Reverting to no login necessary and problems with keychain

For some reason I don't understand, my iMac now requires me to log in even though I'm the only user. First that happened, now there's also an Other account.
My Keychain has me locked out. My password doesn't work. Isn't it possible to reset the password for it?
This is a lot of problems to be having on such a new computer

Replacing the SIM card necessitated restoring the software and all of the applications I have purchased.
The applications would not wok with the new SIM card. During this process I lost all of my application preferences and info (like scores in games I was playing) and all of my sent mail for mail accounts other than mobile me even though I have backed up the iPhone completely before the restore. A lengthy process with a frustrating ending.

Similar Messages

Any new about updating lion to 10.7.4 and problems with bluetooth devices like Bose Soundlink Bluetooth Speaker?

Any new about updating lion to 10.7.4 and problems with bluetooth devices like Bose Soundlink Bluetooth Speaker?

Monroe
Just in the moment i updated to lion 10.7.4 my Bose Soundlink Bluetooth stop working as good as it was. I´m gonna try the update in the Bose web page. I hope it works

Choosing between external and partner application and problem with login

We have an application on Oracle App Server 10.1.3.3 and we have an OID server.
I had taken this for granted that I should define the application as 'Partner Application' and not external application for single sign on.
Now that we need the 'PASSWORD' retrieved by application, we are considering defining it as an external application.
There are at least two problems I have encountered defining the application as external:
1. 'pageConfig:serverDate' is among the login form's inputs in the login page, but I can't set it in orasso 'Edit External Applications' page
2. After login using SSO as external application and when I click on the application's new link, the login page is shown with the username and password field filled, but I have to click on login button anyway (no automatic and invisible login).
I will be very grateful if someone gives a general view on the differences between external and partner, whether in this case external has to be used or partner and finally give some comment on my specific problem with login button and manual login.
Thank you

Just some information :
- The problem with LOGIN page exists. I don't have that problem with for example GMAIL when defined as external application, but with my applications in Oracle Application Server.
- There is also another thing I don't understand. The link to external application is something like:
javascript:open_jwindow('../ealogin?ID=76D4766','76');
and couldn't be executed outside pls/orasso
in other words we can't give that to our users, can we? They should login to orassso and see that?
We don't want to involve them in Identity Management...
Any help is appreciated....
Regards

MobileMe Gallery and problems with new password

Hi. I'm using iPhoto 09, and have posted many MobileMe galleries over the years. Recently, I changed my MobileMe password. Now, iPhoto tells me that an "error occurred with the publication of album 'XYZ' Your MobileMe account information is not correct. The provided login or password is not valid" and it prompts me to return to MobileMe Preferences to re-enter my correct login and password. Well, the trouble is that I've done this many times. (Which also causes sync problems - but that's another story.) And though my System Preferences are now correct, I still cannot successfully update a MobileMe gallery in iPhoto. I checked my settings in the Keychain, and all is fine. I also trashed iPhoto preferences, but the problem still remains. Any thoughts on how to solve this irritating problem? Thanks!

I found another solution based on this posting.
http://forums.macrumors.com/showthread.php?t=689762
Works perfectly.
+I have the same problem and started a thread about it on Apple's discussion board, see http://discussions.apple.com/thread....art=0&tstart=0+
+First, I'd suggest sending Apple feedback on it (select "Provide iPhoto Feedback" from the iPhoto menu).+
+When you change your MM password, you need to enter the new password in MobileMe in System Preferences. When you select MobileMe in System Preferences, it will (correctly) say that your password has changed and ask for the new one.+
+It looks like the problem with iPhoto is that when you enter the new password in MobileMe preferences, the keychain entry for it isn't being updated. Look for publish.me.com in Keychain Access. It will probably have the old password. Changing it there and then signing out/in in MM System Preferences seems to fix the problem with iPhoto. If not, try deleting publish.me.com in Keychain Access and then sign out/in to MobileMe in System Preferences.+
+Give it a try and post what happens.+
Jay

