Reverting back to PAGES after exporting as PDF

I created a document in PAGES and exported it as a PDF. I found errors and need to put it back into PAGES to make it editable. Is this possible? If not should I find the original PAGES document in my TIME MACHINE?

There are apps available on the Mac App Store that say they can convert PDFs to Pages. Here is the result of a search I did on AppShopper.com. There are fewer listed in a search on MacUpdate.com, but most of them do allow you to download a demo.
I've used PDF to Word on several occasions with good results. I had gotten at a discount some time back. I see that the same developer has a program that can convert PDFs to multiple formats. You can download a demo from their website.

Similar Messages

SSRS Table/Row Header does not repeat on every page when exported to PDF

Hi, I have a SSRS Report in which the rows are grouped and the Tablix has a Table/Row header. I wanted the header to repeat on every page for a group because sometimes the data from the group would be more than one page.
                               To achieve this
                              - I went to Advance mode by clicking the arrow next to column group
                              - Selected the Header Static column from Row Group
                              - Changed the following properties
                              - KeepWithGroup: After
                              - RepeatOnNewPage:
True
                              - The header columns
are set to not grow.
The problem only occurs when the nested grouped data in one of the columns goes over a page. The following pages don't have any header.
So half of the time the header row repeats but when the nested grouped data extends over one page the header does not show. Problem only occurs when rendered to pdf.
I found this line "Headings are repeated on each page only if there is sufficient room" in SQL 2008 version. But I could not find it in later versions of sql server. So does that mean it is fixed

Hi Mumblesnz1,
According to your description, you specify value of RepeatOnNewPage as True in the report. When exporting the report to PDF, one grouped data extend over one page, and tablix header display on first page, not repeat on following pages.
As we tested in our environment(SQL Server 2008(SP3)-10.0.5520.0(X64)), it works as you required. We set KeepWithGroup as After and RepeatOnNewPage as True. After exporting to PDF, the grouped data display on two pages, and tablix header repeats on each
page. Since we haven’t found any document mentioned this issue is fixed on which version, I suggest you try to install the service pack 3 for sql server 2008.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu

Hyperlinks from other placed indd documents or pdfs getting lost after export to PDF

after upgrade vom CS 5.5 to CS 6: hyperlinks from other placed indd documents or pdfs getting lost after export to PDF
I tried all options for the as well known and working export options

after upgrade vom CS 5.5 to CS 6: hyperlinks from other placed indd documents or pdfs getting lost after export to PDF
I tried all options for the as well known and working export options

Can I revert back to lion after mountain lion download

can I revert back to lion after mountain lion download

You actually can. If you call in to apple and ask for lion, they will email you an app store code that can be redeemed.
Apple's number: 1-800-275-2273

Failed to display CR after export to PDF in Browser

Post Author: asnila
CA Forum: Exporting
Hi,
I had a problem to display CR after export to PDF in browser. No message error displayed except the browser is blank.
Below is the code that i had been used.
Dim RptFilePath As StringDim RptExportOpt As CrystalDecisions.Shared.ExportOptionsDim ExportLocation As New CrystalDecisions.Shared.DiskFileDestinationOptionsDim ExportPath As StringRptFilePath = "C:\Project\reportPro.rpt"myReport.Refresh()myReport.SetDatabaseLogon("root", "", "localhost", "dbpro")ExportPath = "C:\Project\reportPro.pdf"ExportLocation.DiskFileName = ExportPathRptExportOpt = myReport.ExportOptionsWith RptExportOpt.DestinationOptions = ExportLocation.ExportDestinationType = ExportDestinationType.DiskFile.ExportFormatType = ExportFormatType.PortableDocFormatEnd WithmyReport.Export()Response.ClearContent()Response.ClearHeaders()Response.ContentType = "application/pdf"Response.WriteFile(ExportPath)Response.Flush()Response.Close()MyConnection.Close()
Fyi, i'm using Crystal Report 10 embedded with VS 2005. Please help me.

It looks like the 2 DLLs you mentioned, are getting corrupted or modified due to some operation that might have been performed on them. Can you please try the below mentioned instructions and see if that gets your application to install without any errors:
1. Try installing your business app.
2. When you see the error message as stated, try running the below mentioned commands: (Start | Run | Type cmd and hit Enter)
    regsvr32 LTKRN11n.dll /i /s
    regsvr32 LTKRN11n.dll /s
    regsvr32 LTDIS11n.dll /i /s
    regsvr32 LTDIS11n.dll /s
3. The above commands should fix the issues in the mentioned DLLs and allow normal installation of your business app.
Hope this gets your app to work and install properly.

