Revesal of document posted with movement type 654

I have created one outbound delivery using tcode VL01NO (Create outbound del without order reference). In PGI material qty was issued using movement type 654. Now, I need to reverse this document i.e. reversal of movement type 654, but system is not allowing the same.
Pl help on this
regards,

movement 654 is already the reversal to movement 653.
A reversal movement type does not have a reversal movement type.
you may need to create a new schedule line category in VOV6 to create a new outbound del without order reference with a 653 as movement

Similar Messages

  • Trip Co Document posted with value type 11 - Statistical actual

    Dear all,
    Can you please share what caused the CO document posted from Travel Management (tcode: PR05) having value type = 11 Statistical Actual?
    So far all the CO documents posted from Travel Management have value type = 4 - Actual.
    However we have a CO document posted from Travel Management with value type = 11 - statistical actual.
    Question:
    1. What caused the CO document posted with value type = 11?
    2. How to fix/change the value type for this CO document from 11- Statistical to 4 - Actual?
    Thank you very much in advance for your kind assistance.
    Best rgds,
    DTan

    Normally it means that in your CO account assingment there is also another CO object with a higher priority where the real value was posted.  For example if you do account assingment to the Cost Center and Internal order the real object will be Internal order and statistical posting will be at the Cost Center.  Anyway it should be visible within CO document.
    The way to correct it is to reverse and repost, means changing the trip and transferring it again.

  • Transfer posting with Mov Type 311E in MIGO with reference to SC-PO

    Hi,
    I am working with MTO scenario.
    I want to carry out transfer posting of material with movement type 311E against subcontracting Purchase Order which is sale order specific.
    However, system does not allow me to do the same. whenever transfer posting, PO & movement type is selected in transaction MIGO, item details entry tabs are displayed blank.
    Below steps are being follow:
    Scenario is MTO ( special stock subcontracting)
    1. Subcontracting PO no. 4500000147 against Sale Order no 61 created.
    2. RM code - 61, available stock 100 TO & batch no.0000000127
    3. Transfer material to vendor for processing through MIGO ( since it is a special sales order stock, transferring happens from SL 0001- Main Stores to SL VLSC -Virtual storage location) using movement type 311 E
    5. Item Data details tabs are blank.---This is the issue / error.
    Note: I am restricted to post transfer posting through MIGO-Transfer Posting (will not use MB1B) due to some enhancement of MIGO and interfaces with legacy system.
    Please have a look on attachment for SAP screen issue.
    Regards
    Mohit Jaiswal

    Hi Mohit ,
    please check below link , you need to perform steps as given
    http://help.sap.com/saphelp_470/helpdata/en/4d/2b90b043ad11d189410000e829fbbd/content.htm
    also see the sales order subcontracting using the business addon
    http://help.sap.com/erp2005_ehp_04/helpdata/en/c7/2587b8dad94c52854ccd28015dceb0/frameset.htm

  • Problem on mb1b with Movement type 309

    when I use the t-code mb1b to transfer posting with Movement type 309,the system give a hint 'Account 40000000 requires an assignment to a CO object'. I checked the configuration of omwb and obyc.It seems no problem.
    So can anyone tell me how to solve the problem? Thanks!

    Hi
    Alternative to the above solution will tell u which should work,it seems from the error that you need to put the Cost Center or G/L account. But if you don't want
    the system to ask you everytime you do the goods transfer, you have to setup
    your Cost Element / CO object. Go to transaction KA02 and put the
    appropriate CO or Cost Element (when the system gave you the warning,
    normally it gives you the CO object that need account assignment) and
    assign the Default Acc.Assigment to the CO/Cost Element.
    But before you do that, I suggest you to contact your FICO people.
    Good luck
    Regards,
    Susi

  • Valuation of subsequent Transfer Postings with Movement Type - 412 Q

    Hi,
    We are procuring raw material by raising Purchase order (without account assignment) and receiving it as unrestricted stock i.e. Plant stock.
    Whenever the material is required for a particular WBS element, then we are transferring the Plant stock to Project stock with Movement type 412 Q. That special stock is being used for Production orders which are created wrt that WBS element.
    Current valuation of Transfer posting with Movement type 412 Q is as follows.
    1. When we transfer the Plant stock to Project stock for the first time then System is valuating that stock at the Moving average price of raw material say Rs.50.
    2.After transfer posting, values are being updated in the Table QBEW as well as in the Report MBBS wrt Plant, Material and WBS element i.e Rs.50.
    3. Again, when we transfer the Plant stock of same material to Project stock for the same WBS element system is valuating the Project stock at Rs.50 instead of at the Moving average price of that material which is Rs.70 at that moment.
    So what we understand is that the system is valuating the further goods movements of that material (Project stock) is at the price of Rs.50 which was stored in QBEW table (which was updated at the first goods movement).
    So all consumption of that material (Project stock) is valuating at Rs.50, which is not resembling the Moving average price.
    Is there anyway to valuate the subsequent transfer postings of Plant stock to Project stock with the moving average price valid at that moment instead at the the price which is updated in QBEW table for the first goods movement?
    We can change through MR21, but it is not practically feasible to change the price at each and every time for Plant, WBS element and material. combination.
    Thanks & Regards
    Madhusekhar Gupta G

    Please read the explanation about the design with 412 Q movement  in OSS Note 180503 - Val. logic during transfer posting with reversal movem. type

  • Different account posting for movement type 412  E ?How?

