Reverse Transport of object from Production to either Dev / Staging

Hi All
I have to modify one object (report writer - group F030) but the problem is that the object in Production does not match with that in Dev / Staging, I just want to know whether the object in Production can be transported in Dev / Staging so that I can modify it there and transport back to Production. Our basis expert is saying this is not possible and the transport route is one way?????
Thanks
Sameer

It is not possible and your basis expert is correct. Please see if you can just change the development object to match production first and then make the changes that you now want to apply.
I haven't worked on report writer, but check if there is version management and if you can do a version compare between production and development. Find the version that matches production, activate that version and then make the changes.

Similar Messages

  • Is it possible to transport an object from Production to DEV?

    I have some queries and workbooks in Production that I would like to archive.  I have not been able to find a method to archive, so I am wondering if I can transport the queries and workbooks from Production to DEV?  I realize the queries may not execute, but so long as I can open them up and see their definitions in DEV, I will be satisfied.
    I know this sounds a little bizarre, but is it possible to transport anything from Production to DEV?
    Thanks!

    hi
    Yes. its possible but its not recom
    you can set in production system to allow changes to obj rsa1->transport connection->click 'object changeability', and look for object type , and set to changeable.
    pls refer these below posts
    transport a query backwards, from production to development
    Re: Transporting Process Chains from Production DOWN to QA and Dev
    assign points if useful.....
    Shreya

  • Transporting an Object from Development to quality and then to Production

    Hello SAP Friends
    I want to know the step by step navigation for Transporting an Object from Development to Quality and from there to production..
    Please give some detailed Navigation...

    Hi Kiran,
    use transport connection to collect the objects to request, rsa1->transprot connection.
    use infocube as starting point to collect objects, left side choose 'object type', middle frame choose 'infocube' expand 'select objects', locate/search your infocube' and 'transfer', it will go to right side.
    in right up, there are buttons, click 'mode' and choose manual, and grouping 'only necessary objects', and execute, this will collect infocube and required objects like infoobjects, infoarea, etc.
    after that change grouping 'in dataflow before' and execute, this will collect update rules, ods, infosource, transfer rules, datasource assigned etc.
    remember to assign source system, click yellow box with X icon and mark the source system.
    after that use grouping 'in dataflow afterwards' to collect query, web template, role etc.
    take a look transport docs
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3010ba90-0201-0010-2896-e58547c6757e
    http://help.sap.com/saphelp_nw2004s/helpdata/en/0b/5ee7377a98c17fe10000009b38f842/frameset.htm
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e883de94-0501-0010-7d95-de5ffa503a86
    http://help.sap.com/saphelp_nw2004s/helpdata/en/b5/1d733b73a8f706e10000000a11402f/frameset.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/57/38e1824eb711d182bf0000e829fbfe/frameset.htm
    Re: Transport Organizer---
    transport query (bex objects)
    http://help.sap.com/saphelp_nw2004s/helpdata/en/38/5ee7377a98c17fe10000009b38f842/frameset.htm
    hope this helps.
    (Courtesy AHP from Re: transport)
    Bye
    Dinesh

  • While transporting the objects from dev to q or production what are the err

    Hi all,
    While transporting the objects from one system to another what are the errors we get?
    Thanks
    Kiran Kumar

    Hi Kiran,
    The purpose of the Forums is to help people with problems, not to "fish" for answers to what appear to be interview questions. There are many ways to become educated in SAP Administration, such as training classes and help documetnation. Please choose these avenues for your questions instead of making these kind of posts in the Forums.
    Best Regards,
    Matt

  • Transporting an object from testing client to development client

    Hi,
                 This is Sekhar . My question is
      If i transported an object from development client to testing client .After transporting object to testing client i got a bug so that ABAP developer should work on that and how could i modify that bugs in testing client .Is it possible to modify in testing client? Is their any reverse transportation from testing client to development client?
    please give me reply for my question.
    Thanks & Regards
    Sekhar Rao

    Hi Ankesh,
    You said that
    "        If there is a bug then make appropriate changes in DEV and transport the object again.
            Reverse transports are not needed and such paths are not created.   "
    I am asking that my object is in TES client and i need it in my DEV client again to make appropriate changes for bugs i got.then what i had to do.
    please reply  me
    Thanks & Regards
    Sekhar

  • Transporting SLD objects from DEV to PROD

    Hi,
       I need to move My SLD objects from DEV to PROD. There is no QA. Also SLD is not common across DEV and PROD.
    Thanks!!
    Regards,
    Miten.