Windows Server 2003 and problem with SSL connection (TLS)

Hi,
We are forcing a problem with SLL/TLS connection on a machine Windows Server 2003 SP2.
We spent hours trying to solve it without any result.
SYMPTOMS
No SSL connection can be established in any application since last year, e.g.:
we cannot do any windows update, because there is a time verification over SSL on the windows update website (there is an error that the time is incorrect while it is up-to-date)
we cannot open any website in Internet Explorer over https
when we try to connect to the SQL Server (database SQL 2008 hosted on the same server) with Management Studio it fails with an error: "A connection
was successfully established with the server, but then an error occurred during the pre-login handshake.(provider: SSL Provider, error: 0 - Could not
contact LSA)(Microsoft SQL Server)"
in a custom applications which sends requests over https we receive an error: "Could not establish trust relationship for SSL/TLS secure channel"
Everything seems to point at some SSL problem somewhere deep inside Windows.
We installed several patches, but without any result.
Can anybody help?
Regards,
Dawid

Hi, thanks for answers,
- In IE both SSL2.0 and TLS1.0 are checked. We tried to disable TLS1.0 - with no results.
- In HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\Schannel both SSL2.0
and TLS1.0 are enabled. We also tried to dislable TLS1.0 on the Client side - with no resuts.
- In
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\SecurityProviders\SCHANNEL EventLogging is set to 3, so it should log warnings
and errors. But we cannot find any related logs in EventLog
Unfortunately we are still in the same place.

Measurement data and problem with path selection

Hello,
I have a problem with the measurement data function; My instrument is the "Hyoki 3532-50 LCR meter".
I´m tring to save the data in a text file using the "write to measurement file VI" . From the instrument i receive an array containing the data of the measure and then i use a for loop to obtain the single data obtainig the dynamic data necessary like input in the VI function.
The problem is that i receive ( for example) the Rp data and the Cp data in two separate moment and the result using the VI is something like
1 56
2 68
3 95
1 0,12
2 0,30
3 0,56
(this is a stupid example to explain my situation)
What i would like to obtain is
1 56 0,12
2 68 0,30
3 95 0,56
The fact that i can+t receive all the three dynamic data in the same moment present also the problem that i don´t have the possibility to save in a different file every time i start the measure but to do it i have to reset the labview program ( this is due to the fact that in the property i select "ask only once" because otherwise if i select " ask at each iteration" the second data flow overwrite the file) .
If you need some image from code i can provide them

You really need to attach some code. We are graphical programmers and don't undestand longwinded text explanation
Also the code images you attached earlier are useless. The abundance of local variables, stacked sequences, express VIs, and dead code make them impossible to debug by looking at a picture.
LabVIEW Champion . Do more with less code and in less time .

Sync and problem with .mac configuration

Hi
I am having the following problem with Sync Now to my .mac account
Following the initialisation of Sync, the following message appears.
"There was a problem with the sync operation
Could not retrieve .Mac configuration."
And another message says
".Mac login failed."
The syncing to I mac has not functioned since Oct 2nd
Can someone advise how to rectify this problem
G5 Mac OS X (10.4.8)

Can you log into .mac mail? That will tell you if your username and password are OK.
I recently had a similar problem, so I unregistered my work and home computers (using the Advanced tab of .mac preferences) from .mac then re-registered them. At that point, you are offered the initial sync choices like the first time you connected to .mac.
Be careful that you don't overwrite your data. I highly suggest making backups of your Address Book, Safari Bookmarks, iCal, iDisk files, etc. on all computers before starting the process.
- Wayne
PowerMac G5 Mac OS X (10.4.8)