    Account determination for the stock transfer from own stock to sales order stock:
    When we transfer the stock from own stock to sales order stock, the amount which gets transferred from own stock to sales order stock is equal to quantity multiplied by the MAP of the item.
    We have a scenario where there is a material A having MAP = 10.Quantiy of own stock for A is 100 EA .Now we have got a sales order for A with a quantity of 20 EA for a particular customer .We need sales order stock for this order at a special purchase rate say 8.
    Next we have modified the movement type 412 E in such a way that when we transfer the stock from own to sales order stocks it will ask for the amount of the total quantity transferred. When I transfer 20 EA with movement type 412 E it prompts for the amount where we have provided the value 160(=20 X 8). Then save the posting. Accounting entries which happens are as follows:
    Dr Stock    A/C u2013 310000       -
    160
    Cr Stock    A/C - 310000        -
    160
    In the process it recalculates the MAP of own stock. New MAP = ((100 X 10) u2013 160)/80= 10.5
    We do not want the MAP to be effected in this process. We want a posting as below:
                      Dr Stock    A/C u2013 310000       -
    160 (for sales order)
                      Cr Stock    A/C - 310000        -
    200  ( for own stock)
                      Dr Gain/Loss account -       -
    40
    In this process the MAP of the own stock remains as 10.But this type of posting does not happen as long as you have own stock available. Is there any way to do the above posting with movement type 412 E . Reversal entry should be possible with movement type 411 E.
    Regards,
    Feroz Choudhury

    Hi,
    I am doing the reverse. Transfering Unrestricted stock to Sales Order stock. So it should appear in MBBS.
    But in my case for example, if there is a sales order with 3 items, for 2 items posting is as follows:
    Inventory account Dr. .....
    Inventory account Cr. .....
    But for 3rd item,
    Cost of Goods Sold (COGS) Dr. .....
    Inventory Cr. ....
    So in MBBS, only first 2 items appear and not the third one.
    Can u tell me what can be the reason for this.
    Regards,
    Niraj

  • Vendor Evaluation_On time delivry with Mov type 103

    Hi,
    We are in process of implementing Vendor Evaluation in our system.
    In th eprocess we came to know that for calculating score for sub
    criteria "On time delivery" system only considers the Goods Receipt
    posted with mov Type 101 and 105.
    We have a business scenario in which we first post 103 and ask user
    to do the Quality check of the material received.Once the user accept
    the material we accept the material by posting goods receipt through
    Mov Type 105.
    this acceptance time may differ case by case depending on the
    material.
    Now if we go by the standard system settings the Vendor's score will
    be affected if the users acceptance and hence the 105 posting is
    delayed.
    Kindly guide us how to overcome this issue.
    Rajesh

    Thanks...
       If possible can you please explain , how the enhancement MM06L001 will overwrite the score with an example.
    Rajesh

  • Error in  BAPI_GOODSMVT_CREATE with movement type *261'  after posting

    Hi All,
    After sucessfull posting of  BAPI_GOODSMVT_CREATE  with movement type *261' .
    After posting ,while checking In mb51 document exists for it but checking in mmbe stock not reduced from resisticted stock.
    Can you kindly tell the import parameter to be filled to over come this error.
    Thank you.
    Thanks,
    AMS

    Hi Himanshu/ Tejaswini Khante / Madhu,
    Thank you all for your kind reply.
    @Himanshu....I have tried with LWA_ITEM-STCK_TYPE = BLANK, Still it didnt work.
    @Tejaswini Khante ...I checked the MMBE tcode, all the stocks are in 'Unrestricted use' only. The quality inspection, reserved fields are all blank. The materials are not Batch managed.
    @Madhu...Yes, i discussed with the Functional, yet to find a possible solution.
    Thanks & Regards
    Rajesh

  • Find Material Document with Movement type 103 for material document 105

    Hi experts,
    In PO History, I have three line items with movement type 103 (Blocked Stock) and one with movement type 105 (From blocked stock to unrestricted stock). I would like to know the material document with movement type 105 document that has the movement type 103.
    Regards,
    Abdullah

    Hi,
      you can get the material documents (mblnr) for the movement type(bwart) in table AUFK.
    But i think you need to pass some other data along with bwart like matnr or aufnr for getting the correct mblnr.
    Regards,
    Chaitanya

  • Not able to create a material document with movement type 103

    I am not able to create a material document with movement type 103,
    The system is populating the value as 101 .
    How do I create a matdoc with movement type 103?

