Reverse y axis in graph

How do I reverse the plot on a graph without using negative numbers?

Jerry,
I'm plotting data points, not a function so the Grapher.app isn't much help to me, but thanks for telling me about it (might be useful later). Having the y axis reversed isn't as important to me as having the x and y axis crossing at zero. I don't mind having the downward values as minus (as is normal), but now if I plot it the x and y axis don't cross at zero!! Surely this is a basic feature that should be available?
If possible maybe you could let me know of any other tricks or overrides that might be useful?
Badunit,
Thanks for your suggestion, I already tried that method, and as I said before my main problem is the x and y axis not crossing at zero (I'm studying engineering so they are very fussy about these details, and personally I'm a bit of a perfectionist), also manually putting in the x axis for 50+ graphs (all with varying scales) is something I'd rather avoid!

Similar Messages

Date on X axis in graph

In which type of graph I could get date on X axis in graph other than line and bar. My graph has date in x axis and aggregate in y axis and a bubble in z axis which graph will support it.

this is to john
when drag and drop gantt>resource utilzation
i try use some date to display gantt but throws error.
so my question.? can we use date in gantt>resource utilzation.
if i remove date. it looks fine.

Reverse Y-Axis sequence on Analyzer graph

We would like to report rankings, 1-10 on an analyzer graph. Not a problem, however, we want 1 at the top of the y-axis, and 10 at the bottom (1=best). Is there are way to reverse the sequence of the y-axis...it comes out 10, 9, 8 ..1 top to bottom, and I don't see anywhere to reverse within Analyzer.Thanks!

A solution consists to put a negative sign to the member that is used for ranking, in your Essbase outline (To avoid a problems, you can create and USE for ranking a SHARED MEMBER which will be the negative equivalent of the account member used originaly for ranking). Then, you will able to applicate the ranking using the new negative shared member account and by selecting the BOTTOM 10 members. At last, change the negative sign to positive one in Analyzer Analysis Tools Manager. I Hope that this will help you...Regards

How to reverse x axis in stacked bar graph generated by Keynote?

My question is demonstrated in the figure 1 below. How to reverse the x axis so that the relatively small black area appear on the right(as figure 2 shows.)
fig. 1.
fig. 2.

In the chart data editor, click and drag one of the the rows to change the ordering:

Reverse y axis columns

Hi.
I'm using numbers to create a chart for my website alexa rank. x axis is dates; like september 13 2011. and y axis is site rank in each day. as you know, when rank number is lower its better, so I need to reverse the y axis columns. how can I do this?

Numbers always graphs with values ascending toward the top of the chart, so you'll need to do a minor fiddle on the data to make the graph do otherwise.
Here's an example showing alexa's rank in an imagined list of 10 sites.
Columns C and D contain the same formula, but with one argument changed.
C: =RANK(B2,B,0)
D: =RANK(B2,B,1)
Each is filled down its respective column.
The third argument controls the direction of the ranking. The second (in column D) is selected as the set of values to be charted.
In the Chart Inspector, click on Axis, then uncheck "Show Value Labels" in the Value Axis (Y) pop-up menu.
Replace the now missing values with a descending list as shown, typed into a text box. You'll need to use the Text inspector to adjust the space between lines to align the numbers with the grid lines on the chart.
Regards,
Barry

Re: How to have more than one vertical axis in graphs...

As a matter of fact, there is a library of dual-Y-axis controls, developed
by National Instruments, but for some reason it did not make it into the
official release. I've been using it under v.5.01 quite successfully. The
only problem with it is that if you try to edit it using control editor, LV
crashes (under v.5.1 and WinNT 4).
-- Sergey Liberman
-- Don't use Reply button! Thank you.

I'm running into the same problem... can somewhere give me a pointer
to where I might find a library like this? I have done the "put
the y-axis on the right side of the second graph" and it works pretty
well, but I'd like to see how other people might do it.
Hopefully the LabView folk will also implement a scrollbar for X-Y plots
(like they have for the charts) sometime... sometimes strip charts aren't
sampled evenly.
Andrew Berkley
Physics Department
University of Maryland
RE:
>> As a matter of fact, there is a library of dual-Y-axis controls, developed
>> by National Instruments, but for some reason it did not make it into the
>> official release...

Y2 axis in graph is only numeric, iwant to put a date column

Hi,
I want to create a report in report 10g have a graph (chart), i want it to be like this :
X2 axis : Sequance id (Number Column)
Y2 axis : End-date , Start date (Date Column)
But when i create it , there is no possible to put a date colunm in Y2 axis.
So, plz is there any way to in Y2 axis a date column ??
Plz is there away to put a date column in Y2 axis in Report 10g ???

Any help ?

