Reverting back from the iCal CalDAV Beta
Upgrading to the new Ical CalDAV Beat, I have lost the ability to collaborate with with co-workers using Outlook 2003. They can not add my calendar events. Also, their calendar events are not longer automatically added to iCal.
How can I revert back from the iCal CalDAV Beta so everything syncs well and I can collaborate with non OS users
Yes. Just look at the posts to the right ------------->
More Like This
Similar Messages
-
2006 iMac running 10.4 OS. I copied files to ext. drive. Put in 10.6 disc and did a clean install (format) of 10.6. Copied data from ext. drive back to Mac. I didn't get all the files. CAN I REVERT BACK TO THE 10.4 OS SO I CAN COPY MY DATA PROPERLY?
How did you copy files to the external drive, and what files did you copy? Did you drag and drop in the Finder? Use a clone utility? What files did not successfully copy?
If you reformatted the drive as part of your install, then you won't be able to recover any files from the drive. Reverting back to (reinstalling) 10.4 will not help you.
Do you have a complete-drive backup of your old system?
Matt -
When I stream videos from my laptop onto my Apple TV via my iPad 2 using the Air Video app/server the video plays great however when I pause the video the Apple TV reverts back to the home screen within a few seconds and then when I want to restart watching the video I have to re-buffer the video. Is there any way I can stop the Apple TV from reverting back to the home screen when I pause the video I’m watching?
Welcome to the Apple Community.
Contact the developer of the Air Video app. -
I am unable to download from either the App Store or the iTunes Store. When I get to the download button - it reverts back to the beginning. All my settings are good. There is no error message. Does anyone have any ideas? (I also tried shutting down) Thanks, in advance.
Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430 -
I need to get out of the Beta 7 and revert back to the version 6.
I need to get back from the beta 7 to the version 6.
link in step 1 above only offers version 7. how do I get back to 6?
-
When I edit a song in itunes (i.e change the year) on purchased songs, the next time I return to itunes, the information has reverted back to the original information. How can I change that?
When I purchase ITunes music, and it is a song from a Greatest Hits album, the Year of the song shows the year the CD was released and not the year the song was released (i.e. a song may be from 1986, but the Greatest Hits album was released in 1999, so my songs in ITunes show 1999). So, I go into each of those songs and change it to the year that I want to be displayed. As long as I don't exit out of ITunes, it will show the year that I changed it to (i.e. the 1986 year in this case). But if I exit out of ITunes and then return to ITunes, the year reverts back to 1999. The same happens if I change the genre of a song from, say 'Pop' to 'Alternative', it will revert back the next time I log in.
Oddly enough, as soon as I right-click on that song to change it back, the year/genre that I had entered returns.
How can I make it so my changes are permanently displayed as I want them? This is pretty annoying when I try to find a song on my Ipod under a certain genre, but it doesn't appear in that genre because the incorrect information gets synched to the Ipod.Make sure that these two options in Edit > Preferences > Store are turned off:
Then exit iTunes and open it up again. Your metadata entries should then be persistent - with these options checked iTunes will be comparing what you have with the information held in the iTunes Store, and will overwrite with the latter for Store purchases (and if you have iTunes Match). If you have any iOS devices you should also turn off Show All Music under Settings > Music. -
How to revert back to the old code in NWDI ??
Hi,
I have done some changes to one of the DC and have released the activities and imported that in consolidation tab in transport studio of CMS.
Now my client do not want the changes we did, and he is asking me to revert back to the code that was prior to my changes.
I want to know how to do this in dev. and Qa system, as we have moved our changes to QA also.
What i have done is, i went to consolidation tab (in transport studio), i, went to "go history" and i have selected the activity that was imported to consolidation just prior to my activities, and than i clicked on import button. and than i went to assembly tab and i assembled that activity.
than i went to Qa portal, but still its showing my changes only, its not showing changes that was made prior to me.
What i m missing here?? and how to restore old code in dev and Qa system ??
please help
regards
vikasHI,
you can get back the changes done in an activity as a local copy in the following way:
go to CBS web UI, click on compartments link'
under that search for your DC, and click on view all link.
you find all the activities under that DC. copy the integration time .
switch to DTR perspective,
righ tclick on the DC, choose Advanced sync, sync to date, give the integration time you got from CBS and click on ok.