P35Neo2 FIR and problem with booting

So I have problem with booting my compie. Compie try to boot to the part of start windows, after that in case of switch into graphicis mobo going down and restarting (WinXP SP3). I think, that problem is not in PSU, cos i have 800W XILENCE (+3,3V 28A, +5V 32A, 4x+12V 20A, -12V 0,5A, 5VSB 3A), Board P35 Neo2 FIR, E7200 proc, bios 1.9 (updated). I have 5 disk and use raid function in bios. Graphic Radeon HD3650, Memory Zeppelin 4x1GB KIT 800Mhz.
I start with change of PSU from 550W to 800W but it didnt work, previus PSU had (+3,3V 30A, +5V 32A, 2x+12V 18A, -12V 0,8A, 5VSB 3A),
i try change memory, but no efect.
After update bios there was standard warning about bad cheksum, after resave Bios settings it was gone, and compie boot after that.
Any idea?
Thanks

So my problem is solved...but my feeling of this is not good...
I updated BIOS from 1.9 to 1.10, reset Bios settings, after restart i pressed F2 for load standart settings and i changed in Bios only that i am using RAID and disable disket and it works...i boot my compie into windows without any problem...
So i try change another things in Bios and my compie hangs in continous resets without booting into windows...no BSOD only restart and restart...
After reseting Bios settings and again Load to Default it works...and run windows...
There was only one new thing ... screen flick for the second with new screen about checking NVRAM ....this screen was not visible before (and maybe this is the problem), cos if i change something in BIOS about clocking and power management and other ones, this screen is by booting missing...and compie not run in Windows...
Next thing what i see, that in CPU multiplication dont work multiplication 9,5 and proc used frequency 2400 (9x) (it is E7200 on 2533)
i hope that this bios 1.10 fixed my problems...and my opinion is that P35 Neo 2 FIR is not ideal board for E7200 proc...so i m looking for another proc...and maybe another board...

Alpine CDE-103Bt Head Unit and Problem with 160 Gig Ipod Classic

Hi,
2 weeks agao I brought a new Alpine CDE-103BT Head unit for my car. I have owned one of the old 160 gig classics for the last year and a half and at the time I brough the unit I was told this should all work sweet. Indeed all of the documentation from Alpine, and the Sales person, said this would not be a problem.
Unfortunately from Day one, most times after I received a phone call, while playing my ipod, the Head Unit would givesme an "Error-03" message and stop playing my music. I would then have to unplug my ipod, reset it, and plug it back in. Extremely frustrating.
The people I brought the Head Unit from are trying to say its an Ipod problem, yet I never had any problems with it and after I contacted the Australian Ipod help line they said it all appears to be working correctly. The firmware version I was on when I first tried the ipod on the head unit was 1.1.2. The Alpine manual said it should be 1.1.1 (then again you would expect them to be able to cope with updates) so as a last ditch attempt I downgraded the firmware on my ipod to 1.1.1, but it did not make a difference.
The only other thing I have noticed is that I switch the repeat and shuffle settings off when I plug in the unit, but after I unplug it after an Error-03 the Repaet function has been swtiched to all - I am not sure if this is what is causing the problem.
I am getting pretty frustrated with everything and I was wondering if anyone else has come accross this issue and even me helpful had they found a way to fix it.
If not has anyone had any postive expereinces with Alpine head units?
Thanks

Hi,
2 weeks agao I brought a new Alpine CDE-103BT Head unit for my car. I have owned one of the old 160 gig classics for the last year and a half and at the time I brough the unit I was told this should all work sweet. Indeed all of the documentation from Alpine, and the Sales person, said this would not be a problem.
Unfortunately from Day one, most times after I received a phone call, while playing my ipod, the Head Unit would givesme an "Error-03" message and stop playing my music. I would then have to unplug my ipod, reset it, and plug it back in. Extremely frustrating.
The people I brought the Head Unit from are trying to say its an Ipod problem, yet I never had any problems with it and after I contacted the Australian Ipod help line they said it all appears to be working correctly. The firmware version I was on when I first tried the ipod on the head unit was 1.1.2. The Alpine manual said it should be 1.1.1 (then again you would expect them to be able to cope with updates) so as a last ditch attempt I downgraded the firmware on my ipod to 1.1.1, but it did not make a difference.
The only other thing I have noticed is that I switch the repeat and shuffle settings off when I plug in the unit, but after I unplug it after an Error-03 the Repaet function has been swtiched to all - I am not sure if this is what is causing the problem.
I am getting pretty frustrated with everything and I was wondering if anyone else has come accross this issue and even me helpful had they found a way to fix it.
If not has anyone had any postive expereinces with Alpine head units?
Thanks

