox, "Remember this password in my Keychain"? If so, check and see if it stops asking.

  • How to get the "Key" for Dimension in SSAS.

    Hi
    How to get the "Key" for Dimension in SSAS.
    (Below value is the PPSParameters table XML column value in PPSDatabase in SharePoint.
    Below three key values are belongs to "Dimension". I have tried to find the key but I could net get it.)
    <NewDataSet>
    <UserValues><Key>16A201A9E75128559F947D58E6D187A9</Key></UserValues>
    <UserValues><Key>7FBEA449A6ED5606973306445839619E</Key></UserValues>
    <UserValues><Key>A8F75F9720817BCD2E1DFC1C1CF1E678</Key></UserValues>
    </NewDataSet>
    Thanks & Regards
    Poomani Sankaran

    To Be Honest there is not one straight Cmdlet that atleast I have come across 
    The best way would if you have Lync monitoring server 
    Using the Lync Server 2013 Monitoring Server
    If you have the Monitoring Server role configured in your environment, and for Lync Server 2013 everyone should!, you can use information contained in the LcsCDR database to pull back the last time a user signed in.  You can run the following query* to
    pull back the user's SIP URI and their last login time:
    USE LcsCDR
    SELECT dbo.Users.UserUri, dbo.UserStatistics.LastLogInTime
    FROM dbo.UserStatistics
    JOIN dbo.Users ON dbo.Users.UserId = dbo.UserStatistics.UserId
    ORDER BY UserUri
    Which produces the following output:
    The advantage to using the Monitoring Server to obtain this data is that unlike the information contained in the rtcdyn database, the information from the LcsCDR data will persist even when the user isn't signed into Lync.
    To get approx count of users enable for Lync Server in your organisation 
    Get-CsUser -Filter {Enabled -eq $true} | MeasurE
    Please not the above command let will give you an approx number not exact 
    From the Monitoring report yet the SIP account that signed in and then from count find out how many user havent signed in this is manual task 
    Hope this is helpful 
    Please remember, if you see a post that helped you please click ;Vote As Helpful" and if it answered your question please click "Mark As Answer" Regards Edwin Anthony Joseph

  • What is the key for skinning of paging navbar in 11.1.1.7?

    Hi
    jdev 11.1.1.7
    Know we have pagination in af:table in 11.1.1.7
    what is the key for skinning for these word in table navbar:
    1-page
    2-of
    3-of in parathesis and items in paranthesis
    4-tooltip of hover on page number inputtext (go to page)
    Thanks

    Hi Timo
    Thank for your reply
    I used http://docs.oracle.com/cd/E28280_01/apirefs.1111/e15862/toc.htm this and find af_table.TIP_LAST_PAGE and others but nothing find for key mentioned in first post and when I use af_table.LABEL_NAVBAR_ROW_RANGE_KNOWN_COUNT=something in resourceBundle,I see in runtime instead of for example (1-20 of 900 Items) ,something.
    please help

  • Find the key for join between table "crhd" and "equi" for use field "answt"

    I make program for read data from table "crhd" for print  about machine report
    but I can not find the key for link join to table "equi" for print field "answt" (acquistion value)
    please help me  find the key field for join between table "crhd" and "equi" for use field "answt"
    thank you very much...

    This is how the Work Center is linked to a particular Equipment -
    Functional - In IE03 ( view Equipments) You see the Work Center of a particular Equipment.
    Technical - Go to view V_EQUI ( view of EQUI and EQUZ). Pass the Equipment number alongwith V_EQUI-PM_OBJTY = 'A' ( i,.e searching for the Object Type Work Center).  In this way u ll get the V_EQUI-GEWRK - this is the Work Center ID.
    You can pass this Work Center ID to CRHD. And you will get the Work Center text.
    CRHD-OBJTY = 'A'
    CRHD-OBJID = V_EQUI-GEWRK.
    and u ll get the CRHD-ARBPL - this is the Work Center.
    So u need to come backwards, alongwith ur CRHD-OBJTY and CRHD-OBJID , you pass the same to V_EQUI and u get the list of equipment numbers alongwith ur ANSWT(Acquisition value).
    I guess it solves ur problem.

  • Question:what is the key for it to support SAP?

    Hi, I am a new SAP member, i have a question about if i work for IT department, what will be the key for me to support ERP-SAP???
    Any experts can help me??
    Thank you so much

    Dear,
    I didnt get it....
    I am a new SAP member, i have a question about if i work for IT department, what will be the key for me to support ERP-SAP???
    You mean you are joined IT department - what's your role to support with ERP-SAP???
    Or you joined IT department as ERP power / super user???
    Anyway.. considering  _if i work for IT department, what will be the key for me to support ERP-SAP_
    You have to install Front end GUI in all user systems and configure clients (SAP clients 300, 786, sandbox etc) whichever applicable to set. Takr care and maintain the servers, network connectivity, installing the SAP supported printers and configure them in ERP to get print out etc.
    Hope this what you looking for ... if not pls. do reply.
    Regards,
    Syed Hussain.

  • I have the key for office home and business, can anyone advise how to use it to install office on mac

    I have the key for office home and business, can anyone advise how to use it to install office on mac

    Install the software. The first time you use it you will be prompted to enter your key.

  • How to get the keys for a field in the dropdown list?

