Review: N97 with Maps 3.1 fail.

http://www.nokiausers.net/General/Family-Road-Trip​-with-Ovi-Maps-3.0-The-Nokia-N97.html

as i see it, i want a device as its advertised.
not paying for an additional internet connection over my provider!
gps should work on its own.
and the review shows a perfect example for this.
the review is in some village and in the nature of finland. there is no
internet access all the way for 300 km. so your phone should work with its
internal gps only. no car-navigation needs gps for getting a sat fix.
my n95 and e71 worked without a-gps too. why doesnt the n97?
another example is my sport. im sitting in a sailplane, gliding in the bavarian alps.
6000 feet and higher, there is absolutely no internet or network available.
i want my device logging the flight and giving me exact coordinates and routes with
altitude and speed over sportstracker (which worked perfect on my other phones!).
but i cant use the n97 for this.
i cant make my winch-start depening on the time my n97 gets its first sat fix, i would
wait for hours down on the ground! and then in the air, i dont want it to loose its fix constantly.
and to be honest, i dont want to start fiddeling around with this device up in the air, i have to
concentrate on other things which could be dangerous for me (and others!)
cheers.

Similar Messages

  • No "navigate to" option on n97 with maps 3

    There's no way to set a route with my brand new n97. I'm using maps 3 but the menu items as described in the help is not there. I can not search for any address.
    How can I fix this?
    Thanks,
    Erwin

    H Tony. Glad you're sorted - the logic IS a bit twisted, not very intuitive at all.
    And it's the same with deleting Favourite Places, or Stored Routes.
    To understand the twisted logic, you should think about all the recent developments from Nokia, or should I say Ovi? They all involve the use of the Internet as if it was yourl ocal hard drive. they've adopted an "always on" Internet policy.
    So, can I assume you have an Ovi Account? Good. Make sure everything is up to date - device info, verify phone, email etc.
    You can "delete" places and favourites from your phone by synchronising your phone with Ovi Maps online. This will place any newly stored Routes / Places onto your Ovi Maps online.
    Having saved your Route, as described above, go into Favourites on your phone. At the top of your screen you'll see "Synchronise with Ovi" - press this. This will send your new route to your online Maps.
    Go online and send the new route to the trashcan.
    Go back to the phone and "Synchronise with Ovi" again.
    It should now be gone from the phone.
    I think the same procedure can be done with Favourites. Whether this can be done by synchronising with Ovi Suite, I don't know. I don't use Ovi Suite much. Try to get used to using your online account. I know what I described above is a bit convoluted, but the more you use your online account, the more it all makes sense.
    By the way. The logic for all this thread is that Nokia has decided that, when you are holding your phone, you want to navigate to somewhere FROM WHERE YOU STAND, either by driving or walking. They assume that, if you want to do route planning, from somewhere else to another place, it's not needed right at this moment. It's the very definition of Planning.
    In this context, look at your online Ovi Maps again. If you are doing route Planning from home, for a later journey, use your PC. Route planning via your online Ovi Maps is much easier, more powerful, and you can "sync" the route to your phone.
    Makes sense?
    Bonne Chance!

  • N97 Nokia Map

    Hi guys,
    Anyone know the application name list in the Installed Application:
    (Setting --> Application MGR --> Installed apps.)
    Nokia Map (7MB)
    I uninstalled this application call Nokia Map and I free 7MB from the C.
    But my MAP icon still found in the application menu and the MAP is still working fine.
    Ohhhh dear, what had I done ?
    I also don't know ........
    This morning I notice the latest update of OVI MAP (9MB).
    After I download the update from OVI and installed, the Nokia Map is appear in the Installed apps. list again with 7MB. shhhhhh
    ** the goal is to free more memory of my N97, I might uninstall all the application until the phone is NO MORE MEMORY FULL issue. 
    Best regards
    Anderson

