Reversing Picking at Line Item level

Hello everyone
In our system we have implemented ECC 6.0 with SD, WM
Now when a Delivery Document is created from the Sales Order, auto picking is performed during the Delivery is saved.
Thus a WM TO is automatically created when a Delivery Document is created thus performing the WM Picking.
Now sometimes we require to reverse the WM Picking only for a single line item.
My question is if there is a tcode to reverse a specific Line item from the WM TO created for the entire delivery document ?
We use LT0G to cancel the entire WM Transfer Order.
Please guide me on this issue.
Thanks
vin

LT0G is not cancellation of transfer order, it is rather reversal. It creates a new TO.
Try to reverse the TO at item level in LT0G by choosing the "TO Item view" on the selection screen...

Similar Messages

Not to seen reversal doc in fbl3n line item level

Hi ,
We have posted doc and reversed it ,but we are not able seen reversal doc in fbl3n but at the same time we can able see orginal doc .
line item also activated for that GL account.
Your intime responce is highly apprecated
Thanks
Seshu

Hi ,
we can able see reversal doc in fb03 and also this is there in FS10N also but it's not there in FBL3N and when we select in line item level in fs10n it's saying no line item possible for this doc .
we can able see original doc but not reversal doc in FBL3N
More over this gl also activated line item disply
Thanks
Seshu
Edited by: vyshnava_sesh on Jun 1, 2011 4:52 PM

How can I add the expiration date at line item level

My User is selling voucher. The voucher is sell at line item. eg GV$5, GV$10,etc
Each voucher line item sold need to be entered with a EXPIRATION date of that voucher.
Maybe 3 months from issue, maybe 6months/1 year from issue.
How can I add this to the sales order line item level?
Which field can I used and how to configure?

Hi Colin ,
The question is not very clear , but i assume that you are asking about the self expiry date of the particular material ,
1. The setting you can do by activating shelf life data in material master :Plant data/stor1
2. its better to have a batch managed material for that you can sort the material acording the self expiry date.
3. Once you maintain self expiry date system by default pick the material at the time of delivery
Note-Shelf life expiry it will give the life of the material from the day of manfacture,remaining shelf life also will give .
Hope it is helpful
Best regards
Venkat

In report painter report, line item level drilldown report requirment

Dear All,
I created one report in GRR1, when I execute the report i am not getting line item wise drilldown option. For example one cost center no of line itemwise posting ( g/ls wise)posting is there. By double clicking on that specific line item we will go that ledger and see the data available in that ledger.In standard reports that option available but my own reports I unable to go drilldown at ledger level cost reports.
Please sugget anyone, where I am doing mistake in report creation level.
Thanks
M Srinivasa reddy
Ph : 9637399076

Thank you,
I attached reports to Library based on that I am able to drilldown line item level of the report.Is it corret or any other way for line item level drilldown option for report painter reports
Thanks
M Srinivasa reddy

Report at line item level but also for document total for once only

Dear all,
seek for your help for the following issue
There is a A/R invoice with 3 items
There is a report for retrieving the line item level data from inv1, user would also like to add a column to display the Document total , but the problem is, each line item will also display the Document total, any method to only display the corresponding Document total for once only?
Example, for AR invoice number 1234567:
Currently:
No.                ItemCode        Price      Qty    LineItemTotal      DocumentTotal
1234567       Item-A            10           1       10                       100
1234567       Item-B             50          1       50                       100
1234567       Item-B             20          2       40                       100
Requested to be presented as:
No.                ItemCode        Price      Qty    LineItemTotal      DocumentTotal
1234567       Item-A            10           1       10                       100
1234567       Item-B             50          1       50
1234567       Item-B             20          2       40
Thank you very much!!!

