Review missed questions if passed quiz. If fail, no review

I am trying to develop a quiz (Captivate 5.5 and 6.0) that will only allow the user to review any missed questions if they passed the quiz. If failed the user cannot review the quiz. I reviewed all the advanced actions but cannot find out how to set up my quiz. All of them are MC.

I cannot test it out because I don't use those versions anymore. But this could perhaps give you an idea of a possible work flow.
The Review button is built in the Score slide with its functionality, has no separate timeline, and you cannot program it. You can hide it until the Quiz attempts are exhausted by dragging it under the Retake button, but that doesn't solve your problem. You'll have to cheat on CP. Make the original Review button 'invisible' not in the Properties by unchecking 'Visible in Output' (think that was the option there) but by deleting the label 'Review', by setting the stroke to 0 and the fill to 0% alpha. The button is still there (maybe under the Retake button) with its functionality.
Create an image that looks exactly like the Review button, and put it over the real Review button. Since an image is not interactive, the Review button will keep its functionality. But you have to hide that image (by unchecking Visible in Output') to start with. Then you'll have to create a conditional advanced action that checks the value of the quizzing system variable cpQuizInfoPassFail. That variable gets a value = 1 when passed, it is equal to 0 when failed. And if the user passed, show the image of the Review button.
To see only the missed questions during review: Limit Review to Incorrect Answers (Captivate 6) - Captivate blog

Similar Messages

Macbook X 10.6.8. Epson SX218 failed to print every fifth line, but only in MS Office documents. I updated Office. Now that line is slightly blurred as though the printer had missed out a pass.

I am helping a disabled person with a printing problem involving a Macbook, an Epson SX218, and MS Office for Macs. The Macbook had been recently updated to OS X 10.6.8, and the printer driver reinstalled, by an Apple store. She complained the printer failed to print about every fifth line. It turned out there was no problem at all with printing web pages and emails, but only with Office (Word, Excel, Powerpoint). I updated
Office. Later all lines were printed, but imperfectly with a bit missing from bottom of every fifth line, as though the printer had missed out a pass, so I am not sure the Office update is what made the difference. I am not at all sure whether this problem arises from the Mac or the printer or Office.

It looks like that the installation process of one of the applications have caused some trouble. One of them may have changed or added kext files.
For that, the Window server crashed if you try to open a non Apple application like Firefox
Start the system in safe mode by holding the shift key on power on.
If save mode is reached, perform a permissions repair with the Disk Utility.
Don't bother about upcoming warnings like "could not repair file xy" as that occur cause you use the tool on a running system and opened files can not get touched by the tool.
After repair is done reboot system to normal and try to open Firefox.
If the problem persits, please report back here.
Lupunus

How do I set up a Bonus question in a Quiz?

I have a 30-question multiple-choice quiz that is graded, and would like to add a "bonus" question at the end-- so that if the user answers correctly they get extra points, but if they don't answer or answer incorrectly there are no consequences (and the final score is still out of 30 questions).
Is that possible to do?
Using Captivate 7.
Thanks!

Do I understand this correctly: final score can be either the result of the 30MCQ slides or the sum of those slides + bonus question result? But the passing score remains the same?
You could use 'Branch aware' in the Quiz settings. The result is that all system quizzing variables will be related either to the 30 MCQ slides or to those+bonus question: total score obtained will be higher but also the total max. score, number of questions etc. Is this what you want?
Lilybiri

Cap 5 - All questions included in quiz?!

Hi All,
We have a 50 slide module with practice questions scattered throughout. At the end we have a 10 question assessment. I've noted that cap 5 includes ALL questions in the 'quiz results' screen - even the practice questions.
To resolve I had to hide the number of questions - which worked to a point UNTIL... if the user fails the assessment they have to click the retake quiz button and this directs them way back to the very first practice question in the module which is definately not what we want - I want it to go back to the first assessment question. Captivate used to have an option - for questions 'include in quiz'. Has this option been removed - I can see it for buttons but not for questions...
This is a fairly significant problem for us.
JT

For your practice questions, on the Quiz Properties tab, have you set General > points to 0, and on the Reporting accordion unticked the Report Answers box?
Does that work?

