Review Process not working for me

Hi All
We recently purchased Adobe Acrobat X to aid in tracking changes on documents and providing comments.
We use windows 7 and have been using acrobat.com to track the changes.
In the Tracker section, the documents that i have created all have local file paths to somewhere on my PC. Where as the reviewers point to https/acrobat.com/somethingeomthing. When we access that link we can see the reviews, comments etc, but it never updates the local file on my PC. Now im not too sure whether it is supposed to update my PC, or whether im supposed to look at it through the link, but to me it defeats the purpose of this if i cant have it in sent to me. Being an IT guy/Web developer and using SVN software and seeing how easy that works compared to this, im thinking we have wasted our money on this product.
When i open the local document through tracker, and clikc on check for new comments, nothing comes thru, even though i know the girl sitting next to me just published new comments to the doc...
Thanks for any help in getting this working.
andy

Hi Andy,
I am trying to investigate this issue but I havent been able to reproduce it. It would be great if you could give me a few inputs.
1) Are you able to Publish Comments in the review?
2) Is there any internet traffic monitoring tool running on your machine?
3) Close Acrobat and then try killing the AdobeCollabSync.exe from task manager. Now open the review file again and try to sync the comments. Does this work?
4) Try downloading a fresh copy of this file from Acrobat.com server and replacing your local copy with it.
If all these things do not work then maybe we can analyze the traffic (using fiddler) on your machine to investigate the problem.
Thanks,
Abhilasha

Similar Messages

CALLER ID not working for International incoming calls

Hi,
I've a strange issue where CALLER ID not working for International incoming calls, it shows INTERNATIONAL UNKNOWN NUMBER in the phone display, but the number shows correclty in Verizon Call assistant !!!
Any clue?

yashshankar wrote:
Hi
I recently purschased an Online number but the caller id does not work for incoming calls.How do we resolve this problem?.
Regards
Yash
You didn't mention what country your Online Number is in. Not all of Skype's Online Numbers are eligible for use as Caller ID when calling telephones or sending SMS messages. If your number is from one of these countries (Chile, Denmark, Estonia, Hong Kong, Poland, Sweden, the UK and the US), then it can be used this way. Otherwise, you can use a mobile number from countries other than Japan or Mexico as Caller ID with Skype, after the number goes through a verification process where Skype sends SMS messages with codes to that number.
To get to these settings, log into your Skype account here on the Skype web site using the "Account" link at the top of this page. You'll see a screen that would include your current Caller ID settings, and a link to change that. If your Online Number is from one of those countries I referenced above, just select it and you're done.
Hope that helps!
Patrick
Location/Ubicacion: Arizona USA
Time Zone/Hora Local: UTC/GMT -7
If this message has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.
Si esto mensaje le ha ayudado, por favor haga clic en "Aceptar como solución". Si encuentra un mensaje útil, por favor "Da Kudos" al final del mensaje, por lo que esta información puede beneficiar a otros.
I am not a Skype employee. No soy un empleado de Skype.

Software Update Point Switching is not working for some Clients

Hi there,
I found nothing similar here and I hope this is the right section.
I´m running ConfigMgr 2012 R2 where one of the Site Systems from one of the Primaries is located in an untrusted Forest in a perimeter Network. The Site System there has the MP, SUP and DB Roles. In general it works great. The Systems in that untrusted Forest
get the SCCM Agent pushed, see and can install published Software packages and receive Windows Updates. But there are a few systems where everything works, except Windows Updates.
So I had a deeper look at what is happening and found out that the SUP switching is not working for them. They always try to contact the SUP from the Primary, which they cannot reach (this is intended).
From how I understand SUP switching as described here
http://blogs.technet.com/b/configmgrteam/archive/2013/03/27/software-update-points-in-cm2012sp1.aspx#pi140062=1
the Windows Update Agent tries to connect to a SUP every 30 minutes and after 4 failed attempts he will try to connect to the next one until he finds one which works.
As I said before, this seems to work for most systems in the untrusted forest, but some do not make any intentions to switch the SUP.
So my next step was to find out from where the Update Agent can get the information of the available SUPs. I think they either don´t receive the information that other SUPs exist, or if the Information is there, they don´t realize that there´s an error and
make no attempt to switch.
I used the System Center Support Center to gather all Information from some of the systems with that problems (Log Files, WMI information, registry information, policies etc.) but I cannot find where SCCM or the Update Agent store the information which SUPs
are available in my environment.
I´m sure the problem is on the Systems which fail to connect to the right SUP and not in the SCCM infrastructure itself, because for most of the systems everything is working just perfect. Unfortunately in the Blog Post above there´s also no information
where this information is stored and how it is obtained by the clients. In the comments there´s even one post which describes the same problem I have here, but there was no answer. I hope someone can point me into the right direction, because I´m stuck currently.
Things I tried additionally to all the log file / WMI / registry sniffing:
Removing the Software Distribution Folder and restarting the Windows Update Agent
Removing the WindowsUpdate Registry folder in the HKLM\SOFTWARE\Policies\Windows section in the Registry and restarting the Windows Update Agent.
Tried to reset the WUAgent with wuauclt /Resetauthorization additionally to the steps above.
I also tried to manually set the WUServer and WUStatusServer Keys in the registry to the new Server, but as soon as the next Update Scan cycle runs, the value is set back to the URL of the Primary Sites SUP
Is someone having additional ideas? It seems to me older systems are more affected (which were configured for a standard WSUS before SCCM 2012 was deployed) than newer ones which were installed when SCCM was in place already. But I don´t know what else to
"reset" on those machines without reinstalling them.

