Review activity -- Send email to reviewers, with mutilple review stages

I am trying to make a series of review activities.  I want the reviewers to be notified only when their activity is in focus.  I have tried several ways but have ran into issues.
Method 1:  I had a series of Review activities that ran in sequence.  I created a workflow to run "on update" when the stage changed.  The workflow was to notify the reviewers.  I assumed that it would only notify reviewers
of the current review activity but it notified all reviewers in all review activities.  I couldnt get passed this issue so I went to method 2.
Method 2:  I had a review activity that upon completion would run a workflow.  The workflow would initiate a new template that would add the next set of reviewers.  In addition the workflow would notify the reviewers that action was required. 
The problem is that the original reviewers recieved the email as well.  I only want reviewers who have an action required to get the email.
Please note that I am fairly new to system center, so if you could provide a little detail to potential solutions that would be great.
Thanks in advance for your help.

Thanks for your reply... I sure hope I am doing something wrong.
1.  I am targeting the RA... I.E. The workflow is set in the activity event workflow config; then Review activity.  I tried it a couple of ways.  One way to target the RA when it changes, and the other is to target a specific RA based on the
stage (I.E. Changed to approve).  Also this is for change requests, but the concept should be the same.
2.  I tried a rule that was: "on update; status not equal to in progress"  Which worked, but all Reviewers in all RA's got an email.  The other rule I tried was: on update, stage changed to approve.  Which also worked, but all approvers
in all RA's got the email.
3.  Each RA has am independant list of reviewers... If someone is listed more that once, it is because there input is needed at that particular time in the process.
4.  This may be the answer.... I am going to test now.  I had them all listed one by one, and hadnt investigated the sequential activity "activity"... I.E. I had listed all of my RA's whcih in the flow diagram were sequential, rather thatn using
the sequential activity "activity".
I am going to test, Ill respond in a few on my progress.
Thanks

Similar Messages

  • Send email from OWB with authenticated SMTP server (AUTH_LOGIN)

    Hi all,
    I want to send email from Oracle Warehouse Builder 11.2.0.2 using a SMTP server with basic authentication (AUTH_LOGIN).
    I've created an ACL for OWBSYS user according to note ID 1229769.1 in support.oracle.com.
    But, I need to configure again the ACL to connect to the SMTP server using user and password.
    I read the article in metalink, *How to Send an Email Using SMTP over an SSL Connection [ID 1323140.1]*+
    but I don't know how can I configure again the ACL for use in OWB.
    How OWB is able to authenticate with the SMTP server?
    Thanks!
    Maximiliano.

    Duplicate -
    How to send email from OSB with Mail server that requires SSL or STARTTLS
    Regards,
    Anuj

  • When I my send email, its delivered with an unknown sender

    Problem with my email.  I got this email msg.
    "Mike,
    You sent your email with an unknown sender, so I was unable to reply to your email."
    when I my send email, its delivered with an unknown sender!
    This just started in the last couple days.

    Yes, 1st thing I did.   Looks normal.
    I sent an Test to my wifes PC.  Her Outlook shows my name, where my email address should show theirs only these : ( )
    I'm trying a couple test.....
    I've figure it out!!
    •  I have 3 email addresses. Two of them are thru my internet provider.  When I send thru that provider, the email is sent correctly, my email address shows as it should.
    •  When I send from my 3rd email address, which is provided thru my web site servicer, which is Go Daddy, my email address doesn't show! I'll be calling    Go Daddy!
    I just yesterday found out that their was a problem with my email. I couldn't figure out why this one guy told me my email address wasn't showing.  I spoke with another person this morning in her office, who told me the same thing - but was able to show me the email I sent her.
    I came home, my email all looked correct. Thats when I went to the Communities.
    I've got it figured out now. Thanks so much for trying to help.

