Reverse the release the PO

HI GURUS,
PO has been released completely and Document has been outputted, but now I want to cancel the release of PO as few changes are to be made.  But the system is not allowing to cancel release. And is displaying message that DOCUMENT HAS BEEN ALREADY BEEN OUTPUTTED(function not possible).

Hi,
Please refer SAP Note 493900
12. Question :
Is it possible to cancel a release strategy when the purchase order has been printed out?
Answer :
With ME29N you cannot cancel a release strategy once the document has been
printed out. This behaviour constitutes a new design.
Regarding ME28 it has been decided to keep the old behaviour and you can
cancel the release if there is no message (no NAST record) or at least one
message which has not been printed out.
Do let me know if it helped.
Thanks
Shailesh

Similar Messages

  • Cancel the Release for PO & PR

    Hi
    Once PR or PO released and follow on documents are processed then release can not be cancelled .
    If PR is released  and Po has created  , the PR release can not be reversed .
    Similarly If PO released and GR has taken for that PO then release can not be cancelled .
    How can I achieve this ?
    Actually system allows to cancell the release even after follow on documents are processed . I obseved it in our system . Our head of Dept Released one PO and GR was taken , but afterwards he cancelled that release
    Similarly If there is two step release ( R1 and R2 ) and PO was release by both . After R2 released the PO then person  R1 should not able to change the PO or Cancel his release
    Is there any solution to restrict such situation ? Please provide complete solution
    Please help
    Edited by: Bhushan Bivalkar on Dec 15, 2009 4:25 PM
    Edited by: Bhushan Bivalkar on Dec 15, 2009 4:26 PM

    Hi,
    you can set the release status as not changeble for release indicator " Changeability of Purchasing Document During/After Release " and set the release indicator in release strategies,
    rgds

  • Cancel the Release to Accounting but not the Billing Document

    Hi Gurus,
    Is there a way to Cancel the release to accounting billing document but it will not cancel the billing document. I can't cancel the billing documen because it is already used as a reference to one of our orders.
    I hope you can help me...
    Thanks a lot!
    Mon Magallanes

    Hi,
    As per my understanding the accounting document in itself cannot be canceled. Because once the posting is done it will be reflected in the PL. If you cancel the billing document itself then the Accounting entries would be reversed.
    Thanks,
    Mukund

  • Error while releasing the Billing document

    Hi Everyone,
      Encountering an error with the description 'Balance in Transaction currency' while trying to release the Billing document from VF02 transaction, still didnt come across the right oss note that can remove this error, can any one give me a clue on this,
    Rgds,

    hi,
    We are facing similar problem, when releasing the billing document to accounting.
    Have you been able to find the solution to this problem. If so, kindly suggest the answer
    Thanks
    Dinesh

  • Is there any more word on when apple will be releasing the thunderbolt to FireWire adapter?

    Is there any new word (newer than "in July") on when Apple will be releasing the Thunderbolt to FireWire Adaptor?

    Not yet.
    Best.

  • To release the sales order credit block by Customer Group

    Hi,
    1. I want to release the sales order credit block based on the Customer Group.
    Normally we release the credit block using the t.code VKM3.
    2. When i am maintaining the credit using the FD32, under the status screen of Credit control area Tab, the field "Credit Horizon Date", when i am creating the credit limit on 17/05/08, the system will take this field by default ie 16/07/08. I have maintained as 12 months in horizon ie OVA8.
    If any one could let me know, how the system is taking this date.
    Regards
    Ravishankar M

    Hi Ravi
    Sap default horizon time is 2 month,thats why systym is taking  two months time,so if you want to change this as 12 month you can go to
    OMO1 and select S66 then change it as month you want.
    Reward if it helps you
    thanks
    Utpal

  • Reversing and Resetting the Excise Invoice No. in Sales

    Hi Gurus,
    Kindly give me solution to reverse and reset the excise invoice after billing.  The client has created manual invoice and manual excise nos. have been given for few documents and invoice has been despatched to the party.  When they are updating the same in SAP, the system shows that the excise document number already exists in the system due to which there is a mismatch in manually given number and SAP generated excise document number.  As the manual number has already been advised they want the same number to be in SAP.  Is there any possibility of resetting the SAP excise invoice number ?
    Sadashivan