Thank you very much for your response. I must have missed that one by looking through numerous Logfiles. In this, there´s indeed a list of all available SUPs. So according to the LocationServices.log the machine should have a choice.
The WMI Key however, contains just one entry and this is the URL of the Primaries SUP which is not reachable in the untrusted forest. Is it OK that the WMI entry includes only one entry? If yes, what process is putting the results from the LocationServices
into WMI? It seems like the Windows Update Agent is feeded from the WMI Key then. If this is the case my problems seems to be the "communication path" between these two components.
Is this the job from the SCCM Agent, the Windows Update Agent or maybe some third component I´m not aware of? I wonder how I can fix this.

Image Processor not working for me. Help!

In a nearby thread I've reached a stumbling block. Image Processor in CS4's PS is not working for me. I have a folder of psd's generated on the fly via File > Export > Data Sets as File... and now I'm trying to process those psd's to generate a JPEG of each. The only strange characteristic of the auto-generated PSD files is that there is no image preview available within the Finder. When a psd is selected the preview pane reads:
"This layered Photoshop file was not saved with a composite image"
I've verified in my Preferences > File Handling that image previews are always saved. (But I've been using PS for a long time and previews are always available with all my manually saved work.)
So here's what happens when I invoke File > Scripts > Image Processor...
In section 1 of the menu I select the source folder where the psd files reside
In section 2, I select 'Save in same location'
In section 3, I select 'Save as JPEG'
In section 4, I change nothing. No special actions. Include ICC profile is checked.
When I select run I get an error message: "Sorry, I could not process the following files:"
And then it lists what appears to be 3 lines per psd file in the source directory:
The path to the source dir
The name of the source dir
The [source_dir]/[filename.psd]
What am I doing wrong?

mrdior wrote:
I have a folder of psd's generated on the fly via File > Export > Data Sets as File... and now I'm trying to process those psd's to generate a JPEG of each. The only strange characteristic of the auto-generated PSD files is that there is no image preview available within the Finder. When a psd is selected the preview pane reads:
The part I don't understand is the "export" Part. File > Export > Data Sets as File.. on my machine is grayed out so I don't know how this feature is used. Is Export > Data Sets as File... used with CSV data sets and Photoshop variables?
Check your Photoshop preferences and make sure you have set in the file handling tab "Maximize PSD and PSB File Compatibility:" to Always using the pull down menu. If that is not your current setting try setting that to see if the exported PSD files contain composite previews. When I use save as PSD on my system I alway see Photoshop save through up a popup window stating generating composite preview image.

Cascading Select Lists - Not Working for me

I am trying to implement Denes Kubicek's Ajax Cascading Select List solution.
http://apex.oracle.com/pls/otn/f?p=31517:119
But it is not working for me.
I'm a newbie to APEX and checked the forum for advice on cascading select lists. I saw the thread for
"Cascading Select Lists - Not Working" posted by sue and the replies by Varad Acharya, but I'm still
having issues of not seeing the alerts, not able to run the pl/sql process in SQL Workshop, and not
getting the expected results.
I have a list of countries (US - USA, CA - CANADA, etc.) and a list of states for each country. When a
user selects a country I would like to show the list of states within that country.
This is what I've done so far:
Defined an application process:
Process Point: On Demand: Run ... by a page process.
Name: CASCADING_SELECT_LIST1
Process Text:
BEGIN
OWA_UTIL.mime_header ('text/xml', FALSE);
HTP.p ('Cache-Control: no-cache');
HTP.p ('Pragma: no-cache');
OWA_UTIL.http_header_close;
HTP.prn ('<select>');
HTP.prn ('<option value="' || 99 || '">' || '- All States -'
|| '</option>'
FOR c IN (SELECT state_code || ' - ' || state_desc d, state_code r
FROM tbk_state
WHERE country_code = :cascading_selectlist_item_1)
LOOP
HTP.prn ('<option value="' || c.r || '">' || c.d || '</option>');
END LOOP;
HTP.prn ('</select>');
END;
defined and application item:
Name: CASCADING_SELECTLIST_ITEM_1
Build Option: - No Build Option -
Created a 'Form on a table with report' as follows:
Page 5: Report on TBK_HARDWARE_LOCATION
Page 6: Form on TBK_HARDWARE_LOCATION
in HTML Header of the page attributes for 'Form on TBK_HARDWARE_LOCATION' I have:
<script language="JavaScript" type="text/javascript">

</script>
<script>
function get_select_list_xml1(pThis,pSelect){
var l_Return = null;
var l_Select = html_GetElement(pSelect);
alert ('Dept no=' + pThis.value);
var get = new htmldb_Get(null,html_GetElement('pFlowId').value,
'APPLICATION_PROCESS=CASCADING_SELECT_LIST1',0);
get.add('CASCADING_SELECTLIST_ITEM_1',pThis.value);
gReturn = get.get('XML');
// gReturn = get.get();
alert('Enames=' + gReturn);
if(gReturn && l_Select){
var l_Count = gReturn.getElementsByTagName("option").length;
l_Select.length = 0;
for(var i=0;i<l_Count;i++){
var l_Opt_Xml = gReturn.getElementsByTagName("option");
appendToSelect(l_Select, l_Opt_Xml.getAttribute('value'),
l_Opt_Xml.firstChild.nodeValue)
get = null;
function appendToSelect(pSelect, pValue, pContent) {
var l_Opt = document.createElement("option");
l_Opt.value = pValue;
if(document.all){
pSelect.options.add(l_Opt);
l_Opt.innerText = pContent;
}else{
l_Opt.appendChild(document.createTextNode(pContent));
pSelect.appendChild(l_Opt);
</script>
On Page 6: 'Form on TBK_HARDWARE_LOCATION' I have the following items (plus some others):
Name: P6_COUNTRY_CODE
Display as: Select List
HTML Form Element Attributes: onchange="get_select_list_xml1(this,'P6_STATE_CODE');"
Source Used: Only when current value in session state is null
Source Type: Database Column
maintain session state: Per session
Source value or expression: COUNTRY_CODE
Named LOV: LIST OF COUNTRIES
Name: P6_STATE_CODE
Display as: Select List
Source Used: Only when current value in session state is null
Source Type: Database Column
maintain session state: Per session
Source value or expression: STATE_CODE
Named LOV: - Select named LOV -
List of Values definition:
     select state_code || ' - ' || state_desc d, state_code r
     from tbk_state
     where country_code = :P6_COUNTRY_CODE
     order by 1
LIST OF COUNTRIES is defined as:
select country_code || ' - ' || country_desc d, country_code r
from tbk_country
order by 1
Now to the problem:
I run page 5 (the report) to see the list of locations and then I try to edit a record (page 6). When I
try to select a different country I get the following error (on IE):
"Problems with this web page might prevent it from being displayed properly or functioning properly.
In the future, you can display this message by double-clicking the warning icon displayed in the status
bar.
Line: 17
Char: 5
Error: Object expected
Code: 0
URL: http//cmrac4.cm.timeinc.com:7777/pls/htmldb/f?
p=114:6:1413254636072443110::::P6_HARDWARE_LOCATION_ID:2
I don't see any of the alert messages.
I also tried to run the application process code in the SQL - Command Processor (I replaced
:cascading_selectlist_item_1 with 'CA' or 'US') and got the following:
The XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh
button, or try again later.
Only one top level element is allowed in an XML document. Error processing resource
'http://cmrac4.cm.timeinc.com:7777/pls/...
<select><option value="99">- All States -</option><option value="X1">X1 - X1</option><optio...
Can someone help me please?

