Reviecing Error 532 5.3.2 STOREDRV.Deliver

At our site we had this problem before we upgraded to Exchange 2013 CU6 after was installed problem was fixed. About one month ago we applied some Windows Updates to the Exchange Farm 1 CAS Server, 2 Mailbox Server running in a DAG, all servers
are Windows 2012. After the windows updates were applied the
Remote Server returned '532 5.3.2 STOREDRV.Deliver; Missing or bad StoreDriver MDB properties'Remote.
error has come back. Is there a known issue with a windows update that would cause this? Would upgrading to CU7 fix the issue again?

Hi,
Before upgrading to CU7, I suggest try following method.
In the multi-tenant document Microsoft says that one should not use the "hide from addresslist" attribute on the users. I guess this is because of the Routing Agent.
http://www.microsoft.com/en-us/download/details.aspx?id=36790
More information, please refer this similar thread:
https://social.technet.microsoft.com/Forums/office/en-us/69a3e303-f848-4729-b818-ea1acaeb43d2/exchange-2013-address-book-policy-routing-agent-issue-with-mailboxes-hidden-from-the-address-lists?forum=exchangesvrsecuremessaging
Thanks
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Mavis Huang
TechNet Community Support

Similar Messages

432 4.2.0 STOREDRV.Deliver; Agent transient failure during message resubmission

I am having an issue where emails to specific users internal to internal are being successfully delivered, but [a duplicate is?] also getting stuck in the "SMTP Delivery to mailbox" queue, with the sender getting a "Delivery is delayed to
these recipients or groups:" "Remote Server returned '400 4.4.7 Message delayed" This only happens with emails to specific people in the organization, they get the email immediately after being sent, and everyone else works fine. This issue
started after we migrated the users mailboxs from Exchange 2007 to Exchange 2013 CU5, we did not notice the issue until we finished moving all user mailboxes to 2013.
Delivery Report of email to affected user:
Delivered
6/30/2014 11:20 AM mail.domain.com
The message was successfully delivered.
Pending
6/30/2014 11:20 AM
The message has been queued on server 'mail.domain.com' since 6/30/2014 11:20:15 AM (UTC-06:00) Central Time (US & Canada). The last attempt to send the message was at 6/30/2014 11:21:09 AM (UTC-06:00) Central Time (US & Canada) and generated the error
'[{LRT=};{LED=432 4.2.0 STOREDRV.Deliver; Agent transient failure during message resubmission[Agent: Mailbox Rules Agent]};{FQDN=};{IP=}]'.
-Strange time stamp
Original message headers:
Received: from mail.domain.com (172.22.220.68) by
mail.domain.com (172.22.220.68) with Microsoft SMTP Server (TLS)
id 15.0.913.22; Sun, 29 Jun 2014 21:36:34 -0500
Received: from mail.domain.com ([fe80::1554:6e6f:4ca5:85be]) by
mail.domain.com ([fe80::1554:6e6f:4ca5:85be%12]) with mapi id
15.00.0913.011; Sun, 29 Jun 2014 21:36:34 -0500
Content-Type: application/ms-tnef; name="winmail.dat"
Content-Transfer-Encoding: binary
From: T S <[email protected]>
To: M M <[email protected]>
CC: D M <[email protected]>
Subject: FW: Migration Complete
Thread-Topic: Migration Complete
Thread-Index: Ac+UAzn/W6u8OF7qRG2V93cDeqU24wACDqXL
Date: Sun, 29 Jun 2014 21:36:33 -0500
Message-ID: <[email protected]>
References: <[email protected]>
In-Reply-To: <[email protected]>
Accept-Language: en-US
Content-Language: en-US
X-MS-Has-Attach: yes
X-MS-TNEF-Correlator: <[email protected]>
MIME-Version: 1.0
X-Originating-IP: [71.170.174.74]
Return-Path: [email protected]
Update 7/2/14:
Checked event viewer, and found that event ID 1051, erroring multiple times per second with message:
"Agent 'Mailbox Rules Agent' caused an unhandled exception 'StoreDriverAgentTransientException: Store Driver Agent was unable to send email.' while handling event 'OnDeliveredMessage'"
Ran Test-MailFlow on my mailbox, and the two know non-working mailboxes, For me it returned as successful, but showed as a Failure on the two other accounts.
The test emails were actually delivered to the user mailboxes even though it shows as a Failure with the Test-MailFlow command:
From Exchange Queue viewer you can see the test emails stuck in retry, with the following information:
Identity: mail\3112\1395864371267
Subject: Test-Mailflow 8f33ae76-fdd9-4528-8e73-5b9f2481a333 66c7004a-6860-44b2-983a-327aa3c9cfec
Internet Message ID: <[email protected]>
From Address: SystemMailbox{658b82cc-efc2-4407-8c92-8303213c63e2}@domain.com
Status: Retry
Size (KB): 8
Message Source Name: SMTP:Default mail
Source IP: 172.22.220.68
SCL: 0
Date Received: 7/1/2014 9:52:12 PM
Expiration Time: 7/3/2014 9:52:12 PM
Last Error: 432 4.2.0 STOREDRV.Deliver; Agent transient failure during message resubmission[Agent: Mailbox Rules Agent]
Queue ID: mail\3112
Recipients: [email protected];3;3;[{LRT=};{LED=432 4.2.0 STOREDRV.Deliver; Agent transient failure during message resubmission[Agent: Mailbox Rules Agent]};{FQDN=};{IP=}];0;CN=Mailbox Database 2111459242,CN=Databases,CN=Exchange Administrative
Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=LCS,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain,DC=com;0

