Reversing changes in a transport

Hi, is there a faster and easier way of reversing all the changes you have did under a particular transport?

Hi Evie,
I dont think standard SAP functionality has such facility. But FYI, at my client we use one software for our transport management which releases the transports for us and if we dont find the relevant changes then you can reverse the transport and changes gets reversed automatically.
Arti

Similar Messages

Webinar: Change Management and Transport in the Enterprise Portal

SAP NetWeaver Know-How Network Webinar:
Change Management and Transport in the Enterprise Portal
Wednesday 21 July 2004
11 a.m. EDT
On Wednesday 21 July, Scott Jones hosts the webinar titled Change Management and Transport in the Enterprise Portal as part of the ongoing SAP NetWeaver Know-How Network Webinar Series.
Heres how Scott describes his webinar presentation:
Change Management offers special challenges to administrators working in Enterprise Portal 6.0 SP2 environments. This talk provides recommendations and tools, and defines best practices and methods for the effective transport of Enterprise Portal content, with special attention to content dependencies, tracking, and troubleshooting. We'll also look forward to Change Management enhancements coming with Netweaver 04.
SDN invites you to post your questions to the presenter prior to the webinar and continue the online discussion afterward.
How to Participate
(Please go to the SDN Events page to see the article and download the PDF presentation)
Dial-in Information:
Date: Wednesday 21 July 2004
Time: 11 a.m. EDT
Within the U.S., call: +1.888.428.4473
Outside the U.S., call: +1.651.291.0618
Password: NetWeaver04
WebEx Information:
Topic: SAP NetWeaver Know-How Network
Date: Wednesday 21 July 2004
Time: 11 a.m. EDT
Meeting Number: 742391500
Meeting Password: netweaver04 (lowercase)
WebEx Link: sap.webex.com
Replay Information:
A recorded replay of this call will be available for approximately three months after the webinar. Access this recording by dialing the appropriate number and using the replay access code TBD.
Toll-free: +1.800.475.6701
International: +1.320.365.3844
About the SAP NetWeaver Know-How Webinar Series
The SAP NetWeaver Know-How Webinar Series is driven by the SAP NetWeaver Regional Implementation Group (RIG), part of the SAP Development organization. The mission of the SAP NetWeaver RIG is to enable customers, employees, and partners to successfully implement the SAP NetWeaver solution. This SAP RIG has expertise in BI, EP, XI, and WebAS. They contribute their implementation expertise to the SDN implementation forums as well as to the SAP NetWeaver Know-How Webinar Series.
Disclaimer
SDN is not responsible for any changes to the webinar schedule. The webinar schedule may be changed or cancelled without prior notice.

Hello,
In the intresting document I read that for the deployement the version number mentionned in the MANIFEST.MF is very important in a clustered evironment.
SAPnote 727180 - Version of PAR File in Manifest File
denies this.
Can you clear this out?
Kind Regards
Koen Van Loocke

While installing a program (MediaCenter.exe) to handle audiobooks from the library, I erroneously associated the download site with Windows Media Player instead of the actual application (NetLibrary Media Center). How can I reverse/change this?

While installing a program (MediaCenter.exe) to handle audiobooks from the library, I erroneously associated the download site with Windows Media Player instead of the actual application (NetLibrary Media Center). How can I reverse/change this? Reinstalling the application does not clear the error, so I'm assuming the association is somewhere in Firefox.

Never mind -- I just found it under Tools/Options.../Applications, where I changed the incorrect association of "nlmcp" from Windows Media Player to the correct one, NetLibrary Media Center. Done!

How to change the text Transport id code in sus

Hi,
How to change the text Transport id code in sus while creating ASN
Please advise.
Regards,
manu

SE80---> BSP APPLICATION with SRMSUS ---> views -->asn > detail_edit.inc.->
On the right hand side in the details ---> search for
BBP_SUS_UI/ASN_TRANSPORT_IDENTIFICATION
replace the above with the following
BBP_SUS_UI/INVOICE_DOCUMENT_NUMBER
BBP_SUS_UI/INVOICE.
there is no entry available for invoice number , only the above two are available.
save the changes
activate the changes
REWARD POINTS IF USEFULL

How to reverse/change SRM PO with status "transaction completed"

We use Extended Classic scenario in our company. There is a PO has outstanding G/R balance, but user accidently hit the button "complete"on this PO in SRM , in result the PO has been completed with status "transaction completed". And nothing can be performed on this PO.
G/R balance is out there and now it has financial impact as it blocked the funding thru internal order.
Anyone have idea how we can resolve this problem. Can we reverse/change the PO status? Please note G/R canu2019t be entered in ECC as restricted.
Thanks,
Frieda

I think it was CRM_JEST. But the way to easily select the correct entries:
1. Go to transaction BBP_PD
2. Enter BUS2201 and the order number
3. Double click on the status table, this will take you to SE16 with all the different status for the PO
4. Select the entry to delete
5. Enable debugging by putting /h into the transaction field
6. Double click "CODE" and change this to "DELE"
7. F8 (leave debugging)
8. Click on the delete icon and save.
Done.