    Despite the phone being short of RAM you DO need about 20 meg free on C for the phone to run reasonably quickley, there are 100's of threads advising on this, Opera Mini is NOT a memory hog (although Opera Mobile is) there is no need for an anti virus on a symbian phone it is simply a waste of space and resources. Do a search on the forum for optimising memory you will get lots of advice.
    /t5/Nseries-and-S60-Smartphones/memory-reorganiser-N97/m-p/624888
    /t5/Nseries-and-S60-Smartphones/Save-space-on-C-with-Maps-on-N97/m-p/655357
    If I have helped at all, a click on the White Star is always appreciated :
    you can also help others by marking 'accept as solution' 

  • Mesage mapping is not failing but interface mapping is failing

    Hi can any body help with the followin errro when i test  the interface  mapping  and surprisingly the message mapping is not failing
    Runtime exception occurred during execution of application mapping program com/sap/xi/tf/_MM_purchOrdChangeJR_to_salesOrdChangeR3_: com.sap.aii.utilxi.misc.api.BaseRuntimeException; RuntimeException in Message-Mapping transformation: Runtime exception during processing target field mapping /ORDERS05/IDOC/E1EDP01/E1EDP19/IDTNR. The message is: Exception:com.sap.aii.mappingtool.tf3.IllegalInstanceException: Too few values in first queue in function useOneAsMany. It must have the same number of contexts as second queue. in class com.sap.aii.mappingtool.flib3.NodeFunctions method useOneAsManycom.sap.aii.mappingtool.flib3.Plainer@d1221323c, ,
    can any body tell me the difference between message mapping interface mapping internally
    thanks andregards
    nelakonda

    Hi,
    > MM_purchOrdChangeJR_to_salesOrdChangeR3_: com.sap.aii.utilxi.misc.api.BaseRuntimeException; RuntimeException in Message-Mapping transformation: Runtime exception during processing target field
    1)  Select Message Mapping and  go for F7 and check is it correct  and test manually  by give values if possible  try to  paste the Pay load of the actual data  and test it  whether the Mapping  is Sucess
    2) Select the Interface Mapping  and Go for F7 and check  whether it  is correct. Check once  again  the Outbound / inbound Message Types
    3) Check Whether all the  necessary Objects  are Activated
    Regards
    Agasthuri Doss

  • Problem with mapping the Entity beans onto database tables

    Hi,
    I got a problem with mapping the Entity beans onto database tables. Here are what I did:
    First Step:
    asant capture-schema
    Second Step:
    capture-schema -driver com.pointbase.jdbc.jdbcUniversalDriver -dburl jdbc:pointbase:server://localhost/sun-appserv-samples -username pbPublic -password pbpublic -table APPLICANT -table APPLICANTSKILL -table CUSTOMER -table LOCATION -table job -table JOBSKILL -table SKILL -out build/agency.dbschema
    The first step was fine. But, in the second step, I got the error message as follow:
    using dburl:jdbc:pointbase:server://localhost/sun-appserv-samples
    using username:pbPublic
    using password:pbpublic
    using driver:com.pointbase.jdbc.jdbcUniversalDriver
    using schemaname:null
    using output file:build/agency.dbschema
    JDO71100: Failed to find a class. Verify that the class is available on your CLASSPATH
    java.lang.ClassNotFoundException: com.pointbase.jdbc.jdbcUniversalDriver
    at java.net.URLClassLoader$1.run(URLClassLoader.java:199)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.net.URLClassLoader.findClass(URLClassLoader.java:187)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:289)
    at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:274)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:235)
    at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:302)
    at java.lang.Class.forName0(Native Method)
    at java.lang.Class.forName(Class.java:141)
    at com.sun.forte4j.modules.dbmodel.jdbcimpl.ConnectionProvider.<init>(Co
    nnectionProvider.java:38)
    at com.sun.jdo.api.persistence.mapping.ejb.CaptureSchema.main(CaptureSch
    ema.java:130)
    at com.sun.jdo.spi.persistence.support.ejb.util.CaptureSchemaWrapper.mai
    n(CaptureSchemaWrapper.java:29)
    Thanks for your help!

    You need to add the pbclient.jar or some similar name like that, in the CalssPath.

