Reverting to older firmware

Hi everyone,
I was able to download older firmware for my Airport Extreme by doing the "hold the control key while you select update firmware". But where does it save the downloaded firmware? Because when I go to the summary under airport in Airport Utility, I can only select version 7.3.2 (which I currently am using) and other, but I cant find the downloaded firmware by browsing my computer. Any idea how i can get the older firmware to pop-up?
Thanks a lot!

Hi Will-
You can attach a lot more the 8 now that Sonnet has new technology that can connect 5 drives per port. 8 x 5 drives!
You can't do it with this card, but with the other Tempo SATA cards they have you can.
I did fix my problem. I changed the firmware to version 2.03 and it works like a charm. SATA 2 is very fast.
-Ted

Similar Messages

  • REVERT TO OLDER FIRMWARE

    I have a WVC54GCA wireless camera and recently did a firmware upgrade from  v 1.00R24 to   1.1. 0 1. build 01.  Since the upgrade, I'm having major trouble with the utility and I want to revert to the older firmware...I have spent several hours on the telephone with Linksys tech support, and they aren't able to remedy the problem...the best they came up with was to have me  install a utility that is meant for the WVC80N Camera.  I complied but am not satisfied with the result.  I want to revert back to the 'original' firmware that came with the camera when purchased about a year ago.  I'm not certain that reverting will 'fix' the problems, but I don't think it will hurt.  Is there a way to reverse the firmware upgrade and start from scratch? 

    Hi,
    I looked for about 7 hours online, and finally found the correct firmware v1.1.00 build 02 on a German website. 
    Even with the translation turned on, I could not read half the site, but this is the correct firmware download.
    I put this firmware on my wvc54gca, and voila, it is now working perfectly again! Do NOT  use the newer
    v1.1.01 build 01, or you will NOT have any motion detection recording ability at all. 
    Here is the link for the German website I found the download at. The actual firmware file name is: DYFF08-407-11002.bin
    on their page it is listed as wvc54gca firmware download. I hope this helps solve this problem for you like it did for me!
    http://translate.google.com/translate?hl=en&sl=de&u=http://www.treiberupdate.de/treiber-download/download-182342-treiber-LinkSys-WVC54GCAWireless-G.html&ei=LVZ...

  • E4200 revert to older firmware

    Today I updated my e4200 v1 from 1.0.03 to 1.0.06. It has caused nothing but trouble with my internet connection, even after resetting to factory defaults.
    I just want to revert to an earlier version to test if this helps, but I can't find any downloads. So now I'm stuck with a useless router. Does anyone know where to download older versions?

    Those older versions are not safe to use and have major open security holes.

  • How do you downgrade to an older firmware?

    I want to try to downgrade to an older firmware to make my Ipod Nano 3rd generation work. It shuts of all the time and I have to restart it when it is in the Bose soundock portable. Bose techs said it is a problem with the software on the Ipod Nano, Touch, and Iphone they said Apple is aware and is working on a fix time frame two to three months. I have a $400 paperweight the way it is and would like to try something to fix without waiting. I am new to the Mac and do not know how to downgrade. After waiting for a hour for the Mac techs to answer I gave up.. (my last mac, with all the trouble with it freezing)

    wifi http://support.apple.com/kb/TS1559
    Downgrading IOS is not supported by apple.

  • Zapped Pram now system reverted to older setup

    I zapped the Pram on my G5 2.3 Ghz power mac 10.4.9 (because ethernet port was not working and was recommended by friend) and now all my applications are not working or have reverted to older version.
    Logic Pro wont launch and says Pro Application Support is needed for this version of Logic Pro, Quicktime Pro keeps crashing.ProTools has reverted back to an earlier version and ITunes is not showing any of my songs...
    The desktop screen is also older desktop screen! I cant see any Software updates for the last year when I check on Installed updates in Sys Pref.
    Any suggestions , I repaired permissions but no change.
    Message was edited by: jon mooney

    Great news!
    Wow , where do I send the million good karma points to...
    Already got them... my world & your world is a bit better place to live today... what more could you ask for?
    BTW, I'd recommend a Safe Boot , (holding Shift key down at bootup), off the HD & use Disk Utility from there to Repair Permissions, reboot once more.
    Then get Applejack...
    http://www.versiontracker.com/dyn/moreinfo/macosx/19596
    After installing, Reboot holding down CMD+s, then when the prompt shows, type in...
    applejack AUTO
    Then let it do all 5 of it's things.
    The 5 things it does are...
    Correct any Disk problems.
    Repair Permissions.
    Clear out Cache Files.
    Repair/check several plist files.
    Dump the VM files for a fresh start.
    Besides, once you really, really need it... you can't install it!

  • How to revert to old firmware version

    how can i revert to old firmware version for 2700 classic. i.e from v7.80 back to v 7.15.thanks

    MY MOBILE NOKIA 2700 CLASSIC... BEST MOBILE
    my problem is very severe mate...
    1st problem) i got low phone memory peoblem...
    then i given to customer care ...he  doesn't solved & arises some more problems.
    he told me
    i just updated ur software version 7 to 9.95(2-04-10)
    but i got....
    2 problem)restarting my mobile when some body callme or lift the call
    3rd problem) when iam connected to net through mobile only it completely downloads application finally it  displays "invalid application".
    before update same application snaptu.jar file fully worked for me
    at present invalid application.
    wats the problem any body solves this ......????
    i got problem in   NOKIA PRIORTY .i ...who will be rectify this problem ????
    i din't understanding.....!!!!!
    ANY BODY PLZ HELP ME....!