Regards,
Satya. -
I have recently updated the iTunes in order to update both my iPhone and iPad to ISO5.0. unfortunately, after the updated, my iPhone is no longer playing any music. whenever i go to play music on my iPhone it just reverts back to the playlist or it keeps running through song to song. But still, no music is on.
I tried to re-sync the music library, error mesage prop up,
"The iPhone 'xfdsarw' could not be synced because the sync session failed to start"
I delete the iTunes and download it again. Then, I restore my iPhone to the version before ISO 5.0. After, I do the updated again. However, the problem still exists. What should I do? Please advise. I cant believe that iPhone cannot play iTunes!!!!
How come, apple acts like Microsoft? I saw this problem had existed in the developer stages back to the past summer. Then, you guys didnt fix it before the release of ISO 5.0. Hopeless. As being a life-long apple fan, I am so disappointed! Wordless ....My music can be played in my iMac and iPad itunes, but not my iPhone4.
i did what you have suggested to unsync the music and then re-sync again. should i try to cancel all the music in the library and then restore them again. can it work? i dont want to bet coz reloading so much music is very trouble. -
I have Lion 10.7.2 and use Safari 5. When I get online and open a website, then go to a new website Safari will take me right back to the previous site automatically. I have reset Safari and there is not an issue with the interenet access. Went to the Apple Store and the same issue happen. Example: Logged on and went to homedepot.com, after looking at the website, I went to weatherunderground and was taken right back to homedepot.com.
Checked, updated Flash, still the same issue. I am now starting to loose emails. I could be in the middle of typing an email and I get reverted back to the previous website. Does anyone have insite as to what is going on or has Safari 6 fixed some of these bugs that are going on? I can't take much more of getting thrown back through my previous web history. Thanks.Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up guest users” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem(s)?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled, or if a firmware password is set, you can’t boot in safe mode.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2. -
Every time I open an app it reverts back to the icon screen
Every time I open an app it reverts back to the icon screen after a minute or so, sometimes almost immediately. Any ideas about what is going on? I have both wifi and 3G so I don't think it is an Internet problem. Thanks!
Try a hard reset first. Press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
If still no luck, try downloading and installing a new app from the App Store. Doing so has cleared the issue up for several users.
B-rock -
AGP 400 G4 back from the dead... and needing another HDD and a USB2 card!
Hello!
Well, my old 400mhz Sawtooth G4 is back up! OMG! It's so much faster than the old 400mhz iMac DVSE (G3) from the same year - and I don't know if that's due more to the processor, cache, or video ram, but i'm not complaining!
I have a WD hard drive that's currently installed in my iMac - an 80G, EIDE drive. Inside the G4, I currently have a 60GB Maxtor drive (that I removed from the iMac a while back). I need to put the HDD in - but seem to have a problem. if you've ever seen the HDD sled that the the original HDD comes in - you'll notice that it is, for lack of better term, a double-decker sled. There's a lower "slot", if you will, that contains one drive - attached using the screws on the top of the HDD. There's also a second "slot" above that appears to need me to screw in this HDD using screw holes on the side! This would be fine - except that this sled bumps out on one side about 1/4" - so I'd need very long screws to install the HD - I don't have them.
Here's a picture: If the HTML won't work here, just visit the site.
http://i31.photobucket.com/albums/c384/digidan/G4-HDD-annotated.jpg
I realize it's a bit difficult to see, but it's the best I have at the moment. See the circled screw, and how it's "bumped back" from the rest of the sled? Also note the short IDE cable.
There are other drive bays to towards the front, but the installed IDE cable only has enough length to reach this top bay. In addition, the ATA/IDE cable that came with the WD Drive is not long enough to reach to the next bay over. There's got to be something I'm missing. Next to going out and buying an ATA controller, there must be some way to use a second drive.
Ideas?
Secondly, I need to find a USB 2 PCI cad. I've heard that you just need to make sure that the card box says "Mac" on it somewhere. Our local best buy has a 2-port card for $30, and CompUSA has a 4 port for $40, both specifiy work with Mac. Is there a place online that has these cards for less, but is not ambiguous about OS?
