Revised --Image Upload--- Problem??

Hi again,
I'm posting a revised question, maybe that clarifies better.
We have a running Portal 3.0.7 with the default settings. We may upload any image (checked in WWDOC_DOCUMENT table), but the image files may not be shown in the portal(banner image, user picture..) Instead, on the related portal page a null image is shown.
It seems there is a configuration error?? To where I should look for it?
Ferhat
null

Just to clarify. You are adding images in the various edit wizards (e.g. in the edit banner wizard there is a field for the banner image) and these images get loaded, but not displayed. Is that correct?

Similar Messages

Image Upload Problems Today

Today, on two occasions I've gotten an error trying to upload an image from my local hard drive to a thread. Normally this has been working in IE9 for me, and in fact I've uploaded a number of images today successfully. It happened once with a PNG and once with a JPEG The reported problem, in the dialog the software puts up, was simply "Null".
Any number of retries to upload the same or different image results in the same failure.
I'm going to try uploading one of the very same images that failed before here. If it fails, I'll capture the screen and upload it to my site, then post a link here. If it succeeds, well, you'll just have to trust me that it happened.
Bah, of course it succeeds when trying to reproduce a failure.
Anyone else seeing image upload failures today?
-Noel

Likewise, I usually put up a lot of images.
Here are several, just as a test and so this thread isn't completely filled with just all this boring old text...
PNG:
JPEG:
GIF:
Image insertion seems to work fine today. The full moon WAS last night, after all...
-Noel

Multiple image upload problem

When trying to use the Multiple Image Upload feature I get this error
A script in this movie is causing Flash Player 9 to run slowly, if it continues your computer may become unresponsive. Do you want to abort the script?
This message pops up after a single file is uploaded, the second bar labeled progress remains at 0%.
I have experimented with this all day with no luck, any help would be great...
Forgot to mention, PHP/MYSQL
Also happens if I try multiple file upload vs. image.
I can't tell if it's ADDT or Flash, hopefully since they are both adobe someone can figure it out.
Thanks in advance...

Thanks for the reply, in this case it was a server setting that had to be modified. Mod_security would not allow folder creation by Apache. The single up loadd worked fine because it did not have to write a directory.
It did not show up in the server logs for some reason.
Hope this saves someone hours of trouble shooting.

IGS COnverted BMP Image upload problem in SE78

HI Friends,
I Converted the JPEG image into BMP ormat by using IGS. It is converting properly. i am able to see the BMP image. When i am trying to upload it through the SE78 i am getting the short dump.
If convert it manually, i am able to upload the image. i did not get the any difference between these two including file size, width and height.
I attached the shortdump and converted image file as an attachment. Can anyone give me inputs where i am missing the target.
Runtime error : COMPUTE_INT_TIMES_OVERFLOW
Exception : CX_SY_ARITHMETIC_OVERFLOW
Thanks ,
Srinivas Bhavanam

