Revised IT Slab and Int From House Property not coming properly

Dear Experts ,
    I have applied the SAP Note of Legal Budget Changes 2014 - 2044885 & 2041819. After applying that ,We are not getting the correct Tax Deduction and income from House Property(Self Occupied). We have maintained the IT 0584 as 200000/- for sec 24 deduction.
Please find below the screenshot of the RT and give your inputs on same.
Thanks
Praveen

check the note 870126

Similar Messages

  • HT203167 I had to replace my harddrive on my IMAC and downloads from ITUNES do not show up. How do I restore my previous library?

    I had to replace my harddrive on my IMAC and downloads from ITUNES do not show up. How do I restore my previous library?

    It has always been very basic to always maintain a backup copy of your computer for this very occasion.  Use your backup copy to put everything back.
    If for some reason you have failed to maintain a backup copy, not good, then you can redownload some itunes purchases in some countries:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • I'm attempting to create a pdf from InDesign and the Illustrator image does not appear properly.

    I'm attempting to create a pdf from InDesign and the Illustrator logo does not appear properly. The logo has a light blue color background with a black to white gradiant over it with a multiply designation set at 100%.  I flattened the logo in illustrator before importing into InDesign. When the pdf is created, the blue background of the logo drops out and the only thing showing is the graduated screen of black. PLEASE HELP!!!!!!

    Thanks for your reply Peter,
    I'm on Mac OSX (10.5.8) using Acrobat 7 Professional and Acrobat 
    Reader 9 to view the pdf. I created it by exporting. Attached is a 
    screen capture of the letterhead. Since I posted, I sent a test pdf to 
    my partner's computer eventhough it didn't look right on my system and 
    she said it looked fine to her. I've restarted my computer and tried 
    again and still get the same results.
    Thanks for your help,
    Pat Boullion
    Boullion Graphics
    281 444-5749
    Fax: 281 444-6507
    CONFIDENTIALITY NOTICE
    The information in this email may be confidential and/or privileged. 
    This email is intended to be reviewed by only the individual or 
    organization named above.
    If you are not the intended recipient or an authorized representative 
    of the intended recipient, you are hereby notified that any review, 
    dissemination or copying of this email and its attachments, if any, or 
    the information contained herein is prohibited. If you have received 
    this email in error, please immediately notify the sender by return 
    email and delete this email from your system.

  • After update to IOS 4.3.5 my Iphone incoming and out going calls is not working properly and I have to remove the SIM regulerly to conduct or receive a call

    after update to IOS 4.3.5 my Iphone incoming and out going calls is not working properly and I have to remove the SIM regulerly to conduct or receive a call
    It is not practicale to do this always any one faces the same problem

    There may be a problem with the SIM card. Get a new SIM card from your carrier - there should be no charge for a replacement.
    If no change with a new SIM card, the standard troubleshooting steps in order are:
    Power your iPhone off and on.
    An iPhone reset, which is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously until you see the Apple logo and then release.
    Restore your iPhone with iTunes from your iPhone's backup.
    Restore your iPhone with iTunes as a new iPhone or not from your iPhone's backup.
    If no change after any of these steps in order, your iPhone has a hardware problem.

  • Outlook 2013 are not opening and showing pst files are not closed properly

    Hi
    Outlook 2007 has stopped working and showing close the program. Again,we re-started then outlook 2007 and it has opened and taken the backup of pst files in a separate hard drive.
    The pst file was repaired in scanpst.exe and again i have tried to put the pst file back in outlook 2007.It was hanging and suddenly i have uninstalled 2007 and started installing outlook 2013.
    2013 applications like word,excel,power point are opening and outlook 2013 are not able to open and showing pst files were not closed properly.
    Again i have un-installed and re-installed the outlook 2013.still we are not able to open the outlook.
    Need your support at the earliest to fix the issue.
    Thanks

    Hi,
    What's the .pst file used for? Archive? Or you set up a POP3 account and want to import the emails from the .pst file?
    Another question, you mentioned you installed Outlook 2013 and it didn't open either. Was this from the beginning right after you installed Outlook 2013, or after you did something such as create a new Profile, set up a new account and tried to import the
    .pst file?
    Kindly answer my questions so I can understand the situation better.
    I've seen some of this issue caused by the anti-malware software, check your anti-malware software to see if it's trying to interfere with Outlook - things like real time email checking can sometimes cause these kinds of problems. To troubleshoot, we can
    simply disable the anti-malware software temporarily to see the result.
    Regards,
    Melon Chen
    TechNet Community Support

  • I have a Linksys WRV200 wireless router and the wireless signal is not working properly so I cannot connect to the internet wirelessly. the wireless light has a fast green blinking light. how can I fix the router?