    Dear Sadashivan,
       I am just going through your message and its very surprising that you are entering excise invoice number manually while creating the exise invoice. As per my understanding you CANNOT assign external (as per you manually entering excise number) number ranges for CIN objects. The reason is excise invoice number should always be in order. If you are creating excise invoice by entering manually excise invoice then this is not SAP standard procedure.
       Please check whether you are following the standard SAP functionality while creating excise invoice or not. Check whether you are using your own development?
       Regarding resetting the number range in transaction SNRO or SNUM will not solve your purpose. As excise invoice is already been updated in different tables.
    Dear Lakshmipathi,
          Kindly check this "resetting number ranges in SNUM", will give error message while creating excise invoice.
    Regards
    MBS

  • Function Module to find out the release value in contract

    Dear All,
    I have to upload the contract with new accoutn assignment without changing the existing contract. For that i have to download all the existing contract data with value.
    In that case i have some issues regarding the value.
    For example : In the system old contract is created with value 1000 and the released value as 500.
    In that case i have to uload the new contract with all the details of existing contract with value of 500 (1000-500=500).
    How can i get the value (500) and from which table.Is there any functional module to find out the release value in contract.
    Thanks and regads,
    PM
    Edited by: PM on Jan 21, 2010 8:40 AM
    Edited by: PM on Jan 22, 2010 9:48 AM

    Hi
    You need to link the table VBFA and VBAK.
    For a contract you can check all the subsequent document (which you can filter whether you want to see Order / delivery / Billing) in VBFA and then from there pick the subsequent document no. and then from VBAK you can pick the Net value of these subsequent documents, and so you will have both the values (value of Contract and value in subsequent document) and you can determine the balance value.
    Regards
    Amitesh Anand

  • I cant seem to download and install the latest iphone software update. I have tried since the release and have been unsuccessful on more than 7 occasions and lost all the data on the process. Anyone have that problem an how do I fix this problem?

    I cant seem to download and install the latest iphone software update. I have tried since the release and have been unsuccessful on more than 7 occasions and lost all the data on the process. Anyone have that problem an how do I fix this problem?

    Hi
    Thanks but I have tried doing the above - when I said 7 times I was modest, its more like 15 times.
    And I am referring to the 5.1 software update. I dont have wifi so I guess I will have to try that seeing that my husband also has the same problem - he has also tried downloading several times. It always times out en says that the connection is lost but yet there are always an internet connection and a decent signal once it stopped. Think it said error 32052 or something!
    I am disappointed because the update includes inprovement on the battery life - did you guys notice any difference?

  • How can I re-release the Customizing request

    Hi,
    Yesterday, I released a customizing request to QAS. At the QAS, I used the T-code STMS to check the import request, I could not find out it.
    But, today, I released another customizing request to QAS. I can find out it. I don't known what had happened.
    Could I re-release the CR? How to deal with this question?
    Waiting for answer, THX
    jk

    Dear all,
    Thanks for your time. The problem is still have.
    I have released the Task and Sub-task, and I checked the import queue in which there isn't the TR.
    I released a new customizing request, it can be find out the import queue.
    I think the transport routes maybe have problem at yesterday, so I want to re-transport the customizing request.
    Which method can I choose to do that?
    jk

  • Hello  Simple problem - don,t know how to solve it.  With Premiere CC when I try to do a selection (click... drag... release the click) very often it stop way before the end of the move I'm swinging the Magic Mouse. I taught that the mouse clicking was de

    Hello
    Simple problem - don,t know how to solve it.
    With Premiere CC when I try to do a selection (click... drag... release the click) very often it stop way before the end of the move I'm swinging the Magic Mouse. I taught that the mouse clicking was defective and went to get a new Magic Mouse after lots of frustration. Today, I have an edit to do it it does the SAME thing !!
    I was like ????#$%?&*(???
    Opened all the lights and taught I've trow the new mouse to the garbage and was using the defective mouse again... no !! - ??
    Actually, the bran new mouse is doing the same thing. What I understand after investigating on the motion and watching carefully my fingers !! -  is that when I click I have to keep my finger at the EXACT same place on the mouse... drag and release and it's fine. If I click by pushing on the mouse and my finder is moving of a 1/32th of a millimeter, it will release and my selection will be to redo. You can understand my frustration ! - 75$ later... same problem, but I know that if I click with about 5 pounds of pressure and trying to pass my finger through the plastic of the mouse, it you stay steady and make it !
    The problem is that scrolling is enable while clicking and it bugs.
    How to disable it ??
    Simple question - can't find the answer !

