Reverse transport request!!
Is it possible to backout/reverse or undo a SAP transport (change request) in the STMS / transport system?
regards
gunjan
Hi,
Just a thought. Can we not reimport the older version , i.e import transport request of the previous version, using STMS in the target system? This might probably overwrite the new code with old one!
Rgds,
HR
Message was edited by: Hema Rao
Similar Messages
-
How to reverse Transport requests from sand box to development client
Dear all,
I am doing some testing on Sand box, I made some transport requests from development to sandbox, which effected some settings in sandbox.
Now I want to reverse those transport request from sand box to development, unfortunately I didn't make any note of transport requests which I transported from Development to Sandbox.
Please educate me how to reverse transport requests from sand box to development.
your suggestions are highly appreciated
thank you
Venu GopalThere is no reverse, you have to create a new transport with the original settings.
Programs keep track of their versions and are easier to pull a previous version, configuration can be tougher, open all the folders in SE10 to see if you can determine the configuration changes. -
How to reverse transport request
Hi Experts,
We transported some changes from quality to development. Now we realized that, we dont want those changes in Development.
Plz suggest me, Is there any procedure to reverse this transport request?
Thanx in advance.
Rgds,
RamHi Reddy,
You can't Reverse transport request.
But there is a work around to get back your old changes or format.
For EX: if you have transported any infoobject or any cube .. there is a chance of getting back the old changes through the Version comparison.
http://help.sap.com/saphelp_nw70/helpdata/en/a9/7e2ae837e511d5b3bf0050dae02d7c/content.htm
Hope this Link helps you verymuch...
In the above it has clearly been mentioned on Version management.
Regards,
Ravi Kanth -
Reversing transport request (Changes)
I have made changes to a program and transported to quality. Test has failed. How can i reverse all the changes in one go. Is there way to reverse the TR.
ThanksHi,
until yet reverse transports are not provided by SAP.
Sometime it is much manual work getting back to previous state.
You have to retrieve old version for each software component in the development system. For SAP Script there is no versioning at all!
Sometimes I prepare a reverse transport to face problems going live.
Additionally we built up a transport way from SAP live system to our development system. So we can bring systems in front of the live system closer to it. This is a good deal especially for the development system, which normally will not be renewed.
regards
Walter Habich -
Error in Transport Request PRD to Test application
Dear all,
We are in process of doing reverse transport from PRD to TEST system. i have opened the PRD system and collected the objects in TR and once again done the transport of copies in PRD system
after transport of copies, i tried to import the TR in TEST transport queue. once i tried to import the same i got the below error.
Please advise what needs to be done. Any help would be appreciable.
Transport control program tp ended with error code 0247
Message no. XT200
Diagnosis
An error occurred when executing a tp command.
Command: ADDTOBUFFER PBWK900028 TBW pf=/usr/sap/trans/bin/T
Return code: 0247
Error text: addtobuffer has problems with data- and/or cofile
Request: PBWK900028
System Response
The function terminates.
Procedure
Correct the error and execute the command again if necessary.
regards,
mohankumar.GHi,
when creating Transport Requests in the Production system the requests are created as local requests that can't be transported between systems, and when the Transport Request is released the Data and Cofiles are not created.
You need to change the client settings with Tx SCC4 to allow the creation of Transport Requests.
You need to create a Temporary Transport Layer and Temporary Transport Route from Production to Test System. When you create the Transport Request make sure the transport request is using this newly created transport layer and has a target system.(Package also) when you release this request, the data and cofiles will be created. The transport request should also appear in the import queue of the Test system.
Satish.K -
Clubing transport requests together
Hi Experts,
We are in a peculiar situation.
I have one workbench transport request (already released & moved to R/3 test environment)
I have one customizing transport request (which I will create) in R/3 DEV environment.
Is there any way I can club these two requests together to form a single transport request which I can push in Prod.
Any thoughts will be most welcomed & rewarded with points.
Thanx in advance.
ASJHi ASJ:
I am sorry, I tried the reverse (I merged Customizing Request with Workbench request). When I tried to merge WOrkbench with Cust, I got the error that you said. Maybe you can see if its possible to use the other way.
Release your Customizing Request.
Create a new Workbench Request.
Merge the old released Workbench Request into new one.