Hi Oisin,
Sorry for the Late Reply. I am using IGS 6.40 with solaris system.
If i am converting the image from my desktop i am getting 96DPI resolution. Where as if i am doing it from IGS i am getting 30682172 DPI resolution.
I am using SAP 4.7. Is it the latest patch level or latest IGS supported.
Short Dump :
Runtime Error          COMPUTE_INT_TIMES_OVERFLOW
Exception              CX_SY_ARITHMETIC_OVERFLOW
       Occurred on     03.03.2010 at   11:04:30
Whole number overflow on multiplication.
What happened?
Error in ABAP application program.
The current ABAP program "SAPLSTXBITMAPS" had to be terminated because one of
the
statements could not be executed.
This is probably due to an error in the ABAP program.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_ARITHMETIC_OVERFLOW',
was neither
caught nor passed along using a RAISING clause, in the procedure
"FILL_BMFILE_FROM_BMP" "(FORM)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
In the current program "SAPLSTXBITMAPS", multiplying the numbers 1207959552 and
100 (using the operation * or 'MULTIPLY') resulted in a value
greater than 2147483647 or smaller than -2147483648. This
results in a whole number overflow.
How to correct the error
The exception must either be prevented, caught within the procedure
"FILL_BMFILE_FROM_BMP"
"(FORM)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
You may be able to split the process into separate components, so that
the values generated are smaller.
If the error occurred in one of your own programs or in an SAP program
that you modified, try to correct it yourself.
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
   To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
   To obtain this, call the system log with Transaction SM21
   and select the "Print" function to print out the relevant
   part.
3. If the programs are your own programs or modified SAP programs,
   supply the source code.
   To do this, you can either use the "PRINT" command in the editor or
   print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
   or which actions and input led to the error.
System environment
SAP Release.............. "620"
Application server....... "EWR0R3DEV002"
Network address.......... "10.20.32.13"
Operating system......... "SunOS"
Release.................. "5.9"
Hardware type............ "sun4u"
Character length......... 16 Bits
Pointer length........... 64 Bits
Work process number...... 0
Short dump setting....... "full"
Database server.......... "EWR0R3DEV002"
Database type............ "ORACLE"
Database name............ "I07"
Database owner........... "SAPRGG"
Character set............ "C"
SAP kernel............... "640"
Created on............... "Mar 9 2009 21:04:19"
Created in............... "SunOS 5.8 Generic_117350-38 sun4u"
Database version......... "OCI_920 "
Patch level.............. "274"
Patch text............... " "
Supported environment....
Database................. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE
10.2.0.."
SAP database version..... "640"
Operating system......... "SunOS 5.8, SunOS 5.9, SunOS 5.10"
User, transaction...
Client.............. 999
User................ "SREDDY"
Language key........ "E"
Transaction......... "SE78 "
Program............. "SAPLSTXBITMAPS"
Screen.............. "SAPLSTXBITMAPS 4001"
Screen line......... 8
Information on where terminated
The termination occurred in the ABAP program "SAPLSTXBITMAPS" in
"FILL_BMFILE_FROM_BMP".
The main program was "SAPMSSCH ".
The termination occurred in line 1959 of the source code of the (Include)
program "LSTXBITMAPSF03"
of the source code of program "LSTXBITMAPSF03" (when calling the editor 19590).
Processing was terminated because the exception "CX_SY_ARITHMETIC_OVERFLOW"
occurred in the
procedure "FILL_BMFILE_FROM_BMP" "(FORM)" but was not handled locally, not
declared in the
RAISING clause of the procedure.
The procedure is in the program "SAPLSTXBITMAPS ". Its source code starts in
line 1843
of the (Include) program "LSTXBITMAPSF03 ".
Source code extract
019290     endcase.
019300   * compression
019310     perform bmptab_getdword_ofs tables bitmap_file
019320                                 using ofs bmp_compression.
019330     case bmp_compression.
019340       when c_bmp_compr_rgb.              "BI_RGB, uncompressed
019350       when c_bmp_compr_rle8. "BI_RLE8, 256 colors colormap, rle encoding
019360       when c_bmp_compr_rle4. "BI_RLE8, 16 colors colormap, rle encoding
019370       when others. message e872 raising bmperr_unsup_compression.
019380     endcase.
019390   * size of image
019400     perform bmptab_getdword_ofs tables bitmap_file
019410                                 using ofs bmp_sizeimage.
019420   * pix per meter X
019430     perform bmptab_getlong_ofs tables bitmap_file
019440                             using ofs bmp_xpelspermeter.
019450   * pix per meter Y
019460     perform bmptab_getlong_ofs tables bitmap_file
019470                             using ofs bmp_ypelspermeter.
019480   * colors used
019490     perform bmptab_getdword_ofs tables bitmap_file
019500                                 using ofs word.
019510   * colors important
019520     perform bmptab_getdword_ofs tables bitmap_file
019530                                 using ofs word.
019540     ofs_rgbquad = ofs_bitmapinfoheader + bmp_bisize.
019550   * now we have OFS_RGBQUAD    -> color table
019560   *             OFS_BITMAPDATA -> bitmap bytes
019570     otf_bminfo-new_rd_format = c_false.
019580     otf_bminfo-is_resident   = c_false.
>     otf_bminfo-dpi = ( bmp_xpelspermeter * 100 ) / 3937.
019600     perform bmp_adjust_dpi using otf_bminfo-dpi.
019610     otf_bminfo-w_pix = bmp_width.
019620     otf_bminfo-h_pix = abs( bmp_height ).
019630     otf_bminfo-w_tw = ( 1440 * otf_bminfo-w_pix ) / otf_bminfo-dpi.
019640     otf_bminfo-h_tw = ( 1440 * otf_bminfo-h_pix ) / otf_bminfo-dpi.
019650     case bmp_bitcount.
019660       when 1.
019670         otf_bminfo-bitsperpix = 1.
019680         otf_bminfo-bytes_per_row = otf_bminfo-w_pix div 8.
019690         rest = otf_bminfo-w_pix mod 8.
019700       when 4.
019710         otf_bminfo-bitsperpix = 4.
019720         otf_bminfo-bytes_per_row = otf_bminfo-w_pix div 2.
019730         rest = otf_bminfo-w_pix mod 2.
019740       when 8.
019750         otf_bminfo-bitsperpix = 8.
019760         otf_bminfo-bytes_per_row = otf_bminfo-w_pix.
019770         rest = 0.
019780       when 24.
Thanks & Regards,
Srinivas Bhavanam