Varad,
First, thank you for taking the time to try to help me with this problem.
When I view the page's source code (here are the first few lines):
<html lang="en-us">
<head>
<script src="/i/javascript/core.js" type="text/javascript"></script>
<link rel="stylesheet" href="/i/css/core.css" type="text/css" />
<script language="JavaScript" type="text/javascript">

</script>
<script>
function get_select_list_xml1(pThis,pSelect){
var l_Return = null;
var l_Select = html_GetElement(pSelect);
//alert ('Dept no=' + pThis.value);
var get = new htmldb_Get(null,html_GetElement('pFlowId').value,
'APPLICATION_PROCESS=CASCADING_SELECT_LIST1',0);
get.add('CASCADING_SELECTLIST_ITEM_1',pThis.value);
gReturn = get.get('XML');
// gReturn = get.get();
//alert('Enames=' + gReturn);
if(gReturn && l_Select){
var l_Count = gReturn.getElementsByTagName("option").length;
l_Select.length = 0;
for(var i=0;i<l_Count;i++){
var l_Opt_Xml = gReturn.getElementsByTagName("option");
appendToSelect(l_Select, l_Opt_Xml.getAttribute('value'),
l_Opt_Xml.firstChild.nodeValue);
get = null;
function appendToSelect(pSelect, pValue, pContent) {
var l_Opt = document.createElement("option");
l_Opt.value = pValue;
if(document.all){
pSelect.options.add(l_Opt);
l_Opt.innerText = pContent;
}else{
l_Opt.appendChild(document.createTextNode(pContent));
pSelect.appendChild(l_Opt);
</script>
It looks like line 17 is:
var l_Select = html_GetElement(pSelect);
I'm still not sure why I'm getting this error and why it's not working?
Thanks,
Eti

Fingerprint utility is not working for normal users - Tecra M11

Hi All,
I installed windows 7 pro in Tecra M11 laptop and the Toshiba finger print utility is not working for normal users.
It is working only for domain administrators. The TFPU is not working for, normal domain users, local users, local administrators. If we run the utility it will ask to enter the windows password and once we applied the password then the message saying "entered password is not valid" will prompt even if we are trying to use the utility first time.
If we try with a domain admin account it will work without any problem. Can somebody help me to trouble shoot this issue?
Thanks.

People nowadays experienced that no matter How many times we glide our finger it have no response.In this instance, you might be very afraid of Windows password lost by reason that there is a plenty of important data on your PC.
Then what should you do? One choose is fix the Fingerprint scanners, but this method will cost a lot of money. The other is use the Windows password function to solve the problem. Certainly, this is a very safer, faster and easier to use method for you.
According my personal experience, you can try these three ways to re-access to your PC:
Method 1: Login with the default administrator account
* Step 1: Start Windows PC
* Step 2: When you can see the Windows login screen, press ctrl+alt+del keys Twice and it'll show Classic Login box
* Step 3: Type Administrator as Username and leave the password field blank
* Step 4: Press the Enter Key and then you can be able to login the default windows administrator account which is it created by default when install windows.
*Note:* This trick is only work for Windows XP. And when you input the key combination Please don't put the cursor on any account. And if you change the name or password before, you cannot login by this way.
Method 2: Use the previous password reset disk
This method describes how to create and use a password reset disk for a computer that is a member of a domain. You can use a Windows password reset disk to gain access to your Microsoft Windows Professional-based computer if you forget your Windows password. Please click here to learn more.
Method 3: Using Windows Password Unlocker
Using Windows password remove software is could be the fastest and easiest way for you to reset your Windows password while you didn't create a password reset disk before.
There are 2 options for you: recover Windows password with a bootable CD/DVD or recover Windows password with a USB flash drive.
Before starting, a bootable CD/DVD or USB flash drive and a computer with CD drive are required. (Internal CD drive and external CD drive are both OK.
Option 1: Recover Windows password by burning a bootable CD/DVD
Option 2: Recover Windows password by burning a USB flash drive
The whole Windows password recovery process can be divided to 3 big steps:
* >> Step 1: Burn a USB flash drive to remove lost Windows password
* >> Step 2: Set your target computer to boot from USB
* >> Step 3: Recover forgotten Windows password with the burned USB flash drive
In fact, all you need is a *Windows Password Unlocker www.passwordunlocker.com/windows-password-recovery.html which can help you directly reset your windows xp password, and then you can login your XP without a password required. Of course, there are also some other ways to do it, but this way may be most convenient one.