Hi,
Try This.....
select T0.DocNum ,T1.ItemCode ,T1.Price ,T1.Quantity ,T1.LineNum ,case when T1.LineNum ='0' then T0.DocTotal else 0 end    from oinv T0 inner join INV1 T1 on T0.DocEntry =T1.DocEntry where T0.DocNum=[%0]
Thanks
Shafi
Edited by: shafi_sunshine on Oct 19, 2011 12:50 PM

Shopping cart header status differs to status at line item level

Hello
I am using SRM 5.5 EC, got a situation where there is a single line shopping cart which has been approved. The status on the header is still showing "awaiting approval" but at line item level it shows as being "approved" and no follow on document has been created.
Can anyone help and let me know why this has happened and how to change the header status now?
Many Thanks in Advance
Prakash

OK found a solution

Switch to Open Item Management at a Line Item Level

Hi Guru's,
I want to change a non Open Item G/L account to an Open Item at Line Item level, we are on version 6.4
We have activated New G/L and I checked OSS note 175960, it says its not applicable if New G/L activated.
I tried program FAGL_SWITCH_TO_OPEN_ITEM , it switched the account to Open Item but the problem here is it did't switch at line item level it is just showing total balance. My requirement is to switch at Line Item level.
Is there any solution other than creating a new A/c with Open Item checked and transfering balances from old A/c to new A/c.
Please suggest
Thank You

Hi,
There are 3 ways to realize it.
1. create a new account with XOPVW, then transfer the balance from old account to the new one. this is recommended by SAP.
2. if you want to change flag of XOPVW in this account, then make the balance to zero, then change this flag in FS00, at last trasnfer the balance back to this account-> Not recommended by SAP, because it is easy to cause data inconsistency.
3. method in note:175960-> but report :RFSEPA02 and RFSEPA03 are not support since release 4.5A.
So if possible, suggest you to use 1.
Best Regards,
Gladys

Customized drill-down report cannot go to line item level (FGI4 and FGI1)

Hi Expert,
I created a customized drill-down report using New GL features, as follows:
FGI4 create form, with reference to form: 0SAPBLNCE-01
FGI1 create report for the form created.
After that I set some things like characteristic, variables, and output type.
When I execute the report, the data shown cannot be drill-down to line item level:
Goto > Line Item (this function is disabled).
Kindly advise why I cannot goto line item level, where I copy from standard form: 0SAPBLNCE-01, which ha sthe features of drill-down to line item level.
Thanks
sbmel

Hi sbmel,
For calling up a line item report in a drill down report you need to make the below settins:-
- You first have to generate the line item report with program RGRGENSI for your summary table.
- Then assign the generated line item report to the summary report.
Assiging the report is part of the 'Change drilldown report' function, which you reach by activating the characteristic selection field and then Extras -> Report assignment.
In the dialog box that appears, choose the 'Other report type' function and insert the line item report generated earlier, as an ABAP report
Regards,
Gaurav
Edited by: gka2707 on Jul 19, 2010 8:07 AM

Asset field blank in FS10N (Drilldown to line item level) report layout

Hi all,
i ahve posted a Retirement transaction to an asset and when i went to see the line item on the GL using/executing report FS10N for asset transactions GL and drill down to the line item level by double clicking on the period balances and I choose field "Asset" to be displayed in the layout, it is blank. How can I get report FS10N to display the asset number from the transaction?
the field is available in the layout but when i pull it into the report it is Blank in the report.
Any help would be appreciated. Thanks
Jay

Hello,
FS10N shows only balance, FBL3N shows the line details.
Add the asset as a special field via OBVU (Table: BSEG, Field: ANLN1).
Regards
Waza

Custom filed at line item level in order.jsp

Hi,
I want to add a custom material number field at the line item level that will search for the item related to the customer material number and populate the order.jsp.
similar to the below mentioned Standard functionality:-
In order.jsp when we enter a valid item no in the item text box
and press enter then the related data of the item is populated in order.jsp.
Is this possible ??
If yes please let me know how can we achiese this.