Pages crashes after exporting to PDF or .doc

This is a problem now that it happens everytime i use pages.
I'm working on a document and then I go to save a PDF by either Export in the File menu
or by choosing "save as PDF" in the printer dialogue
after it saves the PDF as soon as I go back to the pages doc the app crashes.
and asks me if i want to reopen cancel or send a report - which i have done.
this also happens if i save as .doc
maybe i have to reset the app?
this is making pages unusable unfortunately

There used to be a reproducible crash in the past with a footnote, if you deleted the text referencing the footnote without deleting the footnote and then printed/exported to PDF. However, that problem is gone in the latest versions, as far as I can tell.
Apart from that, I do not know of any definite crash scenarios.

Indesign CS4 button flashes after exported to PDF and viewed in Acrobat Reader/Professional X

Hey everyone,
Greetings!
I've encountered this odd problem when preparing my portfolio.
I've created some 40 buttons in InDesign CS4 (all according to the official tutorial) to Show/Hide Fields (specificly images), and navigate through the pages.
The buttons all have their own Normal and Rollover states, but no Click states.
After exporting the file to PDF, I tested the buttons in Acrobat Reader 9 and Acrobat Pro 9, and both the actions and the states worked fine.
BUT that's not the case with Acrobat Reader X or Acrobat Pro X.
The actions are still there, showing the images and navigating, but the states are not!
The buttons' rollover states just flashes when the mouse hover above them, and even in Normal state, they kept *blinking* randomly.
Frustrated for a week.
PS. I suspected and used a Indesign file with only one simple button to rule out the following:
1. Overlapping buttons
2. Slow processing due to large image size
3. Mishandling of transparency
At this moment I'm pretty sure it's an Acrobat thing...Help!

Thanks Dave! I was in the middle of writing this when your post came in:
Not sure if this will help anyone, but I changed the button fill color to white and it seemed to fix the flicker. I exported each state from indesign as a PDF and recreated the button from scratch. This still had the flicker. I'm guessing something strange is happening with the transparancy of the states.
Glad to hear it's fixed!

Photos blurred after exporting as pdf

Hi,
after exporting my pages-file into pdf, one of the photos is pretty blurred. Can anyone help, please?
Thank you so much!!
xx
pavinova

I am no Pages expert but I got the blurring when tried to reduce the file size either by Pages reduce file size (Pages 5.5) or selecting the Good or Better output (Pages 09). I got better results when reducing all photos outside of Pages using a graphics editor. I used Graphic Converter and got good results but am sure other apps (Photoshop etc.) work well too. Try with all settings at best quality and see how the pdf looks then. You should be able to get a pdf looking as good as the Pages file.

Renamed Service Request List Items revert back to originals after an upgrade.

For two upgrades now (From RTM to SP1 and from SP1 to R2), lists that were changed from their defaults in the service request form have reverted to their defaults after the upgrade. Has anyone seen this behavior with their upgrade? I used the
unsealed MP that stores the new list items and changed ones, to revert the lists back but I would like to know how to avoid this for the next upgrade.

Misha, 'what could break' is entirely dependent on what else is in that management pack, but displaynames are relatively innocuous. As long as you export (don't DELETE it, just export it) then re-import that same MP, it
should be safe, but I'm not familiar with what exists in that MP.
Stefan, "IsDefault" doesn't seem to make a difference. I have IsDefault=true for all of my ENU language packs (and that's the only language pack I have). But after an upgrade, my custom displaynames are still wiped out. It was likely the re-import
that reapplied your displayname changes.
One of these days I'd like to confirm this behavior :)

Indesign to PDF. Logo appears blurred after exporting to PDF.

I have a png and jpeg logo that appears fine in my indesign doc but when I export to PDF the image is blurred and has a white line around the logo edge as if the image is bleeding into the page.
The png and jpeg logo file (I have tried both versions) is 4x4 inches and 300 dpi. I am a loss at to what the problem is. I have tried smooth line art in the Adobe preferences.. but nothing works there.
Is there a standard setting for Indesign and Adobe (in terms of output) that would help resolve this issue.. ? Any ideas greatly appreciated...

Hi. Thanks for stepping in with some advice. I'm actually exporting at print quality so avoiding the low resolution pdf issue but the logo has a transparent background and is a png file. Would it help if I resaved it as a vector file? Any further advice would be welcome. It looks 100% fine in Indesign but just my exporting to PDF makes the logo look terrible. Thanks again..