Incoming Email not working for one web app, but IS working for others in same farm.

I have enabled incoming email in a large multi-web application farm running SharePoint 2013 SP1 and the Feb 2015/March 2015 CUs that were pushed down in Windows Updates. It works just fine for two web applications, but it will not work for one particular
web application. I see the email land in the /drop folder. If I remove the email address from the library in http://nonworkingapp web
application and use it on a library in a http://working web application, then the email is processed successfully. Conversely,
if I take an address from a library in http://working and move it to a library inhttp://nonworkingapp it
does not work. I've tried multiple site collections on http://nonworkingapp. This rules out any SMTP issues, etc. and means
the issue is bound to this web application. Permissions are the same between the "non-working" and "working" locations: domain users are members on the site, and the library inherits permissions from the site. The App Pool and Timer
Service accounts have rights to the folder and to the library.
The error in the ULS log is the typical error processing message, but it gives no additional information even though I have enabled Verbose logging.
The Incoming E-Mail service has completed a batch. The elapsed time was 00:00: 00.0156294. The service processed 2 message(s) in total. Errors occurred processing 2 message(s): Message ID: Message
ID:
Typically, you see "alias not found" or some permissions or quota issue here, but this issue is NOT the same as those. In this case NO additional information is provided in ULS.
Edit: running stsadm.exe -o refreshdms -url http://one/failing/site fixed some similar issues where "Unknown alias" was
reported even though the list did have an alias (see here:http://blogs.technet.com/b/vinitt/archive/2009/07/15/e-mail-enabled-list-alias-information-is-not-synchronized-between-configuration-database-and-content-database.aspx).
This did not fix the issue for the case mentioned above.
What could possibly be the issue preventing incoming email from working on this one web application?

Thanks for your reply. Incoming E-Mail was running on all 3 WFE, however I do not think this was the cause. As noted, _other_ emails send to http://workingapp are working just fine. I can send two emails - one to a library on http://workingapp
and another on http://notworkingapp. The email to http://notworkingapp will sit in the drop folder, while the one to http://workingapp will be processed correctly. In addition, the ULS log on WFE1 indicates an attempt to process the file fails.
So clearly, the timer job on WFE1 is running and attempting to process the file. For kicks, I disabled the service on WFE2 and WFE3, but with no change in the behavior.
WRT to #1, I have done this already (as noted in the original post). I can remove an alias from http://workingapp and place it on http://nonworkingapp and it is not processed. If I return it to http://workingapp it is processed. In other
words, I go into Library Settings -> Incoming Email for a working library, and copy the alias, then disable incoming email for that library. I then go to Library Settings -> Incoming Email for a non-working library, enable incoming email, and paste
the alias. Once done, emails sent to the alias are not processed. I then do the reverse, and it works again.
On #2, I have already tried multiple libraries on http://nonworkingapp (also as noted in the original post).
In my environment, incoming email does not work for any library on http://nonworkingapp, but does work for any library on http://workingapp. Troubleshooting listed above has ruled out any problem with basic mail server configuration or library settings
- the problem is bound to http://nonworkingapp
I'm not sure what you mean by "steps to reproduce the issue". If I knew that, I would probably be able to solve the issue. The best I could come up with to describe the situation would be:
Set up SP 2010 in a three-node configuration with multiple web apps
Enable incoming email and confirm it works
Migrate to a SP2013 SP1 farm in a three node configuration.
Enable a new email alias for a library
Observe that it doesn't work for one web application.
Obviously, it's pretty unlikely that attempting that in a lab would actually have the same result.

Auto To working for one material and not working for other material

Hi,
Hope everybody is doing fine.
I have configured the auto TO. Its working fine for one material and not working for the other material. I checked the material master and wm 1,2 views have the same fileds / values. What could be wrong?
I didn't setup the back ground processing job. Is that is affecting it?
thanks for any help.
regrads,
KHAN

Thnaks,
You are right but then what could be wrong? Its working for one material and not working for otehr material? Any clue?
Appreciate your time charlie

Tacacs not working for 5508

Tacacs not working for 3 new 5508 WLC's...working fine for 6 old 4400 WLC's.
before 7.116 code upgrade...I remember 5508 was working on and off and now they are not.
Same configs on SW, WLC and ACS.
Debug on WLC gives..below message when Tacacs is attempted..
*aaaQueueReader: Oct 25 09:20:41.700: tplus_processAuthRequest: memory alloc failed for tplus
Any pointers for troubleshooting? Not sure why statistics show zero...?? Radius is working for users.
(wlc03) >show tacacs auth statistics
Authentication Servers:
Server Index..................................... 1
Server Address................................... 10.3.121.21
Msg Round Trip Time.............................. 0 (msec)
First Requests................................... 0
Retry Requests................................... 0
Accept Responses................................. 0
Reject Responses................................. 0
Error Responses.................................. 0
Restart Responses................................ 0
Follow Responses................................. 0
GetData Responses................................ 0
Encrypt no secret Responses...................... 0
Challenge Responses.............................. 0
Malformed Msgs................................... 0
Bad Authenticator Msgs........................... 0
Timeout Requests................................. 0
Unknowntype Msgs................................. 0
Other Drops...................................... 0
Server Index..................................... 2
--More-- or (q)uit
Server Address................................... 10.3.121.22
Msg Round Trip Time.............................. 0 (msec)
First Requests................................... 0
Retry Requests................................... 0
Accept Responses................................. 0
Reject Responses................................. 0
Error Responses.................................. 0
Restart Responses................................ 0
Follow Responses................................. 0
GetData Responses................................ 0
Encrypt no secret Responses...................... 0
Challenge Responses.............................. 0
Malformed Msgs................................... 0
Bad Authenticator Msgs........................... 0
Timeout Requests................................. 0
Unknowntype Msgs................................. 0
Other Drops...................................... 0
(wlc03) >show tacacs summary
Authentication Servers
Idx Server Address    Port    State     Tout
1    10.3.121.21     49      Enabled   5
2    10.3.121.22      49      Enabled   5
Authorization Servers
Idx Server Address    Port    State     Tout
1    10.3.121.21      49      Enabled   30
2    10.3.121.22     49      Enabled   5
Accounting Servers
Idx Server Address    Port    State     Tout
1    10.3.121.21      49      Enabled   5
We can ping the TACACS servers...