Unlinear axis in graphs

Hi,
I'm wondering if there is a way to have the Y-axis unlinear in a graph?
// Erik Swenson

"Erik Swenson" wrote:
>>Hi,>>I'm wondering if there is a way to have the Y-axis unlinear in a graph?>>//
Erik Swenson
Hi
Absolutely! in X/Y & Waveform Graph you can
change the X&Y scale, by selecting the formatting X or Y and change the mapping
mode.

Dynamicly set y axis on graph with 0 always being in center

i have a report that i want to dynamicly set the y axis as the values change from contract to contract. but i want to maintain that 0 will always be in the center of the graph.
if i use the auto range and auto scale it shifts 0 away from the center.
any ideas?

Don't use auto range?
Sorry, I don't mean to be a smart-alec, but Crystal's charts are not very flexable. I understand they are working on it.
Debi

Size marker and time axis scatter graph

1.Can we increase default size of marker in scatter graph?
2.Also, for the time axis can we format the date to be able to show (mm/dd/yyyy) for all the values on axis rather than just the first one ?

Hello,
I still didn't find a solution.
I can show the data in the bar graph or in line graph, but not in scatter graph. In the scatter graph, there could be set for x and y axis just number values.
But is it really not possible to create the graph with time x-axis and number(or string) y-axis?
Has our customer so special requirement? Or is there no answer because it's so easy?
In the previous post, I've forgotten to write that my version is 11.1.2.1.0.
Regards,
Qjeta

Change gearing sign (reverse slave axis)

Hello,
I am building a precision winding machine: the mater motor controls a cylinder and the slave motor movese the head with the wire. The objective is to wind the wire in a 3d helix. I am using a cRIO 9022 with two NI 9512 drivers.
The problem is that I need to be able to change the gearing sign, so that I can do clockwise and counterclockwise helixes but always move the master motor (and the cylinder) in the same direction (the winding machine is built so that the wire should only be pulled in one direction).
I have tried reversing the sign of the numerator in the gearing VI to get the slave motor to move in reverse but this does not seem to work. The only solution I have found is to reverse the motor phase by swapping the A and Abar wires in the 9512 driver.
I can attach a copy of the project if needed.

Looking at the SoftMotion Multi-Axis Gearing example (Function Block or Express VI versions), I do see the numerator with a negative value and the slave axis then moves in the opposite direction from the master axis. I would expect this to work with motors as well as the simulated axes I'm looking at.
Some questions:
Are you using SoftMotion? Which version of the software are you using?
Are you trying to change the gearing during operation, or do you set a ratio and run with it through the full operation?
It might be useful to see the project, as you offered.
Thanks,
Edwin!

Reversing an axis

I need to make a log scale graph, but my x axis has to go from 1000 to 0 instead of 0 to 1000. Can someone help me with this?

select the graph, then select the menu item "Arrange > Flip Horizontally"
I hope this helps. You can remove the axis labels by changing the settings in the Graph Inspector.

Can't Title 2nd Axis on Graph

Post Author: jlspublic
CA Forum: General
I have a graph with two Y axes. On the Chart Options dialog, Titles tab, whatever I enter in the Data2 Title box is discarded when I click OK. Based on posts to the old Forums, this appears to be a bug that has been around since at least 2002. Anyone have any idea how to get this to work properly? Any workarounds? I am using CR XI Developer (version 11.5.0.313).-JLS

first create the directory ocfs in /mnt and then mount, it will get mounted
give the following command after having created the directory
mount -t ocfs2 -o datavolume,nointr /dev/sdb1 /mnt/ocfs
it will work defenitely!

How to draw x y axis bar graph wih report in output

Hi Experts
I have seen most of the thread rgarding Graphs.but my requirement is not meeting with them
i am creating simple report in which in output 1st showing consolidate data for material in a table
and below them i want to show graph for material .
i dont want to open graph in diffrent window.
Thanks

solved

How to display no. of seconds in HH:MM:SS format on Y-Axis in Line Graph

Hi All,
I have two columns as No. of Seconds and Date.
I want to create a Line Graph with Date on Horizontal Axis (X - Axis) and, on Vertical Axis (Y - Axis) I want to represent the No. of Seconds as HH:MM:SS format.
For example, If the DB returns No. of Seconds as 93, I want to get it on Vertical Axis as 00:01:33 (00 hours, 01 Minute, 33 seconds), If it is 145 seconds , I want to get it as 00:02:25....etc.
Can anyone please help me on this ?

Srini VEERAVALLI I already used this code and I'm getting HH:MM:SS format in Table View, but my requirement is I need to represent the HH:MM:SS format on Vertical Axis in Graph View. In Graph View by default it's considering No. of Seconds only.....
Srini VEERAVALLI, is your full name is Srinivas Veeravalli ?

Reverse y axis in graph

Similar Messages

Maybe you are looking for