Review Not Being Posted?

I love my WP7 and went to review the device and put in a good word for how much I like the OS and the phone.  However, my review has never been posted and it's been several days since I posted.  As a matter of fact NO reviews for the device have been posted since the 2nd of June!  I thought maybe my original post didn't stick and wrote another only to be given a message stating "You've already given a review and can't give another."  I carefully went through all 80 reviews and sure enough, my review is not posted.
**bleep**?

SmoothDouglas wrote:
I love my WP7 and went to review the device and put in a good word for how much I like the OS and the phone.  However, my review has never been posted and it's been several days since I posted.  As a matter of fact NO reviews for the device have been posted since the 2nd of June!  I thought maybe my original post didn't stick and wrote another only to be given a message stating "You've already given a review and can't give another."  I carefully went through all 80 reviews and sure enough, my review is not posted.
**bleep**?
When did you post your review? From watching reviews of phones I have been thinking about purchasing in the past, they are not posted immediately. It appears that every week or so, Verizon checks all submitted reviews for content(language, etc...) and then posts all of them at one time. This usually encompasses several days of reviews at one time. It appears as if this is what is happening. After all, the most recent one was submitted on June 2, and it is only June 6. This certainly falls within that time frame, especially since a weekend falls between those 2 dates. I doubt that Verizon doesn't have anyone reviewing these reviews over the weekend.

Similar Messages

  • APS reviews not being listed

    Wonder why reviews are not being listed when developers don't give all Info and people complain about shortcomings. I for one posted two reviews and they did not get posted. I have bought a lot of programs and am debating if I should continue.

    Same problems here the last couple of days. Very strange behavior is occurring in my listing.
    XML feed is from feedburner at: http://feeds.feedburner.com/otisandearl
    I can iTunes ping this and then the two episodes appear, but after a day they went away (all but the first one.) BTW – if I’m subscribed to it I see them and they download ok.
    Also after almost a week of being accepted to iTunes now, and my podcast does not show up in the proper podcast category (show name is: Otis and Earl – should be in comedy), I can search for it, and it’s there – but does not show up in the browse listing.
    Help… Thanks,

  • How to block particular condition type not being posted

    Hi,
          We don't want a particular condition type ( customized & accruel ) to be posted into accounting when creating a billing. That condition type is deleted and after that this is how it works now.
    1. When a billing is cretaed from a new sale order ( which does not have that condition type ) it works fine.
    2. When a billing is created from a sale order which refers to the old sale order which in turn has this condition type, then this conditon type is posted into accounting.
        Can some one help in this issue so that I want to block this condition type being get posted in accounting. Is there any Userexit or can it be done with other options. I am an ABAPer, please give specific answer.

    Hi Jagadish,
    The reason why we do account determination is that we would want the system to post the  respective amounts to respective G/L accounts automatically.  What amounts to be posted to what G/L accounts is decided by the Account keys .
    Now if for a particular condition type in the pricing procedure  if you remove Account key the system will not post to the G/L accounts. But generally in this case I believe while creating the Bill system will throw an error in account determination.
    For that what you can do is create completely new accont key and assign a provisional G/L account which is not to be included in your Balance Sheet accounts or P & L accounts (can be restriscted by FI Guys).
    But remember to use a completely new oricing proicedure for this case.
    Hope this helps.....
    J Nagesh

  • R/3-XI-MDM : CREMAS not being posted

    Hi Experts,
    i am doing a file to idoc scenario in which i am giving the xml file from MDM ,consisting of Vendor Master data and posting the address and the general data into the ADRMAS and CREMAS idocs into the R/3 system.
    The problem that i am facing is that the ARMAS is getting posted correctly but the CREMAS is getting posted with the red signal,status 51.It says "Not authorized to change the Vendor Centrally."
    Can anyone please tell me what is the reason and the solution for this problem?
    Is this a data error or XI error or MDM error?
    Thanks in advance,
    Shweta.

    Hello Shweta,
    It is not either MDM or XI related.
    I think that the problem which you are getting is related with the authorization.
    The User ID which you are using to post the IDOC is not authorized to make any changes in the Master Data.
    Better ask to the Admin guy or any Basis Consultant to solve this problem.
    Hope this will solve your problem.
    TNR,
    Saurabh...
    Reward if found helpful.

  • Payments are not being posted!!!

