Reverting to old software

I just connected my iPhone1 to itunes after a long time and updated it. Now my phone no longer works, saying that my SIM card is not supported. How can I revert back to the old software?

Rolling back to previous versions of iOS is not supported.
Regardless, doing so cannot fix a SIM card not supported message.
Try the basic troubleshooting of reset, restart, restore.  If none of those resolve the issue, then either the SIM card is bad/failed/not supported or the SIM card reader in the device has failed.

Similar Messages

  • Revert Back to Old Software Nokia 701

    how can i get the old software for nokia 701 back as front camera doesn't work even after downloading scam free
    Moderator's note: Appropriate subject provided. 

    Unfortunately there is no possibility to downgrade. If you do an update via PC by using Nokia Suite, you can nevertheless re-install the latest version again in case you had problems. In your case, I would suggest checking other applications on the Nokia Store. 

  • How do get my old software back

    How do get my old software back

    Restore from your backup?
    What happened that your old software is not on your iPhone?
    Did you restore the iPhone? Did you update the iOS version?
    Need a little more detail as to what you were doing when the
    software disappeared.
    Or are you asking how to return to a previous version of iOS?
    If that is the real question, the answer is that you cannot.
    There is no supported way to revert to an earlier version of iOS.

  • Hi, can I go back from software version OS X 10.8.1 (12B19) to my old software?

    Hi, can I go back from software version OS X 10.8.1 (12B19) to my old software?

    Which version old software?
    Which exact model computer?
    Did you make a complete clone backup of your old system before upgrading and are you prepared to have things revert to that?
    Usually downgrading operating system requires a complete erase of the computer.  You then clone a previous backup, or completely re-install the operating system and all software plus data files you put somewhere for safekeeping while doing all the other things.  Also some of your data files may have been irrevocably updated to newer versions that will not open on the old system.  Basically, downgrading is not simple unless you prepared for the eventuality in advance.

  • How to revert to old firmware version

    how can i revert to old firmware version for 2700 classic. i.e from v7.80 back to v 7.15.thanks

    MY MOBILE NOKIA 2700 CLASSIC... BEST MOBILE
    my problem is very severe mate...
    1st problem) i got low phone memory peoblem...
    then i given to customer care ...he  doesn't solved & arises some more problems.
    he told me
    i just updated ur software version 7 to 9.95(2-04-10)
    but i got....
    2 problem)restarting my mobile when some body callme or lift the call
    3rd problem) when iam connected to net through mobile only it completely downloads application finally it  displays "invalid application".
    before update same application snaptu.jar file fully worked for me
    at present invalid application.
    wats the problem any body solves this ......????
    i got problem in   NOKIA PRIORTY .i ...who will be rectify this problem ????
    i din't understanding.....!!!!!
    ANY BODY PLZ HELP ME....!

  • How do I revert to old version of itunes

    I have downloaded new version of I tunes but it doesn't work properly with downloaded cd audiobooks.  I cannot join tracks and mark as audio books.  I want to revert to old version of itunes.  I have an old ipod and I think the new version does not work properly with it.

    The way iTunes 11 treats audiobooks hasn't changed, but you may have to hunt a little for some of the menu options... You may also find Audiobooks on iPods useful.
    You can restore much of the look & feel of the previous version with these shortcuts:
    ALT to temporarily display the menu bar
    CTRL+B to show or hide the menu bar
    CTRL+S to show or hide the sidebar
    CTRL+/ to show or hide the status bar (won't hide for me on Win XP)
    Click the magnifying glass top right and untick Search Entire Library to restore the old search behaviour
    Use View > Hide <Media Kind> in the cloud or Edit > Preferences > Store anduntick Show iTunes in the cloud purchases to hide the cloud items. The second method eliminates the cloud status column (and may let iTunes start up more quickly)
    If you don't like having different coloured background & text in the Album view use Edit > Preferences > General and untick Use custom colours for open albums, movies, etc.
    If you still feel the need to roll back to iTunes 10.7 first download a copy of the 32 bit installer or 64 bit installer as appropriate, uninstall iTunes and supporting software, i.e. Apple Application Support & Apple Mobile Device Support. Reboot. Restore the pre-upgrade version of your library database as per the diagram below, then install iTunes 10.7.
    See iTunes Folder Watch for a tool to scan the media folder and catch up with any changes made since the backup file was created.
    tt2

  • How do i install the old software on my mac

    how do i install the old software on my mac, i hate Yosemite

    Please explain me as in what kind of old software do you intend to install on your macbook pro.
    -    Please tell what OS X do you wish to run on your macbook, as you said you hate Yosemite.......??
    -    Do you wish to do a clean install of your favoured OS X and later reinstall your old software...??
    -    Also, do you want to restore the entire system files means the OS X along with the old software or just want to re install your old software on the existing OS X ...??
    Be precise.....