    The dropdown list of payment terms on an account is unfortunately very big, containing al lot of different values, in our system and therefore very confusing for the user working with Web UI version 5.2 to pick the right one. The keys (code like e.i Z077 or ZO23) are not stated in the list available for user. Is there any way in the system to flag if the different fields should show boths the keys(codes) and the description of the values in the field as Payment terms, etc.
    In the ERP SAP Gui it is possible to activate if you want the keys should be shown in all drop down list.
    If this is not possible for all the fields at one time, what can be a solution to have the keys in the drop down lists, any suggestion will be very valuable for us.
    Kindly regards
    Camilla

    HI Joost
    No it is not that simple, that is not a solution for us. The fields are maintained i our backend system and replicated to CRM, and these fields descriptions are also printed at Order confirmations and invoices, and we do not want the keys that do not give any meaning  to be visible to customers.
    BR
    Camilla

  • How to reverse the VAT for which I have already taken the credit ?

    Hi Experts,
    In case of outside state sale, I can't take VAT credit on my purchases. In year end I have to reverse the excess VAT amount for which I have already taken the credit. Please tell me how to reverse the credit taken for VAT step by step. Its very urgent.
    Warm Regards,
    Reva
    TCS

    HI,
    with help of FI consultant you have to pass JV
    Regards
    Kailas Ugale
    Edited by: kailasugale on Feb 17, 2012 3:24 PM

  • Reversing the liability for profit centre

    Hi Experts,
    During posting of MIRO for the freight by plant 1000 , system is reversing the liability of last line item in profit center 100000 itself instead of 1100000.
    Regards,
    Anish

    Hi,
    Check whether freignt gl is defualted to profit centre in faglkeh and check profit centre assignment in material master and if any cost centre or internal order is using in the po.

  • How to reverse the Depreciation for the excess amount posted?

    Hi Gurus,
    We have uploaded the data last month from legacy system to SAP as below.
    The Fiscal year is Jan - Dec and gone live on June 28th 2009.
    Accumulated Depreciation was taken till Dec 2008.
    Ordinary Depreciation was taken from Jan 2009 to June 2009.
    But Ordinary depreciation is not up to date in SAP as the user miss out the 2 months depreciation for each Asset but this was already posted in legacy system. All the GL Balances have been uploaded as per the legacy system. Now system is taking the previous 2 months Depreciation along with the current month. If we run the Depreciation for the current month, the system will post excess amount as it includes previous 2 months Depreciation.
    Can any one kindly suggest the process to reverse the excess amount after Depreciation posted for the current month?
    Thanks much for the help.
    Early responses will be appreciated.
    Best Regards,
    JBC

    HI
    Few clarifications-
    1. you have posted two months dep in legacy , have you transferred that dep amount wth the ordinary dep transferred from jan to june?
           If yes, that means your last posted dep month is june and accordingly you have to set the last period (6) in the SPRO for asset data transfer specifications, so system will start calculating dep from the 7th period only and will not recalculate dep for last two months.Check the last posted period mentioned in SPRO.
    2.If you have uploaded wrongly your ordinary dep for current year , then that means your Asset accounting opening balance (migrated balance ) is not matching with your Trial GL upload as well, so you need to correct your asset accounting opening balances.
         For this you need to reset your company code status from 0 to blank ( tset data always allowed for asset data transfer). And then correct the values for current year ordinary dep posted from jan to june, also check the last posted dep period as above.
    3.However you may post writeup ttype 700 to adjust the excess dep posted by any reason, you can extract last two months dep posted values asset wise from legacy system if already posted, and post the writeups for the same value in current period using LSMW.
    Cheers
    Mukta

  • Can't create the key for DisallowRun

    Hello.
    I am trying to use the DisallowRun method for restricting web browsers on certain computers. I can create the disallow run *value* in HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer, and I can create a subkey (New Key #1) in
    the same key to create the values for the various browsers to restrict, but I am unable to name that subkey *DisallowRun* as the documentation that I've seen says it needs to be named. When I try to do it in the registry editor, I get an error saying the key
    cannot be renamed (although I can rename it to other names), and when I try to do it in Notepad, I get an error saying "Cannot import \\sharepath\file.reg: Error accessing the registry".
    If I change the key name, however, the import is successful (for example [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer\DisallowRun2]
     "1"="iexplore.exe").
    Any ideas why I am prevented from creating the specific key name that Microsoft says the key needs to be? Is there some other policy setting that allows/disables the ability to make this key in the first place?

    > that subkey *DisallowRun* as the documentation that I've seen says it
    > needs to be named. When I try to do it in the registry editor, I get an
    > error saying the key cannot be renamed (although I can rename it to
    I verified (on 2012R2), and I had no problem to do so. I can create
    DisallowRun, can create values, can rename and delete, all without issues.
    Do you have special security software on your computers?
    Martin
    Mal ein
    GUTES Buch über GPOs lesen?
    NO THEY ARE NOT EVIL, if you know what you are doing:
    Good or bad GPOs?
    And if IT bothers me - coke bottle design refreshment :))

  • Open_Leads fact sheet displays the "key" for Qualification Level

    Hi all,
    Adding the Open Leads fact sheet to my config...
    It actually displays the Qualification Level, but showing the KEY and not the description...
    Is there a note I need to implement to correct this?
    BP_FACTSHEET --> OPENLEADS
    Went to the context node and apparently the Lead's Qualification description is not returned.
    Anyone has noticed the same?

    >>Hi Shridar,
    >>You can define your own views under spro>CRM>Master Data>business >>Partner>buisness Partner Cockpit and Fact sheet-->Define Info blocks.
    >>Hope it helps.
    I am using CRM 5.2 and I can no longer find such menu items in SPRO:  buisness Partner Cockpit and Fact sheet-->Define Info blocks.  Do you have a t-code for it or another way of getting to it?  At some point I was actually able to get to Business partner cockpit and fact sheet.  But I am having trouble getting there.  Please advise, thanks!

Maybe you are looking for