  • Sending email from Lr4 with Thunderbird

    Can anyone provide some help for  sending email from Lr4 with Thunderbird as the email program. When I select a photo and right-click Email Photo... I get the email photo dialog box with Mozilla Thunderbird in the From drop down. I click Send, and then I get an error message that says "There is no email program associated to perform the requested action. Please install an email program or, if one is already installed, create an association in the Default Programs control panel."
    Well, it seems as thigh Lr has Thunderbird in the From drop down, it knows an email program exists. Thunderbird is set as the default. I'm not sure what associations I am supposed to make (.eml and .wdseml are the default extensions, MAILTO is the default protocol, and Send mail is the default MAPI).
    Ay clues or hints?

    My default mail program is Thunderbird, and it works OK with Lightroom. If you are on a Windows 7 PC, go to Control Panel and check this out.
    Hope it helps.

  • I can't send emails on iPhone with my hotmail account. Is it not possible?

    I can't send emails on iPhone with my hotmail account. Is it not possible?

    I am having the same issue. It started this week. I have 2 email accounts on my phone. One is a hotmail. And the other one is a network solutions email. I can receive from both but not send. I've deleted the accounts and added them back on and nothing. I'm going crazy because one is my work email!

  • Cannot send email on LTE with IPhone 6  and IOS 8.1

    Since I got my iPhone 6+ and upgraded the operating system to IOS 8.2, I have been unable to send email unless I am on WIFI. If I am on AT&T LTE 4G, when I hit the "SEND" button, I get this pop-up box: "Unable to Send Email / A copy has been placed in your Outbox. The sender address (my email address) was rejected by the server."
    As soon as I get to a WIFI connection, the mail goes right out, no problem. I have tried everything I can figure out, up to resetting my network settings, but nothing changes. The email address I use as my recipient address is the same one I use all the time and have used for years. Never had this problem before getting the new iPhone and upgrading the OS. (But not sure exactly at what point the LTE sending stopped working.) Any clues?

    I would check with your email provider. It sounds as if the SMTP server needs a different port to use or needs to have SSL turned on. Many email providers will not allow you to send mail when not on their physical network unless there is a way to verify who you are. SSL does that, but needs additional information, like your username or password. Go into the mail account and look at the settings for your SMTP server. See if SSL is on or off, and make sure that you have entered your username and password in all locations, even where it says optional.

  • Can't send email from Outlook with parentheses in address

    I can't send email from Outlook 2007 through my WRT400N when Outlook displays the address with parentheses as in this example: Firstname Lastname ([email protected])
    I can send if the address is in this form: Firstname Lastname <[email protected]>
    I have tested with the ISP and nothing gets through the router when the problem occurs. When I bypass the router, both forms of address will send correctly. This problem is perfectly reproducible. My router is brand new, but the problem did not show up for about a week after installation. OS is Win7. Any ideas? Thanks.
    -JimW
    Solved!
    Go to Solution.

    Try to forward the port 443 to 447 on the router.Check this link.

  • Send email from SAP with more than one attachment

    Hi all,
    How can i send email with more than one attachment and different types of document(doc,pdf,etc.) from SAP to external?
    Besr regards,
    Munur

    Hi,
    I use :
    CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
    the main problem with different attachemts is to genereate the packing_list.
    the packing list is a kind of description of the data table... where ist the start  of an image, end, size...
    "Creation of the entry for the compressed attachment
            objpack-transf_bin = 'X'.                    " it could be an image
            objpack-head_num = lv_head_num_count .  " inital 1 each att  add 1
            objpack-head_start = 1.                     " fix
            objpack-body_start = gv_startnum.    " table with attachments  1. line one
            objpack-body_num = tab_lines.          " how many lines are in the table of attachment
            objpack-doc_size = tab_lines * 255.   " size of the  attachment...
           objpack-doc_type = lv_typ . " 'JPG'.
            objpack-obj_name = 'ATTACHMENT'.
            objpack-obj_descr = lv_stripped_name  " name of the JPG
       APPEND objpack.
       APPEND LINES OF lt_goscontent TO gt_maildata.  " data Table...
    bestreg
    robert