    Helllooo !?
    sorry but the Magic Mouse is just useless with the new Adobe Premiere CC and since I'm not the only one but can't find answer this is really disappointing. This mouse is just fantastic and now I have to swap from a USB mouse to the Magic Mouse every times I do some editing. My USB mouse if hurting my hand somehow and I want to got back to the Magic Mouse asap. Please - for sure there is a simple solution !
    Thanks !!

  • Forecast not released from DP to SNP on first day of the release horizon

    Dear Experts,
    We are releasing forecast from DP to SNP every week on Saturday. We also have maintained daily bucket profile to release it in days for first 180 days.
    Now the problem is occurs when the background job for DP to SNP forecast release happens on Satruday. For ex. if on Sat 31st Jan 2015, the job runs, it should release the requirements from Mon i.e 2nd Feb, but it is releasing starting from 3rd Feb and it is skipping Monday.
    If we do it manually, then it works correctly. Hence I assume the master data, period split profile is correctly maintained.
    Even the calendar has 2nd Feb as working day.
    Please let me know if any one of you has ever encountered such issue and any pointers would certainly help.
    Thanks.

    Hello,
    Maybe your program is executed using a different variant.
    In your case, considering that when you test the release manually it works ok, I would check the variant used in your job.
    Go to SM37, identify the background job that was executed on Saturday. Select the job and press Steps. You will see 1 or more programs and variants. Select the line corresponding to the release program, go to the main menu --> Goto --> Variant. Check the starting date.. it should be Feb 2nd.
    Kind Regards,
    Mariano

  • Application Insights is not recording any data from the released version of my Windows Phone app

    I released my first Windows Phone app a week ago, and Application Insights worked perfectly to collect usage data whilst in a debug build. However, the released version of the app is not returning any data at all. Is this a common problem for new apps or
    is there a problem that I need to address?
    I configured Application Insights for my app using the information on this guide - http://msdn.microsoft.com/en-us/library/dn509554.aspx
    Any ideas or help would be greatly appreciated, thanks for your help.

    Hi Bernard, thanks for your reply.
    I tested the data using a release package of the Windows Phone app deployed directly to my phone from Visual Studio and the data appeared after around 10 minutes. However, once I published the exact same package to the Windows Phone Store and started using
    the version downloaded from the store, no usage data has been uploaded even after several days of waiting.
    I am using SDK 0.7.1 and Application Insights Tools for Visual Studio v1.3.2. The app is built for WP 8.0 and running on WP 8.1.
    The instrumentation key is 757eeaff-605e-44a2-8eaa-6abf498bfcf5.
    Thanks for your time and help, I really appreciate it.
    Dan

  • Error while releasing the billing document to accounting

    Dear All,
    I need your favor to resolve the below issue:
    (System SAP SAP ECC 6.0)
    User is getting the below error message while releasing the billing document to accounting in VF02:
    This is an inter-company billing document (B. type : IV) created in company code 0151. Payer is "IC0186", verified the customer has been setup in 151.
    Corresponding invoice has been successfully posted in company code 0186. (Partner : P0151)
    User is able to post the inter-company document in 0151 using other inter- company partner (ex. IC0183). Therefore, seems that Document type can't be an issue here.
    "Consolidated companies 151 and 186 are different
    Message no. F5080
    Diagnosis
    The number of the affiliated company must be clear for the selected document type for all the line items. In this case at least two different companies or a company in connection with a business partner who does not belong to a company are stated.
    Procedure
    If you selected the correct accounts, you must enter the document with a document type that allows cross-company posting. Otherwise, please correct the entered account."
    Could anyone please suggest what can be the reason, if any configuration is missing. Any help is this regard will be highly appreciated
    Thanks in advance,
    Praveen

    Hi Murali,
    Thanks for the prompt input, however as mentioned document type can't be an issue. Since user is able to post the document (same document type) using other inter-company partner in 0151.
    Thanks,
    Praveen

  • Error while releasing the custom table

    Hi Everyone,
    Modified the User defined include files of a particular table for one of our requirements ( In the function group of the table maintenance generator ) and encountered an error while releasing the request to Quality server, the error disappeared after regenerating the table, this seem to be happening only when the user includes of a table maintenance is introduced/modified, why the release doesnt work when there is any change in the maintenance generator?,
    Rgds,

    Hi Sailatha,
    After modifying, you need to re-generate everything so that, the changes come in effect.
    Trying to release without re-generating will surely result in error.
    Regards,
    Raj

Maybe you are looking for