Receiving errors (RUN BL on) (PASS BL blink) (FAIL BL off)

I am receiving the errors (RUN BL on) (PASS BL blink) (FAIL BL off) om IPOD screen, It will not reset, I plugged into Itunes and Itunes/compiter will not recognize my IPOD either. Any suggestions as to why I am getting this error all of a sudden. The IPOD had been working fine without any problems before this.
Thank You

I just came upon a few queries in 2006 and 2007 who had similar problems. Then I found one GUY who found a solution which read, as follows: "Have both of you used the reset process with the HOLD button and then press MENU and Select at the same time?"
I tried the same and had to hold on to two buttons (at random, since I was not aware as to which button was the HOLD button (but I knew which was the MENU button), and suddenly my Ipod became normal. And as soon as I connected it to my laptop, things became exactly as what it should be.
Thanks a lot guys....... My Ipod is probably Ipod Classic 5 version. Anyways the point is clear...... TO RESET TO FACTORY SETTINGS ONE HAS TO PRESS THE HOLD & MENU BUTTON FOR 10 SECONDS CONTINUOUSLY, AND THE PROBLEM IS SOLVED.
BRAVO

I forgot my security question and i guess i failed all mt atempts, what can i do ? please urgently..

Hello,
i forgot my security question and i guess i failed all mt atempts, what can i do ? please urgently..

You need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(112725)

Retake quiz - only failed questions?

Hi,
I have Captivate 4, and was wondering if you can set the quiz to retake only the failed questions.
I have a 40 random question quiz, with a pool of around 60 questions, and want the learner to retake the questions they answered wrong only, not have to sit through all 40 questions again. Is this possible?
If not, will it be possible in the new Captivate 5?
Thanks for your help.

Still been searching, no luck so far. I take it since people have been looking and no replies that it probably can't be done. Hopefully someone out there knows a work around or something for this.

Is that possible to report score from a selected set of questions in a quiz?

Hi I am new to Captivate and SCORM. I've been reading the forum discussions and Lilybirl's blog, and learned a lot in the past few days. I wish someone could help me with this too:
We hope to design a course within a single captivate project which allows the following functions:
There are several pre-tests and one post-test. The scores from each pre-tests will be used for branching purpose. See, if one takes pre-test 1 and passes, then she will go to lecture 2; otherwise goes back to lecture 1; if one takes pre-test 2 and then passes, then she will go to lecture 3; otherwise go back to lecture 2; same for pre-test 3, 4, 5, .... Now I know that I can use a customized variable to realize this part. I can create a user varaible as pretest_score, and set it as 0 at the beginning of each pre-test; let it do the math everything the learner answers a question slide. Then at the end of each pre-test, jump based on the value of the pretest_score. Then for the post-test, the pretest_score will be set as 0 again, and the culculation will start from 0. It will also generate a customized report page to report scores on each pre-test and also on the post-test.
However, we wish to be able to pass only the final score on the post-test to the LMS. Since I read that most of quiz variables are read only. Is there any way I can get around this? Is there something in the SCORM package that I can change to the variable that I created so that I can pass this variable's value to the LMS?
Any suggestions would be very helpful.
Thank you very much.

Hi,
I do not describe it in the blog posts, but you could also set the scores of the pretest question slides to 0, and track those scores only with a user variable and advanced actions. That way the total score will have only the scores of the final test, where you attach score to those question slides. Only one annoying thing: the total number of questions will have all the questions included, same with the number used in the progress indicator. You'll have to avoid showing those numbers to the user, but if you can live with that, could be easier than to create custom question slides.
Lilybiri

Missed due date for quiz due to vacation

Hi,
I was on a two weeks vacation (8-22 June) and now I'm seeing that I already missed the due date
for lesson 2 quiz. What should I do?
Thanks and regards
Thomas

Five quizzes? Although the course overview mentions five quizzes, I am only seeing three (one quiz each for Lesson 2, Lesson 3 and Lesson 4).
Unfortunately, I have missed the deadline for the Lesson 2 quiz (due to travel), which means that I cannot achieve the needed 70% to pass this class (even if I ace the two remaining quizzes, I can only achieve 67%). Perhaps I should wait until the next class offering and retake the class?
Stephen

How do I remove a question from a quiz in Captivate 5?

I need to create a course that includes a 10 slide Quiz at its end, but which also includes question slides earlier on in the sequence that do not contribute to the Quiz Results.
How do I do this?

Please be aware that although you may set the score of the earlier quiz questions to zero, Captivate will still regard them as belonging to the Quiz Scope. This means that if you offer the learner the option to Review Quiz, this review will begin from the very first quiz question, even though it may be not scored.

