Reversing a sequence all shots at a time
I recently made an animation with an slr and have imported the stills, but it needs to run backwards. Aside from exporting it then putting it back in is there a way to reverse the entire thing?
thanks
Hi -
Yes. Make a copy of your sequence.On that copy, select all the clips on your timeline and type Option-C. You will be asked if you want to nest these items, click yes. This will create a nest of the frames, turning them into one virtual clip. You can then contol click on that nest and select Change Speed . . . from the drop down menu. Click the reverse button and the sequence of stills should now play in reverse. You may need to render.
But if it were me, I would just export a quicktime of the original sequence, and then import that quicktime, place it on the timeline and make it run in reverse as outlined above.
Hope this helps.
Similar Messages
-
How can we see status of all Requests at a time using any tables?
How can we see status of all Requests at a time in the Info cube or ODS using any tables? what I am facing was while I run a Process Chain in some data targets red requests remains and due to this all other requests doesnot available for reporting.
Now is there any T-Code or Table to view all requests in a single shot.
Thanks in advance,
RajHi Go for RSMONICDP give timestamp and u'll have it.
Please assign points if useful
Edited by: Aadil on Jan 21, 2008 7:43 AM -
How do I reverse DOWN LOAD ALL done in error on my iPad with my newly set of ITUNES MATCH that has some 22,000 tunes. I have not found away of stopping it; every time I play a song it automatically downloads onto my iPad. Help!
Thank you so much for the response. This half sorts out my issue, as turning off Musicmatch means I can load music onto my iPad, but the minute I turn it back on to access my library whilst travelling I will lose what I have loaded as it comes up saying " all music will be erased".
I really apprecaite your time, so will just have to live with what I load. Seems weird that Apple wouldn't consider people want to listen to music on planes or in Non - wifi zones??
Thanks again! -
LR 3 Collections into LR 4 -- should I re-edit all shots using PV 2012
I Updated to LR4 which of course picked up all of my LR3 Collections, about 5,000 pictures spread around in 20 Collections in one Catalogue and brough them into LR4. I have spent a year developing all of those shots and learning the ropes. I saw that the old LR3 sliders were still present, which I guess means that LR4 was still using the LR3 PV2010 engine until you tell it to switch to the new PV2012. I tested that on a few shots (without changing the whole collection) and noticed that the changes were fairly dramatic, which means I will have to re-edit them all if I update them into the new, better and more powerful sliders in the new development engine. I want to do that, but it could take ages to re-develop and optimize all of those (around 5000) shots. How do you think I should handle this? Just leave them how they are (PV2010 and the old sliders) and just use PV2012 on newly imported RAWs or start slowly updating them all as I have time? What are the pro's doing to their LR3 old collections? They are probably leaving them alone and just using PV2012 on new shots, or if they have to print fine-tune an old shot for printing, they would probably re-develop it using the new sliders in PV2012. What should I do? I can't just update all collections into PV2012 automatically because they look bad across the board. They have to be re-developed don't they?
Thanks, Greg JohnsonGreg J 1956 wrote:
What are the pro's doing to their LR3 old collections? They are probably leaving them alone and just using PV2012 on new shots, or if they have to print fine-tune an old shot for printing, they would probably re-develop it using the new sliders in PV2012. What should I do?
You really need to test this for yourself. I would NOT to a mass update to PV 2012. If you have an image optimally adjusted in PV 2010, there's nothing wrong with leaving them untouched...that's why the LR engineers went to the trouble of leaving in the PV 2010 and not forcing an update.
The change from PV 2003 to 2010 were mostly image sharpening and noise reduction. It left most images looking the same unless you inspected at a higher zoom. With PV 2012, the rethinking of the Basic controls was substantial. Depending on what controls you used a lot of in PV 2010 (lots of highlight recover or fill light come to mind) you may never get an exact match in PV 2012. That's why it's still there. If you have invested a lot of time tweaking images in PV 2010, I would be very careful and cautious before upgrading. For new images, PV 2012 will be default.
So, I would ease into the adoption of PV 2012. Nothing wrong with deciding you've already got the best out of your images... -
When I enter time machine (on Time Capsule) i see the stack of screen shots and the time line. However, when I roll over the mouse pointer, the time line does not activate. The cancel button does not get me out of the app: have to alt+cmd+esc. Ideas?