    I have a Linksys WRV200 wireless router and the wireless signal is not working properly so I am unable to connect to the internet wirelessly.  The wireless light is blinking green very quickly and I connect and disconnect from the network constantly.  How do I get the router to work properly

    Hello James,
    The flashing WLAN light means activity (data getting transferred). Try disconnecting all your devices and check whether the light is still flashing or disconnect the router from internet and do the check.
    Do you have your SSID as linksys or the default one? If your neighbor has the same SSID, then traffic could result from your neighbor's one. Try changing your SSID and password. Make your security WPA/WPA2.
    Hope this helps,
    Thanks
    Vijay

  • I have a copy of Web Premium CS3 which was installed on a Windows Vista PC.  I have a new Windows 7 PC and the installation disc will not run properly.  The installation begins and then asks for the CS3 disc to be inserted.  If I re-insert the CD I just g

    I have a copy of Web Premium CS3 which was installed on a Windows Vista PC.  I have a new Windows 7 PC and the installation disc will not run properly.  The installation begins and then asks for the CS3 disc to be inserted.  If I re-insert the CD I just get a message asking for the disc to be inserted.  any ideas anyone?

    Use the download version:
    Download CS3 products
    Mylenium

  • Left and right arrow keys are not working properly now

    I searched the forum and didn't see this posted. My left and right arrow keys are not working properly now.
    For example, when typing, left arrow does not produce the desired action (move cursor one spot to the left), and right arrow does not produce the desired action (move cursor one spot to the right). Also, control + left no longer activates spaces, and control + right no longer activates spaces.
    Interestingly, in investigating the problem, I noticed that my shortcut keys for activating spaces and for activating expose had been changed (software update?). Before, I had set F5 (without pressing fn) for expose and had set F6 (without pressing fn) for spaces. Now, I noticed spaces was set back to the default of F8 (requiring fn).
    The issue persists after shut down, and even when logged on to other users, e.g. Guest.
    All other keys seem to be working fine, including the up and down arrows.
    I don't think it's a cleaning issue because fn + left + right produces the "[" character on the screen.
    Any ideas?

    I'm having the same type of issue on my MacBook except not with arrow keys. The volume keys do different things when I click on them. For example, the mute key brings up the dashboard and the volume up key makes all the open screens smaller (don't know what this feature is called). I did a software update then restarted the computer when this starting happening. Any help would be greatly appreciated, thanks.

  • "Show my windows and tabs from last time" not working, Mac OS 10.6.4, FF 3.8.10 or FF 4 Beta 6

    I have tried any number of times to get this to work, but it's still not working. On my other Mac with OS 10.6.4 and FF 3.6.8/10 the "show my windows and tabs from last time" is working just fine.
    I have checked some of the settings in about:config per some of the other forum posts with resolution to this issue, but this hasn't worked for me. Especially Since some settings have changed in the more recent versions of FF.
    I'm pretty sure my settings are correct. Is anyone else having this same issue?
    On the Mac exhibiting the issue it prompts me if I want to close all open tabs when the red X is clicked, when I quit firefox it keeps my tabs open just fine when firefox starts up the next time. This is normal behavior, but when the feature in question is active it overrides this behavior, on my other mac, and just stores my last session so that when I open firefox all is as it was before it was closed (either closing it via quit or with the red X will do the trick).
    On my new mac, the prompt to close open tabs never goes away and my tabs just vanish, whichever way I close firefox.
    I hope that was clear enough. Thanks for any help.

    See http://kb.mozillazine.org/Session_Restore
    If you use [[Clear Recent History]] in Firefox 3.5 and later to clear the 'Browsing History' when you close Firefox then restoring tabs from the last session ("Save & Quit" or "Show my windows and tabs from last time") doesn't work.

  • Why do files (UPS labels) from the Internet not print properly (they used to), unless they're saved as PDFs and then printed?

    Files from the Internet (for example a UPS label) no longer print properly (too light, faded out), whereas they used to print just fine directly from the Internet source. The only way they print properly now is to save the file as a PDF and print from that. So I'm think it's not the Canon printer. This hasn't happened before, and I'd like to know what I can do about it, what's going on. This is via Firefox and Safari on my Mac laptop, OS 10.6.8.
    Thanks, David Smoak

    2) Thanks for the tip. It isn't what I had in mind, but writing scripts to do the work (via tells to "System Events") and then invoking those scripts with osascript is indeed a reasonable solution.
    3) You may not have understood me. The only peculiarity is that I sometimes see "Enable Folder Actions" in the menu even when Folder Actions are, in fact, globally enabled, so that I should instead be seeing "Disable Folder Actions" along with "Remove a Folder Action" and so forth. As you say, I always see "Configure Folder Actions...". Surely this is just a minor bug.
    As far as the main issue, I don't believe I have any code that activates the Finder. My original message has a sample of one of my scripts, and you can see that it doesn't mention the Finder at all. As I said, I get the same behavior with the sample Folder Action scripts in /Library. As one more test, I tried a absolutely empty script---the Script Editor window contains not a single glyph when I save it. If I attach this completely empty script as a Folder Action to a folder, any addition or deletion from that folder activates the Finder, though nothing else happens. Still looking for help on this one!

  • How to Clear Iphoto and Rebuild from another file, not Iphoto Library?