  • Maps OTA update fails, X6

    Every time I've tried to update the maps OTA it fails. Other apps have updated fine. I'd really like to get the latest version, I don;t have a cable at the moment for updating from PC.
    Nokia N8 on Belle

    You need to uninstall the older version first from settings>application manager and start the update again. Just to let you know map data of other countries, voice and drive guidance you downloaded before will be deleted. Synchronise your directions, landmarks etc with Ovi before performing the update. Good luck.
    If a reply has solved your problem click Accept as solution button, doing it will help others know the solution. Thanks.

  • CRM orders in R/3 with rejected (cancelled) lines fail on billing.

    Hi,
    I have issue in the replicatuion of the orders and Invoice generation in R/3 system.
    u2022CRM orders in R/3 with rejected (cancelled) lines fail on billing.
    u2022CRM orders in R/3 have the value of the rejected lines included in the order header.
    u2022CRM orders in R/3 have the rejected/cancelled lines included in internal BW Traffic and Revenue Reports.
    u2022CRM orders that have been saved but only contain rejected/cancelled items can be confirmed and passed to R/3.
    your inputs will be appreciated!!
    Regards,
    Sathya.

    Already answered

  • Cannot access to any site with ssl connection and fail to open safari and keychain, unless restart computer and login in with Guest account.

    when Update to 10.7.2 ,I cannot access to any site with ssl connection and fail to open safari and keychain, unless restart computer and login in with Guest account.
    OS:10.7.2
    Macbook Pro 2010-mid 13inch

    I also have the same problem, however if I use Firefox or Opera sites with ssl connection work fine. Still, I can't use Google Chrome (ssl), Safari (ssl), the Mac app store (generally), or the iTunes store (generally). Both the iTunes store, Safari and the app store won't respond, and Chrome displays this error: (net::ERR_TIMED_OUT). The problem persists regardless of what network I'm using. Also, when trying to access the keychain or iCloud, the process will not start (will hang). I didn't have these problems at all before updating to 10.7.2.
    Sometimes rebooting helps, and sometimes not. If the problem disappears by rebooting, then it only lasts a few minutes before it reappears. It is very frustrating, especially since there doesn't seem to be any obvious or consistent way of which to fix it.
    I'm also using a Macbook Pro 13-inch mid 2010.

  • Problem with maps on e72

    Hi everyone
    I've got a problem with maps on my E72.
    I've seen advert that Nokia is going to let everyone use maps for free on selected models.
    I was going to buy Sat Nav for whole Europe as I travel a lot and I was going to change my old N95. I thought I could do both in one new phone. Checked all the available models and chose E72. It said it;s got GPS and you don't need to use your network and spend fortune on internet connection. Got it from eBay for £270.
    I installed Ovi Maps from internet and the first thing that surprised me was it had 'only' 7-8MB.
    I thought that something was wrong, maps for 72 countries couldn't be 8MB big.
    After some time I managed to set my e72 up. Put my Maps on and...
    It takes loads of time to find GPS connection, but the worst thing is if I type lets say Paris it doesn't find anything. Map has wholes, like suddenly the roads end and there's nothing there.
    My question is what am I doing wrong? Do I need to download something more? I didn't have any maps on my phone when I bought it. Where can I find them?
    If someone could help I'd appreciate it.
    Thanks a lot.

    I forgot to mention that when I choose a destination it keeps saying Calculating route all the time. I waited about 15 minutesand it didn't calculate anything.

  • Problem with maps in Mavericks on iMac

    I have a problem with my Maps on Mavericks.
    I can open it just fine, no crash or whatever but the map itself just won't load, whatever mode it is on. Here is the screenshot of my Maps:
    As you can see, it just stays blank all the time.
    I'm  also running Parallels 9 and don't know if that has something to do with problem.