THen, again, merge the Customizing Request to new one.
THen, you will be good to go.
Ram Chamarthy -
Deleting objects in transport request
Hello,
I made the changes in InfoCube in developer system and included those changes in a transport request. I didn't release this transport. Then I realized that those changes must be reverted.
I know what I have to do. First of all I need to change manually InfoCube and then remove objects from transport request.
I have doubt about deleting objects. In transport request there is a lot of object which Iu2019ve never changed such as InfoObjects and InfoArea.
Can I safely remove these objects? Why these objects are attached to my transport request?
I checked them and last change was made by another user.
Thank you for your time.Hi,
I don't think there is any version comparison available with target system like R/3 reports. You will manually have to compare the properties.
If you have lot of objects and do not want to loose any changes then you can even think of reverse transport from production system to development system for selected objects.
Now about locking the remaining objects you can open the TR through SE09 in change mode and then select the required items and from the tool bar you can directly lock all the items in single go.
Regards,
Durgesh. -
How to Undo Transport Request release
Hi Gurus,
I ve done a setting in Development server and gone to SE09. I released a Transport Request by mistake. I should not have done that. I want to use the same request for some other settings. How to undo it. I hope I can undo it as I have not transported to Quality server by SMTS yet.
Thanks in advanceNo u can not reverse / delete the transport request. U can change its desciption to not to be transported.
I suggest u to create the opposite request & release that -
Change Transport Request of a OSS Note
Hi,
We have implemented 10 OSS notes in one of our environements and saved all the notes in a single Transport Request. But we need to change Transport Request for 5 of these notes.
Can anyone suggest the best way to change the transport request of a OSS Note, which should change the transport request of objects that are part of manual corrections as well?
Thanks,
PhaniI understand the other 5 notes are required as well, just in a different transport request. Assuming that some are complex fixes touching many objects and might even be dependent on each other, maybe the safest way would be to reverse all 10 as described (in reverse order as they have been applied, last in first out), delete the transport request, then apply them again using the desired transport requests.
Manual steps need special attention, as always.
Thomas -
Unable to capture the Data Source into a Transport Request
Hi All,
We have a product hierarchy and we are using the data source :4R_PRODH_D_LGEN_HIER for the hierarchy.
Now we need to transport this structure to the quality environment but we were not able to capture the datasource:4R_PRODH_D_LGEN_HIER into a transport request.
When ever we activate the data source:4R_PRODH_D_LGEN_HIER it is asking for the Package and the Transport Request Number.If we give these details and save it, data source is not getting captured in the request, only the "bject Directory Entry" is getting captured.
Can someone please guide me on how to capture the datasource under "Data Sources in BW" in a transport request.
Regards,
Sachin Dehey.Hi Sachin,
Hierarachy datasource is not captured as Attributes and Text Datasource. So what ever you have done is correct.
What ever is captured in Object Directory Entry is correct. So go ahead with your transports, once transport is done check the Hierarchy Infopackage with Available OLTP hierarchies and load the data.
Most important thing first see that the all Master & Transactional Datasources are transported in R/3 Dev to QA to PRD
In BW, datasources are not transported, only their replica is transported.
Transportation of Datasource is done in R/3. Only their replica is transported in BW.
So wht ever you have done till now is correct. So go ahead.
While attaching Hierarchy Datasource it is captured only in "Object Directory Entry"
Regards,
Vishnu. -
Error while assigning objects to Transport Request
Hi All,
while assigning a Transfromation to a Treq i am getting an error saying
Object '7KU37C7IG3T7AQ5NHSLEZVC91' (ROUT) of type 'Routine' is not available in version 'A'
Message no. RSO252
Diagnosis
You wanted to generate an object with the name '7KU37C7IG3T7AQ5NHSLEZVC91' (in transport request ROUT) of type 'Routine' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version A. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
System Response
The object was not taken into account in the next stage of processing.
Kindly advice how to rectify this errorHi,
You see the which infoobejct contains that routine and first collect that infoobejct and transport it then transport Transfromation. I hope you are missing some Routines while collecting the Transformations into request.