I have never seen it but then I run SL which is much more reliable than Lion..
See
http://pondini.org/TM/E4.html
Check the master guru of all TM problems. -
Encoding just a part of a long sequence - ALL audio clips are processed ?!?
I have a 60 minutes sequence - among other stuff, it has about 30 audio clips.
When I define my work area to be - let's say 45 secs and _Export_Media to AME, all audio clips from the source sequence are processed, what is time-consuming and boring.
Is there a way to avoid this ?Yup.
-
My Preview opens all my pics at time instead of open one by one. It occurs when I open any JPG FILE. What should I do to fix it? Thanks
First use JPanel not Panel.
Panel panels[]=new Panel[4];becomes
JPanel panels[]=new JPanel[4];Then refactor your code so that you use arrays correctly:
panels=new Panel();
panels.setLayout(new FlowLayout(FlowLayout.LEFT));becomes
panels=new JPanel();
panels[i].setLayout(new FlowLayout(FlowLayout.LEFT));
I did the above changes to your code and it worked fine.
Dave -
How do I close all tabs at one time without closing Firefox completely?
How do I close all tabs at one time without closing Firefox completely?
Open a new window. Go to the other window with all the tab. Close it. You now only have that newly open window.
Hub -
How to delete all data in all tables in one time ?!
1 CREATE OR REPLACE PROCEDURE delete_all_data
2 IS
3 v_statement VARCHAR2 (200);
4 BEGIN
5 FOR i IN (SELECT *
6 FROM user_tables)
7 LOOP
8 v_statement :=
9 'delete table ' || i.table_name ;
10 EXECUTE IMMEDIATE v_statement;
11 END LOOP;
12 commit;
13* END;
SQL> /
Procedure created.
SQL> exec delete_all_data
BEGIN delete_all_data; END;
ERROR at line 1:
ORA-00903: invalid table name
ORA-06512: at "DE2.DELETE_ALL_DATA", line 10
ORA-06512: at line 1
I made the previous code , but it's didn't work with me .... any help for this problem please ?!
I'm just reminder ..... all what I need ,that delete all data in all tables in one time only .
I'm waiting for the answer ..... and thanks in advancecreate or replace
FUNCTION TRUNC_SCHEMA RETURN NUMBER AS
CURSOR select_table IS SELECT TABLE_NAME AS TNAME FROM USER_TABLES ORDER BY 1;
sTableName Varchar2(128);
sUser Varchar2(128);
sConstraintName Varchar2(128);
plsql_block Varchar2(512);
BEGIN
SELECT USER INTO sUser FROM DUAL;
IF ((sUser='SYSTEM') OR (sUser='SYS')) THEN
RETURN 1;
END IF;
EXECUTE IMMEDIATE 'PURGE RECYCLEBIN';
-- DISABLE table's constraints
FOR C1 IN (select CONSTRAINT_NAME, TABLE_NAME from user_constraints where STATUS = 'ENABLED' AND CONSTRAINT_TYPE in ('P','R') ORDER BY R_CONSTRAINT_NAME) LOOP
sConstraintName := C1.CONSTRAINT_NAME;
sTableName := C1.TABLE_NAME;
plsql_block := 'ALTER TABLE ' || sTableName || ' DISABLE CONSTRAINT ' || sConstraintName;
EXECUTE IMMEDIATE plsql_block ;
END LOOP;
FOR D IN select_table LOOP
--get table name
sTableName := D.TNAME;
-- clear table
plsql_block := 'TRUNCATE TABLE ' || sTableName;
EXECUTE IMMEDIATE plsql_block ;
END LOOP;
-- ENABLE table's constraints
FOR C2 IN (select CONSTRAINT_NAME, TABLE_NAME from user_constraints where STATUS = 'DISABLED' AND CONSTRAINT_TYPE in ('P','R') ORDER BY R_CONSTRAINT_NAME desc) LOOP
sConstraintName := C2.CONSTRAINT_NAME;
sTableName := C2.TABLE_NAME;
plsql_block := 'ALTER TABLE ' || sTableName || ' ENABLE CONSTRAINT ' || sConstraintName;
EXECUTE IMMEDIATE plsql_block ;
END LOOP;
RETURN 0;
EXCEPTION WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE('ERROR: ' || SQLERRM);
RETURN 1;
END TRUNC_SCHEMA;
/ -
Hello Guys.