    Hi,
    How to handle SLD for Tranporting Dev to Quality ser
    https://service.sap.com/~sapdownload/011000358700001684302005E/HowToSLDandXI.pdf
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0fa2c490-0201-0010-61b4-df12869c4753
    Transporting XI from DEV to QA
    Transporting XI from DEV to QA
    using CMS system. in XI
    1. /people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
    2. /people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
    3. /people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms
    4. /people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi --> Overview of Transition from Dev to QA in XI
    5. /people/sravya.talanki2/blog/2005/12/20/inconsistencies-while-transporting-rfc-objects-from-dev-to-qa-150-sp12
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
    http://help.sap.com/saphelp_nw2004s/helpdata/en/93/a3a74046033913e10000000a155106/content.htm --> Transporting XI Objects
    http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content  .htm --> Configuring Groups and Transport Targets
    Look into this blog for how to export / improt IR and ID objects,
    /people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
    /people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
    Please go through these links which actualy show you how to configure CMS and also gives you all information regarding it.
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/43f5d790-0201-0010-2984-ff72d822b109
    http://help.sap.com/saphelp_nw04/helpdata/en/de/a4214174abef23e10000000a155106/content.htm
    /people/daniel.wirbser/blog/2005/10/27/tcsfilecreateexception--error-while-assembly-of-software-components-in-nwdi
    http://help.sap.com/saphelp_nw04/helpdata/en/f6/719a2172f74b67b150612a7cd3b7df/content.htm
    http://www.sap-hefte.de/download/dateien/964/074_lesesprobe.pdf
    Here are some blogs.
    /people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi
    /people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
    Re: Moving project from Dev to QA
    Error while exporting/transporting the Business system from Dev to Quality
    Transporting the scenario frm Dev Server to PRD Server
    transporting data from Dev to quality  using CMS
    Regards,
    Phani
    Reward points if Helpful

  • How to transport CU02 objects from one system to another?

    Hi,
    How to transport CU02 objects from one system (Development) to another (Quality)?

    You need to set up the object dependency IDOC in the partner profile.Message type is KNOMAS. The transaction to send is CLD2.

  • Transport Table K9RPEF1000006  from Production Server to Quality Server

    Dear Friends,
         I am performing client export/import activity and I have exported the Production Client with SAP Profile SAP_CUSX but when we checked log then It shows the table K9RPEF1000006 is available on production server but not available in quality server.So I have two queries ,( i) how can we create tranport request for this sap standard table (ii) How can we transport/move table from production client to quality client.
    Regards,
    Adya

    Hi Adya,
    You will need to create a transport manually using SE03 or SE09 ...
    R3TR TABL will transport technical settings for the table.
    R3TR TABU will transport table contents.
    Best regards,
    Derrick Hurley
    Development Workbench

  • Transport of queries from production to developement

    Hello BI Community,
    We allow ad-hoc query development in our production system. Yet certain queries are critical and must be "certified" so that they cannot be overwritten in an ad-hoc manner.
    The method for certifying a query is to transport it from the development system, and once done the only way to change this query is to move another transport.
    As more and more sophisticated queries need to be certified, it is becoming difficult to re-create those queries in the development system for the certification process.
    Does anybody have experience or recommendations around moving a query that was originally created in the production system BACKWARDS to the development system ? Then it would be easy to move forward again via transport for certification.
    Thank you !
    Kiran

    Hi Kiran,
    1. Open production system
    2. Create transport (1) in Prod, add queries, process chains, etc.
    3. Create new transport (2) in Prod (in SE01) of type "Transport of Copies"
    4. Enter your target system on this screen (choose your Dev system here!)
    5. Include objects from transport 1 into transport 2
    6. Release transport 2 to go to Dev
    7. Delete transport 1 from Prod. This release locks on the objects.
    8. Close Prod
    8. Import transport 2 into Dev system
    OR
    The reverse transport is usually not setup , what you could do is :
    1. As BASIS to set up the connection
    2. Copy the transport object into file and then import it manually into Development
    Check this thread.............also.....
    Re: Reg : Transport  req
    Regards,
    Vijay.

  • Transport planning book from Production to Dev/ Test system

    Hi APO Gurus,
    I need clarity for below mentioned point u2013
    I have a correct planning book in production system. I have a different structure in testing as well as in quality system. I want to transport planning book with all data views and macrou2019s associated with it to development system (or in test system).
    How to do this? Please elaborate with details
    Thanks in advance.

    I did the transport from Production to Dev client using TSOBJ last week. Basis team helped in connecting Prod and Dev clients.
    Everyting went ok except selection IDs. When I check 'with selection transport' in TSOBJ, it ends up in short dump saying Timed Out in reading SQL table /sapapo/sdpsetde. We increased the system profile parameter "rdisp/max_wprun_time" from 1800 seconds to 3600 seconds. It still timed out with same message. So, I created the transport without selection IDs and it worked.
    Next, I downloaded the only required selection IDs (total 498) from the DP Planning Area in Production client to excel spreadsheet using table /sapapo/TS_SELKO. Then created another transport using TSOBJ.....this time I used the 'Transport of Selections' section for Selection IDs and used single value selection from drop down, uploaded the IDs from clipboard option. That worked.
    Although my problem is solved....but by any chance, has anyone encountered that TSOBJ Timed out? Is there any OSS note for this?
    -Sachin

  • Delting Objects from production system

    Hello All,
    I need to delete some of the Infoobjects,ODS and Infocubes from my Production system.
    for e.g:
    We have Inserted infoobject ZXX as data target,so it is available under infoprovider.
    For this,we have update rules ZYYY.
    In the Infoprovider tab: I right click on the Infoobject ZXX and selected the "Remove Infoobject as data target option".So update rules and the infoobjects were removed from the Infoprovider tab.
    Also I deleted the infosource ZYYY.
    While deleting the Infoobject ZXX from the Infoobject tab,it says "the update rules ZYYY still exists and hence cannot delete the data"
    Please let me know,how can i delelt the Infoobject and the update rules.
    Any help will be appreciated.