    I just tried to buy an iphone6 at the Apple store and found out that my Verizon bill is two months past due and about to be turned off!!  I have been on auto pay for years!  I checked my credit card and yup the payments are posted and up to date.  I even have paper bills confirming my payments.  Nope! - Verizon insists I am past due.  My credit card company is about as frustrated as I am.  I've blocked any further payments to Verizon from my credit card but Verizon is only going to let me keep my service if I bring my payments up to date.  I have a family plan with a newer phone in the plan so I guess my only option is to let them bill me (which they can take me to court for) the early termination fee and go over to AT&T which will cost over $1000 in new phones etc but worth saying good riddance to Verizon.....

    Hi Rezvan,
    That is not possible also this is not required.
    Because unrealized gain/loss we post to Balance sheet adjustment account and Fx gain/loss accounts.
    We don't post any differences directly to sub ledgers.
    you can use F.05 or FAGL_FC_VAL trasanction for Foreign currency valuation.
    where you can have option of valuate the Spl GL too in selection screen.
    Also
    When you select Vendor option in FAGL_FC_VAL, program valuates all the line items including special gl items.
    And this valuation difference can be posted to balance sheet adjustment account which you maintain in OB09.
    Regards
    Atul

  • My app update problem is not being posted

    WHy is the 6 plus having app update problems

    Because there is no problem for others.  Why are you using iOS 8.1 - current version is 8.3.  Jailbroken?

  • All day calendar events not being displayed in the notification centre for iphone 5 post ios 7 upgrade. Please help. Is it a bug?

    All day calendar events not being displayed in the notification centre for iphone 5 post ios 7 upgrade. Please help. Is it a bug?
    With iOS 6, the all day events showed up in the notification centre but it lacks in the upgrade iOS 7.

    Same problem here. Some people pointed out that all-day events do show up in their notification center, but that seems only to be the case for birthdays (and only as text like the weather). I've tried it myself on my iPhone and iPad and it did work for birthdays but not for any other all-day events. I already sent this to Apple as a product feedback as well, as should everyone of you. The more people mention it, the faster Apple's going to fix this issue. In its current state, notification center is not a very helpful feature in my opinion. There's absolutely no point in not showing all-day events in the 'today' calendar overview.
    Here's a link to the product feedback page: http://www.apple.com/feedback/
    I posted my message in the iPhone section since I couldn't find a page specifically dedicated to iOS 7.
    I really love the look & feel of iOS 7 but it's kinda sad to see notification center not tapping its full potential.
    Cheers!

  • The "Roman" font is not being recognized in Firefox 4.0. As such, I cannot read any previously posted topics or post any new topics on websites using this font.

    The "Roman" font is not being recognized in Firefox 4.0. As such, I cannot read any previously posted topics or post any new topics on websites using this font.

    I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
    When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
    At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
    I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

  • Why is my billing information not being review correctly...like it sayes my apple id has not yet been used in the itune store and it tells me to review my account info but for some reason it doesnt work

    why is my billing information not being review correctly...like it sayes my apple id has not yet been used in the itune store and it tells me to review my account info but for some reason it doesnt work

    Hi there ethangabe,
    You may find the information in the article below helpful.
    Using an existing Apple ID with the iTunes Store, Mac App Store, and iBooks Store
    http://support.apple.com/kb/ht2589
    -Griff W. 

  • Email messages from my personal email account are being posted (copied) to SMS messages.  I have a new cell device, and this is happening on the new device also.  The copy/forward to SMS is NOT being initiated by my email provider.  How do I end this?

    Email messages from my personal email account are being posted (copied) to SMS messages.  I have a new cell device (swtched from Droid to iPhone) and this is happening on the new device also.  The copy/forward to SMS is NOT being initiated by my email provider, and not by Gmail.   How do I end ûVerizon's forwarding my personal email to SMS? 
    Thanks.

    Maybe I'm missing something but how can Verizon have control over your personal GMail account?  Sounds like you do have your email set up to forward to sms. 
    I have certain emails that are forwarded to me as SMS but that is an option that is enabled on the email side of things and is independent from Verizon.

  • Request to post Icloud not working locations. for 2 days almost from Ventura CA. I think they are not being truthful about th eamount of folks affected!

    request to post Icloud not working locations. for 2 days almost from Ventura CA. I think they are not being truthful about the percentage of folks affected!
    and what's with the minimalist response? We're working on it for 2 days? You can do beter than that for exsisting loyal customers can't you?