Hi S Calkin,
According to the error messages, I find following information for your reference:
1. About Event ID 1051
This warning event indicates that the transport agent referenced in the event description has encountered an unhandled exception while handing the event.
More details in the following article:
http://www.microsoft.com/technet/support/ee/transform.aspx?ProdName=Exchange&ProdVer=8.0&EvtID=1051&EvtSrc=MSExchange+Extensibility
2. About "432 4.2.0 STOREDRV.Deliver; Agent transient failure during message resubmission[Agent: Mailbox Rules Agent]"
I suggest double check whether you have enough space. I find a similar case that caused by the low space, please see this:
432 4.2.0 STOREDRV.Deliver; Agent transient failure during message resubmission[Agent: Mailbox Rules Agent]
http://social.technet.microsoft.com/Forums/exchange/en-US/750d89fb-1832-4aaf-b095-c2b9defec977/432-420-storedrvdeliver-agent-transient-failure-during-message-resubmissionagent-mailbox-rules?forum=exchangesvrgeneral
Thanks
Mavis
Mavis Huang
TechNet Community Support

#550 5.2.0 STOREDRV.Deliver: The Microsoft Exchange Information Store service reported an error.

Hi,
I created a mailbox few days before, everythign was working fine and suddenly when some one tried to send email on that mailbox it bounced back with following error:
There's a problem with the recipient's mailbox. Microsoft Exchange will not try to redeliver this message for you. Please try resending this message, or provide the following diagnostic text to your system administrator.
Sent by Microsoft Exchange Server 2007
Diagnostic information for administrators:
Generating server: Mail01.abc.com
[email protected]
#550 5.2.0 STOREDRV.Deliver: The Microsoft Exchange Information Store service reported an error. The following information should help identify the cause of this error: "MapiExceptionNotFound:16.18969:9A000000, 17.27161:00000000CC000000000000000600000000000000,
255.23226:00000000, 255.27962:FE000000, 255.17082:0F010480, 0.26937:94000000, 4.21921:0F010480, 255.27962:FA000000, 255.1494:00000000, 255.26426:FE000000, 4.7588:0F010480, 4.6564:0F010480, 2.17597:00000000, 2.25805:00000000, 4.8936:0F010480, 4.14312:0F010480,
4.2199:0F010480, 2.25805:00000000, 4.8936:0F010480, 2.22957:00000000, 2.19693:00000000, 2.17917:00000000, 2.27341:00000000, 4.8936:0F010480, 4.17097:0F010480, 4.8620:0F010480, 255.1750:0F010480, 0.26849:0F010480, 255.21817:0F010480, 0.26297:0F010480, 4.16585:0F010480,
0.32441:0F010480, 4.1706:0F010480, 0.24761:0F010480, 4.20665:0F010480, 0.25785:EC030000, 4.29881:0F010480". ##
Original message headers:
Received: from Mailbox.abc.com ([fe80::892d:93d6:b1ac:b70a]) by mail01
([10.72.0.95]) with mapi; Fri, 11 Jan 2013 14:04:55 +0500
Content-Type: application/ms-tnef; name="winmail.dat"
Content-Transfer-Encoding: binary
From: Anwar Amjad <[email protected]>
To: All-HEC <[email protected]>
Date: Fri, 11 Jan 2013 14:04:53 +0500
Subject: FW: Suggestions & New Arrival in HEC Library
Thread-Topic: Suggestions & New Arrival in HEC Library
Thread-Index: Ac3vHgwR50OLs2BnQuOzo9jWg4e1gQAvJtUw
Message-ID: <[email protected]>
References: <[email protected]>
In-Reply-To: <[email protected]>
Accept-Language: en-US
Content-Language: en-US
X-MS-Has-Attach: yes
X-MS-TNEF-Correlator: <[email protected]>
MIME-Version: 1.0
X-Auto-Response-Suppress: DR, OOF, AutoReply
After this error, i treid to send email again and there is no error and email was delivered. What was the cause of this error?
Hasan