  • How to send email from OSB with Mail server that requires SSL or STARTTLS

    Hi everyone.
    My leader ask me configuration on OSB to support send email to my company mail server (using https chanel) and customer email (some of them is gmail that require STARTTLS or SSL).
    I've configured OSB as tutorial in that link: http://blogs.oracle.com/christomkins/entry/sending_an_email_from_oracle_s
    But OSB cannot send email from mail account that configured because it cannot login to mail server. I think the reason is secure authentication with SSL or TLS.
    There some problems that similar to mine in this forum but has nobody solved it yet.
    Can you tell me the solution you know? Any suggestion is appreciated.
    Regards
    Cuong Pham

    I know I'll offer you just a workaround and not a real solution, but you can try to start your own (intermediate) SMTP server to communicate with OSB (without SSL). Then you can just relay all the messages to your "real" SMTP server which requires SSL. If you start your intermediate SMTP server on the OSB host (localhost), then this layout could be acceptable even from security point of view.

  • Send eMail via Thunderbird with filled "Email information" when using multiple profiles

    Hello.
    I hope you can help me.
    We are using two Thunderbird profiles:
    "Sales" and "Purchases".
    We have thunderbird links for both of them on the desktop:
    This is how we call start the firefox profiles:
    Purchases: "C:\Program Files (x86)\Mozilla Thunderbird\thunderbird.exe" -no-remote -p Purchases
    Sales: "C:\Program Files (x86)\Mozilla Thunderbird\thunderbird.exe" -no-remote -p Sales
    (-no-remote is needed to start Thunderbird with two instances at once, -p <Profile> is to choose the profile)
    Everything works so far.
    Now we have an application which calls the "write"-dialog of thunderbird. (the dialog where you can send eMails)
    When calling the "write"-dialog, the fields of this dialog (from, to, subject, and the text body) should be filled by parameters.
    The application uses following call:
    thunderbird.exe -compose to=[email protected],subject="example subject line",body="this is the example body" -no-remote -p Sales
    That means that the send dialog of the Sales-Profile-Thunderbird should be opened with the "sales" profile.
    (email receiver is filled with "[email protected]", subject is "example subject line", and the text is "this is the example body")
    The Problem:
    This works only if thunderbird with the "Sales" profile is not already running. If Thunderbird with the "Sales" profile is already running, Thunderbird is telling that the process is already running and should be closed first.
    Before adding the second profile "Purchases", we only used "Sales" profile, and we started thunderbird without "-no-remote -p Sales".
    With only one profile and without "-no-remote -p Sales", every worked well.
    But with 2 profiles, the user always have to close thunderbird first before calling the "write"-dialog from our application.
    Is there something I can do? Maybe changing the call used by our application to show the write-dialog?
    If you need more information, or something is not clear enough, let me know.
    Best regards
    M. Jaeger

    command line arguments here https://developer.mozilla.org/en-US/docs/Mozilla/Command_Line_Options
    Perhaps the issue here is your desire for a separate profile for sales and purchases. That looks to me to be where the rot starts. Now your trying to start a third instance.
    So how about you explain what it is your trying to achieve, as you can not be the only person in the world wanting to use email in a business.
    I see a reference to a write dialog from your application. Is it your writing an application and trying to make Thunderbird work the way you have designed your application and it simply does not do that?

  • Send email using "Shared with - Advanced" not working.

    I have a problem when sending emails in a particular situation.
    if I go to a doc library, then choose a file, click "shared with", then "advanced", then "Stop inheriting", then  "grant permissions to a user", and keep the email option checked, then click "share",
    it does NOT send the email even though it assigns the permissions correctly.
    but if i don't choose "advanced" and directly invite people, then it works and sends email successfully.
    but I cant use the second method because it does not provide the "full control" option.

    Hi Ali,
    I tested the same scenario per your post in my environment, however the email can be sent when using the first method in your post.
     The method is used for granting item-level permission to the users, and it is similar to granting the permission to users in library level or site level.
    I recommend to grant permission to a user in library level or site level to see if the email can be sent.
    Please also double check if the Send an email invitation is selected.
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • Sending email in SAP with attachments

    Hi ,
    Is there any tcode which we can send email with attachements in SAP.
    Thanks,
    Rakesh

    Hi Balaji,
    I am looking to send an email to user with attachment of my report in SAP without using broadcasting facility in BW.Wecan send an email though SO01 ,but I can't send attachments through this transaction.
    I am also looking for to schedule it biweekly in a month.Please let me know if these options if you have seen before.
    Thanks,
    Rakesh

  • Sending emails from preview with alternative email clients

    Hi, I've got a problem. I've changed my standard email-client from Apple Mail to Unibox. And, of course, I changed the standard email client in the adjustments of Apple Mail too. So everything is working fine except one thing:
    When I try to send a pdf-file from Apple preview.app as a mail, nothing happens. What can I do to tell Apple Preview to use my new Mail-client Unibox for sending mails?

