Review on Update 4.0.4 for ARC S [Thanks to SONY]
Hi All. I think Sony released the 4.0.4 update for ARC S in Greece, Philippines and 2 more countries so far. Yesterday I updated manually using the flashtools. I flashed the update firmware which was released for Greece. Now here are the results.
It is much more smoother than the 4.0.3
No overall lags noticed till now.
Animation and screen rotations are smooth.
Battery life is quite good compared to the earlier ICS release. I am loosing 1% only per hour in idle mode.
HD playback is fine, no lags like we had in 4.0.3
WiFi connectivity problem solved.
Home Launcher lags gone completely.
The Device boots faster than the 4.0.3
Baseband 72, and the kernel seems to be well synced with the firmware this time.
Games are working well, except few HD ones. [I think ICS has a issue with backward compatibility, so gaming will take some time]
Phone charges really quick.
LED notifications and WiFI hotspot are working well.
I have rooted the device as well removed some bloatwares and the device is flying high. Rooting is easy just like any other time.
This is for locked bootloader [credit goes to Overlo4d @XDA for the trick]
First flash the 4.0.4 firmware.
Then Flash the Kernel from 4.0.3
Root using Doomlord script for ICS 4.0.3
Rooting Done!
Then Flash back the original Kernel from 4.0.4 and the root will still be there. No problem whatsoever.
Now the CONS:
Dial pad lags still there, now it takes 2-3 seconds to open up, earlier it was 4/5 seconds.
Camera and Camcorder features and quality are the same, and the camera interface shakes/stutter a lot while recording video.
No new widgets. [I don't mind]
No UI changes or graphical enhancements
If you open contacts once, then it will be running behind occupying 20-25 MB memory always. It's a little annoying.
No new KERNEL as SONY already stated that, they won't be upgrading the kernel for 2011 Xperia Lines.
Data traffic drop randomly on 2G network. General voice call signal is fine.
I am happy overall, cause there's barely any LAGS exists in this update.
Message was edited by: Auni
Technically Flashing a firmware by your own may cause some troubles with the warranty statement by SONY.
Because while flashing, if anything goes wrong and then you take the device to SONY service centre, then i am sure they would defenitley able to understand the issue and you may have some problem with your warannty claim.
But according to me if anything goes wrong, we just need to flash the device again that's all. Everything will be fine. I play around with my device a lot, so do not cared about warranty that much.
No offence.
Similar Messages
-
Just downloaded latest updates to Camera Raw for use with my new Sony RX100 M3 but still can't get the RAW files to open. Any suggestions?
Never mind, I finally got it working, thanks!
-
There is a lot of talk about the Java security issues and the ability to download an apple patch fix, do i need to do this or will software update pick this up for me?
Thanks for that, how do I establish if I have Java installed as on Safari preferences it indicates the following
Web content - Enable Java
- Enable JavaScript -
Revision: 3539
Author: [email protected]
Date: 2008-10-09 10:58:31 -0700 (Thu, 09 Oct 2008)
Log Message:
Updated RadioButtonGroup to account for recent changes to LayoutManager priority queue. The order that a RadioButtonGroup was traversed was always dependent on what order that the radio buttons properties were validated. Since this assumption no longer holds true, we are now very specific about how the group orders the RadioButtons (breadth-first for consistency with Flex 2 and Flex 3).
Check-in Tests: Pass
Mustella Tests: (RadioButton, RadioButtonGroup) Pass
Reviewer: Glenn
QA: Yes
Bugs: SDK-17248
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-17248
Modified Paths:
flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/RadioButtonGroup.asRevision: 3539
Author: [email protected]
Date: 2008-10-09 10:58:31 -0700 (Thu, 09 Oct 2008)
Log Message:
Updated RadioButtonGroup to account for recent changes to LayoutManager priority queue. The order that a RadioButtonGroup was traversed was always dependent on what order that the radio buttons properties were validated. Since this assumption no longer holds true, we are now very specific about how the group orders the RadioButtons (breadth-first for consistency with Flex 2 and Flex 3).