    What is the error you receive? Please specify with message number.
    On MIGO, you need to change the default value mvmt type value to 103 before you enter the PO number to be able to do 103.
    Once this defualt value is set, you can enter the PO and item number in the document number fields and proceed with 103.
    But you cannot change the mvmt type for already entered items from 101-103 or vice versa.
    I think the 101-103 and 103-101 mvmt type conversion message is standard error message

  • Automatic Creation of MIGO for stock transfer order with movement type 351

    I have used the BAPI - BAPI_GOODSMVT_CREATE_OIL to create the material document number. But the test ended with error "Goods movement not possible with mvmt type 351".
    Is there any ways to eliminate the above error....
    Friends need your help

    351 Goods issue for a stock transport order (without SD)
    The quantity is transferred from unrestricted-use stock in the issuing plant to stock in transit in the receiving plant.
    Movement type 351 is only used if the goods issue is posted without an SD delivery. A goods issue for a stock transport order with SD delivery is posted using movement type 641 or 643.
    The transfer posting is also possible for materials valuated separately.
    The goods issue for a stock transport order takes place using movement type 101.
    Possible special stock indicators: E, Q
    For special stock indicators E and Q and for purchase orders assigned to an account, ensure that the quantity is not posted to the stock in transit in the receiving plant.

  • MB1B with mov. type 311 - error message

    hai experts
    I have deleted AAA storage location (in spro) actually stock is available in that storage location. now again i have created AAA storage location (in spro), now i want to trf. that stock.. while doing MB1B with mov. type 311 at the time of saving i am getting error message like this: of the required qty. of material 12356789 (material code) 100.00 kgs remain (s) open.
    Pl. help me to come out of this problem
    Regards,
    sree

    Your deletion and recreation has nothing to do with this message, here am very certain.
    But to identify what the message caused, you have to give the full message along with its message number (double click message)
    It looks like you post your 311 in reference to a document (order, or reservation..). and the quantity that you move is smaller than the requested quantity.

  • BAPI_GOODSMVT_CREATE with movement type 105

    Dears,
        notice below case
        For one po and item, there are 5 GI with mov. type '103'  .
        1. 103  --   quantity: 1.
        2. 103  --   quantity: 1.
        3. 103  --   quantity: 1.
        4. 103  --   quantity: 1.
        5. 103  --   quantity: 1.
           now i want to use BAPI_GOODSMVT_CREATE to create GI with 105 mov. type. then i put one item with quantity 3 in the 'GOODSMVT_ITEM' , but it gives error ' exceeded by 2 quantity'  (Message ID: M7 - 022).
        so i want to know if i should put 3 items with quantity 1 independently in  'GOODSMVT_ITEM' , then it will create material document.
    BR.

    Hi,
    I have completed this task of my own.. Please check the below solution..
    You need to populate these fields .
    item-entry_qnt     = ls_ekbe_103-wesbs.
    item-ref_doc_yr    = ls_ekbe_103-lfgja.
    item-ref_doc       = ls_ekbe_103-belnr.
    item-ref_doc_it    = ls_ekbe_103-buzei.
    This will post 105 movement of purchase order taking against 103 material document as  reference document.
    Thanks,
    PrakashBabu

  • Material to Material transfer with movement type 321

    Dear Experts,
    Material to material transfer with movement type 309, the system create a price difference account if price control "S"
    but we transfer material to material with movement 321 (quality ), no price didderence account is generated, system showing different document
    Exp--- Material "A" with STD price 150
    Material "B" with STD price 100
    document is created
    Material A A/c. Credit 100
    Material B A/c. Dr. 150
    My question is, the price difference where is adjusting, is finance and costing books of account will effect.
    Kindly help to solve the issue
    Thanks & Regards,

    Dear Wasim,
    321 movement is to transfer the stock of a material lying in quality to unrestricted stock.
    It's not used for material to material transfer.
    Check and revert back.
    Regards
    Mangalraj.S

  • Error in Transfer posting for movement type 303

    Hi Sir,
    I am getting following error while doing Transfer posting for movement type 303 thru BAPI_GOODSMVT_CREATE
    Error in Function:
    Order    not found or not permitted for Goods Movement.
    I am passiing all mandatory parameter for it as per BAPI Documentaion in tcode BAPI
    Transfer posting
    Transfer posting without reference to a reservation
    The following fields must be populated:
    Material number
    Plant
    Storage location
    Movement type
    Movement indicator
    Quantity in unit of entry
    ISO code unit of measurement for unit of entry
    If I am doing manually by MB1B tcode, it is successfully done.......here its not asking any ORDER No...
    Please help me .........
    Regards,
    Krishan

    I'm not sure what you're system set up is...   So I'd suggest looking at everything you enter on the screen and then checking to make sure you are passing all the information in the BAPI.
    With that said our system does require posting date, and batch.  You might check that.   Also check that you've included all the required information in the header.
    Did you use the same data when you tried to process the BAPI that you used when you tried to do MB1B manually?

Maybe you are looking for