>show memory statistics
System Memory Statistics:
Total System Memory............: 1028820992 bytes
Used System Memory.............: 458424320 bytes
Free System Memory.............: 570396672 bytes
Bytes allocated from RTOS......: 21939008 bytes
Chunks Free....................: 29 bytes
Number of mmapped regions......: 45
Total space in mmapped regions.: 212779008 bytes
Total allocated space..........: 12015112 bytes
Total non-inuse space..........: 9923896 bytes
Top-most releasable space......: 133800 bytes
Total allocated (incl mmap)....: 234718016 bytes
Total used (incl mmap).........: 224794120 bytes
Total free (incl mmap).........: 9923896 bytes
show buffers
Pool[00]: 16 byte chunks
    chunks in pool:    50000
    chunks in use:     19030
    bytes in use:      304480
    bytes requested:   90479 (214001 overhead bytes)
Pool[01]: 64 byte chunks
    chunks in pool:    40000
    chunks in use:     14519
    bytes in use:      929216
    bytes requested:   566395 (362821 overhead bytes)
Pool[02]: 128 byte chunks
    chunks in pool:    20000
    chunks in use:     7726
    bytes in use:      988928
    bytes requested:   672853 (316075 overhead bytes)
Pool[03]: 256 byte chunks
    chunks in pool:    4000
    chunks in use:     808
    bytes in use:      206848
    bytes requested:   154777 (52071 overhead bytes)
Pool[04]: 1024 byte chunks
--More-- or (q)uit
    chunks in pool:    15300
    chunks in use:     11645
    bytes in use:      11924480
    bytes requested:   4945714 (6978766 overhead bytes)
Pool[05]: 2048 byte chunks
    chunks in pool:    1000
    chunks in use:     189
    bytes in use:      387072
    bytes requested:   355272 (31800 overhead bytes)
Pool[06]: 4096 byte chunks
    chunks in pool:    1000
    chunks in use:     36
    bytes in use:      147456
    bytes requested:   102479 (44977 overhead bytes)
Raw Pool:
    chunks in use:     186
    bytes requested:   156052303
show process memory
Name               Priority       BytesInUse BlocksInUse    Reaper
cslStoreManager    (240/ 7)              0            0      ( 0/ 0)%
System Reset Task (240/ 7)              0            0      ( 0/ 0)%
reaperWatcher      ( 3/ 96)              0            0      ( 0/ 0)%   I
osapiReaper        ( 10/ 94)              0            0      ( 0/ 0)%   I
TempStatus         (240/ 7)            424            1      ( 0/ 0)%   I
pktDebugSocketTask (255/ 1)              0            0      ( 0/ 0)%
LICENSE AGENT      (240/ 7)           2228           85      ( 0/ 0)%   I
emWeb              ( 7/ 95)        1235795        20743      ( 0/ 0)%   T 300
webJavaTask        (240/ 7)              0            0      ( 0/ 0)%
fmcHsTask          (100/ 60)              0            0      ( 0/ 0)%
apstatEngineTask   (240/ 7)              0            0      ( 0/ 0)%
rrcEngineTask      (240/ 7)              0            0      ( 0/ 0)%
spectrumDataTask   (255/ 1)        1614480           12      ( 0/ 0)%
spectrumNMSPTask   (255/ 1)          28808            3      ( 0/ 0)%
wipsTask           (240/ 7)              0            0      ( 0/ 0)%
tsmTask            (255/ 1)              0            0      ( 0/ 0)%
cids-cl Task       (240/ 7)              0            0      ( 0/ 0)%
ethoipSocketTask   ( 7/ 95)              0            0      ( 0/ 0)%
ethoipOsapiMsgRcv (240/ 7)              0            0      ( 0/ 0)%
--More-- or (q)uit
envCtrollerStatus (240/ 7)              0            0      ( 0/ 0)%
rfidTask           (240/ 7)              0            0      ( 0/ 0)%
idsTrackEventTask (239/ 8)              0            0      ( 0/ 0)%
DHCP Server        (240/ 7)              0            0      ( 0/ 0)%
bcastReceiveTask   (240/ 7)              0            0      ( 0/ 0)%
ProcessLoggingTask (240/ 7)              0            0      ( 0/ 0)%
CDP Main           (240/ 7)           3100           13      ( 0/ 0)%
sntpMainTask       (240/ 7)              0            0      ( 0/ 0)%
sntpReceiveTask    (240/ 7)              0            0      ( 0/ 0)%
cdpSocketTask      (240/ 7)              0            0      ( 0/ 0)%
grouping Task      (255/ 1)              0            0      ( 0/ 0)%
dot11a             (255/ 1)             63            3      ( 0/ 0)%
rrm Socket Task    ( 1/ 97)          35024            1      ( 0/ 0)%
rrm Socket Task    (255/ 1)          35024            1      ( 0/ 0)%
dot11a             (255/ 1)              0            0      ( 0/ 0)%
grouping Task      (255/ 1)              0            0      ( 0/ 0)%
dot11b             (255/ 1)            105            5      ( 0/ 0)%
rrm Socket Task    (255/ 1)          35024            1      ( 0/ 0)%
dot11b             (255/ 1)              0            0      ( 0/ 0)%
rrm Socket Task    (255/ 1)          35024            1      ( 0/ 0)%
apfPmkCacheTimer   (240/ 7)              0            0      ( 0/ 0)%
Apf Guest          (240/ 7)              0            0      ( 0/ 0)%
RLDP Schedule Task (240/ 7)              0            0      ( 0/ 0)%
--More-- or (q)uit
apfMsConnTask_5    (175/ 32)              0            0      ( 0/ 0)%
apfMsConnTask_4    (175/ 32)              0            0      ( 0/ 0)%
apfMsConnTask_6    (175/ 32)              0            0      ( 0/ 0)%
apfMsConnTask_7    (175/ 32)              0            0      ( 0/ 0)%
apfMsConnTask_3    (175/ 32)              0            0      ( 0/ 0)%
apfMsConnTask_2    (175/ 32)              0            0      ( 0/ 0)%
apfLbsTask         (240/ 7)              0            0      ( 0/ 0)%
apfMsConnTask_0    (175/ 32)              0            0      ( 0/ 0)%
apfMsConnTask_1    (175/ 32)              0            0      ( 0/ 0)%
apfProbeThread     (200/ 22)              0            0      ( 0/ 0)%
apfOrphanSocketTas (240/ 7)              0            0      ( 0/ 0)%
apfRogueDetectorTh (175/ 32)              0            0      ( 0/ 0)%
apfRogueTask       (240/ 7)              0            0      ( 0/ 0)%