Some Two-page Spreads export to PDF/Blurb with Errors

Hi,
I have created a Blurb book in default portrait format.
Some of the two page spreads (sample: first two images in portrait format, third image squared on the top right) do not export correctly. The second image, the one, which will be on both pages, will be slightly smaller on the left page, than on the right page (both on Blurb and PDF export). Sadly, those two page spreads are useless for now
LR4 release versions, no updates available as of now.
Took me just three hours to upload the book and see those same errors in the Blurb preview :/
Regards,
Daniel

You can use a multipage importer to import a single Page PDF into InDesign.
Create a single page PDF
Create a facing pages document the same size as your original file
Multi-page place the entire pdf into facing pages (automatically done by script)
Export entire book to PDF as spreads.
http://indesignsecrets.com/zanelli-releases-multipageimporter-for-importing-both-pdf-and-i ndd-files.php
I say to do this with a singe pages PDF - because I don't think it will import multiple InDesign files, you'd have to place them individually - and with my experience it takes longer to import multiple indesign files - so I just use a single pages PDF.

How to change element in many pages and export to pdf?

Hi guys!
I've got a lot of Pages files with some text and graphic in the footer.
I'd like to change this footer in all of them instantly and then export modified files to pdfs.
Is that possible?

I've tried but chosen not the best way..
That's how I do it:
1. Opening few Pages files (with editable footer)
2. Copying every single pages to one Pages file.
3. Editing footer in all of them instantly.
4. But I'm exporting edited pages as one big PDF... And I want to export them seperately of course.
Any idea how to do it fast and easy? Working with 100 files is real pain.
Thanks for any help!

Unwanted Anti-aliasing after export to PDF!?

Dear comunity,
First of all let me say, that i am relatively new to indesign,
this is really driving me crazy: my boss gave me the task to renew our business cards (no new layout, just different names and addresses.) So i took the indesign file my predecessor made and switched the names and contact information. The indesign file contains three back sides for three different people, every one with their own QR-code.
I made three new QR codes, deleted the old ones and brought the new ones in. (the codes were originally PNG, i put them in Photoshop and exported as PSD, since i heard, that i should use PSD files in ID instead of PNG or JPEG.)
When exported to PDF, two of these QR codes are working just fine, the third one has the following problem: On the edges of the code, thin light gray lines appear, for my untrained eye, these look just like anti-aliasing. These do only appear in the exported PDF, not in Indesign itself, and only in one of the three QR-codes, though i created and imported them all the same way.
I should probably mention, that i made the codes 50% transparent. I already did lots of research regarding that problem, and one person said, that this is a bug, which has been solved in ID CC 2014, so i updated my ID to that version, imported the corrupt PSD anew, still the same problem.
What did i do wrong with this particular PSD file? Might there be a button or something, when i have the psd selected in iD, that toggles AA on and off for that particular file??
I added two pictures. the 1st one is one of those, who don't make any problems, the second one is the one, that has the unwanted anti-aliasing (or whatever it is). I just made screenshots out of Acrobat, because this forum wouldn't let me upload The PDFs. As i said, they both come from the same ID file, exported the same way.
Thanx in advance for all your kind help.
Nigi

Thank you Willi, one more question,
You are saying, i down sampled with the wrong method. So what would be the right method? I just drag and dropped the file and placed using the placegun thingy.
Just asking for future projects, this particular problem will be solved by the internal QR-editor, i'm sure.
Boy that whole print-stuff is a whole new area for me, there's much to learn, so i am very grateful for people like you, who take their time to help a poor autodidact...
Thanks

BI Reports printing in BI 7 after exporting to pdf

Hi all,
I have an issue with regard to prinitng the Reports in BI 7 after we do the export to pdf format.
the users want to combine all the reports into one PDF file when printing?
If so, is there any such standard functionality in BW or else what could be done to achieve this.
pls advise...
thanks in advance
Neel

Hi,
what about creating one webtemplate with several webitems "webtemplate".
So you can execute each report, but can print ~20 webtemplates via the master template to one pdf file.
Kind regards,
Tobias
Edited by: Tobias Haas on Aug 30, 2008 3:48 PM

Change in report format after exporting from pdf format to excel format.

Hi,
I got a problem while exporting the pdf format of the Report to Excel format "Fully-Foramtted Grids and Texts".
The format gets automatically changed.
Is there any solution to this problem.

Can you give some more details?
Which version are you using (and which patch level - if any).
Also what formatting is default on the reports and what is the default format in excel.
What exactly is different between PDF and excel?
Another possibility is that font substitution is going on??

Reverting back to PAGES after exporting as PDF

Similar Messages

Maybe you are looking for