    Spent days trying various fixes, but this is the one that did it for me. Thanks!
    livetowin
    Re: Problem with maps in Mavericks on iMac 
    Dec 8, 2013 7:14 PM (in response to robin1943)
    Try this
    Since my date and time were incorrect and imessage was not working as well, I tried this
    1. Go to system preferences and click date and time
    2. Select date and time tab
    3. Uncheck "set date and time automatically" and manually enter the correct time
    4. Go to time zone tab and uncheck the box there too
    5. Go back to date and time tab and now check the box "set date and time automatically"
    6. Then check the box in time zone as well
    Now open maps and see if it works!

  • When my iPhone 4S (with ios7) experiences a failed call while connected to my Bluetooth hands free in my car(screen locked) the failed call appears on the locked screen, as it should, then when I unlock the phone it automatically redials the failed call,

    When my iPhone 4S (with ios7) experiences a failed call while connected to my Bluetooth hands free in my car(screen locked) the failed call appears on the locked screen, as it should, the problem arises whenever I unlock the phone, it automatically redials the last failed call, it doesn't do this with missed calls that are on the locked screen, if any. It is really annoying as sometimes the phone doesn't respond to attempts to end the call before it connects to the number. I then have to explain that it was my phone and not me, I look like an idiot, which I don't really need any extra help with!! Does anyone have any ideas? I don't want to stop missed call from showing in the locked screen but it might be associated with the failed calls and therefore be the only resolution

    I have had the same issue which was driving me mad but think I have just found a way around it. In iOS 7 if you swipe up on the lock screen to access quick settings and go into timer then click the home button you get into the phone without calling the person back. Not a great 'fix' but hope it works for you. Come on Apple this isn't good enough, fix this bug otherwise you will lose your customers.

  • Ricoh Aficio MP C2051 Scan to Folder - Windows 7 64 bit Error: Authentication with the destination has failed check settings

    I got an issue with OS of widows 7.
    unable to scan  documents to user's PC.am getting error message "Authentication with the destination has failed. Check settings. To check the current status, press [Scanned Files Status
    Other Windows xp  PC can do this.
    How can I fix this problem?
    Printer Model :C2051 /mp2001sp

    Hi,
    I searched for the error and it is mentioned in Ricoh's website:
    Messages Displayed on the Control Panel When Using the Scanner Function
    http://support.ricoh.com/bb_v1oi/pub_e/oi_view/0001045/0001045718/view/trouble/int/0036.htm
    Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
    Message
    Cause
    Solution
    “Authentication with the destination has failed. Check settings. To check the current status, press [Comm. Status/Print].”
    The entered login user name or login password is not correct.
    Check that the user name and password are correct.
    Check that the ID and password for the destination folder are correct.
    A password of 128 or more characters may not be recognized.
    From the solution, it mentioned that the issue could relate to user account or its password.
    Please let me know if it is in domain environment. If so, please test to log the same user account currently on Windows 7 to Windows XP and see if issue persists.
    Also please test to directly access the scanning folder on printer server to see if there is any issue in accessing the destination folder. 

  • I have just upgraded to Windows 8 and my scyning and upgrading my phone with new apple software fails, Itunes looses connection with the device (phone), cant backup the phone or download new software, is this an issues with Windows 8?

    I have just upgraded to Windows 8 and my scyning and upgrading my phone with new apple software fails, Itunes looses connection with the device (phone), cant backup the phone or download new software, is this an issues with Windows

    Hi, stig2013. 
    I would recommend the steps in the article below.  See the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    If you are receiving an error message, find the exact error number that you recieved in the article below and process the steps. 
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if you manually disconnect the device during the restore process. You can resolve this issue by using USB troubleshooting, using a different Dock Connector or Lightning Connector to USB cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
    Cheers,
    Jason H. 