Question on passing string values to Partition clause in a merge statement

Hello All,
I am using the below code to update specific sub-partition data using oracle merge statements.
I am getting the sub-partition name and passing this as a string to the sub-partition clause.
The Merge statement is failing stating that the specified sub-partition does not exist. But the sub-partition do exists for the table.
We are using Oracle 11gr2 database.
Below is the code which I am using to populate the data.
declare
ln_min_batchkey PLS_INTEGER;
ln_max_batchkey PLS_INTEGER;
lv_partition_name VARCHAR2 (32767);
lv_subpartition_name VARCHAR2 (32767);
begin
FOR m1 IN ( SELECT (year_val + 1) AS year_val, year_val AS orig_year_val
FROM ( SELECT DISTINCT
TO_CHAR (batch_create_dt, 'YYYY') year_val
FROM stores_comm_mob_sub_temp
ORDER BY 1)
ORDER BY year_val)
LOOP
lv_partition_name :=
scmsa_handset_mobility_data_build.fn_get_partition_name (
p_table_name => 'STORES_COMM_MOB_SUB_INFO',
p_search_string => m1.year_val);
FOR m2
IN (SELECT DISTINCT
'M' || TO_CHAR (batch_create_dt, 'MM') AS month_val
FROM stores_comm_mob_sub_temp
WHERE TO_CHAR (batch_create_dt, 'YYYY') = m1.orig_year_val)
LOOP
lv_subpartition_name :=
scmsa_handset_mobility_data_build.fn_get_subpartition_name (
p_table_name => 'STORES_COMM_MOB_SUB_INFO',
p_partition_name => lv_partition_name,
p_search_string => m2.month_val);
                    DBMS_OUTPUT.PUT_LINE('The lv_subpartition_name => '||lv_subpartition_name||' and lv_partition_name=> '||lv_partition_name);
IF lv_subpartition_name IS NULL
THEN
                         DBMS_OUTPUT.PUT_LINE('INSIDE IF => '||m2.month_val);
INSERT INTO STORES_COMM_MOB_SUB_INFO T1 (
t1.ntlogin,
t1.first_name,
t1.last_name,
t1.job_title,
t1.store_id,
t1.batch_create_dt)
SELECT t2.ntlogin,
t2.first_name,
t2.last_name,
t2.job_title,
t2.store_id,
t2.batch_create_dt
FROM stores_comm_mob_sub_temp t2
WHERE TO_CHAR (batch_create_dt, 'YYYY') = m1.orig_year_val
AND 'M' || TO_CHAR (batch_create_dt, 'MM') =
m2.month_val;
ELSIF lv_subpartition_name IS NOT NULL
THEN
                    DBMS_OUTPUT.PUT_LINE('INSIDE ELSIF => '||m2.month_val);
MERGE INTO (SELECT *
FROM stores_comm_mob_sub_info
SUBPARTITION (lv_subpartition_name)) T1
USING (SELECT *
FROM stores_comm_mob_sub_temp
WHERE TO_CHAR (batch_create_dt, 'YYYY') =
m1.orig_year_val
AND 'M' || TO_CHAR (batch_create_dt, 'MM') =
m2.month_val) T2
ON (T1.store_id = T2.store_id
AND T1.ntlogin = T2.ntlogin)
WHEN MATCHED
THEN
UPDATE SET
t1.postpaid_totalqty =
(NVL (t1.postpaid_totalqty, 0)
+ NVL (t2.postpaid_totalqty, 0)),
t1.sales_transaction_dt =
GREATEST (
NVL (t1.sales_transaction_dt,
t2.sales_transaction_dt),
NVL (t2.sales_transaction_dt,
t1.sales_transaction_dt)),
t1.batch_create_dt =
GREATEST (
NVL (t1.batch_create_dt, t2.batch_create_dt),
NVL (t2.batch_create_dt, t1.batch_create_dt))
WHEN NOT MATCHED
THEN
INSERT (t1.ntlogin,
t1.first_name,
t1.last_name,
t1.job_title,
t1.store_id,
t1.batch_create_dt)
VALUES (t2.ntlogin,
t2.first_name,
t2.last_name,
t2.job_title,
t2.store_id,
t2.batch_create_dt);
END IF;
END LOOP;
END LOOP;
COMMIT;
end;
Much appreciate your inputs here.
Thanks,
MK.

I've not used partitioning, but I do not see MERGE supporting a variable as a partition name in
MERGE INTO (SELECT *
FROM stores_comm_mob_sub_info
SUBPARTITION (lv_subpartition_name)) T1
USING ... I suspect it is looking for a partition called lv_subpartition_name.
I also don't see why you need that partition name - the ON clause should be able to identify the partition's criteria.

Question on passing value to an HTML page and dynamic links

Hi,
I just started using Oracle APEX and have the following questions:
1) I try to pass an order number from a report page to a blank HTML page that is supposed to be a shipping label. I cannot have the HTML page resolve the placeholder within HTML code to actual order number. I have tried %P2_ORDER_ID%, #P2_ORDER_ID# or &P2_ORDER_ID. Any suggestions?
2) I have a column with link in a report page and I want the link to go to different pages based on the value of that column. How should I do that?
Thanks!
Mike.