Workflow and problems with labels

Hello!
I've been testing out some things in Edge and I've noticed a few things that I've been trying to find some documentation and information about, I would greatly appreciate any enlightenment on the following observations:
Frame labels do not work for me - both with files created from scratch in Edge and ones made of existing HTML + CSS files. I tried the in app lesson on looping the counter and the 'Play from (loop)' doesn't work, I thought it might have been because of an error in the instructions telling users to play from a frame label that exists at the same point in the timeline where there is a 'stop' trigger but even offsetting the 'loop' label would not work. The final sample file works as intended when previewed.
I tried a few tests with new files consisting of really basic stuff - one symbol with an 'on-click' > play from (go/start/in/one/etc) and another symbol simply animated on the x and y axis with an animation to the opacity with a stop trigger placed on the timeline and tested with the play from label placed both at the same time as the stop trigger and offset after the trigger - neither works it has no effect when clicked. (I know about what scripts to do on completion to get it to play from the start) Interestingly play from (milliseconds*) *0.125/1001/2000000 etc does work for me but this is not ideal as it is far more useful to be able to play from labels.
Animating existing HTML - I've got a simple html page set up consisting of a container div with a number of other divs inside which I have been animating in Edge. The Edge file is set up so the container CSS overflow is hidden. Now can someone please clarify if the following method of workflow is a mistake on my part, limitation in HTML+DOM, bugs in edge or combination/none of those things?
Workflow - bring in the html file to edge do simple animated opacity etc on the various elements start adding keyframes and labels etc - the label problems as above. Now my intent is to have each of the div's in the container be clicked on and bring in the next one - in the same place in the viewport. I've noticed that when changing various elements visibility after tweaking animation to look good and then subsiquently setting on-off keyframes for visibility it would suddenly cause all elements lower in the DOM to move position and suddenly have what looked like keyframes for y axis position/transform? Is this bad practice to use the on-off visibility for elements? It meant that what should be a really simple and quick 10 second animation took about 3 hours to make, should we be not using the on-off keyframes for showing/hiding buttons that are in divs that sit on top of each other? Should i set up z-index values for all elements in the CSS files? (I saw a reference to you can assign z-index values in the 'elements' panel but I can only see 'arrange' - is this a different term for z-index?)
I'm a long time user of flash, maya, after effects, digital fusion, combustion, and many other timeline based software tools - it is fairly intuitive to me picking up new systems but the issues with on-off visibility and keyframes below in the timeline really was a very frustrating workflow. I'm used to changing and editing the whole animation on the timeline seeing what works and doesn't - deleting layers, changing timings etc, i found this way of working really slow due to changes to elements position when ones above in the flow were turned on or off. Please do suggest what I should change in my approach to using edge as compared to other animation tools as it looked great on preview but I'm a bit frustrated in using the release. Is this a bug in my release?
Where is the help and reference files for Edge? - is this screen shot it? -
I can't find any info on basic definitions of the tools and options anywhere, and can't find much on anything to do with using edge in production with existing HTML documents, please send me some links if you have them. I've seen the edge javascript API thing but is there anything else?
Cheers.
Here is the approximate code of the page for reference - I actually got the file working in the end but using 'play from (miliseconds)' instead of play from (label) and much frustration slowly editing the timeline and elements visible/hidden status and redoing animation on elements below in the timeline to get them placed correctly.
HTML:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Master Document with base styles</title>
<link href="css/master_styles.css" rel="stylesheet" type="text/css" />