Hi,
I tried to start seeding again but it is at same status. I will try again and hopefully it will get resolved.
But, yesterday i ran in to the most complex issue i have ever seen with Exchange.
There was a unexpected power cut at our datacentre due to which both the nodes went down.
After that both the nodes came up. But the all 3 databases were dismounted.
Therefore, i ran Eseutil /mh resulting dirty shutdown.
I was able to repair 2 databases.
But the 3rd one was not mounting with below error.
Microsoft Exchange Error
Failed to mount database 'Mailbox Database'.
Mailbox Database
Failed
Error:
Exchange is unable to mount the database that you specified. Specified database: XXXXX\First Storage Group\Mailbox Database; Error code: MapiExceptionJetErrorAttachedDatabaseMismatch: Unable to mount database. (hr=0x80004005, ec=-1216).
I was able to mount database somehow. There are 7 User mailboxes (Tier 1) on this database.
All emails sent to the users in this database are bouncing back with the below error.
This storage groups holds the mailboxes of my Senior Managements. And their mailboxes are down for almost 20 Hrs. I am spinning my head since yesterday but not able to find any fix. Can you please guide me in this concern.
Best Regards
K2
Kapil Kashyap

App error 532

Hi,
I have a Blackberry 8310 and I recently upgraded my OS from 4.2 to 4.5 from the BB site and it did everything fine. Then I went and selected one of the themes I was using on the OS 4.2 and apparently there was some problem with it, maybe because it was not compatible with OS 4.5
But anyways, after I selected that theme, it gave me this App error 532 and only the option of restart. I keep doing that and nothing is happening .. it keeps coming back to the same screen
help me. What shall I do?
Solved!
Go to Solution.

Hi and welcome to the forums!
You're not the first person to run into theme problems. You do need to only use themes written for the OS you are running on your BB.
Take a look at this link: http://supportforums.blackberry.com/rim/board/message?board.id=8300&message.id=28396&query.id=73714#...
Let us know when/if you have any questions.
IrwinII
Please remember to "Accept as Solution" the post which solved your thread. If I or someone else have helped you, please tell us you "Like" what we had to say at the bottom right of the post.

Error 532

Anyone ever had an error 532 on their curve?
what does this mean and how do i fix it?

If the error message still appears after you reset your smartphone, reload your BlackBerry® Device Software. The reload process deletes your smartphone data.
Here is the info you need to follow make sure you do back up of your data first.
Reload the BlackBerry Device Software using theBlackBerry Desktop Software
Want to contract me? You can follow me on Twitter @RobGambino
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

I used the audio widget in iBA but got this error message when I tried to deliver in iTunes Producer

-- any clue what to do? ERROR ITMS-9000: "Files of type audio/x-m4a are not allowed outside of widgets: assets/media/12%20Largo%20for%20Glass%20Armonica%20in%20G%20Minor.m4p" at Bo

Seen this iBA User Tip?
ERROR ITMS-9000: "Files of type audio/x-m4a are not allowed outside of widgets:..."