I had problems in the Computer before and changed my HD. I saved in my all files documents in (Time Capsule). How can I put all my files, pictures documents on my new HD?
Please Help.
Thank You
Julio SkovHey
Thank you very much for replay.
Would you explain to me how can I do?
I don't really understand these processes.
Thak you very much
Julio -
How to download 'all photos at a time' from shared stream?
I have a photo stream shared album (with 120 pictures) on icloud. This is shared from iPhone. I opened the link on my mac/windows in the browser. Now, how to download 'all photos at a time' from shared stream? I don't want to download each photo at a time. There are 100s of photos to download. I can't open one photo at a time and keep downloading them separately. There should be a way to download all photos from a shared stream. Please let me know how you are dealing with this?
1.you need create a dba user in your database
2.you can run the script as command
eg. use PL/sql developer ->new command window->open script-> run. -
How to select the all object at a time while installing business content
Hi All,
how to select the all object at a time while installing business content Please let me know if nay document is there
Thanks Ahmed PashaHi,
Please check out the below links
[Business content Installation|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/102906a4-f13d-2e10-7199-ce316ff254b8?QuickLink=index&overridelayout=true ]
[BI Content|http://wiki.sdn.sap.com/wiki/display/BI/InstallingBusinessContent]
Hope it helps.
Regards,
AL -
Just had a new hard drive for my iMac and reloaded all my stuff via time capsule, all works fine apart from Safari which won't connect to internet. Airport is connected but each time Safari comes back saying there is no connection....any help gratefully recieved.
So you have the apple rotuer called a time capsule and you have complete the frist time machine back up? but there is not internet access ?
If so.
Opem airport utiltiy on your Comptuer :
What is the IP ? > if its 169.254.xx.xx > its a self assigned
Try power cycling the Internet source for up to 1 mintue and make sure all the lights turn off.
In Airport Utility Version 5.5.3 / 5.6.1
Gi > Intenret > conncetiong sharing > Is it off bridge mode change it to share a public Ip address
In airport Utility version 6.0/6.1
Edit > network > rotuer mode : Should be DHCP and NAT unless you use PPPoE to conecnt to the internet then this is automatically invoked. -
When I reboot my mac it automatically launches disk utilities. i have run the utility. all clear. but each time i reboot i get the disk utility. how do i override so i can have my hard drive back?
What OSX version is it?
Does holding alt key at bootup show any boot choices?
Does holding Shift key at bootup to boot in Safe mode do the same thing? -
I have iphone5 and now been given Nokia lumia 520 for work. How can I ensure that my calendars all sync in real time between each phone? Many thanks for any advice
Well if you got the Phone Pggray43 at a Local Corporate store in your Area) you should be able to return it as long as you have all the contents.! Phone, Charger and any other accessories that came with it the Box of Course.. As long as you have not went past the 14 Day return.. the store can go over what you used as in Air Time and Data..
Now if you've went past the 14 Day return you be Liable to pay a E.T.F = Early Termination Fee the fee for this is around $300 so hopefully you have not went past the 14 Day return window the Manager if Available is the one I would talk to tell them your on Social Security and you just can't afford a phone as this I'm sure they'll work with you to get something solved..
Hope ya have Good Luck.! b33
Maybe you are looking for
-
Dear all, I have a requirement of a tag printing in which inspection lot details are being printed. The Tag being printed every time of partial UD, here the problem in printing of the tag observed. The tag contains the inspection lot cleared qty, but
-
Nikon D750 raw files not readable by lightroom?
I just purchased this camera and found out Lightroom 5.4 can not read the files. Is there a way around this problem?
-
Requesting thoughts on Documentum, Sharepoint, and CMS with FrameMaker
My company is considering getting a CMS to be used with structured FrameMaker. We now have version 9 but willing to upgrade to version 10. I know that version 10 has the ability to connect to Documentum and Sharepoint. I would like to know others' ex
-
Hi folks, Can anybody tell me the BAPI name to update the plant, route and storage location in the sales order. if possible please tell me BAPI name in general which updates the sales order values... thanks in advance
-
I do not see this in iPhone documentation. In Itunes Help it says to display the songs through the disclosure triangle on the iPhone. I did that....but the songs are greyed out and are not selectable. What is the correct process?