    I just spoke to a Support person with Apple.  I got the same answer, "We Don't Know", "but they are working on it...Blah, Blah.  I too live in Ventura, and have been without email since yesterday approx. 3:00 pm.
    The guy said, it's the same if you brought your computer into the shop.  We have to determine if it's hardware, or software, then fix the problem.
    Well, What about a BACK UP SERVER?  No real answer to that one.  Just, "Thanks, for your Patience."
    This really blows!!!

  • Period is closed for posting or correct document type is not being used

    Hi All,
    I am trying to post transaction in AB01. But i am getting below error.
    I have checked OB52 and the periods for "+" & "A" are open for 2012.
    Error:
    Period is closed for posting or correct document type is not being used.
    Please assist

    document type i am using is AA.check it other side entery documenttype period open or not

  • Document type with posting level 12 not being carryforward

    Hi gurus,
    We are now implementing SEM-BCS 6.0 in the BI 7.0 server.
    We have a document type u201CMIu201D which properties are:
    Posting level: 12
    Balance check: 0 error when balance note equal to zero
    Application: Other
    Posting: Manual posting
    Inversion: No automatic inversion
    The problem is that when we execute the Balance Carryforward in the subsequent year this is the only document type that is not being carryforward.
    Why is this happening?
    Thanks for your help.
    Best regards.

    This is by design
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/0c/ab0240536fe369e10000000a155106/content.htm
    "Data records for preparatory postings for consolidation group changes are neither translated nor carried forward."
    I'll try an example...
    Company A is sold from company 1 to company 2 in June (EoP)
    For periods 0 - 6:
    BCS reports company A's balance sheet under company 1
    BCS reports company A's income statement under company 1
    starting period 7
    BCS reports company A's balance sheet under company 2
    BCS reports company A's 0 - 6 income statement under company 1
    BCS reports company A's 7 income statement under company 2
    this is managed through the posting level 02 12 and 22 document types, as well as PL30 if using CoI.
    Assuming the period of first consolidation and period of divestiture were set correctly in the groups for company 1 and company 2, BCS wants to read all 0 - 6 data under group 1 and all 7 + data under group 2.  This is obviously incorrect from an accounting standpoint and the PCC postings correct that.
    So BCS books a PL02/12/22 in group 1 to zero out the balance sheet.  It then books another set of entries in group 2 to write up the entire balance sheet in the new group.
    However, once you get to the end of the year and run your BCF, the entire balance sheet is now sitting in period 0. The system is able to report company A's balance sheet under group 2 withou the aid of the PCC documents.  Therefore, the system does not roll these documents forward into the new year.
    The PCC documents were only required because of the periodic nature of the BCS data storage vs. the LTD nature of the balance sheet for reporting.  Once the full LTD balance is available in a single period, as is the case just after a BCF, the PCC documents are no longer required.
    Anyway, hope that made some sense.  If not, I'd encourange you to create an Excel sheet replicating how BCS stores the data in the cube, perfrom a divestiture, and see why the system is not carrying forward the documents.  This is how I came to understand it.
    Now, if you're doing something "non-standard" with the PL12, all bets are off
    Good luck,
    Chris

  • GL Doc not being allowed to be posted.

    Hi Gurus,
    I am entering a GL doc thru FB50. The entry is Advertisement A/c Debit, To Bank.
    The amount is 90000 & I have selected an Input Tax rate of 7%.
    The problem is, when I amtrying to Simulate, I am getting a message that "Posting is only possible with a Zero balance".
    Please help, as I am not being allowed to Post.
    Warm Regards,
    Debojit Dey

    I have the same problem , in fact the iOS7 causes a problem of heating because of the insanely fast draining of the battery and the WiFi chip just goes off to prevent any damage , the thing should be fixed in the next patches
    The thing that could work would be to heat the jack plug which si just next to the WiFi chip until you get the "Heating Warning" signal on your screen. For the people who tried it , it worked and it's permanent I think , so if apple doesn't move his lazy *** by making a bug fix , that's what i'll try before sending it to a genius bar.

  • I`m trying to develop an optimistic concurency based on the Etag Header. This header is being sent OK on every GET request, but NOT being sent on a POST. Why?

    I`m trying to implement an optimistic concurrency control over a web application entities.
    I`m attaching an Etag HTTP Header to every URI that represents an entity.
    On successive GET requests this header is being sent back as If-None-Match (witch is OK)
    The PROBLEM is on a POST request, the ETAG is not being sent back (neither If-None-Match, If-Match, etc..).
    My question is : Is this the desired behavior? The browser omits this on purpose on a Http POST?

    Hi Daniel,
    Do you still have this problem ?
    (If you found a solution a link to that may help others)

Maybe you are looking for