Satish,
the problem with product search is that ....
custommaterial number will be mapped with the item number for different customers in a separate table. so if i place the searc in proucts search tab it will fetch form product master.
so I was think of extending the process flow and from jsp capture the value entered and trigger action from there make a item search following the standard process.
but my problem is that I am not able to capture the value entered in the custom field when refresh is clicked?
can you tell me how is the item search done when we enter the item number and press enter?
please suggest

Substitution and activated the same at the line item level in order to subs

I have created a substitution and activated the same at the line item level in order to substitute the ZRSPL (Payment Block) field by a constant value and a vendor invoice is posted using Transaction FB60. But the same is not working. When I post a vendor invoice using FB60, Payment Block field is being shown as blank instead of the constant value which I want to substitute.
>
> My prerequsite is mentioned below :
> BKPF-TCODE = 'FB60' AND BKPF-BUKRS = 'ABC' AND ( BKPF-BLART = 'KR' OR
> BKPF-BLART = 'KY' ) AND BSEG-DMBTR > '10000'

Hi,
I am not understanding the logic behind the prerequisites mentioned in your query.
Payment block field exists only for vendor related line item. However, you have not mentioned vendor reconciliation account in the prerequisites. It means, this substitution will trigger for all the line items which is wrong.
Or try following options.....
1) Substitution->Simulation
2) Extras->Expert Trace
Best Regards,
Madhu

Line Item Level Coupons

Hello Everyone,
Are line item level coupons available where you tie a promotion to a particular item? I know you can set it up where if you buy A01 you get A02 free, but is there a way to set that up as a 1-to-1 ratio? Let me explain a little further... Our client has end users placing orders through distributors, so the distributor is actually placing the order. The end users apply and receive a promotion code when they sign up and place their first order (which must be done through a distributor). The distributor may combine these orders from end users into one large order, therefore for each A01 that is on order, they give away a bag of items free (let's say A02), to that customer but they want to capture a note with that promotion that it is for a particular end user. So, the question is, is it possible to track that only one promotion is given per one item (for each A01 on the order only allow the same number of free A02). Also, is it possible for each promotion to add a note that will designate which end user it goes to? Any thoughts would be greatly appreciated.
Thank you in advance for your time!
Kristen

Hi Kristen,
Do you still need help on this one?
I am no completely clear on what you are after.
When you set up a discount(coupon) you can limit the number of times it can be redeemed per user. Is that what you are after? Or is there more to it?
There is no "note" associated with this. Not sure what you mean by that.

Line Item Level Partner Determination

Is it possible to determine line item level payee partner based on product.
Please advise

Hi Mike,
I have a similar requirement at my current client. Where you ever able to figure out a solution for this requirement, if you did could you please share the information how you guys did it.
Thanks
Shajeel

Fixed Value Date at line item level is not in changable mode when copied

Dear SDN Team,
Hi i have a problem in the Fixed Value date at the line item level in the Return sales order.
The Problem is When creating the return order with reference to the scheduling agreement (10.03.2010). In the Return sales Order at the line item level the fixed value date is coping from scheduling agreement item (fixed value date eg: 31.12.2009)
But i would like to have the fixed value date in the return order as 10.03.2010 but the field is greyed out.
But normally when the sales document is created with reference to the preceding document the same will be copied. But field is greyed out and it is not in changable mode.
Can any one help how to solve this.
I have checked also SAP Note where i did not find any messages.
In normal scenario - when the order is created without any reference the fixed value date is in changable mode until the document is in open.
Pleas help me to resolve this.
With Regards,
Jai

Hi Lakshmipathi,
I am sharing the resolution which was done to this requirement.
We have a specific condition type with statisticaly used and with routine to have KWERT with zero value,
Based on the different key combination. We have a specific key combination for the SA and SDoc and for this we need to maintain a condition record for the condition type with fixed value date and which will be linked to only the specific document. Once this is done.
We need to do update pricing in the sales order for the particular line item. by doing this the Fixed value date will be changed in the particular line item.
Thanks and Regards,
Jana

FI Validation rule error message problem at line item level

Hello all.
I have created a step within an FI Validation rule (OB28) at the document line item level. I have set the message to "E" for an error. I have generated the validations. When I test my step, the error is triggered, but triggered as an Information popup - warning and does not give me a hard stop. Does anyone have an idea why this may happen? I need this to be a hard stop but not a cancellation of the document entry. I am using FV60 to enter my document.
Thanks for help.
mvp0821

OSS note # 863267 explains answer. Cannot create "error" message on ENJOY transactions - FV60 is included in this list. "E" works on classic transactions.
Thanks for thinking about this.

Reversing Picking at Line Item level

Similar Messages

Maybe you are looking for