<link rel="stylesheet" media="only screen and (min-width: 320px) and (max-width: 480px)" href="css/mobile.css" />
<link rel="stylesheet" media="only screen and (min-width: 768px) and (max-width: 1024px)" href="css/tablet.css" />
<link href="css/desktop.css" rel="stylesheet" media="only screen and (min-width: 1025px) and (max-width: 3000px)" />
<style type="text/css">

</style>
</head>
<body>
<div id="container">
         
            <div id="mainContent">
                <div id="mainlogo">
                </div>
            </div>
            <div id="firstButton">
                  <div id="Abutton1">
                  <p><img src="img/a_72_off.png" width="72" height="72" /></p>
                 </div>
            </div>
            <div id="transition1">
                   <p>Wipe transition 1</p>
            </div>
            <div id="secondButton">
                    <div id="Abutton2">
                   <p><img src="img/a_72_off.png" width="72" height="72" /></p>
                   </div>
            </div>
            <div id="secondContent">
                <div id="Abutton3">
                <p><img src="img/a_72_off.png" width="72" height="72" /></p>
                </div>
            <div id="text1">
                  <h1>Heading </h1>
                  <p>Byline</p>
                </div>
             </div>
<div id="transition2">
    <p>Transition 2 - TBC</p>
</div>
      <div id="thirdContent">
      <div id="lastbutton">
        <p><img src="img/end_icon_crop.png" width="150" height="150" border="0" /></p>
      </div>
      <div id="text2">
        <h1>Heading</h1>
        <p>Byline</p>
      </div>
</div>
    <div id="transition3">
        <h4>Small print</h4>
</div>
</div>
</body>
</html>
CSS:
(master_styles.css)
@charset "utf-8";
body {
    margin: 0; /* it's good practice to zero the margin and padding of the body element to account for differing browser defaults */
    padding: 0;
    text-align: center; /* this centers the container in IE 5* browsers. The text is then set to the left aligned default in the #container selector */
    color: #19171B;
    font-family: AFBattersea;
    font-size: 100%;
#container { /* the main holder for all of the viewport content - an image frame */
    text-align: left;
    margin-top: 0;
    margin-right: auto;
    margin-bottom: 0;
    margin-left: auto;
#mainContent {
    z-index: -1;
#firstButton {
#transition1 {
    color: #FFF;
#secondButton {
#secondContent {
#transition2 {
    color: #FFF;
    height: 100%;
#thirdContent {
#transition3 {
    color: #FFF;
#mainlogo {
    background-repeat: no-repeat;
    background-position: center center;
    background-image: url(../img/960_off.png);
#Abutton1 {
#Abutton2 {
#Abutton3 {
#text1 {
#text2 {
#lastbutton {
#text3 {
(desktop.css) - I've not included the other css files referenced in the media queries as they only contain names of elements for this purpose
@charset "utf-8";
#container { /* the main holder for all of the viewport content - an image frame */
    text-align: center;
    margin-top: 0;
    margin-right: auto;
    margin-bottom: 0;
    margin-left: auto;
    height: 700px;
    width: 1024px;
.mainContent {
    height: 100%;
#firstButton {
    height: 100%;
#transition1 {
    height: 100%;
#secondButton {
    height: 100%;
#secondContent {
    height: 100%;
#transition2 {
    height: 100%;
#thirdContent {
    height: 100%;
#transition3 {
    height: 100%;
#mainlogo {
    background-image: url(../img/960_off.png);
    height: 72px;
    width: 960px;
    margin-top: 364px;
    margin-right: 36px;
    margin-left: 36px;
#Abutton1 {
    height: 72px;
    width: 72px;
    margin-top: 364px;
    margin-right: auto;
    margin-left: auto;
#Abutton2 {
    height: 72px;
    width: 72px;
    margin-top: 364px;
    margin-right: auto;
    margin-left: auto;
#Abutton3 {
    height: 72px;
    width: 72px;
    margin-top: 364px;
    margin-right: auto;
    margin-left: auto;
#text1 {
    text-align: left;
    margin-top: 16px;
    margin-left: 320px;
#text2 {
    text-align: left;
    margin-top: 16px;
    margin-right: 330px;
    margin-left: 360px;
#text3 {
    text-align: center;
    text-indent: -192px;
    width: 320px;
#lastbutton {
    margin-top: 364px;
    margin-right: auto;
    margin-left: auto;
    height: 150px;
    width: 150px;