Also - would a USB 2 PCI card slot give put out enough power to use a USB thumb drive, or charge an iPod?
Thanks, and let me know if I didn't make that clear!
-Dan
15" 1.67 Powerbook G4 (Jan 2005), Slot loading 400mhz iMac DV SE, Mac OS X (10.4.8) 4G Clickwheel and 5G Vid iPods, 400Mhz Sawtooth G4 (work in progress)If you're only going to have (2) hard drives
installed in the G4, you'd be better off moving one
of the single drive sleds to the dual-drive stack
bracket's position. Sonnet's "TCB-AGP" ribbon cable kit, includes custom-made
cables having adequate spacing between the two drive
connectors, allowing them to be mounted side-by-side.
This eliminates heat issues caused by placing one
drive on top of the other, preventing the
dissipation of heat generated by the lower drive.
True, and a pretty good idea, but I don't want to pay $30 just yet - I'll be back in texas (and to a Fry's Electronics store) by thanksgiving - So I'll have a bit of a... shopping list Since they have pretty much every concievable type of component you can think of, I'm sure they'll have some cheap, individual ATA cables I can make work. Is it just a standard ATA-66 cable? I suppose ATA 133 is backwards compatible too, considering the 60 Gig drive is ATA 133! (who knew?!)
As per the "long screws", I misunderstood what you were trying to say, and the way it was supposed to be mounted. I thought that it was supposed to be mounted from only one side! Needless to say, this didn't make sense. I didn't realize that the left side of the bracket actually bends in like that - neat.
So, all that's left now is to get a USB 2 card. OWC has an Iogear (http://eshop.macsales.com/item/IOGEAR/GIC251U/) card that looks good - does anyone have experience with this card and the sleep issue? I realize that it's a rather random problem, so there's no way to know for sure whether or not it will have probems, but I'd like input on it if anyone has some.
And I STILL think internal USB/FW ports aren't much more than a gimmick.... I have yet to see a "Internal USB device". Oh well, I suppose it's good to have if/when it's ever needed.
Thanks,
-Dan -
Apple TV won't play back my album images from IPhoto in the edited order I want. The order seems to revert back to the time stamp for the photos. I have combined the photos from 3 different cameras and they had slightly different clock settings. I am working on an edited presentation of about 1500 Pics from travels in Turkey this summer and sometimes the order makes more sense if I move some of the images quite a ways. Is there any solution short of changing the time stamp on every single image?
Using the 'adjust date and time' setting is the best way to syncronise the photos from all your cameras. However as you say this merely puts them all in the correct order chronologically.
If there are photos that you feel would be best somewhere else in an album other than in date order, it may depend on how many as to which is the best option for you. If it's only a few you may wish to adjust the date/time on these few manually so they fit in with the rest where you want them.
If you have a lot of photos you want in a different order to the order by date, or you really don't care about what date/time is used and just want them in the order you want them in, then 'batch change' is the best option.
From the view menu, select 'sort photos - manually', drag the photos around until they are in the order you want, select all of them. Now select the batch change option and choose 'Date' from the 'set' options, type in a date and time for the first photo, it can be anything but it's probably a good idea to choose something close to the original date, then check the box 'Add'. You can keep the value set at 1 minute or enter any value you want, it may be more realistic to divide the length of your holiday by the number of photos you have to calculate a value, but it really isn't necessary. Clicking OK will adjust all the dates without affecting the title or description and the photos will now show on the Apple TV in that order.
Just to be sure iTunes is updated, you may want to go to the advanced menu/choose photos to share in iTunes and deselect the album, apply, reselect the album and apply again. -
Numbers 3.2 has changed too much, it doesn't work with my project anymore. 1) The sheet panels used to be on the left hand side and easily reviewable and searchable, but now they are on the top and it's harder to find a specific folder without scrolling (too time consuming), 2) I used to be able to duplicate a folder within my sheet panel window by simply clicking on a folder and hitting Command D, but that doesn't work now so it looks like I'll have to spend even more time to recreate the same tables that used to be easily duplicated, and 3) I can't choose fill colors that matched my project anymore because there are only limited choices available now. And these are only the changes that I'm aware of. I am very disappointed and frustrated. Whatever the motivation was to limit Numbers 3.2, I want the previous version back. How do I revert back to the previous version I was using?