Image Upload Problem

Hi To All
I am developing one employee application. in this, The employee has to register with my application. He has to provide all his details. And finally he has to upload jpeg/gif/png format picture. Everything is working good. But the problem is, the image size. When ever the user clicks on his profile, the image should be displayed. I don't know how to upload an image into database with fixed size. if that image is big, then it has to compress to my specified height and width.
If anyone knows this application, please help me. i am very thankful to you. Thanks in advance.

you'll need to first resize the thing yourself before storing it. No database is going to do that for you (though possibly it might be possible to write a stored procedure or trigger to do it for some database engines, but you'd still need to write that code).

Multiple Image upload problem in IOS

In my Application, I have to upload multiple pictures and I have used file upload control. Application is working fine in IE Browser, Safari (on Windows) and other browsers, but getting problem with the Safari (IOS), After uploading the second pictures, first pictures gets replaced by the new one. This seems to problem only with mobile safari ( on IPAD, IPHONE with IOS 6.1). I have used the standard code <input type=file accept="image/*">.
The flow is like, user will upload 4 pictures and then will hit the save button, but as I upload the another pictures, the other pictures gets refreshed and latest uploaded image is shown in All fields. But on Server correct file is uploaded. Can anyone help me on this Problem?

Apparently the problem is with the host. According to the
host I was trying to install this on, there is a security issue
with Flash upload programs and they don't allow them. So I tried a
different host (Jodohost) and it worked.

[locked] Image Upload Problem

Forum Admin:
FYI when attempting to change my profile pic this morning; It either errors out with this "The uploaded file could not be read as an image." or, just times out. Happens in the profile area and when attempting to attach an image to a post. Tried in both Google Chrome and Internet Explorer 8.

S.D.A. wrote:
I would but the term 'seamonkey' is derogatory. It hurts the feelings of
chimps like me, and I dislike Opera. Rock 'n Roll or Dancin music for me !
Steve... don't get hassled... you're not a 'seamonkey' you're a 'land' monkey. Totally different... It's like comparing seahorses and horses. So, don't worry about it.

Image Upload problems

Sometimes when we upload an image, the page tries to reload and wants us
to download the PHP file itself. There is an error in the upload
routine. I need to manually delete the record from the database before I
can open the page again. Sound familiar to anyone?
Alec
Adobe Community Expert

Seems to be related to the image dimensions. When one side approaches
2070px, the error occurs. For example, with one image, 2072x1378 uploads
fine, but 2073x1379 does not. With a different image 2071x1056 works
fine, but 2072x1057 does not. These are 8-bit JPGs.
Alec
Adobe Community Expert

Simple Image Upload Problem

Our users may add a logo to their content area. The logo is added as a file, and accessed from other pages using the technique described in the "Direct Access URL" online help.
The portal defeats this strategy, however, since the direct access URL changes each time the item is modified. I can see exactly what is happening in wwv_things, and it's disturbing since it occurs whether one edits or one removes and replaces the item.
What is the supported technique for accessing a folder item by name when the item name remains stable, but the file being accessed should change?