Hi,
I wonder if it's related to the multilingual capability of BPM Object presentations.
Could you:
1. right mouse click the project in the Project Navigator tab.
2. click "Project Preferences"
3. click "Languages"
Do you see multiple languages? Is English (or whatever language you're using inside Studio) the default?
When you log into the WorkSpace, could you double check the language you are using (log in -> click "Settings" in the upper right corner) -> with the "Display" tab selected, is the language you chose as the default in Studio selected?
I suspect the reason you see some but not all of the labels is because you have defined some of those labels in the language selected in the Workspace. You can add the addtional labels for the various languages you want to support if you:
1. Open a presentation
2. Click one of the labels
3. In the properties tab on the right, click the field beside the "Display" property
4. Click the button with the "..." on the right side of this field
Hope this helps,
Dan

Spanish Dictionary and problems with spanish special characters

I need a spanish dictionary, with all spanish words. I know that your priority are france, spanish, germany and Italy. So, the component has problems with spanish special words, this problem was notified before.
Have you ready something? A new version?
Thank you for your time.

For the special character issue, you can check the reference:
http://forums.adobe.com/message/2430501

A lot of bug in ios 7 and problem with the iphone

There is a problem with ios 7 when I delete history with my iphone 4s ...and only one month after that I've buy my iphone appared a problem with the wi-fi!!!!!!

Try https://discussions.apple.com/message/23175298#23175298
Allan

Exchange 2010 : Doubt with recipient type and problem with disappearance of the original recipient in the mail relay

Hello. First of all, thank you very much for your attention.
After that, I will expose the problem:
I have a user domain called "comercial" with a corresponding mailbox "[email protected]"
. This user
has assigned multiple emails such as "[email protected]", "[email protected]", "[email protected]" , having as default email "[email protected] ".
On
the other hand,
another domain user
called
"menganito" with it's mailbox "[email protected]" account, also has a few mail accounts "[email protected]", "[email protected]", " [email protected]"
...having
as default email "[email protected]
The user "Comercial" is forwarding
all of it's mails to the user "menganito".
The problem is that "menganito" is not receiving the exact
"comercial"
sender email, but the email which appears by default ("[email protected]").
"Menganito" would like to know
from which email exactly the mails he is receiving have been sent ("[email protected]",
or "[email protected]"
or "[email protected]").
Also, he would like to knowthe email of the original sender (from the outside of the domain) whom the user "Comercial"
have received the email from.
In another type of email servers (Kerio,...)
this is not a problem, because forwarding by
defaultis always showing
the original sender and original receiver.
Maybe the problem comes from the recipient type I'm using.
Should I use another type of recipient? should I use a transport rule?
Any idea ? Thanks again in advance.