Hi All,
Im still trying to think about this the right way.
If I add a servlet to the C2 project and use HTTP post from the HTML page and have the 2 variables in the servlet, could I then either set the variables on the session bean in order to make them available to my searchResults.jsp bean methods?
Regards
Jim

Best Practices: Question about Passing DataSet to Crystal through C#

I have used the tutorial provided by Business Objects and have successfully passed a dataset from C# code to Crystal Reports.
I have a few questions about "best pratices" though.
It appears that when passing the dataset to crystal then you no longer have the ability to put SQL Expressions in the report anymore otherwise errors will occur.
So, I'm trying to come up with a way to have a custom field in the SELECT statement and have it show up on the report as a field. So, in the below example I created a custom SQL field called TIMES7 in the query.
"Select CLM_ID, CLM, PAID_111X, *(PAID111X * 7) As TIMES7*_ From WIKI.MULCRICKET WHERE CLM_ID < 5"
If I create a formula field in Crystal and set it's value to {MULCRICKET .TIMES7} then it works like a hybrid SQL Expression at run-time.
This does work but has issues because the database field doesn't really exist in the design environment which causes error when the formula is saved. But it does work at run-time.
I was wondering if their was a best practice for this?

So why are you using a formula that doesn't work? If it errors in the designer it's telling you it's not supported.
Drop the formula into a filed and hide it if you don't want it displayed, this way it gets into the record selection formula.
"Best Practices" is don't use formulae that won't verify in the Designer. "If it doesn't work in the designer it won't work in code"
If you need to add an "unknown" field at run time then use RAS to insert the field.

Question on Passing URL Parameters

Thanks in advance for any responses to this question!
I have a dynamic table (in a master page using javascript and
asp) that links to a detail page, passing a parameter (the ID of a
product) to identify the correct row to display in the detail
page's recordset. Everything works great.
I decided I wanted to have this detail page be a "popup" in
which I control the window properties with javascript.
The problem I'm having is this: when I put the javascript
code (for the popup window's properties) in the href of the dynamic
table cell that links to the detail page, it's no longer passing
the parameter properly.
Here's the code BEFORE the javascript was entered:
<td width="95" class="product_cell"><div
align="center"><a href="detail_container.asp?<%=
Server.HTMLEncode(MM_keepNone) + ((MM_keepNone!="")?"&":"") +
"ID=" + rsHDPE.Fields.Item("ID").Value
%>"><%=(rsHDPE.Fields.Item("image").Value)%></a></div></td>
As you can see, detail_container.asp is the detail page, and
?<%= Server.HTMLEncode(MM_keepNone) +
((MM_keepNone!="")?"&":"") + "ID=" +
rsHDPE.Fields.Item("ID").Value %> is the asp code that
dreamweaver included to pass the parameter.
Now, if I WAS NOT passing a parameter, here's the line
including javascript code - which I have tested with success - to
open the popup window to my specifications:
<td width="95" class="product_cell"><div
align="center"><a
href="javascript:poptastic('detail_container.asp');"><%=(rsHDPE.Fields.Item("image").Valu e)%></a></div></td>
(yeah, poptastic is a silly name for a function, isn't it?)
But how do I combine these to get the parameter to pass AND
control the window properties?
Because this doesn't work:
<td width="95" class="product_cell"><div
align="center"><a
href="javascript:poptastic('detail_container.asp');?<%=
Server.HTMLEncode(MM_keepNone) + ((MM_keepNone!="")?"&":"") +
"ID=" + rsHDPE.Fields.Item("ID").Value
%>"><%=(rsHDPE.Fields.Item("image").Value)%></a></div></td>
How can I pull this off? Is my syntax wrong?

Of course, if you look at the linked URL, you won't see any
of this code,
right?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Deaf Web Designer" <[email protected]>
wrote in message
news:eh9hi9$sv8$[email protected]..
> It is very confusing to see different partial HTML/js
code. If you please
> post
> a URL link to your example page you are working on. It
is easier that way,
> where you will get some help more effective and
productive way.
>
> Cheers, DWD
>

Captivate 5: Shuffling Questions in a Quiz

Hi all,
I know it's possible to shuffle answers in a quiz, but is it possible to shuffle questions? I would like to shuffle my questions so that users are presented with quiz questions in random order.
Thanks!
Brittany

Hi Rod,
Never thought of using the Question Pool, but that's a great suggestion. I think that may do the trick!
Much appreciated!
Brittany

Review missed questions if passed quiz. If fail, no review

Similar Messages

Maybe you are looking for