The sheet panels used to be on the left hand side and easily reviewable and searchable, but now they are on the top and it's harder to find a specific folder without scrolling (too time consuming),
You can scroll more quickly between sheets if you don't use the left-right triangles, but instead move the cursor up into the bands with the "tabs" and drag right or left.
Also, if you have a lot if sheets for which you want a quick vertical list, then you can try the following have something like this pop up (showing your sheet names automatically) whenever you hit a keyboard shortcut (in my case shift-command-j):
This is done via a Jump to Sheet Automator Service (Dropbox download). To install just doubleclick the .workflow package and (if needed) click 'Download Anyway' in System Preferences > Privacy & Security.
This will cause a new item to appear in your Numbers > Services menu. Then, if you want a keyboard shortcut, go here in System Preferences and add one:
You can rename or remove the service by holding down the option key in Finder and choosing Go > Library > Services. You can also view the AppleScript contaned within the service by opening the .workflow package in Automator.
This particular service jumps to the first cell of the first table of the sheet you choose from an automatically generated list of all sheets in the current document.
SG -
I recently installed the trial version of Adobe XI and the trial period ended, so I wanted to revert back to the version I already had. I did not see any uninstall feature and my old version was apparently replaced by the trial version. I cannot re-install a previous version b/c I need both a product Id (GOd only knows where that is now) and a way to uninstall the trial. Any ideas?
When you installed the trial, there should have been an option to have ignored your current installation and leave it. Apparently you skipped that case. To uninstall the trial (in Windows) go to Control Panel>Programs & Features and select the Acrobat XI and choose uninstall. After the uninstall run http://labs.adobe.com/downloads/acrobatcleaner.html to clean up your system. HOWEVER, if you see your old Acrobat in that window, do not run the cleaner, but do a repair on the old version.
You did not mention the old version you had. You might try from http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html. As for the S/N, you should have register and if so you can get it from Adobe. The instructions are at http://helpx.adobe.com/x-productkb/global/find-serial-number.html#adobeproductdownload.
Be sure to backup any download of the old installer and the S/N to CD or backup HD for future use. They will not likely continue to be available. -
My Iphone will not revert back from silent mode. It will play when i am scrolling through ringtones but when a text or incoming call comes in it just vibrates. Anyone having this issue??
I have the same problem with my iPhone 5c after update to iOS 8 every time i have to restart my phone to solve the silent issue
Maybe you are looking for
-
HP Officejet 6210 All-in-One, print custom sized paper
I need to print on size 3 3/4 x 8 1/2 paper. I click on custom size, then format the size, but it always reverts to 8 1/2 x 11. They suggested I go to the chooser to choose the Officejet 6210, but it is not one of the choices. Is there another cho
-
Commitment Value after partial GR
Hi All, Anybody have idea for below given scenario. Query on Commitment cost Eg: PO issued with cost of 1M USD. Based on current rate of 1.3, Commitment shows in local currency 1.3M SGD 6 months later, 80% of PO can be GR. 80% *
-
EEA2 Employment Workforce Analysis report, SAP ECC 6.0
hi gurus I need to do config so that I can have all the new engagements/exits/promotions in each month on the report when it is run. I went to table t5w10 which is only for category options ans salary levels. how do I configure this on SAP so I can h
-
Usage question about Default Display Value based on calculation
Hi, I read on page 3-70 of the devguide about using EL for Default Display Values. I want to something similar as the defaultSalaray based on some kind of calculation. There is stated to store the value on the request or session (request is fine for
-
create or replace TYPE NUMTABLE AS TABLE OF INTEGER; i've a function in EQUIP_PKG package FUNCTION Exists_In_Numtable (p_target NUMBER, p_list NUMTABLE) RETURN boolean IS v_found boolean := FALSE; BEGIN FOR i IN p_list.FIRST .. p_list.LAST LOOP IF p_