Hi Simon. First of all thanks for your answer.
This happens with all accounts. I tried with news accounts and different browsers for OWA and Outlook anywhere and happens the same. Is not a cache problem
The problem is
when "[email protected]"(default
and set as default answer
account by
exchange)
receives
a message in "[email protected]" when
forwards to "Menganito"
this message will appear from"[email protected]"
instead of "[email protected]".
This happens with all accounts.
I can understand that i can't avoid
default reply address on the same
domain, but also with different domains happens
the same?
The platform is only one clean and updated server 2012 as dc and another clean and updated server 2012 with exchange 2010 sp3 directly and after rollup 4 for exchange SP3, no previous versions and servicepacks of exchange 2010 was installed before. Before
install exchange 2010 sp3, i installed all the filterpacks (3) and .net 3.5 and all updates that i finded for 2012 server (i tried for 2 days): No more updates for sure. After, in powershell, i put this:
Add-WindowsFeature NET-Framework-Core,RSAT-ADDS,Web-Server,Web-Basic-Auth,Web-Windows-Auth,Web-Metabase,Web-Net-Ext,Web-Lgcy-Mgmt-Console,WAS-Process-Model,Web-Mgmt-Tools,Web-ISAPI-Ext,Web-Digest-Auth,Web-Dyn-Compression,NET-HTTP-Activation,Web-Asp-Net,Web-Client-Auth,Web-Dir-Browsing,Web-Http-Errors,Web-Http-Logging,Web-Http-Redirect,Web-Http-Tracing,Web-ISAPI-Filter,Web-Request-Monitor,Web-Static-Content,Web-WMI,RPC-Over-HTTP-Proxy
-Restart
The machine and exchange works good (i3 with 4gb ram, and raid 1 1tb of HD) and the organization only has 15 mailboxes. No problems with even viewer and all is correct.
Thanks again.

10.5.3 update and problems with ReadyNAS server

After updating to 10.5.3, I have had some problems with photoshop files on my Netgear ReadyNAS server
• I worked on a couple of photoshop files - files that existed previous to the update. I made some changes and saved them.
• Later, when I tried to open those files, I got the following error message and I'm not able to do anything with the file:
*Could not complete your request because it is not a valid Photoshop document.*
• It appears that new files created, saved, worked on later and save out again work fine. In other words, files created after the update don't appear to experience the same issue.
• I've also seen the problem when creating new files in DVDPRO HD format with a square pixel aspect ratio and with layers.
• I tried the same routine on local drives on my hard drive and had no problems. So, it doesn't appear to be a problem with my Macbook
• I also tried the same tasks with my tower before I updated the software and didn't have any problems. After the tower was updated, I tried the exact same thing and received the error message.
So, everything is telling me that the issue stems from the Mac update. So far, I only see the problem with .psd files - other formats don't seem to be a problem yet. I tried InDesign docs, flash files and they look to be fine. Strangely enough, jpgs changed in photoshop don't seem to be an issue either - just .psd files.
Checked with Netgear and they weren't a whole lot of help. They claimed it might take 60-90 days for an update on their end. Is anyone else experiencing this problem on their server? Any suggestions on what to do?

Having exactly the same problem and it is crippling my design studio from last night. Saved a previously created before the update Photoshop file (110mb) yesterday evening after doing the Apple update, opened it this morning, no joy.
It seems that this problem has been around before but not that I'm aware with the ReadyNAS server. Adobe say that you shouldn't use a networked server as they don't support this way of saving:
http://kb.adobe.com/selfservice/viewContent.do?externalId=kb403815&sliceId=2
Sorry that this post is brief but we are copying all the files to a separate server as we have deadlines. All I can say is nice work Apple. *****!!! The same goes to Adobe.

Switching iPhones and problems with contacts

I upgraded my iPhone so I am giving my old one to my boys. I was able to sign into iMessage and FaceTime with their apple id, but I can't remove my phone number. This doesn't seem to be a problem except when I change the contacts on one phone, it automatically changes it on the other phone. No matter which phone is changed, it changes the other one. I don't know if this is because the phone number is still associated with the old phone or not but that is the only thing I can figure out. Thanks for your help!

I figured it out! I had to delete account in he iCloud settings. I was scared to hit this button because I deleted my backup once and lost all my apps. Deleting the account is different I guess. Now my old phone is not linked to the new phone.

Reverting to no login necessary and problems with keychain

Similar Messages

Maybe you are looking for