Hi smith,
Thanks for your reply.
Some one told me to do something like this. I am getting square with red X. I have the images folder with code.gif file with in the ImageExample Class.
import java.io.*;
import javax.servlet.*;
import javax.servlet.http.*;
import java.sql.*;
import javax.servlet.ServletException;
public class ImageExample extends HttpServlet{
public void doGet(HttpServletRequest req, HttpServletResponse res) throws ServletException, IOException{
res.setContentType("image/gif");
PrintWriter pw = res.getWriter();
pw.println("<html>");
pw.println("<body>");
pw.println("<img src=\"/images/code.gif\">");
pw.println("</body>");
pw.println("</html>");
pw.close();

Problem in Image uploading through a view -- URGENT

Hii Experts,
I am facing very strange problem while uploading a image file (.JPG file) thru a web dynpro view.
I am accepting a image file from view and uploading it to a ftp server.
There are two abnormal results I have observed. It does NOT happen for every image upload. But it has been observed to happen during peak Internet hrs. (image size can range from 1MB to 7-8 MBs)
When 'Upload' button is clicked, one of the following thing happens:-
1. After taking loooong time (processing circle rotates), browser screen goes totally blank. That is, browser goes into state as if no page is opened (white screen)
2. After taking loooong time, empty form re-appears. ( ie the view in which i had submitted data and pressed 'Upload')
I have tried tracing errors in default trace. but no error or exception is displayed !!!
Following is the code i'm using for uploading file. ==>
try {
URL myUrl = new URL("ftp://<some address>");
FtpURLConnection myConnection = new FtpURLConnection(myUrl);
myConnection.connect();
OutputStream out = myConnection.getOutputStream();
out.write(wdContext.currentPhotosElement().getPhoto1());
out.close();
myConnection.close();
} catch (Exception e) {
System.err.println("\n\n$$$$$$$$$$$$$Exception in image upload $$$$$$$$$$$$$\n\n");
e.printStackTrace();
Please help me as this system is live and lot of users are complaining as they are not able to upload their images..
Awaiting for reply ..
regards,
Amey
Edited by: Amey Mogare on May 28, 2008 2:14 PM
Edited by: Amey Mogare on May 28, 2008 2:17 PM

In SE78 when we click on the graphics and then click on the BMAP ( Bitmap Images ) then the bdc is not cathcing the screen and its giving an error
This is the error message which i am recieving in it .
00 343 S Cursor field RSTXT-TDNAME . does not exist in the screen
Please suggest me that is there any way for the same or else is there any BAPI for the same .
Regards
Shankar

Multiple image upload with save to database problem

I am developing some backend work for a client, and we recently used the Multiple image upload with save to database wizard without a problem. A few days later, we noticed that we could only upload a single file at a time - it seems that the coding is no longer able to access the flash part of this and is using the javasript function instead. I know the web hosting company has made some changes on the server, and I did some reearch and it seems that there could be an issue with Flash 10, but has anyone else experienced anything like this? Any help is greatly appreciated.
Thanks.
Jeremy

Thank you for the responses. I have already updated awhile ago, so I am wondering what happened. Not sure if during the server update, some files were replaced (unless I totally forgot to update to 1.0.1 on this site). So I reinstalled 1.0.1, deleted the includes folder from the server and uploaded my includes folder and it now works again.
Again, thanks for the help.
Jeremy

Multiple image upload with save to database wizard problem

hi,
i need to upload multiple images (6) in a table called pictures. i will need the names stored in the database and the files uploaded on the server. since i am new to dreamweaver i can not figure out on how to make this work.
the multiple image upload wizard uploads the images fine and creates a subfolder with the right id but i have no file names in the database at this point. i tried the multiple image upload with save to database wizard but i only get one upload button. it worked fine with one image but i need 6 pics uploaded. the i tried to first upload the pictures with the multiple image upload wizard and use the update wizard to add the names afterwards but that did not work either. hmm. would be great if someone could help me out.
thanks, jan

Thank you for the responses. I have already updated awhile ago, so I am wondering what happened. Not sure if during the server update, some files were replaced (unless I totally forgot to update to 1.0.1 on this site). So I reinstalled 1.0.1, deleted the includes folder from the server and uploaded my includes folder and it now works again.
Again, thanks for the help.
Jeremy

Image / video upload problem to any website using a flash uploader...