Iphone 3, sync'd with Exchange, sent mail goes to draft folder

Sent Mail (Exchange Account), is going to the drafts folder

NOTE: This also applies to Exchange 2010
You may want to check that you are getting Event ID 15002 or 15003 logged to the Application event log first before making this change.
See this
ExchangeServerPro article for reference.
Also, see this
Krudler blog post for shortened version.
Please ensure if you are modifying the
"PercentageDatabaseDiskSpaceUsedHighThreshold" value in the EdgeTransport.exe.config file, you should take into consideration the percentage value notified in the Event Log.
See this
MS Technet article for more technical information.
I had the same error as Shimon1 when using the MailFlow Tool in Exchange, however I did not have event 15002 in my Application Event Log. I resolved this problem by:
Modify the TCP/IP network protocol settings using the following commands
netsh int tcp set global chimney=disabled
netsh int tcp set global rss=disabled
netsh int tcp set global autotuninglevel=disabled
netsh int ip set global taskoffload=disabled
I noticed when viewing individual messages in the queue in Exchange Management Console Queue Viewer, they had this message:
"Error: 4.3.2 432 STOREDRV.Deliver; recipient thread limit exceeded"
This was resolved with the help of this
MS blog on Exchange SP1 improvements.
I made the following addition to the EdgeTransport.exe.config file.
<add key="RecipientThreadLimit" value="2" />
<add key="MaxMailboxDeliveryPerMdbConnections" value="3" />

Long queue processing

Hello,
first I'll describe the situation:
- we have test environment which sends e-mails to non existing e-mail addresses
- we have catch_all mailbox (using catchallagent.codeplex.com )
- on that mailbox we have rule for incoming mail that redirects all mail with sender containing '@domain.com' to another mailbox and deletes the e-mail (put it in trash)
- on both mailboxes we have retention policy which clears trash after 1 day (no possbility to set it to shorter)
- volume of these test e-mail is 3000 / day (one shot is from 10 to 20 e-mails at the same time)
- we have Forefront for Exchange
- both mailboxes are on the same database and it's separate database from rest of company e-mails
- hardware wise it's 2 cores and 16GB ram, only exchange and forefront on this virtual machine
Now the problem is that queue often hangs on redirecting the e-mails (from catch_all mailbox to second one) and takes very long time to process, sometimes errors also if you try to access said mailboxes through OWA it's impossible (timeout). Which in the
end leads sometimes to hanging of the queue and requires Transport Service restart.
The error on messages is 4.3.2 432 STOREDRV.Deliver; recipient thread limit exceeded.
We applied the fix suggested, adding:
<add key="RecipientThreadLimit" value="2" />
<add key="MaxMailboxDeliveryPerMdbConnections" value="3" />
To EdgeTransport.exe.config but it didn't help. We also tried increasing the values by +1 to 3 and 4.
Restarting Transport Service is temporary solution.
Any advice is very welcome on this problem.
Best regards,
Wojciech Iwański

It looks like it hangs on one specific one as Active for some time and then tries to proceed other ones but all get fail with error 4.3.2
432 STOREDRV.Deliver; recipient thread limit exceeded.
We've noticed that the problem mainly starts when the mailbox has lot of items (like 2000-3000 daily mail in trash before deletion), we've written simple script that connects to the mailbox and cleans e-mails after 3h and so far we've not noticed a queue
hangs, but it's work around for me not really good solution.

Queue to Journal mailbox filling up

Started yesterday morning but is getting progressively worse. The queue which sends mail to the journal mailbox seems to be processing email, just not fast enough, so the queue continues to get bigger and bigger. No changes were made yesterday. Five
servers in a DAG, all Exchange 2013 (CU4). Besides the obvious, "update to CU7 or CU8", does anyone have any thoughts?
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.

The majority of the messages sitting in the queue have the following error:
432 4.3.2 STOREDRV.Deliver; recipient thread limit exceeded
I found the following two articles which reference this issue on Exchange 2010 Hub Transport servers, but they reference modifying the 'edgetransport.exe.config' file.
http://blogs.technet.com/b/exchange/archive/2011/04/11/store-driver-fault-isolation-improvements-in-exchange-2010-sp1.aspx
https://social.technet.microsoft.com/Forums/en-US/022acffe-d80d-4fd6-8c01-2bc5f020ec91/432-432-storedrvdeliver-recipient-thread-limit-exceeded-in-the-queue-of-mails-exchange-2010?forum=exchange2010
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.