Changing of Stock Transport Order

How can I find out who changed a Stock Transport Order, and on which date it was chaged.

Hello,
1)Normally, every change that has happened in SAP documents can be tracked through change tables CDHDR(Header Table) & CDPOS(Item Table).
2)Another way of doing it, is going through menu path by opening the Stock Transport Order & selecting Environment-> Changes.
Hope these details resolve your query.
Regards
Mahesh

Delete change request in transport queue

hi,
is there a possibility to delete change requests in the transport queue (stms)?
thanks
mike

hi,
Yes, you can delete change requests in transport queue.
You can do it in SE10. Place the cursor on the item and press delete button on application tool bar. If it dint get deleted. Then right click on request and press Sort/Compress . Then try deleting again.
Regards,
Sailaja.

Why does Lion KEEP reversing changes you make in address book and other applications without your consent and without wanting it to??? Plus address book will NOT import old address book contacts from Snow Lepoard 10.6 and keep them. This Lion OXS 7 is ..

Why does Lion KEEP reversing changes you make in address book and other applications without your consent and without wanting it to??? Plus address book will NOT import old address book contacts from Snow Lepoard 10.6 and keep them. This Lion OXS 7 is .. becoming very frustrating ... it will NOT keep changes made in the Address Book and it has destroyed my contacts which I only have electronically since 10.4 in my address book. I am NOT happy with this OS7 it has a lot of issues and faults. How can one stop automatic reversing of data when inputting???
Please help!
Wished I NEVER upgraded to this Lion!!!
Carmelo

Relax. Your address book database is corrupted.
If you are syncing your Contacts with MobileMe or something else, disable it for now.
Backup your address book by going to File>Export>Address Book Archive.
Quit Address Book.
Open your Library by holding down the Option (alt) key while selecting the Go menu in Finder. Select Library. Navigate into your Application Support/AddressBook folder and delete the addressbook-v22.abcddb file.
Open Address Book. It will recreate the database from the raw data.
See how that works. If it is ok, then reenable syncing and see how that works.

Cannot set status of Urgent Change after manual transport

Hi all,
We are usng CHARM in Solution Manager 7.1 for import to the SAP ECC (EHP6) systems.
I cannot set the status of the Urgent Change document (ZMHF) to status "To be Tested" after the transports were manually released and manually imported to the ECC QA system.
When I use action "Pass Urgent Change to Test", the system stopped with error "Not all task are yet released" and will not change the status .
Based, on the Task List log, the system started the release process although no transports were released.
Is there any way that I can update the status of the Urgent Change document to "To be Tested"?
I tried program CRM_SOCM_SERVICE_REPORT but still did not change the status.
Any suggestion?
Thanks,
Tess

Hi Venu,
have a look under System Administration - System Configuration -- Knowledge Management -- Configuration --Content Management -- User Interface -- Commands -- UI Command Groups -- StatemanagementGroup.
See Java class: com.sapportals.wcm.rendering.uicommand.cm.UIStatemanagementGroupCommand. Take the class and decompile this and everything needed around to understand how this class works.
Then you can choose to extend this CommandGroup to also have a command "Resubmit for Approval" or you can implement your own UI Command only for resubmitting (you will also have to activate your command (group) by settings within the configuration).
On the other hand, if all this is completely new to you, I'm a bit sceptical if the task isn't a bit too big as a first task on KM implementation topics...?
Hope it helps
Detlev

Change webservice client transport/binding

I am migrating web service client generated by clientgen from 7.0 to 8.1. 7.0 client uses weblogic.webservice.binding.soap.HttpClientBinding which works directly with sockets and is fine for me. But 8.1 uses weblogic.webservice.binding.http11.Http11ClientBinding which works with java.net.HttpUrlConnection that requires proxy being set in java system property which is system wide and I cannot use that. HttpClientBinding uses system wide setting as well but it is webservice client specific at least.
So I want use HttpClientBinding in 8.1 as well. I am able to change it by calling
BindingFactory.getInstance().register("http11", weblogic.webservice.binding.soap.HttpClientBinding.class);
but this is again system wide setting which I am afraid of because of influencing other WS clients not using proxy. Is it possible to do it somehow in per client basis?
Injecting custom Binding info with getTransport returning "http" or in some other way.
Alternatively any way allowing me to set proxy on per WS client is solution for me