apfOpenDtlSocket   (175/ 32)              0            0      ( 0/ 0)%
apfRLDP            (175/ 32)            424            1      ( 0/ 0)%
apfRLDPRecv        (175/ 32)              0            0      ( 0/ 0)%
apfReceiveTask     (175/ 32)              0            0      ( 0/ 0)%
mmMfpTask          (175/ 32)              0            0      ( 0/ 0)%
mmMobility         (240/ 7)           1272            3      ( 0/ 0)%
mmSSHPeerRegister (240/ 7)              0            0      ( 0/ 0)%
mmListen           (180/ 30)          99920          227      ( 0/ 0)%
tplusTransportThre (201/ 22)              0            0      ( 0/ 0)%
radiusCoASupportTr (201/ 22)              0            0      ( 0/ 0)%
--More-- or (q)uit
EAP Framework      (240/ 7)              0            0      ( 0/ 0)%
aaaQueueReader     (225/ 13)           3518           12      ( 0/ 0)%
radiusRFC3576Trans (201/ 22)              0            0      ( 0/ 0)%
radiusTransportThr (201/ 22)              0            0      ( 0/ 0)%
pemReceiveTask     (240/ 7)              0            0      ( 0/ 0)%
iappSocketTask     (240/ 7)              0            0      ( 0/ 0)%
ccxRmTask          (230/ 11)              0            0      ( 0/ 0)%
ccxS69Task         (240/ 7)            424            1      ( 0/ 0)%
ccxDiagTask        (240/ 7)              0            0      ( 0/ 0)%
ccxL2RoamTask      (240/ 7)         240424            3      ( 0/ 0)%
dot1xSocketTask    (240/ 7)              0            0      ( 0/ 0)%
Dot1x_NW_MsgTask_7 (240/ 7)              0            0      ( 0/ 0)%
Dot1x_NW_MsgTask_6 (240/ 7)              0            0      ( 0/ 0)%
Dot1x_NW_MsgTask_2 (240/ 7)              0            0      ( 0/ 0)%
Dot1x_NW_MsgTask_3 (240/ 7)              0            0      ( 0/ 0)%
Dot1x_NW_MsgTask_4 (240/ 7)              0            0      ( 0/ 0)%
Dot1x_NW_MsgTask_5 (240/ 7)              0            0      ( 0/ 0)%
Dot1x_NW_MsgTask_1 (240/ 7)              0            0      ( 0/ 0)%
Dot1x_NW_MsgTask_0 (240/ 7)            424            1      ( 0/ 0)%
dot1xMsgTask       (240/ 7)              0            0      ( 0/ 0)%
locpTxServerTask   (220/ 15)            408            2      ( 0/ 0)%
locpRxServerTask   (200/ 22)         428043         1961      ( 0/ 0)%
capwapSocketTask   ( 72/ 70)         303104          148      ( 0/ 0)%
--More-- or (q)uit
spamApTask6        (118/ 53)          25929           63      ( 0/ 0)%
spamApTask7        ( 53/ 78)          24233           59      ( 0/ 0)%
spamApTask5        (118/ 53)          23445           61      ( 0/ 0)%
spamApTask4        (118/ 53)          23513           58      ( 0/ 0)%
spamApTask3        (118/ 53)          19569           48      ( 0/ 0)%
spamApTask2        ( 53/ 78)          23809           58      ( 0/ 0)%
spamApTask1        ( 53/ 78)          22961           56      ( 0/ 0)%
spamApTask0        ( 78/ 68)          39189          106      ( 0/ 0)%
spamReceiveTask    (120/ 52)        2204024          252      ( 0/ 0)%
spamSocketTask     ( 32/ 85)              0            0      ( 0/ 0)%
Image License brok (240/ 7)              0            0      ( 0/ 0)%   I
Image License brok (240/ 7)             28            1      ( 0/ 0)%   I
IPC Main Thread    (240/ 7)              0            0      ( 0/ 0)%   I
License Client Lib (240/ 7)             96            1      ( 0/ 0)%   I
sshpmLscScepTask   (100/ 60)              0            0      ( 0/ 0)%
License Client Lib (240/ 7)             96            1      ( 0/ 0)%   I
sshpmLscTask       (100/ 60)          25783         1739      ( 0/ 0)%
sshpmReceiveTask   (175/ 32)           6697           66      ( 0/ 0)%
sshpmMainTask      (100/ 60)         208440          358      ( 0/ 0)%
mfpKeyRefreshTask (255/ 1)              0            0      ( 0/ 0)%
mfpEventTask       (255/ 1)              0            0      ( 0/ 0)%
mfpTrapForwardTask (255/ 1)              0            0      ( 0/ 0)%
clientTroubleShoot (100/ 60)        2841248            4      ( 0/ 0)%
--More-- or (q)uit
loggerMainTask     (200/ 22)              0            0      ( 0/ 0)%
debugMainTask      (200/ 22)              0            0      ( 0/ 0)%
dot3ad_lac_task    (240/ 7)          32901            3      ( 0/ 0)%
gccp_t             (240/ 7)           5864            5      ( 0/ 0)%
dot1dTimer         (240/ 7)              0            0      ( 0/ 0)%   T 300
dot1dRecv          (250/ 3)              0            0      ( 0/ 0)%
uart_session       (240/ 7)              0            0      ( 0/ 0)%
StatsTask          (240/ 7)              0            0      ( 0/ 0)%
fdbTask            (240/ 7)              0            0      ( 0/ 0)%
broffu_SocketRecei (100/ 60)             13            1      ( 0/ 0)%
SNMPProcMon        (240/ 7)              0            0      ( 0/ 0)%   T 300
RMONTask           ( 71/ 71)              0            0      ( 0/ 0)%   I
SNMPTask           (240/ 7)          61089         1064      ( 0/ 0)%
DHCP Socket Task   (240/ 7)              0            0      ( 0/ 0)%
DHCP Proxy Task    (240/ 7)              0            0      ( 0/ 0)%
dhcpClientTimerTas (240/ 7)              0            0      ( 0/ 0)%
DHCP Client Task   (240/ 7)              0            0      ( 0/ 0)%   T 600
BootP              (240/ 7)              0            0      ( 0/ 0)%   T 300
TransferTask       (240/ 7)            848            2      ( 0/ 0)%   I
osapiTimer         (100/ 60)          13024            2      ( 0/ 0)%   T 300
nim_t              (100/ 60)           2447            3      ( 0/ 0)%
dtlArpTask         ( 7/ 95)          98436            3      ( 0/ 0)%
dtlTask            (100/ 60)          41089           20      ( 0/ 0)%
--More-- or (q)uit
dtlDataLowTask     ( 7/ 95)              0            0      ( 0/ 0)%
sysapiprintf       (240/ 7)          22657            3      ( 0/ 0)%
osapiBsnTimer      ( 95/ 62)              0            0      ( 0/ 0)%
fp_main_task       (240/ 7)       153068796        26868      ( 0/ 0)%

