Reversing the material document

Dear Friends,
PO is created with account assignment category 'K' and subsequently GRN is done for the full quantity in March'2008.
Some quantity is physically returned to storage location but not entered in SAP.
Now they want to reverse that quantity in SAP.
As opening the MM posting period is not recommended, unable to cancel the material document.
So please suggest me a solution to reverse that quantity.
Points will be rewarded immediately to the helpful answers.
Raju

Hi Sivakumar,
I am trying to understand better:
the matl doc created in March 08, for X qty and GRd.
Now some qty is returned to sloc in June Right ...
In this case, I would suggest you to create a physical inventory document for that material , and perform a adjustment of stock using 701 or 702 as appropriate.
By doing this you need not touch the matl doc created in march 2008.
I am assuming that, the mateiral is good and usable, or else, its better to create a return order and send it back to vendor.
Please reward if useful.
Please let me know if you need any ohter information too.
Thx,
MJ

Similar Messages

Reverse the material document before cancelling the excise invoice.

Dear Experts,
While cancelling the exice invoice thru J1iex , system is giving me an error message "Reverse the material document before cancelling the excise invoice" .......I checked PO history where all the material documents are already cancelled with MIGO cancellation (movement 106 )
But in J1iex , if I select the cancel option and put this invoice number , it is showing me one document with status "IN PROCESS" and if I select that doc and try to save it. System prompted me the message "Reverse the material document before cancelling the excise invoice ,but if I am trying to post this document system is issuing me a message "All Part I entries have been canceled for excise invoice ...........xx.Exicse table J_1IGRXREF and J_1IPART1 alrady update with both documents.kindly any one suggest me positive.
MINI

Hello
follow the below steps
1. MIGO:Cancel the material document (movement type 102) & during cancellation update part1 only. This changes the excise invoice document status to In process
2. J1IEX:Post the excise invoice referring the material document (of movement type 102). Creates an accounting document to reverse the CENVAT postings. Creates a corresponding entry in Part II of the appropriate excise register
Thus the excise postings are reversed.
3.J1IEX: Cancel the excise invoice (Do this if your plant does not allow multiple goods receipts per excise invoice).Now the system will allow you to cancel the vendor excise invoice
above the procedure right. you will get this updation excise registers also
Laxman

Wrong exchange rates ...How to reverse the material document.

Hello,
I have an issue with Exchange rates . By mistake we have entered wrong exchange rates in OB08 and created purchase order and done the goods receipt with wrong exchange rates after that we have corrected the same in OB08 later when we have done invoice receipt it has taken the new exchange rate which is correct.
Now i want to reverse the invoice document & Material document . When i have reverse the invoice document it has taken the new exchange rate.
Whereas when i am doing reversal of material document it not taking wrong exchange rate it is taking the present exchange rate.
Please advice how i can reverse the material document exactly with same exchange rates as it done for GR or How i will settle this difference amount.
Thanks.
Ashok

When i have reverse the invoice document it has taken the new exchange rate.
Maintain exchange rate in purchase order,Tick mark fixed,Reverse/Cancel invoice document it will reverse with p.o ex. rate.
Please advice how i can reverse the material document exactly with same exchange rates as it done for GR
Maintain desired exchange rate in OB08 for GR Posting date,Cancel material document
Also check
SAP Note 518114 - FAQ: Goods movements in foreign currency
Edited by: Jeyakanthan A on May 3, 2010 4:52 PM

J1iex cancellation -Reverse the material document before cancelling the exc

Hi ,
I am facing problem in reversing J1iex excise invoice .
OUR CASE is like
We have a purchase order of 100 pcs , against which a delivery of 10 pcs was made by the vendor.
1) At the time of J1iex Capture , user has entered 100 pcs (by mistake) as excise invoice Qty.
2) MIGO with Mtype 103 and 105 were prepared for 10 pcs only
3) J1iex was also posted for 100 pcs
Since there was a mistake while entering excise invoice qty in J1iex ,therefore we decided to reverse the entire process.The step followed were ...
1) Reversed the Material document (using 106 movement type)
2) Re-Posted the same excise invoice thru J1iex to reverse the Part-11 enteries
and now when I am trying to cancel the J1iex - excise invoice , system is prompting me an error message
"Reverse the material document before cancelling the excise invoice"
I hope, I am following the correct process.
Since the material document is already reversed therefore wondering why system is prompting this ERROR message.
Need your help
Regards
Shrey

thx

Error while cancelling the material document.