    Hi, Kevin.
    I understand your need to support sales leave-behinds from your DPS app, which is why I wrote that blog post in the first place.
    The mailto: hyperlinking approach works well from a web browser, but the webkit overlay that we we get from iOS (that we use in DPS) is definitely not a browser. Browsers have special access to the local file system, where we would like to store PDFs to attach to email. The webkit overlay does not have this access, so we can't use the normal scheme of:
    mailto:[email protected]?subject=my%20email%20message&body=see%20attachment&attachment="\\myhost\myfolder\myfile.p df" to pass the path to Mail.app.
    This limitation means that you need to use some other method to provide access to that PDF. In my blog article (to which you refer), I provide a method to provide a form that would compose an email that contains a link to the PDF, which would need to be hosted somewhere the reader could access in their browser. An alternative to this approach would be to construct a server-side form that lets a validated user (sales rep?) select some files and send them to their customer. The email would need to be composed and sent from the server, and a quick Google search reveals whole pile of PHP examples of how to send email from a web form.
    Frankly, for your use case of sales enablement, I believe that a server-side system is the better choice, because it would provide you with a way to manage that content outside of DPS, so you can update it without having to republish your .folios.
    Thanks,
    James

  • TS3276 When I try sending emails through Mail with my iCloud account, it says "Unable to Sign Message"

    I cannot send messgaes through Mail with my iCloud account. Whenever I try sending them, it tells me "Unable to sign message".
    Does anybody know how to fix it?

    Check if you have set the correct language and country in your Apple TV. Maybe you are trying to connect to the wrong iTunes store.

  • Can't send emails to domains with the new TLDs .care .events .credit

    I recently got some of those new TLDs for our business and while I think they're great for short urls and links etc I don't see this picking up anytime soon. Most people I know think that the internet won't work unless you add .au at the end of stuff.
    Having said this I now also discovered that my BlackBerry Z10 wont let me send emails to these domains since it thinks it's not a real domain. (which is funny since they've applied for .blackberry)
    Is there a fix on the horizon for this soon?

    Thanks for posting about this @numnut
    I'm going to send you a private message so I can learn more and start investigating. 
    Did someone help you? Click Like! Did a post solve your issue? Click Accept as Solution!
    Follow me on Twitter or Google+ and subscribe to the Inside BlackBerry Help Blog

Maybe you are looking for

  • URL View in VC7.1

    Hi all, Apparently , from VC7.1 onwards, the URL View is no longer available.  I managed to mimic this behaviour by using hte "Hyperlink" action from a button , for example, however, this always opens a NEW windows, while we prefer to embed the targe

  • Problem while trying to get meta data from entity in CRM 2011 using java

    Hi, I have been trying to get the meta data from entity. Below is the code what i have tried.                                  EntityFilters entfilter = new EntityFilters(); EntityFilters_type0 eftypes [] = new EntityFilters_type0[]{EntityFilters_typ

  • Text to speech - issue with allocate() function

    Hi, I am using NetBeans IDE 6 and trying to use FreeTTS, but the program goes to catch System.out.println("Voicey Caugth in Main"); when it reaches synth.allocate(); Your help is highly appreciated Thanks, hesfahani import java.util.Locale; import ja

  • Netflix on Charge

    Can't seem to find an Netflix app on the Market. Is it supported on the Charge?

  • Profitability Segment filed while entering a document

    Hello, I am not able to see the filed profitability segment filed in FB01, I am using Posting Key 19 (Checked the filed status - Profitability segment - Optional Entry) Filed Status of Alternative GL account (Filed Status  - Profitability segment - O