Hello, thanks for reading. For the last month or so ive been having major issues uploading photos and videos to websites such as facebook, istock, photobucket, youtube etc.. all of them as far as i can tell use flash to upload, but all of them error. Facebook, when uploading images uploads them, but puts grey bars or whole sections in the image, like its corrupted, and with videos, just errors every time. Istockphoto.com puts coloured bars through the images if they upload at all, and normally goes to a server time out page. Photos bucket does the same as facebook, grey sections in the images, and youtube wont upload anything, unless i use the bulk uploader.
It happens on firefox, safari and opera, and im running the most recent version of all of them.
It is like my broadband connection isnt fast enough so it times our or something, but i have a very fast connection, and ive now tried it at three different locations all with the same result.
Ive updated my flash, and im running version MAC 10,0,22,87
Im running java version 1.5.0_19 form apple (am currently downloading 1.6.0 update today) would this make a difference?!
Everything used to be fine, its so frustrating! Any help would be greatly appreciated!
Many thanks
Tim

The latest version of Flash is:
Adobe Flash Player version 10.0.32.18
http://get.adobe.com/flashplayer/

Image Upload - File Size Problem

Hi,
I have created an asp image upload page using the toolbox - everything works perfectly unless the image size is over 200KB. If an image is uploaded that exceeds 200KB then the page just empties all of the fields with no error message. I have set the limit within the image upload transaction to 3000KB. Is there something I have to do on IIS to allow larger file size uploads?
Many thanks in advance
Scott

hello friend.
a simple solution to this..
are u using win2k3 ?
i mean whats ur IIS version..
if its IIS 6 then
1.> first go to IIS server for the MMC
2.> then right click and select the box which says allow metabase to be edited while IIS is running..
3.>go to just go fire ur dreamweaver and browse open this folder.
c:\windows\system32\inetsrv\metabase.xml
is also called systempath on system drive
changed this value
of AspMaxRequestEntityAllowed
to
="1073741824"
it should look like this.
AspMaxRequestEntityAllowed="1073741824"
if there are mutiple enteries in the XML file u can safely change all these to the same value.
Enjoy
Moh!
http://www.mohitech.com
Sorry if there are spelling /grammar mistakes.. i dont bother to correct them :)

Can you move a 'Multiple Image Upload' button into the 'Update Form'?

I am able to creat and an Update form and an image upload using the "Update Form Wizard" tool and the "Multiple Image Upload" tool succesfully.
<br />
<br />The problem comes when I try to move the "UPLOAD" button inside the Update form. Right now it looks like this:
<br />http://www.webritesolutions.com/Test/upload/now.JPG
<br />
<br />This is how I would like it to show:
<br />http://www.webritesolutions.com/Test/upload/tryingto.JPG
<br />
<br />I want to "Upload" button to go next to the "Update record" button. When I do this I get a javascript error and the "Update record" button is disabled.
<br />Here is the code of what I tried to do:
<br />
<br />
<br />
<br />
<br />
<table>
<tr class="KT_buttons">
<td>
<?php<br /> // Multiple Upload Helper<br /> echo $muploadHelper->Execute();<br /> ?>
</td>
<td colspan="1">
<input type="submit" name="KT_Update1" id="KT_Update1" value="Update record" />
<br /></td>
</tr>
</table>
<br />
<br />Here is the Javascript error:
<br />http://www.webritesolutions.com/Test/upload/error.JPG
<br />
<br />thanks for your help.

A control can only appear once in the visual tree. So you have to remove it from the Grid before you can add it to the DockPanel.
This code will move the Border element from the Grid to the DockPanel when you click the button:
Private Sub Button_Click(sender As Object, e As RoutedEventArgs)
Dim border = CType(LayoutRoot.FindName("myborder"), Border)
LayoutRoot.Children.Remove(border)
contain.Children.Add(border)
End Sub
<StackPanel>
<Grid x:Name="LayoutRoot">
<Border x:Name="myborder" BorderBrush="Black" BorderThickness="2">
<TextBlock>...</TextBlock>
</Border>
</Grid>
<DockPanel x:Name="contain" Background="Yellow">
<TextBlock>2</TextBlock>
</DockPanel>
<Button Click="Button_Click" Content="Move"/>
</StackPanel>
You can try it for yourself. But please post your code as formatted text and not as embedded images if you want anyone to be able to reproduce your issue and help you in the future.
Please remember to close your threads by marking helpful posts as answer.

Revised --Image Upload--- Problem??

Similar Messages

Maybe you are looking for