Check-in Tests: Pass
Mustella Tests: (RadioButton, RadioButtonGroup) Pass
Reviewer: Glenn
QA: Yes
Bugs: SDK-17248
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-17248
Modified Paths:
flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/RadioButtonGroup.as -
Revision: 14640
Revision: 14640
Author: [email protected]
Date: 2010-03-09 06:44:21 -0800 (Tue, 09 Mar 2010)
Log Message:
updating the ignore patterns for frameworks/libs, projects/automation_airspark, and rsls
QE notes: no
Doc notes: no
Bugs: sdk-25755
Reviewer: carol
Tests run: no
Is noteworthy for integration: no
Ticket Links:
http://bugs.adobe.com/jira/browse/sdk-25755
Property Changed:
flex/sdk/branches/4.x/frameworks/libs/
flex/sdk/branches/4.x/frameworks/projects/automation_airspark/
flex/sdk/branches/4.x/frameworks/rsls/Thats good news.
-
[svn:fx-trunk] 9646: update ASDoc @copy tag for skin part
Revision: 9646
Author: [email protected]
Date: 2009-08-26 10:59:49 -0700 (Wed, 26 Aug 2009)
Log Message:
update ASDoc @copy tag for skin part
QE notes: -
Doc notes: -
Bugs: -
Reviewer: -
Tests run: -
Is noteworthy for integration: No
Modified Paths:
flex/sdk/trunk/frameworks/projects/spark/src/spark/skins/spark/ApplicationSkin.mxmlFYI - This regression has been filed here: http://bugs.adobe.com/jira/browse/SDK-31989
-
I am attempting to upload a manually edited WADConfig xml to my VM. The WAD service is functioning correctly, I needed to add some custom WinEventLogs. The prescribed steps result in an error.
What am I overlooking?
I am following these instructions:
Step 5: Remotely install Diagnostics on your Azure Virtual Machine
azure.microsoft.com/en-in/documentation/articles/cloud-services-dotnet-diagnostics/#virtual-machine
$storage_name = "wadexamplevm"
$key = "<StorageAccountKey>"
$config_path="c:\users\<user>\documents\visual studio 2013\Projects\WadExampleVM\WadExampleVM\WadExample.xml"
$service_name="wadexamplevm"
$vm_name="WadExample"
$storageContext = New-AzureStorageContext
-StorageAccountName $storage_name -StorageAccountKey $key
$VM1 = Get-AzureVM
-ServiceName $service_name -Name $vm_name
$VM2 = Set-AzureVMDiagnosticsExtension
-DiagnosticsConfigurationPath $config_path
-Version "1.*"
-VM $VM1 -StorageContext $storageContext
$VM3 = Update-AzureVM
-ServiceName $service_name -Name $vm_name
-VM $VM2.VM
Unfortunately, I am receiving this error:
Update-AzureVM : BadRequest: Invalid update to extension reference for role: XXXXXX and reference: IaaSDiagnostics.
What's missing from the above script?Hi,
Since Azure SDK 2.5 uses the extension model the diagnostics extension, the configuration and the connection string to the diagnostic storage are no longer part of the deployment package and cscfg. All the diagnostics configuration is contained within the
wadcfgx. The advantage with this approach is that diagnostics agent and settings are decoupled from the project and can be dynamically enabled and updated even after your application is deployed.
Due to this change some existing workflows need to be rethought – instead of configuring the diagnostics as part of the application that gets deployed to each environment you can first deploy the application to the environment and then apply the diagnostics
configuration for it. When you publish the application from Visual Studio this process is done automatically for you. However if you were deploying your application outside of VS using PowerShell then you have to install the extension separately through
PowerShell.
There PowerShell cmdlets for managing the diagnostics extensions on a Cloud Service are -
Set-AzureServiceDiagnosticsExtension
Get-AzureServiceDiagnosticsExtension
Remove-AzureServiceDiagnosticsExtension
You can use the Set-AzureServiceDiagnosticsExtension method to enable diagnostics extension on a cloud service. One of the parameters on this cmdlet is the XML configuration file. This file is slightly different from the diagnostics.wadcfgx file. You can
create this file from scratch by either following the article that you are referring to or you can modify the wadcfgx file and pass in the modified file as a parameter to the powershell cmdlet.