Personal Data not working for an employee in ESS

Hai All,
I have configured Personal Data in ESS. But, for a particular employee Personal Data is giving the below mentioned error when he edits the data. The error happens when he edits and clicks on Review or when he clicks on the dropdown for Nationality(Only for this field, the error occurs) and selects a value from that dropdown.
As I searched in the forum, I found that we have to search ST22 for that user. In ST22, it is throwing 4 errors:
1. UNCAUGHT_EXCEPTION CX_HRPA_INVALID_INFOTYPE_DB. The exception 'CX_HRPA_INVALID_INFOTYPE_DB' was raised, but it was not caught anywhere along the call hierarchy. Termination occurred in the ABAP program "CL_HRPA_TIMECONSTRAINT========CP" - in "COMPUTE_INSERT". The main program was "SAPMSSY1 ".
2. SYSTEM_CANCELED. The current program "CL_HRPA_TIMECONSTRAINT========CP" has been terminated by another mode.
3. OBJECTS_OBJREF_NOT_ASSIGNED_NO CX_SY_REF_IS_INITIAL. Termination occurred in the ABAP program "SAPLHRXSS_PER_MAC" - in "HRXSS_PER_CLEANUP".
The main program was "SAPMSSY1 ".
4. SYSTEM_CANCELED. The current program "SAPLHRXSS_PER_MAC" has been terminated by another mode.
My questions are:
a Why it is not working for a particular employee?
b Why it is working for other employees?
c Did I miss out some configurations?
Please help me out.
Regards,
Jubish

Hai,
Thankyou for the reply. But the user has entry in the infotype. Likewise, it is possible to change data from PA30 transaction also. The problem occurs only when I try to change data through ESS.
Regards,
Jubish

Derivation Rules Not Working for other company codes

Hi,
I have 5 Company codes and only for one FM was activated. now i want to activate FM for all 5 company codes. for which i have assigned the FM area to all 5 company codes. I have also assigned the derivation strategy to all 5 company codes as well. now when i post a transaction for any other company code derivation rules is not being process hence no commitment item or fund center is derived. however for the original company code for which FM was activated in the first derivation rule are working fine means system is deriving commitment item and fund center. can any one tell me why derivation rules are not working for other company codes? do i have to add Company code in source field of derivation strategy? could this be the reason? because in beginning there was no other company code so we did not included any company code field in the first place.
Regards,

Faizan,
Go to Funds Management Government> Actual and Commitment Update/Integration> Activate/Deactivate Funds Management.
In the screen create an entry for each Company Code and Funds Management Area combination.
Activate the AA Derivtn flag if you want the derivation to be called and the Update flag if you want to update commitments and actuals in FM.
Thanks
Shyam

SM36/37: Specification "After Job" does not work for Daily "periodcity"