E2007 SP3 journaling problem

We're using Exchange 2007 SP3.
I've got tons of messages in my outbound queue, that are in a retry state. They're all to my journaling mailbox and have the following value for Last Error:
430 4.2.0 STOREDRV.Deliver.Exception:MapiExceptionNotEnoughDisk
None of the messages are over-size and I verified the Transport service's logon account is Network Service. I also ran Test-ServiceHealth, which came backup clean.
Per
http://technet.microsoft.com/en-us/library/bb691172(v=exchg.80).aspx, I should be able to use the Mail Flow Troubleshooter tool, to learn more, but I don't see anything useful. I checked for trouble with message queues backing up and messages not being
received by some recipients. Both only returned informational messages.
What else should I be looking at? Thanks.

It doesn't say the message is too big, it says there's insufficient disk space.
Check your application log(s) for back pressure events on the HT server(s).
http://www.msexchange.org/articles-tutorials/exchange-server-2007/management-administration/understanding-back-pressure-feature-exchange-server-2007.html
http://blogs.technet.com/b/asiasupp/archive/2007/06/26/understanding-the-new-back-pressure-feature-in-exchange-2007.aspx
--- Rich Matheisen MCSE&I, Exchange MVP

"Missing or bad StoreDriver MDB properties" but PolicyRouting is false

In my 2013 CU1 setup my users sometimes gets "Remote Server returned '532 5.3.2 STOREDRV.Deliver; Missing or bad StoreDriver MDB properties'" when sending to a shared mailbox.
I have "AddressBookPolicyRoutingEnabled : False" and the mailbox is not hidden.
Any tips on where to look?

Hi
Please refer to the explanation on this thread
http://social.technet.microsoft.com/Forums/en-us/exchangesvrsecuremessaging/thread/69a3e303-f848-4729-b818-ea1acaeb43d2
In the multi-tenant document Microsoft says that one should not use the "hide from addresslist" attribute on the users. I guess this is because of the Routing Agent.
Reference:
http://www.microsoft.com/en-us/download/details.aspx?id=36790
Cheers
Zi Feng
TechNet Community Support

Single Mailbox receiving 432-4.3.2 STOREDRV; mailbox server is too busy error emailing distribution group

I have a user who is trying to email a distribution group with approximately 185 recipients, 183 internal, and 2 external.
The user is recieving message delayed/pending for some (but not all) of the recipients. Approximately 15 recipients have recieved the mail including the external recipients and did so shortly after the mail was sent, however, 168 recipients have not recieved
the email and when I search for the mail in Message Tracking on the server, the pending recipients have the following error:
Submitted
04/12/2013 11:56 BTSDCAEXCMDB02.one.local
The message was submitted to btsdcaexccas02.one.local.
Group Expanded
04/12/2013 11:56 btsdcaexccas02.one.local
The list of members of the group "All TCP Users" was expanded so that the message can be delivered to each recipient.
Pending
04/12/2013 11:56 btsdcaexccas02.one.local
The message has been queued on server 'btsdcaexccas02.one.local' since 04/12/2013 11:56:48 (UTC) Dublin, Edinburgh, Lisbon, London. The last attempt to send the message was at 05/12/2013 12:08:22 (UTC) Dublin, Edinburgh, Lisbon, London and generated the error
'432-4.3.2 STOREDRV; mailbox server is too busy 432 4.3.2 STOREDRV.Deliver.Exception:StorageTransientException.MapiExceptionNotEnoughMemory; Failed to process message due to a transient exception with message Cannot set search criteria in SearchFolder. Try
using fewer keywords at the same time, reducing the number of users in the From, To, Cc, and Bcc fields, and reducing the number of mailboxes that are searched at the same time. 16.55847:42000000, 17.43559:0000000090020000000000000000000000000000, 255.23226:2B0A0000,
255.27962:30000000, 255.17082:F0030000, 0.27745:80030400, 4.21921:F0030000, 255.27962:FA000000, 255.1494:00000000, 255.1238:31000000, 4.7155:F0030000, 4.7155:F0030000, 4.7155:F0030000, 4.7155:F0030000, 4.7155:F0030000, 4.7155:F0030000, 4.7155:F0030000, 4.7155:F0030000,
4.7155:F0030000, 4.7155:F0030000, 4.7155:F0030000, 4.7155:F0030000, 4.7155:F0030000, 4.7155:F0030000, 4.7155:F0030000, 4.7155:F0030000, 4.7155:F0030000, 4.7155:F0030000, 4.7155:F0030000, 4.7155:F0030000, 4.7155:F0030000, 4.7155:F0030000, 4.7155:F0030000, 4.7155:F0030000,
4.7155:F0030000, 4.7155:F0030000, 4.7155:F0030000, 4.6131:F0030000, 4.7728:F0030000, 0.59311:F0030000, 4.8112:F0030000, 255.1750:00000000, 0.26849:00000000, 255.21817:F0030000, 0.30353:00000000, 4.19089:F0030000, 0.18065:0E000000, 4.26257:F0030000'.
05/12/2013 12:08 btsdcaexccas02.one.local
Message delivery is taking longer than expected. There may be system delays. For more information, contact your helpdesk.
Can anyone help as to what is going on here? This only seems to be affecting a single user, and it is intermittent as some recipients received the email, whilst others have not.