See OSS Notes:
Note 613581 - Transfer structure does not exist in version 'D'
Note 508921 - P11:Content transfer:RSO 252 or RSO 296:InfoObject
Note 1157873 - BI7.0(SP18) Message RSO 252 using transport connection
Thanks
Reddy -
Error while Transporting Request
Hi All,
we have ECC 6.0 on Unix environment.
we had copied a production client with group selection, as we wanted all the three system PRD,DEV,QLT in sync.
the export was succesfully done.i copied Cofiles & Datafiles which are generated in DEV & Quality server,then i add request no in transport queue. the time when i copied transport request was not releasing from development.we checked the destination it was full so we removed the old request. then req is releasing.
after that i deleted the Cofile & datafile from OS level of DEV & QLT & trying to delete the reques from request queue. it is deleted but when im refreshing the queue its coming back in the queue.
while transporting other request its giving me error.
please help out me.Hi Aasmi Gawas,
Please could you post the error?
We don't have a crystal ball to see the errors in your system...
Best Regards,
Erick ILarraza -
Error while importing a transport request
Hi,
I installed two SAP ECC6 EHP6 IDES sytems and created a transport route between them.
When I try to import a Transport request I get the following error:
HALT: inconsistent preview tables E071K_STR (size=344) and E071KS_PREVIEW (size=128)
Please help me find a solution to this problem.Hello Occoro,
There are multiple steps you need to do, I am not sure if the following note is applicable to your version of SAP.
1730009 - Import queue does not work
Downloading R3trans and tp is similar to downloading kernel.
Download the versions relevant to your SAP Kernel 7.20, the latest patch should be available at http://service.sap.com/swdc
In the same area where you get SAP Kernels, you should be able to get files such as:
R3trans_xxx-xxxxxx.SAR
tp_xxx-xxxx.SAR
Download these files, uncar them to your kernel directory typically /sapmnt/<SID>/exe
Refer to the following note for more details:
19466 - Downloading SAP kernel patches
Good luck.
Regards,
Siddhesh -
Error while releasing Transport request number
Hi Friends,
Whenever i release the Transport request from SE01 i am getting the following error. Please view the attached image . Could you please explain about that error ? and how can i prevent it in future ?At starting it shows warning like " Your object contains error continue or cancel " but if i proceed with continue after completion of the releasing process it shows (0) successfully completed but not with an error message. As Krishna Chaitanya said i might have used any dependent object. by reading all of your answer i could understand that this is not sever problem. But i would like to understand this process very clearly . All i want to know is
how to release the request without any inconsistencies?
and which is the best way, ?
is there any requisition before i initiate releasing ? -
Error while releasing transport request
Hi,
When i tried to release the transport request, it returning with code = 8 (error) so transport has not done. When I digged into the transport request, error message is
'unimplemented function REPC_OR_DELETE DOCUMENTATION'.
Thanks in advance.
Arvind...Hi,
This is more related to the BASIS side,
still have found one solution in one of the thread. Still contact you BASIS administrator for it.
Solution.
Is the error pointing at TP or R3trans?
In this phase, we get error coz of r3trans.
Please try following the note 206168. which tells you to change the r3trans.
If you have changed the r3trans earlier, then try using the same r3trans as provided in the kernel CD.
Jayant Sahu
Maybe you are looking for
-
Changed our ASA IP address and we're no longer able to Authenticate with RSA.
Hi, We changed our ASA IP last night and since then we can no longer authenticate with RSA. I know we had to modify the IAS policy on our DC to the new IP but I'm not sure where I would change that in RSA. Any one have an idea? ASA 5510 (8.3) RSA (
-
Reinstalling oracle 8i in solaris 10
hi i was trying to install oracle 8i in my solaris box and for some reason the computer froze and i had to restart the computer and the installation also. But now it gives me an error saying that there is not enough space and when i try to uninstall
-
Planning Materials in different BOMs
Hey Gurus, We have a situation in which a part number (6001116) is a subassembly of a higher level material (8000375). This material (6001116) is also a material that we create a production schedule for independent of the 8000375. We also have inde
-
Is there any add-on that wud help me "inspect element" something on any webpage
An add-on to " inspect element" and change the script of the HTML is required.. Is such an app available? For Firefox android
-
Just got iPhone 4S, people unable to hear me during calls but I can hear them? Is it repairable or do I need to take to apple store to get new one?