To modify the wadcfgx file –
Make a copy the .wadcfgx.
Remove the following elements from the Copy:
<DiagnosticsConfiguration xmlns="http://schemas.microsoft.com/ServiceHosting/2010/10/DiagnosticsConfiguration">
<PrivateConfig xmlns="http://schemas.microsoft.com/ServiceHosting/2010/10/DiagnosticsConfiguration">
<StorageAccount name=" " endpoint="https://core.windows.net/" />
</PrivateConfig>
<IsEnabled>false</IsEnabled>
</DiagnosticsConfiguration>
Make sure the top of the file still has xml version and encoding –
<?xml version="1.0" encoding="utf-8"?>
Effectively you are stripping down the Wadcfgx to only contain the <PublicConfig> section and the <?xml> header. You can then call the PowerShell cmdlet along with the appropriate parameters for the staging slots and roles:
$storage_name = ‘
<storagename>’
$key= ‘<key>’
$service_name = '<servicename>'
$public_config = '<thepublicconfigfrom_diagnostics.wadcfgx>'
$storageContext = New-AzureStorageContext –StorageAccountName $storage_name –StorageAccountKey $key
Set-AzureServiceDiagnosticsExtension -StorageContext $storageContext -DiagnosticsConfigurationPath $public_config –ServiceName $service_name -Slot ‘Staging’ -Role ‘WebRole1’
Hope this helps !
Regards,
Sowmya -
Getting error U44M1P7 on installing Photoshop update 13.1.2 for Creative Cloud
Hi,
I'm getting errorcode U44M1P7 on installing Photoshop update 13.1.2 for creative cloud.
Anyone having the same problem or better..... anyone knows the solution ?
Gr. Jeroen LesSorry to bother you.
I could find the answer after searching previous posts about this language problem.
Had to change my language in AAM profile and then download PS CS6 again ( english version ).
Then open the actual Photoshop and in preferences > interface you can besides the Dutch also option for English.
restart application and Voila.
Greetz, Jeroen -
I need help installing update 13.1.2 for Photoshop creative cloud, installation fails with error code: U44M1P7. Could someone please help?
Sorry to bother you.
I could find the answer after searching previous posts about this language problem.
Had to change my language in AAM profile and then download PS CS6 again ( english version ).
Then open the actual Photoshop and in preferences > interface you can besides the Dutch also option for English.
restart application and Voila.
Greetz, Jeroen -
Software Update Server - Deleting old updates to make space for new ones
On Page 77 of the SystemImage_and_SW_Updatev10.4.pdf Apple recommends "deleting old updates to make space for new ones". I've looked and searched and yet to find a way to do this. The Server Admin interface and the command line options I've looked into don't appear to provide this option.
So I actually tried stopping the server, moving the updates from /usr/share/swupd/html to another location, starting the server, the server wouldn't start, moving the files back again, the server still won't start.
1. Does anyone know how you're supposed to "Delete old updates to make space for new ones"
2. Does anyone have any suggestions as to how to get Software Update service running again?
Power Mac G5 Mac OS X (10.4.7)Does this article contain anything useful?
(16738) -
When trying to update apps it asks for account password but it doesn't show my account ID, it shows my dad's. How can I fix this so I can sign in?
It sounds like the apps were purchased using your dads account, so they will have to be updated using that account.
-
My AppStore id is my apple id n password which is good when purchasing. But when I am updating from update option it ask for a password. The user id I see there is not mine, it's different. How do I change that to my apple Id? Please help me resolve this issue. I have tried resetting it but nothing... Either I'm doing something wrong or....