Hi Leo,
From your description, I recommend you refer to the following blog to set the values of MaxMailboxDeliveryPerMdbConnections and RecipientThreadLimit.
Store Driver Fault Isolation Improvements in Exchange 2010 SP1
http://blogs.technet.com/b/exchange/archive/2011/04/11/store-driver-fault-isolation-improvements-in-exchange-2010-sp1.aspx
What's more, here is a thread for your reference.
4.3.2 432 STOREDRV.Deliver; recipient thread limit exceeded
http://social.technet.microsoft.com/Forums/exchange/en-US/3b097117-6eb7-4368-b45a-62a4cddf871b/432-432-storedrvdeliver-recipient-thread-limit-exceeded?forum=exchange2010
Hope it helps.
If there are any problems, please feel free to let me know.
Best regards,
Amy
Amy Wang
TechNet Community Support

Error 554-5.6.0 Corrupt message content... when sending emails to other users on same exchange server

Hello
I have a very strange problem at a customer from our company.
The problem happens to only one user on the Exchange 2010 organization (SP3, no additional patches installed, Server is 2008 r2).
When this specific user sends an email to one or more users on the same Exchange organization, he gets sometimes (not always) the following error back:
554-5.6.0 Corrupt message content 554 5.6.0 STOREDRV.Deliver.Exception:ConversionFailedException; Failed to process message due to a permanent exception with message Inhaltskonvertierung: Fehlerhafter TNEF-Zusammenfassungsinhalt. ConversionFailedException:
Inhaltskonvertierung: Fehlerhafter TNEF-Zusammenfassungsinhalt. [Stage: CreateReplay]
So - TNEF, corrupt message Content... I googled the error and checked all the recommended Solutions. The Outlook Client is ok, I have doublechecked it and everything is configured like it has to be.
The Problems happens as above described only for one user when he writes emails to users from one specific Domain on the same Exchange organization (example
[email protected]).
He has this specific contacts in a SharePoint contact list which is connected to his Outlook Client.
Thanks for any help or Information!
Regards

Hi,
According to your description, I understand that one user cannot send message with error “554-5.6.0 Corrupt message content 554 5.6.0”.
If I misunderstand your concern, please do not hesitate to let me know.
I want to double confirm whether it works or not when send message to external address, how about the OWA?
It seems that message has corrupt content. Is there any 3rd prevent software or Anti-Virus software in Exchange 2010?
Regarding this issue, firstly I would like to explain that content conversion occurs in two places, that are the Store Driver and the Content Conversion stage of Categorization. Since the issue exists in the delivery mail of internal user, the agent that was
used in the process of handling by Store Driver may cause this issue.
Please try to enable pipeline tracing and content conversion tracing to get more details about this error, for your reference:
Content conversion tracing:
http://technet.microsoft.com/en-us/library/bb397226.aspx
Pipeline tracing:
http://technet.microsoft.com/en-us/library/bb125018.aspx
Best Regards,
Allen Wang

I am usining thunderbird on a mac using os 10.9.5 ; the error message reads: The e-mail system had a problem processing this message.