    Hi,
    Make sure that you are having prober authorizations to delete the objects. If you have, try to log on again. Also Check for Data flow upward objects from this object.
    Edited by: P. Saravana Kumar on Apr 1, 2009 6:01 PM

  • Transport deleted objects in productive

    Hi!
    Help, plz.
    What is the right way to transport deleted objects (levels, packages...) to PROD system from QUALITY?

    Hi Marina,
    I would think the right way to transport objects would always be from DEVP (development) to PROD and not from QUALITY else after a period of time it is possible that you might have three systems DEVP, QUALITY and PROD and none of them in sync with each other.
    You use QUALITY only for testing/training purposes and not for development purpose.
    If you have accidentally deleted objects from Devp, would suggest recreating the same in Devp.
    hope it helps

  • Transport  of Object from development to quality server

    Hi Experts,
        I want to know in detail with transaction codes how to transport from development server to quality server. how to transport mappings. Thanks in advance.
    Regards,
    nagaraju tankala

    Hi,
    XI supports two kind of Transporting the objects
    1. CMS tranport
    2. File Transport
    CMS Transport
    CMS for SAP Exchange Infrastructure
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b8d8f7b2-0701-0010-b09a-cda4cca2c98e
    Configuration of CMS in Central NWDI & SLD to transport XI objects
    /people/praveen.mayalur/blog/2007/05/31/configuration-of-cms-in-central-nwdi-sld-to-transport-xi-objects
    How to Use CMS in XI 3.0.pdf
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/43f5d790-0201-0010-2984-ff72d822b109
    CMS based transport in XI
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b8d8f7b2-0701-0010-b09a-cda4cca2c98e
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
    Change and Transport Lists for CMS Transports
    How To…Transport XI Content Using CMS
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f85ff411-0d01-0010-0096-ba14e5db6306
    File Transport
    There is not much to do if you're using file transport
    IR you just export (from the menu) and import the same way in the target IR
    ID you just have to specify transport targets
    (so names of your business systems will change)
    Configuring Groups and Transport Targets.
    http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content.htm
    also have a look at:
    Transporting XI Objects
    http://help.sap.com/saphelp_nw04/helpdata/en/93/a3a74046033913e10000000a155106/content.htm
    if you're having one SLD if not then you should also copy sld so that all sld's data will be consistent
    Thanks
    Swarup

  • OBJECT SKIPPED while transporting the objects from DEV to QA.

    Hi All,
    While transporting the objects to Quality, I'm getting a warning saying Objects are skipped.
    Can anyone please explain how to get rid of this error? We are facing this issue almost for all the transports which we are moving and the objects do not get transported to the next environment. We have to ask BASIS to use overwrite functionality while transporting to fix this each and every time we face an error.
    If any SAP notes are available then please share it to me.
    Thanks in Advance.

    Hi Srikanth,
    Objects of the selected object types exist in your system as changeable even if this system is globally set to not changeable. As a result, these objects are no longer connected to the transport system. 
    check here........
    http://help.sap.com/saphelp_nw04/helpdata/en/0e/a7343e8c7f6329e10000000a114084/content.htm
    for this try contact basis team.
    Thanks,
    Vijay.

  • How we transport developed objects from development server to qualityserver

    Hi All,
      pls send me navigational steps for transporting the objects.

    Hi,
    In transport connection in RSA1, you can capture the objects in various transport request's. Once you capture all the necessary objects, you can release these requests in SE09.
    The sequence and logical grouping of the objects to be captured as follow...
    Sequence No Objects in Request
    1 Package(DEVC), InfoArea(AREA), Application Component(APCO)
    2 Keyfigure Catalog(IOBC), Keyfigures(IOBJ), Units(IOBJ)
    3 Characteristic Catalog(IOBC), Characteristic Infoobjects(IOBJ)
    4 Infosources (ISCS, ISTD, ISMP, ISTS, ISFS, ROUT) and Generic Data Sources(DataSource Active Version(OSOA), ISMP, ISTS,DataSource Replica( ISFS)  and Tables(TABL))
    5 Infoproviders(ODS(ODSO), Cube(CUBE), Infoset(ISET))
    6 Update Rules(UPDR, ROUT)
    7 Infopackages(ISIP)
    8 Queries(ELEM)
    9 Webtemplates(TMPL, BLTM, BPTM)
    Regards,
    Yogesh

Maybe you are looking for