    I have over 7000 images. Some of the Iphoto thumbnails are from my desktop file and some from the DATA file copied into Iphoto. I want to rebuild my thumbnails using all of the pictures on my desk top, not copying them/duplicating into Iphoto. The reason I want to rebuild Iphoto is years ago while copying and moving pictures on another PC the picture data was deleted and the date data of the pics was lost. If I load the images, Iphoto mixes the images up. I have organized all the pics on my desktop into folders by month and year. When I tried to rebuild, old photos show up again so I deleted the original Data (photos) in Iphoto and after rebuilding they reappeared with many images just black boxes. I was expecting a blank page so I could start to build the thumbnails from my desktop folders.
    How do I get a blank screen/no images in Iphoto? Select all the images and drag to trash? To be safe I have all my pictures saved on 2 ext hard drives. Also can a select a group (i.e. by month) and change all the date info at one time?
    If you can help...THANKS

    BgMc
    It’s difficult to advise you because you’re using non-standard terms. I’m worried that if I misunderstood something that I might give you a bum steer.
    Some general principles: Don’t “clear iPhoto”. Instead make a new Library: Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'.
    When you have this new Library working you can delete the old one.
    In general, if you have a Folder of images and you drag them to the Source (or left-hand) Pane in iPhoto the pics will be imported and a new Album and Roll will be created. This may help.
    Some of the Iphoto thumbnails are from my desktop file and some from the DATA file copied into Iphoto.
    I have no idea why you would want thumbnails. Surely you want the full sized files? What’s a desktop file? Do you mean Desktop Folder?, also what’s a DATA file?
    I want to rebuild my thumbnails using all of the pictures on my desk top, not copying them/duplicating into Iphoto.
    This makes no sense to me. Why are you rebuilding thumbnails? And if you don’t want to use iPhoto then why are you posting here?
    so I deleted the original Data (photos) in Iphoto and after rebuilding they reappeared with many images just black boxes
    Here’s a really good general principle:
    Don't change anything in the iPhoto Library Folder via the Finder or any other application. iPhoto depends on the structure as well as the contents of this folder. Moving things, renaming things or otherwise making changes will prevent iPhoto from working and could even cause you to damage or lose your photos.
    Regards
    TD

  • When moving a page from one pdf to another I see a message "consolidating fonts" and the added page does not view properly

    I am working with multiple PDF files in Acrobat Pro XI.  Sometimes when I move a page from one PDF to another it does not view properly.  It was fine in the source PDF, but not when moved to the desired PDF.  I also see a message momentarily across the bottom of my screen that says "consolidating fonts".  What must I do to fix this?

    Lloyd ,
    Follow these steps for Acrobat 11 .
    Launch Acrobat>Tools>Print Production>Acrobat Distiller
    Now in Acrobat Distiller follow these.
    Select Standard in Default settings. 
    Go to Settings and select Edit Adobe PDF Settings. 
    Select Fonts and in the font source window select the fonts you want to Add. 
    Click Save As and then OK.
    See if this helps.
    Regards
    Sukrit Dhingra

  • Drag and relate from User query not working as expected

    Hi All,
    Could anyone shed some light on why using drag and relate from a user query is not working for me?
    Drag and relate works well from all system generated queries, but not from my user queries.
    For example:
    - System query/report - running a system stock report and dragging the 'Item number' field result to a D&R Sales Order generates a report of all Sales Orders for the selected Item Number. As expected - success.
    - User Query - running a item lookup report from a user generated query and then D&R to Sales order for the selected Item Number does not work. Error = 'No matching records found (ODBC -2028) [message 131-183]
    Any ideas?
    Best regards,
    John

    Hi John,
    I believe Drag and relate only works for system form.  The whole function is hard coded.  It will not work for any queries including system queries.
    Thanks,
    Gordon

  • Can't find the set up ipad    Need to reboot the system and recover from icloud but not sure how to do this

    Not certain how to reboot the ipad.   Had some instructions but alas stumped on set up.   I have backed up in ICloud but need to get to a "set up"process

    You restore from an iCloud  backup on the iPad itself. You have to reset the iPad in the settings app. Settings>General>Reset>Erase All Content and Settings. You will then be starting from the beginning - you will be setting the iPad up all over again.
    This article explains how to do it.
    http://gigaom.com/apple/ios-101-set-up-and-restore-from-icloud-backup/

  • Imported SVG from Edge Animate not rendering properly in Safari

    Hi,
    We are having problems with an animation we created in Edge Animate, when we import it into Adobe Muse and then view it in Safari it becomes jagged and doesn't render properly.
    It works perfectly on Chrome, Firefox and when using a retina screen.
    We are using CC 2014 version now, previously when we used the old version of CC it worked on all browsers.
    Is there any settings we need to change when exporting from Edge or importing into Muse?
    Here is the link to the Animated SVG: Spining Wheel

    Thanks vivekuma that seems to work now using the below steps.
    1. In "Position and Size" subsection of the property panel, note down somewhere, the values of "X", "Y", "W" & "H" of an svg file used on stage.
    2. In "Transform" subsection of the property panel, change the CSS Transform ScaleX and ScaleY from 10% to 100%.
    3. The above change will change the values for "X", "Y", "W" & "H". So, you have to set their values as you have noted down in the first step.
    4. Repeat the first 3 steps for every svg file used on stage.

Maybe you are looking for