HI,
while cancellation of material document thru MIGO screen getting error
Deficit of PU IR quantity 20.000 EA
Message no. M7021
Diagnosis
Shortfall below the specified stock level or quantity amounting to 20.000 EA.
Diagnosis
Shortfall below the specified stock level or quantity amounting to 20.000 EA.
The invoice of material document has been process thru ERS.....so no way we can cancel the invoice.
waht is the exact process to cancel this document which furher use ERS for invoice verification.
thanks.....

Hi Ayaan,
You need to set the indicator against the movement type 102 under the following path :
SPRO>Materials Management>Inventory Management and Physical Inventory>Goods Receipt>For GR-Based IV, Reversal of GR Despite Invoice
Once set , try reversing the material document . This will work .
Regards
Ramesh Ch

How To Cancel the Material Document Created in VL09

Dear All,
I have a crictical issue,please guide me to solve this.
User has created the order and delivered on 31-03-2011,again he has reversed in VL09 on 07-04-2011.but the actual goods issue should happen only on 31-03-2011.Now when i try to deliver the same order on 31-03-2011 it's throwing error like defict of SL stock.I can't even cancel the material document that got created in VL09.I have to deliver only on 31-03-2011.
Kindy guide me to solve this.
Regards,
Venugopal

It is a mess! when the delivery is reversed, the user should have used correct reversal date. Now you can't cancel the material document. Consult MM specialist to add the quantity in the past period and off-set the same in the current period.
On a second thought, check with your accounting if you PGI in the current period as the reversal and new PGI happened in the current period, which off-sets the entry in accounting.If they are OK, then you need not bother about this.
Regards,
Edited by: Shiva Ram on Apr 7, 2011 11:56 AM

Mass reversal of material documents

Hi All,
We have MBST for reversing/cancelling trhe material documents. But how can we reverse/cancel the material documents on a mass basis?
In transaction MASS, there is no object created for mass reversal of material documents.
How can we create an object for mass reversal of material documents?
Is there any other Tcode or program for mass reversal of material documents?
Thanks and regards,
Ramachandra DN

Dear Ramachandra,
We Create
<b>LSMW</b> for <b>T.Code MBST</b>
I hope it is better way to use Mass reversal of Material Documents
Otherwise depend upon the size of the data we can move to other uploading programmees.
For better clarification you can approch ur ABAPers to resolve the issue.
With regards,
B.Ravindranath

Cancel the material document creation process

Hello Experts
I am having the requirement where i have to check for some custom validations before posting the material document. If those validation fail, material document should not be created.
i tried that by finding suitable user-exit or BADI for MIGO but it seems every user-exit or BADI gets fired after material document is created. What i am looking at is when we 'Check' the document it should also include our custom validations.
I have implemented the similar scenario for PO creation.
Thanks in advance
Regards
Rajeev

It is a mess! when the delivery is reversed, the user should have used correct reversal date. Now you can't cancel the material document. Consult MM specialist to add the quantity in the past period and off-set the same in the current period.
On a second thought, check with your accounting if you PGI in the current period as the reversal and new PGI happened in the current period, which off-sets the entry in accounting.If they are OK, then you need not bother about this.
Regards,
Edited by: Shiva Ram on Apr 7, 2011 11:56 AM

Reversing the accounting document

Dear experts,
kindly tell me that can we reverse the accounting document which is generated after invoicing the material to a customer,
Waiting for an earlier response,
Best Regards,
N.Kapoor

Hi Nirjhar,
After raising the Accounting Document there it self you will find CANCEL button. IF you want to cancel, select that CANCEL button or you can raise CREDIT MEMO.
If this is helpful assign me points.
Rams.N

CIN: How to check the material document posted without excise invoice

Hi Guru,
Please advise how to check the material document posted without excise invoice.
I have tried tcode J1I7 but it seems start to collect the excise invoice first and then material document.
But my case is to find the material document WITHOUT excise invoice for internal tracking purpose.
At the moment we start from tcode MB51 to get the list of material document and check in J_1IEXCHDR / J_1IEXCDTL
Best regards,
Pakorn