Diagnostic information for administrators:
Generating server: cb.intra.lutron.com
[email protected]
#554 5.6.0 STOREDRV.Deliver; Corrupt message content ##
Original message headers:
Received: from p01c11m061.mxlogic.net (208.65.144.247) by
ls186.cb.intra.lutron.com (8.14.172.44) with Microsoft SMTP Server (TLS) id
8.3.377.0; Mon, 27 Oct 2014 20:08:14 -0400
Authentication-Results: p01c11m061.mxlogic.net; spf=none
Received: from unknown [216.211.128.132] (EHLO mail-in02.adhost.com) by
p01c11m061.mxlogic.net(mxl_mta-8.2.0-0) over TLS secured channel with ESMTP
id b6ede445.0.50240.00-2357.83404.p01c11m061.mxlogic.net (envelope-from
<[email protected]>); Mon, 27 Oct 2014 18:08:11 -0600 (MDT)
Received: from bradleysweekbjs.lan (unknown [187.204.142.185]) (using TLSv1
with cipher DHE-RSA-AES256-SHA (256/256 bits)) (No client certificate
requested) by mail-in02.adhost.com (Postfix) with ESMTPSA id 70542CBCD3C;
Mon, 27 Oct 2014 17:07:56 -0700 (PDT) (envelope-from
[email protected])
Message-ID: <[email protected]>
Date: Mon, 27 Oct 2014 18:07:53 -0600
From: Bradley Sweek <[email protected]>
User-Agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10.9; rv:24.0) Gecko/20100101 Thunderbird/24.2.0
MIME-Version: 1.0
To: Carolynn Velas <[email protected]>, "shou >> Matt Shoudy"
<[email protected]>
Subject: Fwd: PO from AMIGA Light
References: <[email protected]>
In-Reply-To: <[email protected]>
X-Forwarded-Message-Id: <[email protected]>
Content-Type: multipart/mixed;
boundary="------------070107060209020302070902"
X-AnalysisOut: [v=2.1 cv=WKNrXxcR c=1 sm=1 tr=0 a=Gd5qAohCj8m7N02WsvT0RA==]
X-AnalysisOut: [:117 a=SBqzqjppweDvc7P5+lsMNg==:17 a=Plco4HD0Ln4A:10 a=BLc]
X-AnalysisOut: [eEmwcHowA:10 a=lUHFz_VCAAAA:8 a=Q0L-yA22AAAA:8 a=YlVTAMxIA]
X-AnalysisOut: [AAA:8 a=r77TgQKjGQsHNAKrUKIA:9 a=9iDbn-4jx3cA:10 a=cKsnjEO]
X-AnalysisOut: [sciEA:10 a=S5qNisC7AAAA:8 a=AYCwu-JE0DQrnhmJAu0A:9 a=wPNLv]
X-AnalysisOut: [fGTeEIA:10 a=CNO9MehPIccA:10 a=wVCSd2htZYEA:10 a=vjxRE-QYq]
X-AnalysisOut: [xoA:10 a=TZ61P25qxIYA:10 a=hBMBtJGnaRBW9O-fmB4A:9 a=DxM5wn]
X-AnalysisOut: [iiDK8XbY8C:21 a=_W_S_7VecoQA:10 a=Ki1xzB_1rGJPxIdP5wgA:9 a]
X-AnalysisOut: [=AM14pv5mMGwA:10 a=Sf_gFPzhefAA:10 a=NBtK7ctuftnU0LdIC2cA:]
X-AnalysisOut: [9 a=-0qkl0XTG-IA:10 a=QRsCojdW3GvxCdKwqr4A:9 a=n3BslyFRqc0]
X-AnalysisOut: [A:10]
Received-SPF: None
X-Spam: [F=0.3333333333; B=0.500(0); spf=0.500; STSI=0.500(-16); STSM=0.400(-21); CM=0.500; CY=0.500; MH=0.750(2014102723); S=0.200(2014051901); SC=]
X-MAIL-FROM: <[email protected]>
X-SOURCE-IP: [216.211.128.132]
Return-Path: [email protected]
Reporting-MTA: dns;cb.intra.lutron.com
Received-From-MTA: dns;p01c11m061.mxlogic.net
Arrival-Date: Tue, 28 Oct 2014 00:08:14 +0000
Final-Recipient: rfc822;[email protected]
Action: failed
Status: 5.6.0
Diagnostic-Code: smtp;554 5.6.0 STOREDRV.Deliver; Corrupt message content
X-Display-Name: Carolynn Velas
ForwardedMessage.eml
Subject:
Fwd: PO from AMIGA Light
From:
Bradley Sweek <[email protected]>
Date:
10/27/14, 5:07 PM
To:
Carolynn Velas <[email protected]>, "shou >> Matt Shoudy" <[email protected]>
-------- Original Message --------
Subject: PO from AMIGA Light
Date: Mon, 27 Oct 2014 18:04:14 -0600
From: Bradley Sweek <[email protected]>
To: [email protected]
see the attached po
edited email address from public.