  • Ricoh Aficio MP C2051 Scan to Folder - Windows Server 2012 Error: Authentication with the destination has failed check settings

    I have recently upgraded a clients servers to Windows Server 2012 & since doing so have lost the ability to scan to folder.
    Both servers are domain controllers and previously on a 2008 domain controller I would have had to make the following change to allow scan to folder:
     Administrative Tools
     Server Manager
     Features
     Group Policy Manager
     Forest: ...
     Default Domain Policy
    Computer configuration
     Policies
     Windows Settings
     Security Settings
     Local Policies
     Security Options
     Microsoft Network Server: Digitally Sign Communications (Always)
     - Define This Policy
     - Disabled
    However I have applied this to the Windows 2012 server but am still unable to scan, possibly due to added layers of security in server 2012. The error on the scanner is Authentication with the destination has failed check settings.
    I have also tried the following at the server:
    Policies -> Security Policies
    Change Network Security: LAN Manager authentication level to: Send LM & NTLM - Use NTLMv2 session security if negotiated.
    Network security: Minimum session security for NTLM SSP based (including secure RPC) clients and uncheck the require 128 bit.
    Network security: Minimum session security for NTLM SSP based (including secure RPC) servers and uncheck the require 128 bit
    I have created a user account on the server for the ricoh and set this in the settiings of the Ricoh and verified everything is correct.
    Are there any other things I have missed?

    I can email anybody the firmware module if interested and how to...
    Tell me your model and email
    If your offer still stands we have an Aficio MP C3300
    Firmwareversion
    Modulnavn Version Delnummer 
    System/Copy  1.13  D0255562H  
    Network Support  8.16.1  D0255563D  
    Font EXP  1.03  D0255588  
    OptionPCLFont  1.02  D0255589  
    animation  1.3.1  D0255568A  
    Fax  01.10.00  D0255569B  
    RemoteFax  01.10.00  D0255564B  
    Printer  1.11  D0255572A  
    RPCS  3.7.5.4.1  D0255574A  
    Option PCL  1.00  D0255580A  
    Scanner  01.17  D0255570C  
    Network DocBox  1.00  D0255567B  
    Web Support  1.06  D0255565B  
    Web Uapl  1.07  D0255566C  
    libcvm(v4)  4.13  D4135765B  
    GWFCU3-13(WW)  03.00.00  D3935570C  
    PowerSaving Sys  1.10  D0255560C  
    Engine 1.51:09 D0255117E 
    OpePanel 1.03 D0251492A 
    LANG0 1.03 D0251496 
    LANG1 1.03 D0251496 
    ADF 03.420:02 D3665604 
    Finisher 01.090:03 D3725112
    Best Regards/
    Henrik Plougstad
    henrik(a)pieroth.dk

  • HT201210 trying to download an instal ios 7 on my iphone 4s, after half an hour into the download it came up with a message saying failed and everytime i try again the download doesnt start. tried downloading from itunes aswel but not working. anyone know

    trying to download an instal ios 7 on my iphone 4s, after half an hour into the download it came up with a message saying failed and everytime i try again the download doesnt start. tried downloading from itunes aswel but not working. anyone know why?

    The servers are overloaded. There are a hundred million people all trying to download iOS 7 at one time. Try again later

Maybe you are looking for

  • Dual Monitor Startup Problem on MacPro - Solved

    I have a model 53135LL/A = mid 2010 MacPro with 8 cores, DUAL monitor cards and monitors, 24GB memory, running Lion 10.7.3.  It is important to note that I am also using the Apple bluetooth Magic Mouse and the smaller, bluetooth keyboard (no numeric

  • Login in as SYSDBA

    When I login with this command "Sqlplus SAM/password as sysdba" and do show user, it returned the User is "SYS" is it suppose to return the User is "SAM"? I have set remote_login_passwordfile = Exclusive Select * from V$pwfile_users; USERNAME SYSDBA

  • Hp chromebook and kodak printer

    i have an hp chromebook 14 and for more than a year i have tried to connected to my cloud ready kodak printer without success. please help, i dont have a third device or anything like that it has to be directly from my chromebook to my printer.

  • Student edition Adobe Acrobat XI Pro?

    How do I download my new student edition Adobe Acrobat XI Pro? I have the software download cardwith the serial number. When I go to the download page it is only available as a trial download in Portugese! I am in Australia. This has wasted a lot of

  • PS Elements 5 Wont open RAW files

    PS Elements 5 fails to recognize the NEF files my Nikon D40 collects when shooting RAW.  The software help says PSE5 will only open RAW files from supported cameras.  Is the D40 supported?