I believe the issue is with the Apple ID that was used to purchase the App. If you download an App that was purchased under a different Appple ID then all updates will also be linked to the original purchaser's Apple ID. Your Apple ID is the the same ID as your iTunes, iCloud, etc. Some folks use different ID for the different Apple sites. No need for that One ID for all Apple Sites, and if someone else buys an App using their ID and they(you) download that App onto your device and that App requires an update it will ask for the purchasers Apple ID. This happens a lot when folks sell their iPad or give it to someone else and leave some purchased(free) Apps on the iOS device. You cannot change the original ID the App was purchased under. A suggestion would be if someone else has an App that you like but do not want to pay for use their ID or in the future have them gift the App to you.
-
Please update the functional specifications for Vendor Balance Report
Dear All,
Please update the functional specifications for Vendor Balance Report with
proper descriptions.
Please include
1. How your selection screen should look like..
2. Output format ( in an excel sheet)
3. Logic for every field in the output format (viz. .. how do link the
vendors from the selection screen to the BKPf and BSEG tables, how do you
find open and closed items in BSEG , etc.)
Please avoid statements like 'The total value of all the break-up should
tally with the balance as shown in FBL1N for a given vendor for the given
day.'
You need to give the logic for the FBL1N, in that case.
Regards
Rama MohanHello again,
Regarding having them update the specs, one can dream. Dreams are free. LOL. Hopefully the memory makers will update their specs as more makers start supporting a large memory configuration.
The 4GB sticks I am using are http://shop.kingston.com/partsinfo.asp?ktcpartno=KTL-TP667/4G
I did not do an extended test of the sticks in my MBP. Their home is in the ThinkPad I have because it is running Windows Server 2008 with Hyper-V.
As you can see from the link above, these little suckers are pricey. But consider the price of 2GB SoDIMMs were $950 when they entered the market a couple of years ago. The price will drop.
I asked the Kingston rep that sent these to me if online sites like newegg.com would have them soon. She indicated no, but the corporate buying sites like CDW and Zone would. So check around. They just started shipped a couple of weeks ago so be patient.
If you have any other questions, please stop by http://blogs.technet.com/keithcombs/archive/2008/07/05/testing-my-apple-macbook- pro-with-8gb-of-ram.aspx and ask there. I'll see them much more quickly.
Cheers,
Keith Combs
Microsoft -
problem updating to iphoto 9.6 after upgrading to Yoesmite I am getting the following message when I try top date iPhoto This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or canc
"This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled." ?
This error message will appear erraneously, if you skipped the update to Mavericks and iPhoto 9.5.1 and went straight from an earlier MacOS X version to Yosemite, without first updating to iPhoto 9.5.1 and associating iPhoto to your AppleID.
Try first to buy iPhoto with your AppleID instead of updating. Delete iPhoto from Applications, but don't empty the Trash, then go to the main page of the App Store and search for iPhoto. If you are lucky, it will show as free and you can buy it directly.
If iPhoto is not showing as free, there is no help but contacting the App Store Support: Ask for a redemption code. You will need to provide a prove of purchase for your mac with iPhoto preinstalled.
http://www.apple.com/support/mac/app-store/contact/ -
I just did a software update that was apparently for iPhoto. When I try to open iPhoto it stops at "step 5" and will not go further. what do I do?
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD
Maybe you are looking for
-
reminder for downloading the new version of flash player continues to happen. I have downloaded and installed it and I get an alert that it has already been installed and do you want to replace it. What is going on with this.
-
Forms pulling Multiple Records from an XML Schema and XML data files - Adobe LiveCycle Designer
I built a form in Adobe LiveCycle with an xml schema and data file. The problem is with how the form renders the xml data file. I have a statement element that consists of about 6 fields (statementID, statementName, statementAddress, statementCountr
-
How can I close core thread in ThreadPoolExecutor?
If I use unbounded LinkedBlockingQueue in ThreadPoolExecutor and set the core pool size to 5. When more than 5 tasks are submitted, there will be 5 threads created to handle the request. After finish, these threads will not be closed. How can I make
-
I am THINKING that I am reading that neither imovie 8 nor FCE 4 can directly import an mpeg-1 file (which is what my Sony camera records). If I take it through Mpeg streamclip does it degrade the video? If so is there any way I can get it into these
-
I need to read a long text from MM03, view - Sales Text. I cannot use FM READ_TEXT as there is no header data available there. How do i do it?