That is an error message from the lutron server to you. It has nothing to do with Thunderbird at all.

Exchange 2007 database won't mount due to MapiExceptionCallFailed errors

A server is running Exchange Server 2007 SP2 on Windows Server 2008 64-bit. After a couple years of running smoothly, the Windows Application event log started filling up with several instances every minute of the following error:
MSExchangeIS (2644) First Storage Group: A bad page link (error -327) has been detected in a B-Tree (ObjectId: 5, PgnoRoot: 10) of database H:\Microsoft\Exchange Server\Mailbox\First Storage Group\Mailbox Database.edb (165296 => 3185, 817790).
Messages sent to a specific mailbox on the server started getting returned as undeliverable with the message:
#550 5.2.0 STOREDRV.Deliver: The Microsoft Exchange Information Store service reported an error. The following information should help identify the cause of this error: "MapiExceptionCallFailed..."
I assumed that the event log messages and the delivery errors were related so I ran "eseutil /d" on the database but it exited with the message, "Operation terminated with error -1605 (JET_errKeyDuplicate, Illegal duplicate key) after 76.578 seconds. Running
eseutil /mh reports the database state as clean shutdown.
The Exchange database had been backed up nightly using Windows Server 2008 Backup. I restored the latest backup of the .edb file. Unfortunately, the corruption behind the bad page link error seemingly had propagated through the backups because the restored
.edb file had the same issues.
I then attempted to create a new clean database with the goal of then transferring mailbox data from the old to the new as described in the article "Simplifying the Dial Tone Database Recovery Process in Exchange 2007" (http://blogs.technet.com/b/dhardin/archive/2009/08/25/simplifying-the-dial-tone-database-recovery-process-in-exchange-2007.aspx).
I successfully created the new storage group and database with empty instances of all mailboxes but attempts to mount the old database yield this message:
Error: Exchange is unable to mount the database that you specified. Specified database: FASTMAIL\NewStorageGroup\Mailbox Database; Error code: MapiExceptionCallFailed: Unable to mount database. (hr=0x80004005, ec=-344)
I then tried to return to the initial state of having a corrupted database but one that would at least function temporarily for all but the one broken mailbox. The idea would be to instruct individual users to run the Outlook archive command to back their
messages up locally into .pst files. Unfortunately, all attempts to mount the original .edb file yield the same MapiExceptionCallFailed error. I also tried to mount the database after deleting the transaction log files.
I searched the web for information on this error. There are some pages describing similar errors such as "hr=0x80004005, ec=2417" but I could not find any for "ec=-344". Some articles recommend running IsInteg.exe but this utility only works for databases
that are already mounted and I am unable to mount the database.
The Exchange server is running again using the empty database so that the users can at least send and receive mail. I get the sinking feeling that all hope is lost and the historical mail data that was stored on the server is gone for good. Before I face
the pitchforks of the angry mob, I figured that I would at least post an inquiry on an Exchange-related forum.
Are there any other steps I should take to try to recover the old data?

have you checked the health of the database using eseutil /mh "edbfilename.edb" ?
is the state: Clean Shutdown ?
If it is in clean shutdown state, then move the old logs, chk, .jrs files and select the option "This database can be overwritten by a restore" and mount the database.
In case if your database is not in clean shutdown state then you would need to work towards getting the database to clean shutdown using any of the following strategies based on the criteria that the database is affected with !
1. soft recovery
2. Hard Recovery
3. Hard repair
M.P.K ~ ( Exchange | 2003/2007/2010/E15(2013)) ~~ Please remember to click “Vote As Helpful" if it really helps and "Mark as Answer” if it answers your question, “Unmark as Answer” if a marked post does not actually answer your question. ~~ This
Information is provided is "AS IS" and confers NO Rights!!

Reviecing Error 532 5.3.2 STOREDRV.Deliver

Similar Messages

Maybe you are looking for