Hi Dahran,
SCC7 is for post import.
first you have to import the transports generated during the export into your client.
STMS. Go to your import queue and choose in the menu
Extras ->Other requests add
Fill in the transport number of one of the generated transports during the export. (something like <SID>KX0000x)
After the import you have to perform the SCC7

Portal not picking up the changes when I transport to live system

Hi All,
I created a report by using report designer in dev. system when I run the report it is picking up the changes in the portal but when i transport the report to live still i can see the changes i made in the report in report designer but when i run the report it is giving me the same old version of the output instead of new changes.
Could any one help....please

Hi
Open the workbook
Place your mouse on the result area and right click...there one window will open ....in the properties...go to Interaction tab...and tick mark..third option refresh query when opening workbook
Save the workbook
Again change the query and see your change is saved in the workbook
Assign points if useful
Thanks
N Ganesh

I want to know how to change schedule on Transport Requests

Hi.
I want to know how to change schedule Transport Requests.
And the Transport requests has already approved by Transport Proposals.
Now I tried to change schedule after re-creat Transport Request,it is same
Transport Request Number.
But I can't change schedule.
Please help me!
Thanks.
Toshi

In full editor, Image>Resize>image size. Be sure to check "Resample Image & Constrain proportions".
You can also do it with the crop tool. On the tool's option bar, enter the resolution in the appropriate box.

Why the "Change Package" in Transport Connection shows "Request/Tasks"?

We want to transport our custom InfoCubes from Developement environment to Test environment:
RSA1 -> Transport Connection, select an InfoCube we created and drag it over to the right frame, group it by "In Dataflow Before and Afterwards". The Package column shows it's attached to $TMP that we would have to change it to a custom package that it can be transported over. We click the Package picture icon with a pencil trying to change the package attached from $TMP to a custom one, but can't find any custom package we created with SE80 from here and instead, in this window, the first column is "Request/Task" and the values under this column are all checkboxes. The last column is "Object Name". I wonder if the "Change Package" picture icon only lists all the request/task for the selected transport objects selected other than the packages we expect? Weird!
Thanks

hi Kevin,
the 'normal' way has been explained by Roberto and Siggi.
if you still want change package screen in transport connection, it will go to package change/object directory entry screen after you mark the 'request/task' and click 'V'
Re: Why created package with SE80 can't be found in Transport Connection?

To include the Rule changes to a transport request

Hello,
I have a rule with the category as responsiblities and tried adding the agent to that rule. The agent got added and saved. But not assigned to any transport request. How can i save these changes in a tranport request.
Thanks,.
neslin.

I think it got already savedin some other workbench request, what you can do is try to createa new workbench request and then goto PFAC txn and enter the rule ID and click on Utilities - > request management -
> and select the newly created request number and Give the PROG as R3TR and OBJID as PDAC..
But make sure that the task created for you should be of type Development/Corrections...
In the responsibilities TAB you have a ICON with symbol Bus/Lorry click on it each time you add a new agent to the rule.

Change owner for transport from an external system

Hi Everyone,
I have some transports that were brought into our DEV system from an external system. (They're BSI transports but I don't think that detail is important.) We are using a third party transport management system (Insite) and in order to move these transports using Insite, I need to change the owner of these transports to myself. When I try to do so I receive an error "Request L6BK134312 cannot be changed: Incorrect system or wrong naming convention".
I've been told that all I need to do is to configure or add the source system to our DEV system and then I should be able to change the owner. My problem is that I cannot figure out where to go to make this change.
Can anyone point me in the right direction?
Thanks!
Jeff

Hi Jeff,
Yes, I do have a regular procedure that I follow to get this to work. Ruchit Khushu was correct when he said that it had to be "a normal customizing or workbench request." Creating a transport of copies never worked for me, so I had to set the task to Workbench.
Here's my procedure:
1) Import the transports
2) Go to SE10 and create a new transport
3) Change the task to Workbench by selecting it, using menu option Request/Task > Change Type... and select Workbench.
4) Click on the transport number to select it.
5) Select menu Request/Task > Object List > Include Objects...
6) Enter a transport you want to include
7) Repeat 5 & 6 until all transports have been included.
Hope that helps.
Jeff

Reversing changes in a transport

Similar Messages

Maybe you are looking for