  • Using old software on macbook

    Can I use my old final cut software without upgrading to the universal bi on my mackbook including photshop etc.
    Again I just want install my old software.... is this possible.
    thank you for your help.
    1.5ghz Powerbook G4, 1ghz Yikes, 3.4ghz Vaio, Shuffle   Mac OS X (10.3.9)  

    Yes it's possible.
    It will run a much slower speed, but yes it is possible.
    I tested my FCP non UB on my MacBook before I crossgraded and the performance was much slower than the updated UB version.
    It will run smoothly enough to edit.
    Remember to mark as helpful or solved.

  • Mac book pro -intel duo  - will my old software work with it?

    Not sure if I should get the 2.4 GHZ Intel Core 2 Duo Mac book pro as I have heard old software will not work on it and I really do not want to have to buy new software, just to add on to the cost.
    Can anyone help.
    The software I have that I want to work with it is:
    Micro Soft Office Version 10.0.0
    Photoshop Version 7.0
    Final cut Pro HD Version 4.5
    I am have OS X TIGER 10.4.6 although the operating system that will come with the new Mac book Pro will be leopard - I guess.
    Can any one help with my dilemma?
    THANKS

    Microsoft Office v.X will work fine, Adobe Photoshop 7 should be able to do its thing as well although you might have problems installing it (some of the Adobe installers don't work right). However, it's not recommended that you use less than FCP 5.1.
    Sure having to upgrade software is a pain and can substantially add to the cost of transitioning to Intel system but as time most applications will need to be upgraded anyway. It just pushes the costs forward a bit. Just remember you pay upgrade costs and not new package costs.

  • HT5278 how to get my old software on my ipod touch 4th generation

    how to get my old software on my ipod touch

    Redownload them by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • Clearing out old software

    I am trying to clear out all remnants of old software, before upgrading to Snow Leopard. (I don't want to do a clean install, just put everything in order before doing a normal one.) For example, I discovered that my trial of Retrospect 8 had left the engine running, so to speak. I just now managed to remove that (after a bit of research).
    I also see that MacFUSE has left a preferences pane. I don't know what this software is, but suspect it was installed by some other software. Anyway, it has a button to Remove the software, but when I press it, it says the software doesn't seem to be installed. How do I get rid of this preferences pane, and make sure all trace of MacFUSE are gone?
    And how do I make sure there aren't other half-uninstalled things lying around?...
    TIA
    Nic

    Here's Uninstalling Apps.
    DALE

  • I can't get the CS4 Design Standard to download onto my computer... I just purchased a new MAC and I can't install my old software.

    I can't get the CS4 Design Standard to download onto my computer... I just purchased a new MAC and I can't install my old software.

    I'm having the same issue. All my applications transferred over. Lightroom is working, but when I went to edit a picture in Photoshop, I got an error message. It told me to restart, but the program still won't open after restart. It says licensing has stopped working, but what does that mean? I can't tell whether it's unsupported/blocked, or if it's a malfunction. The error code is 150:30 See screen shot.

  • Old software on a new Mac

    I'm not sure if this is the right forum thread to post this, and I apologize if it isn't.
    I am happily awaiting delivery of my new Intel Imac! I was wondering if it is okay to put old software on a new computer. My G4 is officially dead, and I have an old version of Photoshop that I would like to continue to use until I can afford the software suite for the new computer. Is this okay to do?
    Thanks,
    Barb the Computer Illiiterate

    Photoshop (an OS X version) will run on Intel Macs, however it will run in the Rosetta emulator so expect performance to be slower than you might expect.
    Of course the older the version the less compatible it may be with the version of OS X that will come installed on your new computer. OS 9 versions can not run on Intel Macs.
    You should have a minimum of 1 GB of RAM installed (2 GB will be better) because Rosetta will demand more resources.
    Why reward points?(Quoted from Discussions Terms of Use.)
    The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
    Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

  • Old Software with Parallel Dongle or Hardware Key

    Hello,
    I'm trying to run old software that uses a HASP/hardware key/dongle on the parallel port.  Any helpful ideas on how to get the software to see it in Virtual PC, XP Mode?
    Much appreciated,
    Dave

    Hi,
    Parallel ports are not supported by XP Mode in Windows 7.
    Please refer to the following similar thread:
    https://social.technet.microsoft.com/Forums/en-US/4890a9d4-d4e7-4875-a7b0-69188b3c14e0/using-xp-software-with-a-parallel-port-dongle-in-windows-7-professional?forum=w7itprovirt
    Karen Hu
    TechNet Community Support

  • Hello there! I have a 2nd generation Ipod and right now I cannot use a lot of app because of its old software. Is there a way to solve it?

    Hello there! I have a 2nd generation Ipod and right now I cannot use a lot of app because of its old software. Is there a way to solve it?

    Only by purchasing a newer model iPod.
    To more easily find compatible apps for your 2G
    iOSSearch - search the iTunes store for compatible apps.
    Vintapps 3.1.3 - paid app.
    Apple Club - filter apps by iOS version.

Maybe you are looking for