I reviewed http://help.sap.com/saphelp_nw04/helpdata/en/20/2d513897110872e10000009b38f889/content.htm, which states what I am trying to do should work, but it does not.
Here's the deal:
1. I have two jobs: "A" and "B".
2. "A" runs Daily.
3. I set-up job "B" to run "After job" "A" in my SM36 definition.
Job "B" will run the next day, but never runs again after that even though job "A" continues to run "Daily" as it should.
Further info:
1. We have "Event-triggered" jobs that run fine, but the "After Job" designation doesn't seem to work ongoingly.
2. I can review both jobs "A" and "B" for any "Predecessor" or "Successor" jobs, and, the first jobs to run after the initial set-up DO reference each other (in other words, let's say I schedule job "B" to run "After job" "A" on Tuesday. After Tuesday's run, Job "A" sees job "B" as it's "Successor" job and job "B" sees job "A" as it's "Predecessor" job), but the definition doesn't last into the next day ONLY FOR JOB "B" (as I mentioned, job "A" always runs fine).
3. I can't set the "periodcity" for job "B" because, once I flag it to run "After Job" "A", the "period" options disappear.
4. One final tidbit: the variant for job "B" has a "key date" specified so the date is dynamic for each day the job runs. I can set up job "B" to run "Daily" with this variant and it runs fine, but I wanted it to run AFTER job "A" so it never runs if job "A" doesn't run. (At this point, it's becoming a matter of principal!)
Here's my question:
Why won't job "B" continue to run "Daily" after job "A" (a "Daily" job) runs?
Thanks in advance,
Lara

Please close this thread since you posted the same question here:
[SM36/37: Specification "After Job" does not work for Daily "periodcity"|SM36/37: Specification "After Job" does not work for Daily "periodcity";

My itunes store will not open. : ( It has not worked for months. I have tried everything!

My itunes store will not open. It is a blank, white screen when I click on it. It has not worked for months. I have installed all software updates more than once during this time and there is still no change. I am using Mac OSX version 10.6.8 and itunes version 11.1.5. I have tried every solution I can find on the internet. Please help!

Hi Abeaze,
Welcome to the Support Communities!
The article below will get you connected with the iTunes Store Support. These folks can review your account with you:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/HT1933?viewlocale=en_US
Cheers,
- Judy

Export to powerpoint not working for certain views

Hi All,
I am in the process of implementation of STVN 2.1 Pre EHP3 version of Nakisa OrgChart for one of my clients.
During testing, it is observed that export to powerpoint object is not working for the following views.
1. Condensed Org. Chart
2. Compressed OrgChart -Only works when we expand at least one position
3. Horizontal OrgChart - Condensed children-Only works when we expand at least one position
In all the other views the export to Powerpoint object are working fine.
Export of powerpoint image is working in all the scenarios. We are facing issue only with powerpoint object.
I have implemented Export Pack 3.0 for OrgChart.
J. Thomas

Hi Luke,
Thanks for the response.
Yes...I have installed SP1.0. I have also applied Export Pack 3.0.
The following features are working fine.
1) Export to PDF
2) Export to JPEG
3) Export to Powerpoint Image.
Export to Powerpoint Object is also working fine if the style is 'Vertical'. The issue is only in case of 'Condensed', 'Compressed' and 'Horizontal OrgChart - Condensed children' sytles. Here again, if we expand at least one position, the export is working.
The error message that is flashed for the user is the usual one....pasted below.
Object Variable or With Blovk Variable Not Set.
Export To PowerPoint
Compatibility
We currently support:
Microsoft PowerPoint 2000 / 2002
Microsoft PowerPoint 2003
Note: To ensure compatability, you may be prompted to install "Service Pack 6 for Visual Basic Runtime." If so, you must accept the installation and once installed it may ask for a system reboot which you may ignore.
ActiveX Security
Depending on your browser settings, you may be prompted to install 'Nakisa Office Components.cab'. This is our ActiveX component that will allow you to use our Exporting functionality.
You may also be prompted to allow the ActiveX to run. If so, you must select 'Yes' to continue.
Note: If you are not prompted and the export fails to occur, please verify your Microsoft Office installation and verify your browser's ActiveX settings are set to 'Enable' or 'Prompt'.
In the log file, the following error message is displayed.
ERROR: ChartingXMLProcessor : generateLayoutXML : Unexpected XML declaration. The XML declaration must be the first node in the document, and no white space characters are allowed to appear before it. Line 1, position 5081.
Warm regards,
J. Thomas

TableView : sort = "SERVER" ...does not work for "TIME"

Hi,
TableView sort = "Server" works automatically for "Date" Fields and "Text" Fields.
But it does not work for "Time" field with data element "CDUZEIT". It shows the below error message:
Note
The following error text was processed in the system IFD : Invalid sort field type in "SORT ... AS TEXT".
The error occurred on the application server ifdmain_IFD_01 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Form: IF_HTMLB_ELEMENT_DELEGATED~DO_AT_END of program CL_HTMLB_TABLEVIEW============CP
Form: DELEGATED_END of program CL_HTMLB_ELEMENT==============CP
Form: IF_BSP_ELEMENT~DO_AT_END of program CL_HTMLB_TABLEVIEW============CP
Form: ONLAYOUT of program CLO27OLHO7EA9KVWPONPDC2NLTDFHCP
Form: %_ONLAYOUT of program CL_O27OLHO7EA9KVWPONPDC2NLTDFHCP
Form: DO_REQUEST of program CL_BSP_PAGE===================CP
Form: CALL_VIEW of program CL_BSP_PAGE_BASE==============CP
Form: CALL_VIEW of program CL_BSP_CONTROLLER=============CP
Form: DO_REQUEST of program ZCL_ZPR_C_ACTION_LOG==========CP
Form: DO_REQUEST of program CL_BSP_CTRL_ADAPTER===========CP
Thanks and Regards,
Bindiya

Welcome to SDN.
This problem and solution to it is exaplined in the following oss note number.
<a href="https://service.sap.com/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=893210&_NLANG=E">893210</a>
Regards
Raja

Review Process not working for me

Similar Messages

Maybe you are looking for