  • Firmware downgrade, where do I download older firmware?

    I just stupidly upgraded my WRT54G firmware to latest v1.02.5 only to find out that this newer version doesn't allow the internal DHCP server to assign addresses lower than the router's own address, which might seem trivial but for me it's crucial.
    Can someone advise where do I get to download older firmware versions?
    Thanks in advance!
    Matu

    You can try going here and see if this helps you.
    ftp.linksys.com/pub/network
    Good Luck,
    Ttech

  • Where can I find older firmware?

    I can't get this wrt54g working anyway i've tried.
    I want to go back firmware versions... where can I find the older firmware?

    you can go to ftp.linksys.com/pub/network and you might find the required firmware.

  • N97mini - back to older firmware

    Hello, does anybody know how to go back to an older firmware version?

    I know it has happened but it's not common and can be dangerous. Anyway, it doesn't hurt to call a Nokia care point to hear if they can roll back the firmware. But it's been a long time since I've heard of somebody doing it and most likely they won't do it.
    So if the care point can't help you I'm afraid there's nothing you can do other than wait for a less ram eating spb shell version.

  • RV042 compatibility between older firmware and new

    Hello all
    We have several RV042 routers with older firmware version 1.3.12.19-tm.
    We have purchased new RV042 routers as hot spare replacement that's coming with firmware version 4.1 installed.
    We have a VPN tunnels between multiple sites using the older firmware version.
    My question is: Will a RV042 with firmware version 4.1 connect to a RV042 with firmware version 1.3.12.19-tm and vice versa?

    Jack,
    i have seen some case come through customer having problems with connections between RV042 V2 to V3. So i wanted to test this in our lab. I tried to make them disconnect and couldn't please note this was an ideal connections no ISP involved. I did put them on the T1 connection but both public ip address are really as if locally connect as they will hit the gateway and route back through several switch i still didn't have any trouble. I have seen some V3 have trouble with older modem and cause duplex mismatch, so if the connection between modem and router is solid. Your tunnels should be solid. If you have trouble give Cisco Small Business a call @ 1-866-606-1866 and open a support case on the v3 router.
    Jasbryan

  • Older Firmware for Creative MP3 Play

    can one of the admins and moderators post where to obtain the older firmwares for their mp3 player lines. I'm one upset customer and the support is non existant to appauling.

    When firmwares are updated, all the older versions don't usually stay up on the website. Is there a particular reason you need an older version? What is wrong with the player, and did you contact Customer Support (your post wasn't clear if you were referring to Customer Support or "support" in general).
    Cat

  • How to revert to older patch version on fresh system

    I have got fresh install Solaris 9 , 117171-07 how can i revert to older patch version.
    I need this for the purpose of testing, i cant find previous release DVD ? any help ?

    I don't think you can.
    You'll have to jumpstart it from an older distribution.
    If you have a support contract, sun should be able to give you the older iso's.

  • Older Firmware revisi

    Where can i find older firmware revisions. Version 2.2.02 is not reading my track lengths correctly and i am having problems getting tech support to email me back. Firmware version . works good but i like the MTP functions and dont want to reload software on my PC. If i can get Firmware 2.20.
    or something a little older but still haves MTP capability. If anyone has an older version or know where one is posted please let me know
    Thanks

    DOH forgot .....Zen Micro Firmware

  • Older firmware WRT160NL

    Hello,
    is there anyone here that kan help me.
    I'm looking for het firmware 1.00.01 B15 for my wrt160nl
    since i upgraded to the B17 i have lots of connection drops and speed problems.
    Linksys told me that they can't help me with this firmware.
    So i'm looking for someone that knows where i can download the older firmware
    Thanks

    You can try to readjust the wireless settings on the router...
    - Under Wireless tab,set the Radio Band to Standard-20MHz and change the Standard channel to 11-2.462GHz..
    - Under Advance Wireless Settings,Change the Beacon Interval to 75,Fragmentation Threshold to 2304,RTS Threshold to 2304.
    - Under Security tab,uncheck "Filter Anonymous Internet Requests"
    - Under Setup tab,reduce the MTU to 1400.

  • WRT610N v2.0 older firmware

    Hello,
       Please someone send me a link with any older firmware for my router ( WRT610N v 2.0 ) if there is any. I plan to downgrade because my Samsung Story Station 1.5 TB is not working as it should and not even the guys at Linksys were able to help me.
    Thank you very much.

    I'm sorry for now replying but to be honest, I'm fed up with my problem...I've written about it in so many places and no one could help me. I would apreciate if you will.
    The ideea is that the HDD connected to my router (Samsung STORY Station 1.5 TB) is not working very well. The problem is that after it spins down, the router spins it up again and this happens from aprox. 10 to 10 minutes. The HDD keeps on spinning up and down even if nothing is accesing it.
    Thank you for your interest.

Maybe you are looking for