Hi,
Try creating a Query in Tcode SQVI by combining tables MKPF and J_1IEXCHDR/J_1IEXCDTL for your requirement.
Check these threads how to create Query.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/6018c1ae-8c44-2d10-6ea9-c3fad2c82880?QuickLink=index&…
http://ptgmedia.pearsoncmg.com/images/9780672329029/samplechapter/0672329026_CH03.pdf
Regards
Binoy

How can we find the Idoc number which posts the material document in SAP

Hi All,
How can we find the Idoc number which posts the material document in SAP. We could not able to find the IDOC number from the material document which was posted by Idoc.
Thanks
Chandru

Hi,
In MIGO you can go to service of object(Just above show overview) and check 5th option workflow you will find the idoc number.
regards
suresh

Reversing the CO Document.

Hello,
Overhead is calculated for 4.2% wherein the costing sheet it's maintained as 2.1%.. Requirement we need to reverse the original document which was posted calcuating 4.2% and post an other document
Document is a controlling doucment- Secondary posting, No FI posting is done.
Where can we reverse this document.
Regards,
Nitin

Hello Subodh,
Thank you.. but the transaction code which you suggested is not suitable for current scenario.
Basically, we have posted Actual overhead periodic.. transaction wherein the wrong overhead rate is taken, we need to reverse this document.
There is no FI document created, only secondary document is created.
Regards,
Nitin

System Lock Error while reset & reversing the cleared document - FBRA

Hi Experts,
Currently using t-code FBRA, when user trying to reset & reverse the cleared document , they are facing "System Lock Error". We have analyzed on this issue and found SAP note no. u201C487347 u2013FBRA: Overflow of the lock table in production systemu201D . After implementation of this note, SAP has created one new transaction code, FBRA_LOAC.
However, when we tried to reset & reverse the cleared document using t-code FBRA_LOAC, we face the same error.
Can you help me to resolve this issue ?
Thanks in advance.
Regards,
Manish

Hi:
We once faced these issue and got it resolved by extending parameter after extending the profile-parameter "enque/table_size", as per note note 13907. Do not forget the restart the server after extension.
Regards

Reversing the cleared document

Hi experts,
My client posted a wrong transaction in PRD system considering the Cheque Deposit Account instead of Cheque Payment Account while making a payment. After this the transaction became cleared item, now when he is trying to reverse the document system throwing up an error saying "Document is cleared, not possible to reverse". Please could you suggest the way to reverse the cleared document.
Nanda

HI
For reversal of cleared document we have to follow the below step
1.Reset the cleared fi doucument in Transaction Code FBRA
Enter the Cleared document No ,Company code & Fiscal year then hit the clearing icon on the top press the reset the cleared document then the document will be reset
2. Check the status of the document in FBL1N it should be uncleared
3.Reverse the document in Transaction Code FB08
Enter the UnCleared document No ,Company code & Fiscal year then reversal reason ,posting date & Posting period then hit the document icon on the top press Post then the document will be reversed
Hope this will be usefull

How to Reverse the clearing document & cancel the invoice

Hi gurus,
Can any body tell me how can i reverse the clearing document?
what happen i had wrongly put up the customer invoice with the special GL indicator (Advance from customer) & i had clear the invoice & special gl balance.
Steps which i follow:
F-29 - Customer Down payment
F-22 - Customer Invoice
F-28 - Customer Incoming Payment
F-39 - Clear customer down payment
F-32 - Clear customer payments
when i tried to reverse the document (T.Code FB08) which give me error that reverse the clear line item.
Please help me to overcome this issue....
Than'x,
Dhananjay R.

Hi amit,
Than'x for given attention. actually i tried this T.code FBRA, what happen which reset the invoice & clearing document.& i see the customer / vendor invoice as open item in display. when i tried to reverse this entry which is wrongly inputed in the system which i want to reverse. while reversing this entry again i see the balance of clearing document in the customer / vendor balance display.
i couldn't understand how to cancel this entry from the system?
Pls suggest me to overcome this issue.
Than'x
Dhananjay R.

Reversing the material document

Similar Messages

Maybe you are looking for